Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752614AbWAHJkS (ORCPT ); Sun, 8 Jan 2006 04:40:18 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752616AbWAHJkS (ORCPT ); Sun, 8 Jan 2006 04:40:18 -0500 Received: from tornado.reub.net ([202.89.145.182]:18864 "EHLO tornado.reub.net") by vger.kernel.org with ESMTP id S1752614AbWAHJkR convert rfc822-to-8bit (ORCPT ); Sun, 8 Jan 2006 04:40:17 -0500 Message-ID: <43C0DDFB.6050806@reub.net> Date: Sun, 08 Jan 2006 22:40:11 +1300 From: Reuben Farrelly User-Agent: Thunderbird 1.6a1 (Windows/20060107) MIME-Version: 1.0 To: "Brown, Len" CC: Andrew Morton , linux-kernel@vger.kernel.org, Jeff Garzik , Stephen Hemminger Subject: Re: 2.6.15-mm2 References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8115 Lines: 197 Hi, On 8/01/2006 9:19 p.m., Brown, Len wrote: > >>> 2. Notice above how the sky2 driver is being bailed out: >>> >>> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177 >>> sky2 Cannot find PowerManagement capability, aborting. >>> sky2: probe of 0000:04:00.0 failed with error -5 >>> >>> ...so I'm not sure if it's the driver or something else >>> like ACPI that is the root cause. >> Could be acpi, yes. > > Any difference if you boot with "acpi=off" or "pci=noacpi"? > If that fixes it, then ACPI is shomehow involved in the problem. > If it doesn't fix it, then ACPI is not involved. Big difference, but probably not the sort of difference you were hoping for ;) kernel /vmlinuz-2.6.15-mm2 ro root=/dev/md0 panic=60 console=ttyS0,57600 single acpi=off [Linux-bzImage, setup=0x1400, size=0x1842ed] Linux version 2.6.15-mm2 (root@tornado.reub.net) (gcc version 4.1.0 20051222 (Red Hat 4.1.0-0.12)) #1 SMP Sun Jan 8 11:50:13 NZDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe2f800 (usable) BIOS-e820: 000000003fe2f800 - 000000003fe3f8e3 (ACPI NVS) BIOS-e820: 000000003ff2f800 - 000000003ff30000 (ACPI NVS) BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000feda0000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: Grantsdale-G APIC at: 0xFEE00000 Processor #0 15:3 APIC version 20 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 2800.280 MHz processor. Built 1 zonelists Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600 single acpi=off CPU 0 irqstacks, hard=c0405000 soft=c0403000 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033572k/1046716k available (2142k kernel code, 12480k reserved, 715k data, 200k init, 129212k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5607.11 BogoMIPS (lpj=11214232) Mount-cache hash table entries: 512 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04 Total of 1 processors activated (5607.11 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20051216 ACPI: Interpreter disabled. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 209 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 185 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 209 PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 185 PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 193 PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:06:00.0[A] -> IRQ 201 PCI->APIC IRQ transform: 0000:06:02.0[A] -> IRQ 185 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ffa00000-ffafffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: ff600000-ff6fffff PREFETCH window: fdb00000-fdbfffff PCI: Bridge: 0000:00:1c.1 IO window: a000-afff MEM window: ff700000-ff7fffff PREFETCH window: fdc00000-fdcfffff PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: ff800000-ff8fffff PREFETCH window: fdd00000-fddfffff PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: ff900000-ff9fffff PREFETCH window: fde00000-fdefffff PCI: Bridge: 0000:00:1e.0 IO window: b000-bfff MEM window: ff500000-ff5fffff PREFETCH window: fe000000-fe7fffff PCI: No IRQ known for interrupt pin A of device 0000:00:01.0. Probably buggy MP table. PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Probably buggy MP table. PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Probably buggy MP table. PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Probably buggy MP table. PCI: No IRQ known for interrupt pin D of device 0000:00:1c.3. Probably buggy MP table. Machine check exception polling timer started. highmem bounce pool size: 64 pages Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered<6>Time: tsc clocksource has been installed. PCI: No IRQ known for interrupt pin A of device 0000:00:01.0. Probably buggy MP table. pcie_portdrv_probe->Dev[2585:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Probably buggy MP table. pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Probably buggy MP table. pcie_portdrv_probe->Dev[2662:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Probably buggy MP table. pcie_portdrv_probe->Dev[2664:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability PCI: No IRQ known for interrupt pin D of device 0000:00:1c.3. Probably buggy MP table. pcie_portdrv_probe->Dev[2666:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 0000:06:02.0: ttyS1 at I/O 0xbc00 (irq = 185) is a 16550A 0000:06:02.0: ttyS2 at I/O 0xbc08 (irq = 185) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sky2 v0.11 addr 0xff720000 irq 177 Yukon-EC (0xb6) rev 1 sky2 eth0: addr 00:11:11:43:05:2f sky2 0000:04:00.0: pci express error (0x0) sky2 0000:04:00.0: pci express error (0x0) sky2 0000:04:00.0: pci express error (0x0) sky2 0000:04:00.0: pci express error (0x0) sky2 0000:04:00.0: pci express error (0x0) sky2 0000:04:00.0: pci express error (0x0) reuben - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/