Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Kishon Vijay Abraham I <kishon@ti.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Roger Quadros <rogerq@ti.com>, Jyri Sarha <jsarha@ti.com>
CC:     Anil Varughese <aniljoy@cadence.com>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v2 00/14] PHY: Add support for SERDES in TI's J721E SoC
Date:   Wed, 23 Oct 2019 18:27:21 +0530
Message-ID: <20191023125735.4713-1-kishon@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

TI's J721E SoC uses Cadence Sierra SERDES for USB, PCIe and SGMII.
TI has a wrapper named WIZ to control input signals to Sierra and
Torrent SERDES.

This patch series:
 1) Add support to WIZ module present in TI's J721E SoC
 2) Adapt Cadence Sierra PHY driver to be used for J721E SoC

Changes from v1:
 *) Change the dt binding Documentation of WIZ wrapper to YAML format
 *) Fix an issue in Sierra while doimg rmmod

Anil Varughese (1):
  phy: cadence: Sierra: Configure both lane cdb and common cdb registers
    for external SSC

Kishon Vijay Abraham I (13):
  dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
  phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional
    resources
  phy: cadence: Sierra: Use "regmap" for read and write to Sierra
    registers
  phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
  phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
  phy: cadence: Sierra: Modify register macro names to be in sync with
    Sierra user guide
  phy: cadence: Sierra: Get reset control "array" for each link
  phy: cadence: Sierra: Check for PLL lock during PHY power on
  phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
  phy: cadence: Sierra: Set cmn_refclk/cmn_refclk1 frequency to 25MHz
  phy: cadence: Sierra: Use correct dev pointer in
    cdns_sierra_phy_remove()
  dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
  phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC

 .../bindings/phy/phy-cadence-sierra.txt       |  13 +-
 .../bindings/phy/ti,phy-j721e-wiz.yaml        | 159 +++
 drivers/phy/cadence/phy-cadence-sierra.c      | 697 +++++++++++---
 drivers/phy/ti/Kconfig                        |  15 +
 drivers/phy/ti/Makefile                       |   1 +
 drivers/phy/ti/phy-j721e-wiz.c                | 904 ++++++++++++++++++
 6 files changed, 1650 insertions(+), 139 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
 create mode 100644 drivers/phy/ti/phy-j721e-wiz.c

-- 
2.17.1