Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Sat, 19 Oct 2019 16:11:03 +0200
From:   Guido =?iso-8859-1?Q?G=FCnther?= <agx@sigxcpu.org>
To:     Andrzej Hajda <a.hajda@samsung.com>
Cc:     David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Jernej Skrabec <jernej.skrabec@siol.net>,
        Lee Jones <lee.jones@linaro.org>,
        dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Robert Chiras <robert.chiras@nxp.com>,
        Sam Ravnborg <sam@ravnborg.org>, Arnd Bergmann <arnd@arndb.de>
Subject: Re: [PATCH v6 2/2] drm/bridge: Add NWL MIPI DSI host controller
 support
Message-ID: <20191019141103.GA21138@bogon.m.sigxcpu.org>
References: <cover.1569170717.git.agx@sigxcpu.org>
 <CGME20190922164727epcas4p3da05d770057f57cbf00d8dfd01ae06b6@epcas4p3.samsung.com>
 <c0ac0b203fb65ae7efd1b9b54664b491ca2fb157.1569170717.git.agx@sigxcpu.org>
 <c86b7ca2-7799-eafd-c380-e4b551520837@samsung.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <c86b7ca2-7799-eafd-c380-e4b551520837@samsung.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Andrzej,
thanks for your comments! See inline for follow ups.

On Mon, Sep 23, 2019 at 12:01:51PM +0200, Andrzej Hajda wrote:
> On 22.09.2019 18:47, Guido Günther wrote:
> > This adds initial support for the NWL MIPI DSI Host controller found on
> > i.MX8 SoCs.
> >
> > It adds support for the i.MX8MQ but the same IP can be found on
> > e.g. the i.MX8QXP.
> >
> > It has been tested on the Librem 5 devkit using mxsfb.
> >
> > Signed-off-by: Guido Günther <agx@sigxcpu.org>
> > Co-developed-by: Robert Chiras <robert.chiras@nxp.com>
> > Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
> > Tested-by: Robert Chiras <robert.chiras@nxp.com>
> > ---
> >  drivers/gpu/drm/bridge/Kconfig   |   16 +
> >  drivers/gpu/drm/bridge/Makefile  |    3 +
> >  drivers/gpu/drm/bridge/nwl-dsi.c | 1180 ++++++++++++++++++++++++++++++
> >  drivers/gpu/drm/bridge/nwl-dsi.h |  144 ++++
> >  4 files changed, 1343 insertions(+)
> >  create mode 100644 drivers/gpu/drm/bridge/nwl-dsi.c
> >  create mode 100644 drivers/gpu/drm/bridge/nwl-dsi.h
> >
> > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> > index 1cc9f502c1f2..13021f9a6107 100644
> > --- a/drivers/gpu/drm/bridge/Kconfig
> > +++ b/drivers/gpu/drm/bridge/Kconfig
> > @@ -65,6 +65,22 @@ config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
> >            to DP++. This is used with the i.MX6 imx-ldb
> >            driver. You are likely to say N here.
> >  
> > +config DRM_NWL_MIPI_DSI
> > +	tristate "Northwest Logic MIPI DSI Host controller"
> > +	depends on DRM
> > +	depends on COMMON_CLK
> > +	depends on OF && HAS_IOMEM
> > +	select DRM_KMS_HELPER
> > +	select DRM_MIPI_DSI
> > +	select DRM_PANEL_BRIDGE
> > +	select GENERIC_PHY_MIPI_DPHY
> > +	select MFD_SYSCON
> > +	select MULTIPLEXER
> > +	select REGMAP_MMIO
> > +	help
> > +	  This enables the Northwest Logic MIPI DSI Host controller as
> > +	  for example found on NXP's i.MX8 Processors.
> > +
> >  config DRM_NXP_PTN3460
> >  	tristate "NXP PTN3460 DP/LVDS bridge"
> >  	depends on OF
> > diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> > index 4934fcf5a6f8..c3f3a43e9b8f 100644
> > --- a/drivers/gpu/drm/bridge/Makefile
> > +++ b/drivers/gpu/drm/bridge/Makefile
> > @@ -16,4 +16,7 @@ obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
> >  obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> >  obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
> >  obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
> > +obj-$(CONFIG_DRM_NWL_MIPI_DSI) += nwl-dsi.o
> >  obj-y += synopsys/
> > +
> > +header-test-y += nwl-dsi.h
> > diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
> > new file mode 100644
> > index 000000000000..dea5429a1e17
> > --- /dev/null
> > +++ b/drivers/gpu/drm/bridge/nwl-dsi.c
> > @@ -0,0 +1,1180 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * i.MX8 NWL MIPI DSI host driver
> > + *
> > + * Copyright (C) 2017 NXP
> > + * Copyright (C) 2019 Purism SPC
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/clk.h>
> > +#include <linux/irq.h>
> > +#include <linux/math64.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/mux/consumer.h>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/regmap.h>
> > +#include <linux/reset.h>
> > +#include <linux/sys_soc.h>
> > +#include <linux/time64.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_bridge.h>
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_of.h>
> > +#include <drm/drm_panel.h>
> > +#include <drm/drm_print.h>
> > +#include <drm/drm_probe_helper.h>
> > +
> > +#include <video/mipi_display.h>
> > +#include <video/videomode.h>
> > +
> > +#include "nwl-dsi.h"
> > +
> > +#define DRV_NAME "nwl-dsi"
> > +
> > +/* i.MX8 NWL quirks */
> > +/* i.MX8MQ errata E11418 */
> > +#define E11418_HS_MODE_QUIRK	BIT(0)
> > +/* Skip DSI bits in SRC on disable to avoid blank display on enable */
> > +#define SRC_RESET_QUIRK		BIT(1)
> > +
> > +#define NWL_DSI_MIPI_FIFO_TIMEOUT msecs_to_jiffies(500)
> > +
> > +enum transfer_direction {
> > +	DSI_PACKET_SEND,
> > +	DSI_PACKET_RECEIVE,
> > +};
> > +
> > +/* Possible platform specific clocks */
> > +#define NWL_DSI_CLK_CORE	    "core"
> > +#define NWL_DSI_MAX_PLATFORM_CLOCKS 1
> > +
> > +struct nwl_dsi_plat_clk_config {
> > +	const char *id;
> > +	struct clk *clk;
> > +	bool present;
> > +};
> > +
> > +struct nwl_dsi_transfer {
> > +	const struct mipi_dsi_msg *msg;
> > +	struct mipi_dsi_packet packet;
> > +	struct completion completed;
> > +
> > +	int status; /* status of transmission */
> > +	enum transfer_direction direction;
> > +	bool need_bta;
> > +	u8 cmd;
> > +	u16 rx_word_count;
> > +	size_t tx_len; /* in bytes */
> > +	size_t rx_len; /* in bytes */
> > +};
> > +
> > +struct nwl_dsi {
> > +	struct drm_bridge bridge;
> > +	struct mipi_dsi_host dsi_host;
> > +	struct drm_bridge *panel_bridge;
> > +	struct device *dev;
> > +	struct phy *phy;
> > +	union phy_configure_opts phy_cfg;
> > +	unsigned int quirks;
> > +
> > +	struct regmap *regmap;
> > +	int irq;
> > +	struct reset_control *rstc;
> > +	struct mux_control *mux;
> > +
> > +	/* DSI clocks */
> > +	struct clk *phy_ref_clk;
> > +	struct clk *rx_esc_clk;
> > +	struct clk *tx_esc_clk;
> > +	/* Platform dependent clocks */
> > +	struct nwl_dsi_plat_clk_config clk_config[NWL_DSI_MAX_PLATFORM_CLOCKS];
> 
> 
> These clocks are not documented.

we have

      - description: DSI core clock
      - description: RX_ESC clock (used in escape mode)
      - description: TX_ESC clock (used in escape mode)
      - description: PHY_REF clock

in th yaml. The core clock is the only platform specific one, imx8qm
will add more.

> 
> 
> > +
> > +	/* dsi lanes */
> > +	u32 lanes;
> > +	enum mipi_dsi_pixel_format format;
> > +	struct drm_display_mode mode;
> > +	unsigned long dsi_mode_flags;
> > +
> > +	struct nwl_dsi_transfer *xfer;
> > +
> > +	const struct nwl_dsi_platform_data *pdata;
> > +};
> > +
> > +/* Platform specific hooks to enable other SoCs like the i.MX8QM */
> > +struct nwl_dsi_platform_data {
> > +	int (*poweron)(struct nwl_dsi *dsi);
> > +	int (*poweroff)(struct nwl_dsi *dsi);
> > +	int (*select_input)(struct nwl_dsi *dsi);
> > +	int (*deselect_input)(struct nwl_dsi *dsi);
> > +	struct nwl_dsi_plat_clk_config clk_config[NWL_DSI_MAX_PLATFORM_CLOCKS];
> > +};
> > +
> > +static const struct regmap_config nwl_dsi_regmap_config = {
> > +	.reg_bits = 16,
> > +	.val_bits = 32,
> > +	.reg_stride = 4,
> > +	.max_register = NWL_DSI_IRQ_MASK2,
> > +	.name = DRV_NAME,
> > +};
> > +
> > +static inline struct nwl_dsi *bridge_to_dsi(struct drm_bridge *bridge)
> > +{
> > +	return container_of(bridge, struct nwl_dsi, bridge);
> > +}
> > +
> > +
> 
> 
> spare empty line

dropped.
> 
> 
> > +static int nwl_dsi_write(struct nwl_dsi *dsi, unsigned int reg, u32 val)
> > +{
> > +	int ret;
> > +
> > +	ret = regmap_write(dsi->regmap, reg, val);
> > +	if (ret < 0)
> > +		DRM_DEV_ERROR(dsi->dev,
> > +			      "Failed to write NWL DSI reg 0x%x: %d\n", reg,
> > +			      ret);
> > +	return ret;
> > +}
> > +
> > +static u32 nwl_dsi_read(struct nwl_dsi *dsi, u32 reg)
> > +{
> > +	unsigned int val;
> > +	int ret;
> > +
> > +	ret = regmap_read(dsi->regmap, reg, &val);
> > +	if (ret < 0)
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to read NWL DSI reg 0x%x: %d\n",
> > +			      reg, ret);
> > +
> > +	return val;
> 
> 
> Error is logged, but not propagated, as a result caller will assume the
> read was successful, quite fishy.

Agreed, we can use the same pattern as for write errors.

> 
> 
> > +}
> > +
> > +static u32 nwl_dsi_get_dpi_pixel_format(enum mipi_dsi_pixel_format format)
> > +{
> > +	switch (format) {
> > +	case MIPI_DSI_FMT_RGB565:
> > +		return NWL_DSI_PIXEL_FORMAT_16;
> > +	case MIPI_DSI_FMT_RGB666:
> > +		return NWL_DSI_PIXEL_FORMAT_18L;
> > +	case MIPI_DSI_FMT_RGB666_PACKED:
> > +		return NWL_DSI_PIXEL_FORMAT_18;
> > +	case MIPI_DSI_FMT_RGB888:
> > +		return NWL_DSI_PIXEL_FORMAT_24;
> > +	default:
> > +		return -EINVAL;
> 
> 
> return type should be signed

Fixed.

> 
> 
> > +	}
> > +}
> > +
> > +/*
> > + * ps2bc - Picoseconds to byte clock cycles
> > + */
> > +static u32 ps2bc(struct nwl_dsi *dsi, unsigned long long ps)
> > +{
> > +	u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> > +
> > +	return DIV64_U64_ROUND_UP(ps * dsi->mode.clock * bpp,
> > +				  dsi->lanes * 8 * NSEC_PER_SEC);
> > +}
> > +
> > +/*
> > + * ui2bc - UI time periods to byte clock cycles
> > + */
> > +static u32 ui2bc(struct nwl_dsi *dsi, unsigned long long ui)
> > +{
> > +	u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> > +
> > +	return DIV64_U64_ROUND_UP(ui * dsi->lanes,
> > +				  dsi->mode.clock * 1000 * bpp);
> > +}
> > +
> > +/*
> > + * us2bc - micro seconds to lp clock cycles
> > + */
> > +static u32 us2lp(u32 lp_clk_rate, unsigned long us)
> > +{
> > +	return DIV_ROUND_UP(us * lp_clk_rate, USEC_PER_SEC);
> > +}
> > +
> > +static int nwl_dsi_config_host(struct nwl_dsi *dsi)
> > +{
> > +	u32 cycles;
> > +	struct phy_configure_opts_mipi_dphy *cfg = &dsi->phy_cfg.mipi_dphy;
> > +
> > +	if (dsi->lanes < 1 || dsi->lanes > 4)
> > +		return -EINVAL;
> > +
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "DSI Lanes %d\n", dsi->lanes);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_NUM_LANES, dsi->lanes - 1);
> > +
> > +	if (dsi->dsi_mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
> > +		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x01);
> > +		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x01);
> > +	} else {
> > +		nwl_dsi_write(dsi, NWL_DSI_CFG_NONCONTINUOUS_CLK, 0x00);
> > +		nwl_dsi_write(dsi, NWL_DSI_CFG_AUTOINSERT_EOTP, 0x00);
> > +	}
> > +
> > +	/* values in byte clock cycles */
> > +	cycles = ui2bc(dsi, cfg->clk_pre);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_pre: 0x%x\n", cycles);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_T_PRE, cycles);
> > +	cycles = ps2bc(dsi, cfg->lpx + cfg->clk_prepare + cfg->clk_zero);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap (pre): 0x%x\n", cycles);
> > +	cycles += ui2bc(dsi, cfg->clk_pre);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_t_post: 0x%x\n", cycles);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_T_POST, cycles);
> > +	cycles = ps2bc(dsi, cfg->hs_exit);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_tx_gap: 0x%x\n", cycles);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_TX_GAP, cycles);
> > +
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP, 0x01);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_HTX_TO_COUNT, 0x00);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_LRX_H_TO_COUNT, 0x00);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_BTA_H_TO_COUNT, 0x00);
> > +	/* In LP clock cycles */
> > +	cycles = us2lp(cfg->lp_clk_rate, cfg->wakeup);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "cfg_twakeup: 0x%x\n", cycles);
> > +	nwl_dsi_write(dsi, NWL_DSI_CFG_TWAKEUP, cycles);
> > +
> > +	return 0;
> > +}
> > +
> > +static int nwl_dsi_config_dpi(struct nwl_dsi *dsi)
> > +{
> > +	u32 color_format, mode;
> > +	bool burst_mode;
> > +	int hfront_porch, hback_porch, vfront_porch, vback_porch;
> > +	int hsync_len, vsync_len;
> > +
> > +	hfront_porch = dsi->mode.hsync_start - dsi->mode.hdisplay;
> > +	hsync_len = dsi->mode.hsync_end - dsi->mode.hsync_start;
> > +	hback_porch = dsi->mode.htotal - dsi->mode.hsync_end;
> > +
> > +	vfront_porch = dsi->mode.vsync_start - dsi->mode.vdisplay;
> > +	vsync_len = dsi->mode.vsync_end - dsi->mode.vsync_start;
> > +	vback_porch = dsi->mode.vtotal - dsi->mode.vsync_end;
> > +
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hfront_porch = %d\n", hfront_porch);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hback_porch = %d\n", hback_porch);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hsync_len = %d\n", hsync_len);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "hdisplay = %d\n", dsi->mode.hdisplay);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vfront_porch = %d\n", vfront_porch);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vback_porch = %d\n", vback_porch);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vsync_len = %d\n", vsync_len);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "vactive = %d\n", dsi->mode.vdisplay);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "clock = %d kHz\n", dsi->mode.clock);
> > +
> > +	color_format = nwl_dsi_get_dpi_pixel_format(dsi->format);
> > +	if (color_format < 0) {
> 
> 
> As robot mentioned  it is always false.

Fixed.

> 
> 
> > +		DRM_DEV_ERROR(dsi->dev, "Invalid color format 0x%x\n",
> > +			      dsi->format);
> > +		return color_format;
> > +	}
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "pixel fmt = %d\n", dsi->format);
> > +
> > +	nwl_dsi_write(dsi, NWL_DSI_INTERFACE_COLOR_CODING, NWL_DSI_DPI_24_BIT);
> > +	nwl_dsi_write(dsi, NWL_DSI_PIXEL_FORMAT, color_format);
> > +	/*
> > +	 * Adjusting input polarity based on the video mode results in
> > +	 * a black screen so always pick active low:
> > +	 */
> > +	nwl_dsi_write(dsi, NWL_DSI_VSYNC_POLARITY,
> > +		      NWL_DSI_VSYNC_POLARITY_ACTIVE_LOW);
> > +	nwl_dsi_write(dsi, NWL_DSI_HSYNC_POLARITY,
> > +		      NWL_DSI_HSYNC_POLARITY_ACTIVE_LOW);
> > +
> > +	burst_mode = (dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_BURST) &&
> > +		     !(dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE);
> > +
> > +	if (burst_mode) {
> > +		nwl_dsi_write(dsi, NWL_DSI_VIDEO_MODE, NWL_DSI_VM_BURST_MODE);
> > +		nwl_dsi_write(dsi, NWL_DSI_PIXEL_FIFO_SEND_LEVEL, 256);
> > +	} else {
> > +		mode = ((dsi->dsi_mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) ?
> > +				NWL_DSI_VM_BURST_MODE_WITH_SYNC_PULSES :
> > +				NWL_DSI_VM_NON_BURST_MODE_WITH_SYNC_EVENTS);
> > +		nwl_dsi_write(dsi, NWL_DSI_VIDEO_MODE, mode);
> > +		nwl_dsi_write(dsi, NWL_DSI_PIXEL_FIFO_SEND_LEVEL,
> > +			      dsi->mode.hdisplay);
> > +	}
> > +
> > +	nwl_dsi_write(dsi, NWL_DSI_HFP, hfront_porch);
> > +	nwl_dsi_write(dsi, NWL_DSI_HBP, hback_porch);
> > +	nwl_dsi_write(dsi, NWL_DSI_HSA, hsync_len);
> > +
> > +	nwl_dsi_write(dsi, NWL_DSI_ENABLE_MULT_PKTS, 0x0);
> > +	nwl_dsi_write(dsi, NWL_DSI_BLLP_MODE, 0x1);
> > +	nwl_dsi_write(dsi, NWL_DSI_USE_NULL_PKT_BLLP, 0x0);
> > +	nwl_dsi_write(dsi, NWL_DSI_VC, 0x0);
> > +
> > +	nwl_dsi_write(dsi, NWL_DSI_PIXEL_PAYLOAD_SIZE, dsi->mode.hdisplay);
> > +	nwl_dsi_write(dsi, NWL_DSI_VACTIVE, dsi->mode.vdisplay - 1);
> > +	nwl_dsi_write(dsi, NWL_DSI_VBP, vback_porch);
> > +	nwl_dsi_write(dsi, NWL_DSI_VFP, vfront_porch);
> 
> 
> No checks for results of nwl_dsi_write. You should either add check
> after every call, or try "error state" pattern (see for example for
> tc358764.c driver).

'error state' pattern looks like a good fit, thanks!

> 
> 
> > +
> > +	return 0;
> > +}
> > +
> > +static void nwl_dsi_init_interrupts(struct nwl_dsi *dsi)
> > +{
> > +	u32 irq_enable;
> > +
> > +	nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK, 0xffffffff);
> > +	nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK2, 0x7);
> > +
> > +	irq_enable = ~(u32)(NWL_DSI_TX_PKT_DONE_MASK |
> > +			    NWL_DSI_RX_PKT_HDR_RCVD_MASK |
> > +			    NWL_DSI_TX_FIFO_OVFLW_MASK |
> > +			    NWL_DSI_HS_TX_TIMEOUT_MASK);
> 
> 
> I wonder if lack of '(u32)' would lead to some bugs/warnings.

drivers/gpu/drm/bridge/nwl-dsi.c: In function ‘nwl_dsi_init_interrupts’:
drivers/gpu/drm/bridge/nwl-dsi.c:345:15: warning: conversion from ‘long unsigned int’ to ‘u32’ {aka ‘unsigned int’} changes value from ‘18446744071562067829’ to ‘2147483509’ [-Woverflow]
  irq_enable = ~(NWL_DSI_TX_PKT_DONE_MASK |
               
> > +
> > +	nwl_dsi_write(dsi, NWL_DSI_IRQ_MASK, irq_enable);
> > +}
> > +
> > +static int nwl_dsi_host_attach(struct mipi_dsi_host *dsi_host,
> > +			       struct mipi_dsi_device *device)
> > +{
> > +	struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
> > +	struct device *dev = dsi->dev;
> > +	struct drm_bridge *bridge;
> > +	struct drm_panel *panel;
> > +	int ret;
> > +
> > +	DRM_DEV_INFO(dev, "lanes=%u, format=0x%x flags=0x%lx\n", device->lanes,
> > +		     device->format, device->mode_flags);
> > +
> > +	if (device->lanes < 1 || device->lanes > 4)
> > +		return -EINVAL;
> 
> 
> I guess this sanity check should be rather in mipi_dsi_attach, but since
> it is not there let's leave it here.
> 
> 
> > +
> > +	dsi->lanes = device->lanes;
> > +	dsi->format = device->format;
> > +	dsi->dsi_mode_flags = device->mode_flags;
> > +
> > +	ret = drm_of_find_panel_or_bridge(dsi->dev->of_node, 1, 0, &panel,
> > +					  &bridge);
> > +	if (ret)
> > +		return ret;
> > +
> > +	if (panel) {
> > +		bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_DSI);
> > +		if (IS_ERR(bridge))
> > +			return PTR_ERR(bridge);
> > +	}
> > +
> > +	dsi->panel_bridge = bridge;
> > +	drm_bridge_add(&dsi->bridge);
> > +
> > +	return 0;
> > +}
> > +
> > +static int nwl_dsi_host_detach(struct mipi_dsi_host *dsi_host,
> > +			       struct mipi_dsi_device *device)
> > +{
> > +	struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
> > +
> > +	drm_of_panel_bridge_remove(dsi->dev->of_node, 1, 0);
> > +	drm_bridge_remove(&dsi->bridge);
> > +
> > +	return 0;
> > +}
> > +
> > +static bool nwl_dsi_read_packet(struct nwl_dsi *dsi, u32 status)
> > +{
> > +	struct device *dev = dsi->dev;
> > +	struct nwl_dsi_transfer *xfer = dsi->xfer;
> > +	u8 *payload = xfer->msg->rx_buf;
> > +	u32 val;
> > +	u16 word_count;
> > +	u8 channel;
> > +	u8 data_type;
> > +
> > +	xfer->status = 0;
> > +
> > +	if (xfer->rx_word_count == 0) {
> > +		if (!(status & NWL_DSI_RX_PKT_HDR_RCVD))
> > +			return false;
> > +		/* Get the RX header and parse it */
> > +		val = nwl_dsi_read(dsi, NWL_DSI_RX_PKT_HEADER);
> > +		word_count = NWL_DSI_WC(val);
> > +		channel = NWL_DSI_RX_VC(val);
> > +		data_type = NWL_DSI_RX_DT(val);
> > +
> > +		if (channel != xfer->msg->channel) {
> > +			DRM_DEV_ERROR(dev,
> > +				      "[%02X] Channel mismatch (%u != %u)\n",
> > +				      xfer->cmd, channel, xfer->msg->channel);
> > +			return true;
> > +		}
> > +
> > +		switch (data_type) {
> > +		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
> > +			/* Fall through */
> > +		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
> > +			if (xfer->msg->rx_len > 1) {
> > +				/* read second byte */
> > +				payload[1] = word_count >> 8;
> > +				++xfer->rx_len;
> > +			}
> > +			/* Fall through */
> > +		case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
> > +			/* Fall through */
> > +		case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
> > +			if (xfer->msg->rx_len > 0) {
> > +				/* read first byte */
> > +				payload[0] = word_count & 0xff;
> > +				++xfer->rx_len;
> > +			}
> > +			xfer->status = xfer->rx_len;
> > +			return true;
> > +		case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
> > +			word_count &= 0xff;
> > +			DRM_DEV_ERROR(dev, "[%02X] DSI error report: 0x%02x\n",
> > +				      xfer->cmd, word_count);
> > +			xfer->status = -EPROTO;
> > +			return true;
> > +		}
> > +
> > +		if (word_count > xfer->msg->rx_len) {
> > +			DRM_DEV_ERROR(
> > +				dev,
> > +				"[%02X] Receive buffer too small: %zu (< %u)\n",
> > +				xfer->cmd, xfer->msg->rx_len, word_count);
> > +			return true;
> > +		}
> > +
> > +		xfer->rx_word_count = word_count;
> > +	} else {
> > +		/* Set word_count from previous header read */
> > +		word_count = xfer->rx_word_count;
> > +	}
> > +
> > +	/* If RX payload is not yet received, wait for it */
> > +	if (!(status & NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD))
> > +		return false;
> > +
> > +	/* Read the RX payload */
> > +	while (word_count >= 4) {
> > +		val = nwl_dsi_read(dsi, NWL_DSI_RX_PAYLOAD);
> > +		payload[0] = (val >> 0) & 0xff;
> > +		payload[1] = (val >> 8) & 0xff;
> > +		payload[2] = (val >> 16) & 0xff;
> > +		payload[3] = (val >> 24) & 0xff;
> > +		payload += 4;
> > +		xfer->rx_len += 4;
> > +		word_count -= 4;
> > +	}
> > +
> > +	if (word_count > 0) {
> > +		val = nwl_dsi_read(dsi, NWL_DSI_RX_PAYLOAD);
> > +		switch (word_count) {
> > +		case 3:
> > +			payload[2] = (val >> 16) & 0xff;
> > +			++xfer->rx_len;
> > +			/* Fall through */
> > +		case 2:
> > +			payload[1] = (val >> 8) & 0xff;
> > +			++xfer->rx_len;
> > +			/* Fall through */
> > +		case 1:
> > +			payload[0] = (val >> 0) & 0xff;
> > +			++xfer->rx_len;
> > +			break;
> > +		}
> > +	}
> > +
> > +	xfer->status = xfer->rx_len;
> > +
> > +	return true;
> > +}
> > +
> > +static void nwl_dsi_finish_transmission(struct nwl_dsi *dsi, u32 status)
> > +{
> > +	struct nwl_dsi_transfer *xfer = dsi->xfer;
> > +	bool end_packet = false;
> > +
> > +	if (!xfer)
> > +		return;
> > +
> > +	if (xfer->direction == DSI_PACKET_SEND &&
> > +	    status & NWL_DSI_TX_PKT_DONE) {
> > +		xfer->status = xfer->tx_len;
> > +		end_packet = true;
> > +	} else if (status & NWL_DSI_DPHY_DIRECTION &&
> > +		   ((status & (NWL_DSI_RX_PKT_HDR_RCVD |
> > +			       NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD)))) {
> > +		end_packet = nwl_dsi_read_packet(dsi, status);
> > +	}
> > +
> > +	if (end_packet)
> > +		complete(&xfer->completed);
> > +}
> > +
> > +static void nwl_dsi_begin_transmission(struct nwl_dsi *dsi)
> > +{
> > +	struct nwl_dsi_transfer *xfer = dsi->xfer;
> > +	struct mipi_dsi_packet *pkt = &xfer->packet;
> > +	const u8 *payload;
> > +	size_t length;
> > +	u16 word_count;
> > +	u8 hs_mode;
> > +	u32 val;
> > +	u32 hs_workaround = 0;
> > +
> > +	/* Send the payload, if any */
> > +	length = pkt->payload_length;
> > +	payload = pkt->payload;
> > +
> > +	while (length >= 4) {
> > +		val = *(u32 *)payload;
> > +		hs_workaround |= !(val & 0xFFFF00);
> > +		nwl_dsi_write(dsi, NWL_DSI_TX_PAYLOAD, val);
> > +		payload += 4;
> > +		length -= 4;
> > +	}
> > +	/* Send the rest of the payload */
> > +	val = 0;
> > +	switch (length) {
> > +	case 3:
> > +		val |= payload[2] << 16;
> > +		/* Fall through */
> > +	case 2:
> > +		val |= payload[1] << 8;
> > +		hs_workaround |= !(val & 0xFFFF00);
> > +		/* Fall through */
> > +	case 1:
> > +		val |= payload[0];
> > +		nwl_dsi_write(dsi, NWL_DSI_TX_PAYLOAD, val);
> > +		break;
> > +	}
> > +	xfer->tx_len = pkt->payload_length;
> > +
> > +	/*
> > +	 * Send the header
> > +	 * header[0] = Virtual Channel + Data Type
> > +	 * header[1] = Word Count LSB (LP) or first param (SP)
> > +	 * header[2] = Word Count MSB (LP) or second param (SP)
> > +	 */
> > +	word_count = pkt->header[1] | (pkt->header[2] << 8);
> > +	if (hs_workaround && (dsi->quirks & E11418_HS_MODE_QUIRK)) {
> > +		DRM_DEV_DEBUG_DRIVER(dsi->dev,
> > +				     "Using hs mode workaround for cmd 0x%x\n",
> > +				     xfer->cmd);
> > +		hs_mode = 1;
> > +	} else {
> > +		hs_mode = (xfer->msg->flags & MIPI_DSI_MSG_USE_LPM) ? 0 : 1;
> > +	}
> > +	val = NWL_DSI_WC(word_count) | NWL_DSI_TX_VC(xfer->msg->channel) |
> > +	      NWL_DSI_TX_DT(xfer->msg->type) | NWL_DSI_HS_SEL(hs_mode) |
> > +	      NWL_DSI_BTA_TX(xfer->need_bta);
> > +	nwl_dsi_write(dsi, NWL_DSI_PKT_CONTROL, val);
> > +
> > +	/* Send packet command */
> > +	nwl_dsi_write(dsi, NWL_DSI_SEND_PACKET, 0x1);
> > +}
> > +
> > +static ssize_t nwl_dsi_host_transfer(struct mipi_dsi_host *dsi_host,
> > +				     const struct mipi_dsi_msg *msg)
> > +{
> > +	struct nwl_dsi *dsi = container_of(dsi_host, struct nwl_dsi, dsi_host);
> > +	struct nwl_dsi_transfer xfer;
> > +	ssize_t ret = 0;
> > +
> > +	/* Create packet to be sent */
> > +	dsi->xfer = &xfer;
> > +	ret = mipi_dsi_create_packet(&xfer.packet, msg);
> > +	if (ret < 0) {
> > +		dsi->xfer = NULL;
> > +		return ret;
> > +	}
> > +
> > +	if ((msg->type & MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM ||
> > +	     msg->type & MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM ||
> > +	     msg->type & MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM ||
> > +	     msg->type & MIPI_DSI_DCS_READ) &&
> > +	    msg->rx_len > 0 && msg->rx_buf != NULL)
> > +		xfer.direction = DSI_PACKET_RECEIVE;
> > +	else
> > +		xfer.direction = DSI_PACKET_SEND;
> > +
> > +	xfer.need_bta = (xfer.direction == DSI_PACKET_RECEIVE);
> > +	xfer.need_bta |= (msg->flags & MIPI_DSI_MSG_REQ_ACK) ? 1 : 0;
> > +	xfer.msg = msg;
> > +	xfer.status = -ETIMEDOUT;
> > +	xfer.rx_word_count = 0;
> > +	xfer.rx_len = 0;
> > +	xfer.cmd = 0x00;
> > +	if (msg->tx_len > 0)
> > +		xfer.cmd = ((u8 *)(msg->tx_buf))[0];
> > +	init_completion(&xfer.completed);
> > +
> > +	ret = clk_prepare_enable(dsi->rx_esc_clk);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to enable rx_esc clk: %zd\n",
> > +			      ret);
> > +		return ret;
> > +	}
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "Enabled rx_esc clk @%lu Hz\n",
> > +			     clk_get_rate(dsi->rx_esc_clk));
> > +
> > +	/* Initiate the DSI packet transmision */
> > +	nwl_dsi_begin_transmission(dsi);
> > +
> > +	if (!wait_for_completion_timeout(&xfer.completed,
> > +					 NWL_DSI_MIPI_FIFO_TIMEOUT)) {
> > +		DRM_DEV_ERROR(dsi_host->dev, "[%02X] DSI transfer timed out\n",
> > +			      xfer.cmd);
> > +		ret = -ETIMEDOUT;
> > +	} else {
> > +		ret = xfer.status;
> > +	}
> > +
> > +	clk_disable_unprepare(dsi->rx_esc_clk);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct mipi_dsi_host_ops nwl_dsi_host_ops = {
> > +	.attach = nwl_dsi_host_attach,
> > +	.detach = nwl_dsi_host_detach,
> > +	.transfer = nwl_dsi_host_transfer,
> > +};
> > +
> > +static irqreturn_t nwl_dsi_irq_handler(int irq, void *data)
> > +{
> > +	u32 irq_status;
> > +	struct nwl_dsi *dsi = data;
> > +
> > +	irq_status = nwl_dsi_read(dsi, NWL_DSI_IRQ_STATUS);
> > +
> > +	if (irq_status & NWL_DSI_TX_FIFO_OVFLW)
> > +		DRM_DEV_ERROR_RATELIMITED(dsi->dev, "tx fifo overflow\n");
> > +
> > +	if (irq_status & NWL_DSI_HS_TX_TIMEOUT)
> > +		DRM_DEV_ERROR_RATELIMITED(dsi->dev, "HS tx timeout\n");
> > +
> > +	if (irq_status & NWL_DSI_TX_PKT_DONE ||
> > +	    irq_status & NWL_DSI_RX_PKT_HDR_RCVD ||
> > +	    irq_status & NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD)
> > +		nwl_dsi_finish_transmission(dsi, irq_status);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int nwl_dsi_enable(struct nwl_dsi *dsi)
> > +{
> > +	struct device *dev = dsi->dev;
> > +	union phy_configure_opts *phy_cfg = &dsi->phy_cfg;
> > +	int ret;
> > +
> > +	if (!dsi->lanes) {
> > +		DRM_DEV_ERROR(dev, "Need DSI lanes: %d\n", dsi->lanes);
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = phy_init(dsi->phy);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dev, "Failed to init DSI phy: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = phy_configure(dsi->phy, phy_cfg);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = clk_prepare_enable(dsi->tx_esc_clk);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to enable tx_esc clk: %d\n",
> > +			      ret);
> > +		return ret;
> > +	}
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "Enabled tx_esc clk @%lu Hz\n",
> > +			     clk_get_rate(dsi->tx_esc_clk));
> > +
> > +	ret = nwl_dsi_config_host(dsi);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dev, "Failed to set up DSI: %d", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = nwl_dsi_config_dpi(dsi);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dev, "Failed to set up DPI: %d", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = phy_power_on(dsi->phy);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dev, "Failed to power on DPHY (%d)\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	nwl_dsi_init_interrupts(dsi);
> > +
> > +	return 0;
> 
> 
> no unwinding in case of error

no idea how i missed that, thanks.


> > +}
> > +
> > +static int nwl_dsi_disable(struct nwl_dsi *dsi)
> > +{
> > +	struct device *dev = dsi->dev;
> > +
> > +	DRM_DEV_DEBUG_DRIVER(dev, "Disabling clocks and phy\n");
> > +
> > +	phy_power_off(dsi->phy);
> > +	phy_exit(dsi->phy);
> > +
> > +	/* Disabling the clock before the phy breaks enabling dsi again */
> > +	clk_disable_unprepare(dsi->tx_esc_clk);
> > +
> > +	return 0;
> > +}
> > +
> > +static int nwl_dsi_set_platform_clocks(struct nwl_dsi *dsi, bool enable)
> > +{
> > +	struct device *dev = dsi->dev;
> > +	const char *id;
> > +	struct clk *clk;
> > +	size_t i;
> > +	unsigned long rate;
> > +	int ret, result = 0;
> > +
> > +	DRM_DEV_DEBUG_DRIVER(dev, "%s platform clocks\n",
> > +			     enable ? "enabling" : "disabling");
> > +	for (i = 0; i < ARRAY_SIZE(dsi->pdata->clk_config); i++) {
> > +		if (!dsi->clk_config[i].present)
> > +			continue;
> > +		id = dsi->clk_config[i].id;
> > +		clk = dsi->clk_config[i].clk;
> > +
> > +		if (enable) {
> > +			ret = clk_prepare_enable(clk);
> > +			if (ret < 0) {
> > +				DRM_DEV_ERROR(dev,
> > +					      "Failed to enable %s clk: %d\n",
> > +					      id, ret);
> > +				result = result ?: ret;
> > +			}
> > +			rate = clk_get_rate(clk);
> > +			DRM_DEV_DEBUG_DRIVER(dev, "Enabled %s clk @%lu Hz\n",
> > +					     id, rate);
> > +		} else {
> > +			clk_disable_unprepare(clk);
> > +			DRM_DEV_DEBUG_DRIVER(dev, "Disabled %s clk\n", id);
> > +		}
> > +	}
> > +
> > +	return result;
> > +}
> > +
> > +static int nwl_dsi_plat_enable(struct nwl_dsi *dsi)
> > +{
> > +	struct device *dev = dsi->dev;
> > +	int ret;
> > +
> > +	if (dsi->pdata->select_input)
> > +		dsi->pdata->select_input(dsi);
> > +
> > +	ret = nwl_dsi_set_platform_clocks(dsi, true);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = dsi->pdata->poweron(dsi);
> > +	if (ret < 0)
> > +		DRM_DEV_ERROR(dev, "Failed to power on DSI: %d\n", ret);
> > +	return ret;
> > +}
> > +
> > +static void nwl_dsi_plat_disable(struct nwl_dsi *dsi)
> > +{
> > +	dsi->pdata->poweroff(dsi);
> > +	nwl_dsi_set_platform_clocks(dsi, false);
> > +	if (dsi->pdata->deselect_input)
> > +		dsi->pdata->deselect_input(dsi);
> > +}
> > +
> > +static void nwl_dsi_bridge_disable(struct drm_bridge *bridge)
> > +{
> > +	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
> > +
> > +	nwl_dsi_disable(dsi);
> > +	nwl_dsi_plat_disable(dsi);
> > +	pm_runtime_put(dsi->dev);
> > +}
> > +
> > +static int nwl_dsi_get_dphy_params(struct nwl_dsi *dsi,
> > +				   const struct drm_display_mode *mode,
> > +				   union phy_configure_opts *phy_opts)
> > +{
> > +	unsigned long rate;
> > +	int ret;
> > +
> > +	if (dsi->lanes < 1 || dsi->lanes > 4)
> > +		return -EINVAL;
> > +
> > +	/*
> > +	 * So far the DPHY spec minimal timings work for both mixel
> > +	 * dphy and nwl dsi host
> > +	 */
> > +	ret = phy_mipi_dphy_get_default_config(
> > +		mode->crtc_clock * 1000,
> > +		mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes,
> > +		&phy_opts->mipi_dphy);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	rate = clk_get_rate(dsi->tx_esc_clk);
> > +	DRM_DEV_DEBUG_DRIVER(dsi->dev, "LP clk is @%lu Hz\n", rate);
> > +	phy_opts->mipi_dphy.lp_clk_rate = rate;
> > +
> > +	return 0;
> > +}
> > +
> > +static bool nwl_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
> > +				      const struct drm_display_mode *mode,
> > +				      struct drm_display_mode *adjusted_mode)
> > +{
> > +	/* At least LCDIF + NWL needs active high sync */
> > +	adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
> > +	adjusted_mode->flags &= ~(DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
> > +
> > +	return true;
> > +}
> > +
> > +static enum drm_mode_status
> > +nwl_dsi_bridge_mode_valid(struct drm_bridge *bridge,
> > +			  const struct drm_display_mode *mode)
> > +{
> > +	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
> > +	int bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> > +
> > +	if (mode->clock * bpp > 15000000 * dsi->lanes)
> > +		return MODE_CLOCK_HIGH;
> > +
> > +	if (mode->clock * bpp < 80000 * dsi->lanes)
> > +		return MODE_CLOCK_LOW;
> > +
> > +	return MODE_OK;
> > +}
> > +
> > +static void
> > +nwl_dsi_bridge_mode_set(struct drm_bridge *bridge,
> > +			const struct drm_display_mode *mode,
> > +			const struct drm_display_mode *adjusted_mode)
> > +{
> > +	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
> > +	struct device *dev = dsi->dev;
> > +	union phy_configure_opts new_cfg;
> > +	unsigned long phy_ref_rate;
> > +	int ret;
> > +
> > +	ret = nwl_dsi_get_dphy_params(dsi, adjusted_mode, &new_cfg);
> > +	if (ret < 0)
> > +		return;
> > +
> > +	/*
> > +	 * If hs clock is unchanged, we're all good - all parameters are
> > +	 * derived from it atm.
> > +	 */
> > +	if (new_cfg.mipi_dphy.hs_clk_rate == dsi->phy_cfg.mipi_dphy.hs_clk_rate)
> > +		return;
> > +
> > +	phy_ref_rate = clk_get_rate(dsi->phy_ref_clk);
> > +	DRM_DEV_DEBUG_DRIVER(dev, "PHY at ref rate: %lu\n", phy_ref_rate);
> > +	/* Save the new desired phy config */
> > +	memcpy(&dsi->phy_cfg, &new_cfg, sizeof(new_cfg));
> > +
> > +	memcpy(&dsi->mode, adjusted_mode, sizeof(dsi->mode));
> > +	drm_mode_debug_printmodeline(adjusted_mode);
> > +}
> > +
> > +static void nwl_dsi_bridge_pre_enable(struct drm_bridge *bridge)
> > +{
> > +	struct nwl_dsi *dsi = bridge_to_dsi(bridge);
> > +
> > +	pm_runtime_get_sync(dsi->dev);
> > +	nwl_dsi_plat_enable(dsi);
> > +	nwl_dsi_enable(dsi);
> > +}
> > +
> > +static int nwl_dsi_bridge_attach(struct drm_bridge *bridge)
> > +{
> > +	struct nwl_dsi *dsi = bridge->driver_private;
> 
> 
> Please use container_of here, driver_private shouldn't be used in
> embeded bridges.

Done.

> 
> 
> > +
> > +	return drm_bridge_attach(bridge->encoder, dsi->panel_bridge, bridge);
> > +}
> > +
> > +static const struct drm_bridge_funcs nwl_dsi_bridge_funcs = {
> > +	.pre_enable = nwl_dsi_bridge_pre_enable,
> > +	.disable    = nwl_dsi_bridge_disable,
> > +	.mode_fixup = nwl_dsi_bridge_mode_fixup,
> > +	.mode_set   = nwl_dsi_bridge_mode_set,
> > +	.mode_valid = nwl_dsi_bridge_mode_valid,
> > +	.attach	    = nwl_dsi_bridge_attach,
> > +};
> > +
> > +static int nwl_dsi_parse_dt(struct nwl_dsi *dsi)
> > +{
> > +	struct platform_device *pdev = to_platform_device(dsi->dev);
> > +	struct clk *clk;
> > +	const char *clk_id;
> > +	void __iomem *base;
> > +	int i, ret;
> > +
> > +	dsi->phy = devm_phy_get(dsi->dev, "dphy");
> > +	if (IS_ERR(dsi->phy)) {
> > +		ret = PTR_ERR(dsi->phy);
> > +		if (ret != -EPROBE_DEFER)
> > +			DRM_DEV_ERROR(dsi->dev, "Could not get PHY: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	/* Platform dependent clocks */
> > +	memcpy(dsi->clk_config, dsi->pdata->clk_config,
> > +	       sizeof(dsi->pdata->clk_config));
> > +
> > +	for (i = 0; i < ARRAY_SIZE(dsi->pdata->clk_config); i++) {
> > +		if (!dsi->clk_config[i].present)
> > +			continue;
> > +
> > +		clk_id = dsi->clk_config[i].id;
> > +		clk = devm_clk_get(dsi->dev, clk_id);
> > +		if (IS_ERR(clk)) {
> > +			ret = PTR_ERR(clk);
> > +			DRM_DEV_ERROR(dsi->dev, "Failed to get %s clock: %d\n",
> > +				      clk_id, ret);
> > +			return ret;
> > +		}
> > +		DRM_DEV_DEBUG_DRIVER(dsi->dev, "Setup clk %s (rate: %lu)\n",
> > +				     clk_id, clk_get_rate(clk));
> > +		dsi->clk_config[i].clk = clk;
> > +	}
> 
> 
> As I said earlier this is undocumented.
> 
> 
> > +
> > +	/* DSI clocks */
> > +	clk = devm_clk_get(dsi->dev, "phy_ref");
> > +	if (IS_ERR(clk)) {
> > +		ret = PTR_ERR(clk);
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to get phy_ref clock: %d\n",
> > +			      ret);
> > +		return ret;
> > +	}
> > +	dsi->phy_ref_clk = clk;
> > +
> > +	clk = devm_clk_get(dsi->dev, "rx_esc");
> > +	if (IS_ERR(clk)) {
> > +		ret = PTR_ERR(clk);
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to get rx_esc clock: %d\n",
> > +			      ret);
> > +		return ret;
> > +	}
> > +	dsi->rx_esc_clk = clk;
> > +
> > +	clk = devm_clk_get(dsi->dev, "tx_esc");
> > +	if (IS_ERR(clk)) {
> > +		ret = PTR_ERR(clk);
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to get tx_esc clock: %d\n",
> > +			      ret);
> > +		return ret;
> > +	}
> > +	dsi->tx_esc_clk = clk;
> > +
> > +	dsi->mux = devm_mux_control_get(dsi->dev, NULL);
> > +	if (IS_ERR(dsi->mux)) {
> > +		ret = PTR_ERR(dsi->mux);
> > +		if (ret != -EPROBE_DEFER)
> > +			DRM_DEV_ERROR(dsi->dev, "Failed to get mux: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	base = devm_platform_ioremap_resource(pdev, 0);
> > +	if (IS_ERR(base))
> > +		return PTR_ERR(base);
> > +
> > +	dsi->regmap =
> > +		devm_regmap_init_mmio(dsi->dev, base, &nwl_dsi_regmap_config);
> > +	if (IS_ERR(dsi->regmap)) {
> > +		ret = PTR_ERR(dsi->regmap);
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to create NWL DSI regmap: %d\n",
> > +			      ret);
> > +		return ret;
> > +	}
> > +
> > +	dsi->irq = platform_get_irq(pdev, 0);
> > +	if (dsi->irq < 0) {
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to get device IRQ: %d\n",
> > +			      dsi->irq);
> > +		return dsi->irq;
> > +	}
> > +
> > +	dsi->rstc = devm_reset_control_array_get(dsi->dev, false, true);
> > +	if (IS_ERR(dsi->rstc)) {
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to get resets: %ld\n",
> > +			      PTR_ERR(dsi->rstc));
> > +		return PTR_ERR(dsi->rstc);
> > +	}
> 
> 
> You should not error log in case of EPROBE_DEFER.

Added a check.

> 
> 
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx8mq_dsi_select_input(struct nwl_dsi *dsi)
> > +{
> > +	struct device_node *remote;
> > +	u32 use_dcss = 1;
> > +	int ret;
> > +
> > +	remote = of_graph_get_remote_node(dsi->dev->of_node, 0, 0);
> > +	if (strcmp(remote->name, "lcdif") == 0)
> > +		use_dcss = 0;
> 
> 
> Checking name of remote note does not look correct, you should check
> only props from your node.
> 
> If the ip has separate lines for DCSS and LCDIF you should distinguish
> by port number. If they are shared

I changed it to be based on endpoint. Hope it makes sense now.

Cheers and thanks again for your review,
 -- Guido


> 
> you can use endpoint number to specify DCSS or LCDIF, in both cases
> bindings should be adjusted.
> 
> 
> Regards
> 
> Andrzej
> 
> 
> > +
> > +	DRM_DEV_INFO(dsi->dev, "Using %s as input source\n",
> > +		     (use_dcss) ? "DCSS" : "LCDIF");
> > +
> > +	ret = mux_control_try_select(dsi->mux, use_dcss);
> > +	if (ret < 0)
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to select input: %d\n", ret);
> > +
> > +	of_node_put(remote);
> > +	return ret;
> > +}
> > +
> > +
> > +static int imx8mq_dsi_deselect_input(struct nwl_dsi *dsi)
> > +{
> > +	int ret;
> > +
> > +	ret = mux_control_deselect(dsi->mux);
> > +	if (ret < 0)
> > +		DRM_DEV_ERROR(dsi->dev, "Failed to deselect input: %d\n", ret);
> > +
> > +	return ret;
> > +}
> > +
> > +
> > +static int imx8mq_dsi_poweron(struct nwl_dsi *dsi)
> > +{
> > +	int ret = 0;
> > +
> > +	/* otherwise the display stays blank */
> > +	usleep_range(200, 300);
> > +
> > +	if (dsi->rstc)
> > +		ret = reset_control_deassert(dsi->rstc);
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx8mq_dsi_poweroff(struct nwl_dsi *dsi)
> > +{
> > +	int ret = 0;
> > +
> > +	if (dsi->quirks & SRC_RESET_QUIRK)
> > +		return 0;
> > +
> > +	if (dsi->rstc)
> > +		ret = reset_control_assert(dsi->rstc);
> > +	return ret;
> > +}
> > +
> > +static const struct drm_bridge_timings nwl_dsi_timings = {
> > +	.input_bus_flags = DRM_BUS_FLAG_DE_LOW,
> > +};
> > +
> > +static const struct nwl_dsi_platform_data imx8mq_dev = {
> > +	.poweron = &imx8mq_dsi_poweron,
> > +	.poweroff = &imx8mq_dsi_poweroff,
> > +	.select_input = &imx8mq_dsi_select_input,
> > +	.deselect_input = &imx8mq_dsi_deselect_input,
> > +	.clk_config = {
> > +		{ .id = NWL_DSI_CLK_CORE, .present = true },
> > +	},
> > +};
> > +
> > +static const struct of_device_id nwl_dsi_dt_ids[] = {
> > +	{ .compatible = "fsl,imx8mq-nwl-dsi", .data = &imx8mq_dev, },
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, nwl_dsi_dt_ids);
> > +
> > +static const struct soc_device_attribute nwl_dsi_quirks_match[] = {
> > +	{ .soc_id = "i.MX8MQ", .revision = "2.0",
> > +	  .data = (void *)(E11418_HS_MODE_QUIRK | SRC_RESET_QUIRK) },
> > +	{ /* sentinel. */ },
> > +};
> > +
> > +static int nwl_dsi_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	const struct of_device_id *of_id = of_match_device(nwl_dsi_dt_ids, dev);
> > +	const struct nwl_dsi_platform_data *pdata = of_id->data;
> > +	const struct soc_device_attribute *attr;
> > +	struct nwl_dsi *dsi;
> > +	int ret;
> > +
> > +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> > +	if (!dsi)
> > +		return -ENOMEM;
> > +
> > +	dsi->dev = dev;
> > +	dsi->pdata = pdata;
> > +
> > +	ret = nwl_dsi_parse_dt(dsi);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = devm_request_irq(dev, dsi->irq, nwl_dsi_irq_handler, 0,
> > +			       dev_name(dev), dsi);
> > +	if (ret < 0) {
> > +		DRM_DEV_ERROR(dev, "Failed to request IRQ %d: %d\n", dsi->irq,
> > +			      ret);
> > +		return ret;
> > +	}
> > +
> > +	dsi->dsi_host.ops = &nwl_dsi_host_ops;
> > +	dsi->dsi_host.dev = dev;
> > +	ret = mipi_dsi_host_register(&dsi->dsi_host);
> > +	if (ret) {
> > +		DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	attr = soc_device_match(nwl_dsi_quirks_match);
> > +	if (attr)
> > +		dsi->quirks = (uintptr_t)attr->data;
> > +
> > +	dsi->bridge.driver_private = dsi;
> > +	dsi->bridge.funcs = &nwl_dsi_bridge_funcs;
> > +	dsi->bridge.of_node = dev->of_node;
> > +	dsi->bridge.timings = &nwl_dsi_timings;
> > +
> > +	dev_set_drvdata(dev, dsi);
> > +	pm_runtime_enable(dev);
> > +	return 0;
> > +}
> > +
> > +static int nwl_dsi_remove(struct platform_device *pdev)
> > +{
> > +	struct nwl_dsi *dsi = platform_get_drvdata(pdev);
> > +
> > +	mipi_dsi_host_unregister(&dsi->dsi_host);
> > +	pm_runtime_disable(&pdev->dev);
> > +	return 0;
> > +}
> > +
> > +static struct platform_driver nwl_dsi_driver = {
> > +	.probe		= nwl_dsi_probe,
> > +	.remove		= nwl_dsi_remove,
> > +	.driver		= {
> > +		.of_match_table = nwl_dsi_dt_ids,
> > +		.name	= DRV_NAME,
> > +	},
> > +};
> > +
> > +module_platform_driver(nwl_dsi_driver);
> > +
> > +MODULE_AUTHOR("NXP Semiconductor");
> > +MODULE_AUTHOR("Purism SPC");
> > +MODULE_DESCRIPTION("Northwest Logic MIPI-DSI driver");
> > +MODULE_LICENSE("GPL"); /* GPLv2 or later */
> > diff --git a/drivers/gpu/drm/bridge/nwl-dsi.h b/drivers/gpu/drm/bridge/nwl-dsi.h
> > new file mode 100644
> > index 000000000000..a247a8a11c7c
> > --- /dev/null
> > +++ b/drivers/gpu/drm/bridge/nwl-dsi.h
> > @@ -0,0 +1,144 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * NWL MIPI DSI host driver
> > + *
> > + * Copyright (C) 2017 NXP
> > + * Copyright (C) 2019 Purism SPC
> > + */
> > +#ifndef __NWL_DSI_H__
> > +#define __NWL_DSI_H__
> > +
> > +/* DSI HOST registers */
> > +#define NWL_DSI_CFG_NUM_LANES			0x0
> > +#define NWL_DSI_CFG_NONCONTINUOUS_CLK		0x4
> > +#define NWL_DSI_CFG_T_PRE			0x8
> > +#define NWL_DSI_CFG_T_POST			0xc
> > +#define NWL_DSI_CFG_TX_GAP			0x10
> > +#define NWL_DSI_CFG_AUTOINSERT_EOTP		0x14
> > +#define NWL_DSI_CFG_EXTRA_CMDS_AFTER_EOTP	0x18
> > +#define NWL_DSI_CFG_HTX_TO_COUNT		0x1c
> > +#define NWL_DSI_CFG_LRX_H_TO_COUNT		0x20
> > +#define NWL_DSI_CFG_BTA_H_TO_COUNT		0x24
> > +#define NWL_DSI_CFG_TWAKEUP			0x28
> > +#define NWL_DSI_CFG_STATUS_OUT			0x2c
> > +#define NWL_DSI_RX_ERROR_STATUS			0x30
> > +
> > +/* DSI DPI registers */
> > +#define NWL_DSI_PIXEL_PAYLOAD_SIZE		0x200
> > +#define NWL_DSI_PIXEL_FIFO_SEND_LEVEL		0x204
> > +#define NWL_DSI_INTERFACE_COLOR_CODING		0x208
> > +#define NWL_DSI_PIXEL_FORMAT			0x20c
> > +#define NWL_DSI_VSYNC_POLARITY			0x210
> > +#define NWL_DSI_VSYNC_POLARITY_ACTIVE_LOW	0
> > +#define NWL_DSI_VSYNC_POLARITY_ACTIVE_HIGH	BIT(1)
> > +
> > +#define NWL_DSI_HSYNC_POLARITY			0x214
> > +#define NWL_DSI_HSYNC_POLARITY_ACTIVE_LOW	0
> > +#define NWL_DSI_HSYNC_POLARITY_ACTIVE_HIGH	BIT(1)
> > +
> > +#define NWL_DSI_VIDEO_MODE			0x218
> > +#define NWL_DSI_HFP				0x21c
> > +#define NWL_DSI_HBP				0x220
> > +#define NWL_DSI_HSA				0x224
> > +#define NWL_DSI_ENABLE_MULT_PKTS		0x228
> > +#define NWL_DSI_VBP				0x22c
> > +#define NWL_DSI_VFP				0x230
> > +#define NWL_DSI_BLLP_MODE			0x234
> > +#define NWL_DSI_USE_NULL_PKT_BLLP		0x238
> > +#define NWL_DSI_VACTIVE				0x23c
> > +#define NWL_DSI_VC				0x240
> > +
> > +/* DSI APB PKT control */
> > +#define NWL_DSI_TX_PAYLOAD			0x280
> > +#define NWL_DSI_PKT_CONTROL			0x284
> > +#define NWL_DSI_SEND_PACKET			0x288
> > +#define NWL_DSI_PKT_STATUS			0x28c
> > +#define NWL_DSI_PKT_FIFO_WR_LEVEL		0x290
> > +#define NWL_DSI_PKT_FIFO_RD_LEVEL		0x294
> > +#define NWL_DSI_RX_PAYLOAD			0x298
> > +#define NWL_DSI_RX_PKT_HEADER			0x29c
> > +
> > +/* DSI IRQ handling */
> > +#define NWL_DSI_IRQ_STATUS			0x2a0
> > +#define NWL_DSI_SM_NOT_IDLE			BIT(0)
> > +#define NWL_DSI_TX_PKT_DONE			BIT(1)
> > +#define NWL_DSI_DPHY_DIRECTION			BIT(2)
> > +#define NWL_DSI_TX_FIFO_OVFLW			BIT(3)
> > +#define NWL_DSI_TX_FIFO_UDFLW			BIT(4)
> > +#define NWL_DSI_RX_FIFO_OVFLW			BIT(5)
> > +#define NWL_DSI_RX_FIFO_UDFLW			BIT(6)
> > +#define NWL_DSI_RX_PKT_HDR_RCVD			BIT(7)
> > +#define NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD	BIT(8)
> > +#define NWL_DSI_BTA_TIMEOUT			BIT(29)
> > +#define NWL_DSI_LP_RX_TIMEOUT			BIT(30)
> > +#define NWL_DSI_HS_TX_TIMEOUT			BIT(31)
> > +
> > +#define NWL_DSI_IRQ_STATUS2			0x2a4
> > +#define NWL_DSI_SINGLE_BIT_ECC_ERR		BIT(0)
> > +#define NWL_DSI_MULTI_BIT_ECC_ERR		BIT(1)
> > +#define NWL_DSI_CRC_ERR				BIT(2)
> > +
> > +#define NWL_DSI_IRQ_MASK			0x2a8
> > +#define NWL_DSI_SM_NOT_IDLE_MASK		BIT(0)
> > +#define NWL_DSI_TX_PKT_DONE_MASK		BIT(1)
> > +#define NWL_DSI_DPHY_DIRECTION_MASK		BIT(2)
> > +#define NWL_DSI_TX_FIFO_OVFLW_MASK		BIT(3)
> > +#define NWL_DSI_TX_FIFO_UDFLW_MASK		BIT(4)
> > +#define NWL_DSI_RX_FIFO_OVFLW_MASK		BIT(5)
> > +#define NWL_DSI_RX_FIFO_UDFLW_MASK		BIT(6)
> > +#define NWL_DSI_RX_PKT_HDR_RCVD_MASK		BIT(7)
> > +#define NWL_DSI_RX_PKT_PAYLOAD_DATA_RCVD_MASK	BIT(8)
> > +#define NWL_DSI_BTA_TIMEOUT_MASK		BIT(29)
> > +#define NWL_DSI_LP_RX_TIMEOUT_MASK		BIT(30)
> > +#define NWL_DSI_HS_TX_TIMEOUT_MASK		BIT(31)
> > +
> > +#define NWL_DSI_IRQ_MASK2			0x2ac
> > +#define NWL_DSI_SINGLE_BIT_ECC_ERR_MASK		BIT(0)
> > +#define NWL_DSI_MULTI_BIT_ECC_ERR_MASK		BIT(1)
> > +#define NWL_DSI_CRC_ERR_MASK			BIT(2)
> > +
> > +/*
> > + * PKT_CONTROL format:
> > + * [15: 0] - word count
> > + * [17:16] - virtual channel
> > + * [23:18] - data type
> > + * [24]	   - LP or HS select (0 - LP, 1 - HS)
> > + * [25]	   - perform BTA after packet is sent
> > + * [26]	   - perform BTA only, no packet tx
> > + */
> > +#define NWL_DSI_WC(x)		FIELD_PREP(GENMASK(15, 0), (x))
> > +#define NWL_DSI_TX_VC(x)	FIELD_PREP(GENMASK(17, 16), (x))
> > +#define NWL_DSI_TX_DT(x)	FIELD_PREP(GENMASK(23, 18), (x))
> > +#define NWL_DSI_HS_SEL(x)	FIELD_PREP(GENMASK(24, 24), (x))
> > +#define NWL_DSI_BTA_TX(x)	FIELD_PREP(GENMASK(25, 25), (x))
> > +#define NWL_DSI_BTA_NO_TX(x)	FIELD_PREP(GENMASK(26, 26), (x))
> > +
> > +/*
> > + * RX_PKT_HEADER format:
> > + * [15: 0] - word count
> > + * [21:16] - data type
> > + * [23:22] - virtual channel
> > + */
> > +#define NWL_DSI_RX_DT(x)	FIELD_GET(GENMASK(21, 16), (x))
> > +#define NWL_DSI_RX_VC(x)	FIELD_GET(GENMASK(23, 22), (x))
> > +
> > +/* DSI Video mode */
> > +#define NWL_DSI_VM_BURST_MODE_WITH_SYNC_PULSES		0
> > +#define NWL_DSI_VM_NON_BURST_MODE_WITH_SYNC_EVENTS	BIT(0)
> > +#define NWL_DSI_VM_BURST_MODE				BIT(1)
> > +
> > +/* * DPI color coding */
> > +#define NWL_DSI_DPI_16_BIT_565_PACKED	0
> > +#define NWL_DSI_DPI_16_BIT_565_ALIGNED	1
> > +#define NWL_DSI_DPI_16_BIT_565_SHIFTED	2
> > +#define NWL_DSI_DPI_18_BIT_PACKED	3
> > +#define NWL_DSI_DPI_18_BIT_ALIGNED	4
> > +#define NWL_DSI_DPI_24_BIT		5
> > +
> > +/* * DPI Pixel format */
> > +#define NWL_DSI_PIXEL_FORMAT_16  0
> > +#define NWL_DSI_PIXEL_FORMAT_18  BIT(0)
> > +#define NWL_DSI_PIXEL_FORMAT_18L BIT(1)
> > +#define NWL_DSI_PIXEL_FORMAT_24  (BIT(0) | BIT(1))
> > +
> > +#endif /* __NWL_DSI_H__ */
> 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel