Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     narmstrong@baylibre.com, jbrunet@baylibre.com,
        linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc:     robh+dt@kernel.org, mark.rutland@arm.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        Rob Herring <robh@kernel.org>
Subject: [PATCH v2 1/5] dt-bindings: clock: meson8b: add the clock inputs
Date:   Sun, 27 Oct 2019 17:18:01 +0100
Message-Id: <20191027161805.1176321-2-martin.blumenstingl@googlemail.com>
In-Reply-To: <20191027161805.1176321-1-martin.blumenstingl@googlemail.com>
References: <20191027161805.1176321-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The clock controller on Meson8/Meson8b/Meson8m2 has three (known)
inputs:
- "xtal": the main 24MHz crystal
- "ddr_pll": some of the audio clocks use the output of the DDR PLL as
  input
- "clk_32k": an optional clock signal which can be connected to GPIOAO_6
  (which then has to be switched to the CLK_32K_IN function)

Add the inputs to the documentation so we can wire up these inputs in a
follow-up patch.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../devicetree/bindings/clock/amlogic,meson8b-clkc.txt       | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
index 4d94091c1d2d..cc51e4746b3b 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -11,6 +11,11 @@ Required Properties:
 	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
 - #clock-cells: should be 1.
 - #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+  * "xtal": the 24MHz system oscillator
+  * "ddr_pll": the DDR PLL clock
+  * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
 
 Parent node should have the following properties :
 - compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
-- 
2.23.0