Received: by 2002:a5b:505:0:0:0:0:0 with SMTP id o5csp874971ybp; Fri, 11 Oct 2019 05:51:32 -0700 (PDT) X-Google-Smtp-Source: APXvYqwrZhqbNyILPNyL6F3Stn8zQuDo54QgOWEB58ubS/wXGkSEcxp02ppTCt6cQj0iAXdnjwf0 X-Received: by 2002:a17:907:393:: with SMTP id ss19mr13434290ejb.62.1570798291906; Fri, 11 Oct 2019 05:51:31 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1570798291; cv=none; d=google.com; s=arc-20160816; b=AMAB7VZWa/S+nlw581URJhUZh114o1eXhzPeV2+4vPX/7NH1ELdFf0TaRp31wCJd6p lNDRZajQbPqOqvfZGnQl+4tpK+8W4axTA7/he80k5Dtd84szo7KuttjjlfD/hLV3LmG5 8RCXlVNT/fbuGWz16TBZ1jnKeHw0Ngl6f++W7jGtJuuL5DWOMfHeWSdD1Ig7GhiqXZNv h7eS7TwJXHf98zeBLX/hJDf/hlsEgJRHrhVDDP4byfZOrlo4R4EsG2D+eBlDGWSZ9wTT xae5VPnAyvrsmQnVw1QTGCn92yChB2hXhOZe1lCgXdvpVaWGCirfcWlNUiIs3QxKBOOW Jw1Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from; bh=Y2o4IsYx+QSAWdEmVMu32eaFkzuG0ovWHtM/k2uZjhQ=; b=buHWsULF2A3XCUc4tVCY69hhVy4WZRhfhtfqt/m1eR3sd6hI2SExrKJ8DXrbv+75as Egn5zQfdZoQbuVOULOLkdIfIIPqtDOkqWFrRGpyHzTTtHm0oCZMqyofSfbJjWrJ/DLLW gaI/wYlDaAI9slTYLmRPznHODV3NMxaq1DI+JNGFtfkdhmiQxceoP5Fbs4cMle+qrR1Q J4emITgCEfNOxGsuG1GiRfWGhQVG/abr1arhSsmAiIiKSWP3r0Ba9qMkhi3hGra1qFWZ x3xXVhKhBBK7e1CFKwinnw+5XckzL/pSFMuaoxDTVcX359OVj46/yX+BD1L/sXRWiLbn T9yw== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id 27si5168348edz.186.2019.10.11.05.51.07; Fri, 11 Oct 2019 05:51:31 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728202AbfJKMuv (ORCPT + 99 others); Fri, 11 Oct 2019 08:50:51 -0400 Received: from relay11.mail.gandi.net ([217.70.178.231]:45759 "EHLO relay11.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728094AbfJKMuu (ORCPT ); Fri, 11 Oct 2019 08:50:50 -0400 Received: from localhost (aclermont-ferrand-651-1-259-53.w86-207.abo.wanadoo.fr [86.207.98.53]) (Authenticated sender: kamel.bouhara@bootlin.com) by relay11.mail.gandi.net (Postfix) with ESMTPSA id 2AEB910000B; Fri, 11 Oct 2019 12:50:46 +0000 (UTC) From: Kamel Bouhara To: Rob Herring , Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , linux-arm-kernel@lists.infradead.org Cc: Thomas Petazzoni , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Kamel Bouhara , =?UTF-8?q?K=C3=A9vin=20RAYMOND?= , Mickael GARDET Subject: [PATCH 3/3] ARM: at91: add Overkiz KIZBOX3 board Date: Fri, 11 Oct 2019 14:50:22 +0200 Message-Id: <20191011125022.16329-4-kamel.bouhara@bootlin.com> X-Mailer: git-send-email 2.23.0 In-Reply-To: <20191011125022.16329-1-kamel.bouhara@bootlin.com> References: <20191011125022.16329-1-kamel.bouhara@bootlin.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a common DT include file for the Kizbox3 boards. Add the devicetree for the Kizbox3 HS board. Signed-off-by: Kamel Bouhara Signed-off-by: Kévin RAYMOND Signed-off-by: Mickael GARDET --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-kizbox3-hs.dts | 309 ++++++++++++++++ arch/arm/boot/dts/at91-kizbox3_common.dtsi | 412 +++++++++++++++++++++ 3 files changed, 722 insertions(+) create mode 100644 arch/arm/boot/dts/at91-kizbox3-hs.dts create mode 100644 arch/arm/boot/dts/at91-kizbox3_common.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b21b3a64641a..3bda216c41be 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -46,6 +46,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ + at91-kizbox3-hs.dtb \ at91-nattis-2-natte-2.dtb \ at91-sama5d27_som1_ek.dtb \ at91-sama5d2_ptc_ek.dtb \ diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts new file mode 100644 index 000000000000..8734e7f8939e --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon + * Kevin Carli + * Mickael Gardet + */ +/dts-v1/; +#include "at91-kizbox3_common.dtsi" + +/ { + model = "Overkiz KIZBOX3-HS"; + compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5"; + + pwm_leds { + status = "okay"; + + red { + status = "okay"; + }; + + green { + status = "okay"; + }; + + blue { + status = "okay"; + }; + + white { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_red + &pinctrl_led_white>; + status = "okay"; + + red { + label = "pio:red:user"; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + white { + label = "pio:white:user"; + gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default" , "default", "default", + "default", "default" ; + pinctrl-0 = <&pinctrl_key_gpio_default>; + pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>; + pinctrl-2 = <&pinctrl_pio_io_boot + &pinctrl_pio_io_reset + &pinctrl_pio_io_test_radio>; + pinctrl-3 = <&pinctrl_pio_zbe_test_radio + &pinctrl_pio_zbe_rst>; + pinctrl-4 = <&pinctrl_pio_input>; + + SW1 { + label = "SW1"; + gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; + linux,code = <0x101>; + wakeup-source; + }; + + SW2 { + label = "SW2"; + gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + wakeup-source; + }; + + SW3 { + label = "SW3"; + gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + wakeup-source; + }; + + SW7 { + label = "SW7"; + gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>; + linux,code = <0x107>; + wakeup-source; + }; + + SW8 { + label = "SW8"; + gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>; + linux,code = <0x108>; + wakeup-source; + }; + }; + + gpios { + compatible = "gpio"; + status = "okay"; + + rf_on { + label = "rf on"; + gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + wifi_on { + label = "wifi on"; + gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_test_radio { + label = "zbe test radio"; + gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + zbe_rst { + label = "zbe rst"; + gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_reset { + label = "io reset"; + gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_test_radio { + label = "io test radio"; + gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_0 { + label = "io boot 0"; + gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + io_boot_1 { + label = "io boot 1"; + gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>; + output; + init-low; + }; + + verbose_bootloader { + label = "verbose bootloader"; + gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>; + input; + }; + + nail_bed_detection { + label = "nail bed detection"; + gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>; + input; + }; + + id_usba { + label = "id usba"; + gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>; + input; + }; + }; +}; + +&pioA { + pinctrl_key_gpio_default: key_gpio_default { + pinmux= , + , + , + , + ; + bias-disable; + }; + + pinctrl_gpio { + pinctrl_pio_rf: gpio_rf { + pinmux = ; + bias-disable; + }; + pinctrl_pio_wifi: gpio_wifi { + pinmux = ; + bias-disable; + }; + pinctrl_pio_io_boot: gpio_io_boot { + pinmux = + , + ; + bias-disable; + }; + pinctrl_pio_io_test_radio: gpio_io_test_radio { + pinmux = ; + bias-disable; + }; + pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio { + pinmux = ; + bias-disable; + }; + pinctrl_pio_zbe_rst: gpio_zbe_rst { + pinmux = ; + bias-disable; + }; + /* stm32 reset must be open drain (internal pull up) */ + pinctrl_pio_io_reset: gpio_io_reset { + pinmux = ; + bias-disable; + drive-open-drain = <1>; + output-low; + }; + pinctrl_pio_input: gpio_input { + pinmux = + , + , + ; + bias-disable; + }; + }; + + pinctrl_leds { + pinctrl_led_red: led_red { + pinmux = ; + bias-disable; + }; + pinctrl_led_white: led_white { + pinmux = ; + bias-disable; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&flx0 { + status = "okay"; + + uart5: serial@200 { + status = "okay"; + }; +}; + +&flx3 { + status = "okay"; + uart6: serial@200 { + status = "okay"; + }; +}; + +&flx4 { + status = "okay"; + + i2c2: i2c@600 { + status = "okay"; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi new file mode 100644 index 000000000000..299e74d23184 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3 + * family SoC boards + * + * Copyright (C) 2018 Overkiz SAS + * + * Authors: Dorian Rocipon + * Kevin Carli + * Mickael Gardet + */ +/dts-v1/; +#include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" +#include +#include +#include +#include + +/ { + model = "Overkiz Kizbox3"; + compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + }; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = "serial1:115200n8"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + vdd_adc_vddana: supply_3v3_ana { + compatible = "regulator-fixed"; + regulator-name = "adc-vddana"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_adc_vref: supply_3v3_ref { + compatible = "regulator-fixed"; + regulator-name = "adc-vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pwm_leds { + compatible = "pwm-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm_h0 + &pinctrl_pwm0_pwm_h1 + &pinctrl_pwm0_pwm_h2 + &pinctrl_pwm0_pwm_h3>; + status = "disabled"; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + status = "disabled"; + }; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + + white { + label = "pwm:white:user"; + pwms = <&pwm0 3 10000000 0>; + max-brightness = <255>; + status = "disabled"; + }; + }; +}; + +&ebi { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@3 { + pinctrl-0 = <&pinctrl_ebi_nand_addr>; + pinctrl-names = "default"; + reg = <0x3 0x0 0x800000>; + + atmel,rb = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + u-boot@20000 { + label = "u-boot"; + reg = <0x20000 0x140000>; + }; + + u-boot-factory@160000 { + label = "u-boot-factory"; + reg = <0x160000 0x140000>; + }; + + ubi@2A0000 { + label = "ubi"; + reg = <0x2A0000 0x7D60000>; + }; + }; + + }; +}; + +&rtc { + status = "okay"; +}; + +&pioA { + pinctrl_ebi_nand_addr: ebi-addr-1 { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_usart { + pinctrl_usart_0: usart0-0 { + pinmux = < PIN_PB26__URXD0>, ; + bias-disable; + }; + pinctrl_usart_1: usart1-0 { + pinmux = < PIN_PD2__URXD1>, ; + bias-disable; + }; + pinctrl_usart_2: usart2-0 { + pinmux = < PIN_PD4__URXD2>, ; + bias-disable; + }; + pinctrl_usart_3: usart3-0 { + pinmux = < PIN_PC12__URXD3>, ; + bias-disable; + }; + pinctrl_usart_4: usart4-0 { + pinmux = < PIN_PB3__URXD4>, ; + bias-disable; + }; + pinctrl_flx0_default: flx0_usart_default { + pinmux = , //TX + ; //RX + bias-disable; + }; + pinctrl_flx3_default: flx3_usart_default { + pinmux = , //RX + ; //TX + bias-disable; + }; + }; + + pinctrl_flx4_default: flx4_i2c2_default { + pinmux = , //DATA + ; //CLK + bias-disable; + drive-open-drain = <1>; + }; + + pinctrl_pwm0 { + pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 { + pinmux = ; + bias-disable; + }; + pinctrl_pwm0_pwm_h1: pwm0_pwmh1 { + pinmux = ; + bias-disable; + }; + pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 { + pinmux = ; + bias-disable; + }; + pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 { + pinmux = ; + bias-disable; + }; + }; + + pinctrl_adc { + pinctrl_adc2: adc2 { + pinmux = ; + bias-disable; + }; + pinctrl_adc3: adc3 { + pinmux = ; + bias-disable; + }; + pinctrl_adc4: adc4 { + pinmux = ; + bias-disable; + }; + pinctrl_adc5: adc5 { + pinmux = ; + bias-disable; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_0>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +/* debug uart */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_1>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_2>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_3>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart_4>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; +}; + +&flx0 { + atmel,flexcom-mode = ; + status = "disabled"; + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(11))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx3 { + atmel,flexcom-mode = ; + status = "disabled"; + + uart6: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x400>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(17))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(18))>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx3_default>; + atmel,fifo-size = <32>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; +}; + +&flx4 { + atmel,flexcom-mode = ; + status = "disabled"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(19))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(20))>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "disabled"; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&shutdown_controller { + atmel,shdwc-debouncer = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + atmel,wakeup-type = "low"; + }; +}; + +&watchdog { + status = "okay"; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc2 + &pinctrl_adc3 + &pinctrl_adc4 + &pinctrl_adc5>; + + vddana-supply = <&vdd_adc_vddana>; + vref-supply = <&vdd_adc_vref>; + status = "disabled"; +}; + +&securam { + export; + + /* export overkiz u-boot mode/version and factory */ + uboot@1400 { + reg = <0x1400 0x20>; + export; + }; +}; -- 2.23.0