Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Fri, 25 Oct 2019 20:07:43 +0200
From:   Andreas Kemnade <andreas@kemnade.info>
To:     Shawn Guo <shawnguo@kernel.org>
Cc:     robh+dt@kernel.org, mark.rutland@arm.com, s.hauer@pengutronix.de,
        kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
        manivannan.sadhasivam@linaro.org, andrew.smirnov@gmail.com,
        marex@denx.de, angus@akkea.ca, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        j.neuschaefer@gmx.net,
        Discussions about the Letux Kernel 
        <letux-kernel@openphoenux.org>,
        Marco Felsch <m.felsch@pengutronix.de>
Subject: Re: [PATCH v3 3/3] ARM: dts: imx: add devicetree for Kobo Clara HD
Message-ID: <20191025200743.48455cc9@aktux>
In-Reply-To: <20191025134621.GN3208@dragon>
References: <20191010192357.27884-1-andreas@kemnade.info>
        <20191010192357.27884-4-andreas@kemnade.info>
        <20191025134621.GN3208@dragon>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

On Fri, 25 Oct 2019 21:46:24 +0800
Shawn Guo <shawnguo@kernel.org> wrote:

[...]
> > +
> > +		pinctrl_wifi_reset: wifi_reset_grp {
> > +			fsl,pins = <
> > +				MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059		/* WIFI_RST */
> > +			>;
> > +		};
> > +
> > +		pinctrl_wifi_power: wifi_power_grp {  
> 
> I guess you can have one pinctrl node to include both reset and power
> pins?  Also, to be consistent with other pinctrl nodes on naming, the
> node name should probably be wifigrp.
> 
well, the problems they are used in different nodes, so I cannot do
that:

       reg_wifi: regulator-wifi {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_wifi_power>;
                regulator-name = "SD3_SPWR";
                regulator-min-microvolt = <3000000>;
                regulator-max-microvolt = <3000000>;
                gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };

        wifi_pwrseq: wifi_pwrseq {
                compatible = "mmc-pwrseq-simple";
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_wifi_reset>;
                post-power-on-delay-ms = <20>;
                reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
        };

So having them combined breaks the mux where you use it rule.
I got in earlier mails:

> > +	wifi_pwrseq: wifi_pwrseq {
> > +		compatible = "mmc-pwrseq-simple";
> > +		post-power-on-delay-ms = <20>;
> > +		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;  

> Can you add a pinctrl-entry here please? The general rule is to mux
> things where you use it
[...]
> > +			compatible = "regulator-fixed";
> > +			regulator-name = "SD3_SPWR";
> > +			regulator-min-microvolt = <3000000>;
> > +			regulator-max-microvolt = <3000000>;
> > +
> > +			gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;  

> Please add a pinctrl here to mux this gpio.

Regards,
Andreas