Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     narmstrong@baylibre.com, jbrunet@baylibre.com,
        linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc:     robh+dt@kernel.org, mark.rutland@arm.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH v2 5/5] ARM: dts: meson8b: add the DDR clock controller
Date:   Sun, 27 Oct 2019 17:23:28 +0100
Message-Id: <20191027162328.1177402-6-martin.blumenstingl@googlemail.com>
In-Reply-To: <20191027162328.1177402-1-martin.blumenstingl@googlemail.com>
References: <20191027162328.1177402-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add the DDR clock controller and pass it's DDR_CLKID_DDR_PLL to the main
(HHI) clock controller as "ddr_clk". The "ddr_clk" is used as one of the
inputs for the audio clock muxes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm/boot/dts/meson8b.dtsi | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 1934666ff60f..8ac8bdfaf58f 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -4,6 +4,7 @@
  * Author: Carlo Caione <carlo@endlessm.com>
  */
 
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
@@ -172,6 +173,14 @@
 		#size-cells = <1>;
 		ranges = <0x0 0xc8000000 0x8000>;
 
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
 		dmcbus: bus@6000 {
 			compatible = "simple-bus";
 			reg = <0x6000 0x400>;
@@ -434,8 +443,8 @@
 &hhi {
 	clkc: clock-controller {
 		compatible = "amlogic,meson8-clkc";
-		clocks = <&xtal>;
-		clock-names = "xtal";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
-- 
2.23.0