Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Thara Gopinath <thara.gopinath@linaro.org>
To:     mingo@redhat.com, peterz@infradead.org, ionela.voinescu@arm.com,
        vincent.guittot@linaro.org, rui.zhang@intel.com,
        edubezval@gmail.com, qperret@google.com
Cc:     linux-kernel@vger.kernel.org, amit.kachhap@gmail.com,
        javi.merino@kernel.org, daniel.lezcano@linaro.org
Subject: [Patch v4 6/6] sched: thermal: Enable tuning of decay period
Date:   Tue, 22 Oct 2019 16:34:25 -0400
Message-Id: <1571776465-29763-7-git-send-email-thara.gopinath@linaro.org>
In-Reply-To: <1571776465-29763-1-git-send-email-thara.gopinath@linaro.org>
References: <1571776465-29763-1-git-send-email-thara.gopinath@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Thermal pressure follows pelt signas which means the
decay period for thermal pressure is the default pelt
decay period. Depending on soc charecteristics and thermal
activity, it might be beneficial to decay thermal pressure
slower, but still in-tune with the pelt signals.
One way to achieve this is to provide a command line parameter
to set the decay coefficient to an integer between 0 and 10.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
v3->v4:
	- Removed the sysctl setting to tune decay period and instead
	  introduced a command line parameter to control it. The rationale
	  here being changing decay period of a PELT signal runtime can
	  result in a skewed average value for atleast some cycles.

 Documentation/admin-guide/kernel-parameters.txt |  5 +++++
 kernel/sched/thermal.c                          | 25 ++++++++++++++++++++++++-
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a84a83f..61d7baa 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4273,6 +4273,11 @@
 			incurs a small amount of overhead in the scheduler
 			but is useful for debugging and performance tuning.
 
+	sched_thermal_decay_coeff=
+			[KNL, SMP] Set decay coefficient for thermal pressure signal.
+			Format: integer betweer 0 and 10
+			Default is 0.
+
 	skew_tick=	[KNL] Offset the periodic timer tick per cpu to mitigate
 			xtime_lock contention on larger systems, and/or RCU lock
 			contention on all systems with CONFIG_MAXSMP set.
diff --git a/kernel/sched/thermal.c b/kernel/sched/thermal.c
index 0c84960..0da31e1 100644
--- a/kernel/sched/thermal.c
+++ b/kernel/sched/thermal.c
@@ -10,6 +10,28 @@
 #include "pelt.h"
 #include "thermal.h"
 
+/**
+ * By default the decay is the default pelt decay period.
+ * The decay coefficient can change is decay period in
+ * multiples of 32.
+ *   Decay coefficient    Decay period(ms)
+ *	0			32
+ *	1			64
+ *	2			128
+ *	3			256
+ *	4			512
+ */
+static int sched_thermal_decay_coeff;
+
+static int __init setup_sched_thermal_decay_coeff(char *str)
+{
+	if (kstrtoint(str, 0, &sched_thermal_decay_coeff))
+		pr_warn("Unable to set scheduler thermal pressure decay coefficient\n");
+
+	return 1;
+}
+__setup("sched_thermal_decay_coeff=", setup_sched_thermal_decay_coeff);
+
 static DEFINE_PER_CPU(unsigned long, delta_capacity);
 
 /**
@@ -40,6 +62,7 @@ void update_thermal_pressure(int cpu, u64 capped_freq_ratio)
  */
 void trigger_thermal_pressure_average(struct rq *rq)
 {
-	update_thermal_load_avg(rq_clock_task(rq), rq,
+	update_thermal_load_avg(rq_clock_task(rq) >>
+				sched_thermal_decay_coeff, rq,
 				per_cpu(delta_capacity, cpu_of(rq)));
 }
-- 
2.1.4