Received: by 2002:a25:d7c1:0:0:0:0:0 with SMTP id o184csp4706098ybg; Tue, 29 Oct 2019 11:10:22 -0700 (PDT) X-Google-Smtp-Source: APXvYqw9VOVVwqCiHxEHJwEemGQ6OvBfuDu+ArHZD17MBU8QuUYcYsaJbBUrfr0TovBcqt8xAoj+ X-Received: by 2002:aa7:db88:: with SMTP id u8mr27738798edt.278.1572372622555; Tue, 29 Oct 2019 11:10:22 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1572372622; cv=none; d=google.com; s=arc-20160816; b=RGzt4HftTqzeOyz4Ial/w5q5aR1CV/ZwwAFjFbqW2KOjjQpIhUF+DkB+V7xUa7+nqP I98y09IpUMQ4lKj9uZJ70z8JrkKfJneEu64trPnIrbrvKu9YqZ2IHCb72+JVIwpLu4YC JNrW6TFNDOOQE5iqYU+lelqEj8PetsnKpRdBERDLeTz7VOJrYAhO8j/FT7KB1ED0e+Sw ZquYrR7Q61IfBcMiyRpjtF5Yv9xRaUtXvR2HZ3ndihE5/ld4CcZYdeGA/YCRwCHLG+wT lnbIU8s5h8QZXp4gTzZAyzyONOmWHyRRyM1hbo3zzrP2YaYGgmzUiTzxnkdzmqSXTgol +mTA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:content-transfer-encoding :content-language:accept-language:in-reply-to:references:message-id :date:thread-index:thread-topic:subject:cc:to:from; bh=U9WyWWpmXnKMQGDqTcDveTxxIAq+m6SeQRQvPygzt5U=; b=xiuG8gtAY85vvys/W2OOREZj4tv1p0GM8D0HFrGXDndPs+b2FILY/iVq3mJn7/sGJB fc1mU7Hgy/sBkUcHjfZ1u1whou1tQhrdKIns9/MkcqLwJbQgHAKmMnj1C0rpJiSpa/4e jFn3Ewv7BYb+mWuznw8LaKazfT0rzs+3usgI1OAr4qw380++AoORc8zFghfUPlvZ9pi9 qkcNVaSildoeQBEA10BcC6W+QSVo6q40FQ2RDtwX0/tvE+yIQo5VKQhCfZBadDQO32Sk N12PJjmosz99BVXsgmgMXXDaucrDxEpifQ8zDWHhb9u4ByZ4hWcmiN2aZXwNIynSrI70 wOAg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id q4si8322861ejb.136.2019.10.29.11.09.55; Tue, 29 Oct 2019 11:10:22 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730333AbfJ2L15 convert rfc822-to-8bit (ORCPT + 99 others); Tue, 29 Oct 2019 07:27:57 -0400 Received: from skedge03.snt-world.com ([91.208.41.68]:45602 "EHLO skedge03.snt-world.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730258AbfJ2L14 (ORCPT ); Tue, 29 Oct 2019 07:27:56 -0400 Received: from sntmail10s.snt-is.com (unknown [10.203.32.183]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by skedge03.snt-world.com (Postfix) with ESMTPS id E307860CF47; Tue, 29 Oct 2019 12:27:51 +0100 (CET) Received: from sntmail12r.snt-is.com (10.203.32.182) by sntmail10s.snt-is.com (10.203.32.183) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.1713.5; Tue, 29 Oct 2019 12:27:51 +0100 Received: from sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305]) by sntmail12r.snt-is.com ([fe80::e551:8750:7bba:3305%3]) with mapi id 15.01.1713.004; Tue, 29 Oct 2019 12:27:51 +0100 From: Schrempf Frieder To: Krzysztof Kozlowski , Fabio Estevam , Schrempf Frieder , Mark Rutland , NXP Linux Team , "Pengutronix Kernel Team" , Rob Herring , "Sascha Hauer" , Shawn Guo CC: "devicetree@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , "linux-kernel@vger.kernel.org" Subject: [PATCH v2 03/11] ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file Thread-Topic: [PATCH v2 03/11] ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file Thread-Index: AQHVjkvmcQscreMWdkCLe6rbkfcQEA== Date: Tue, 29 Oct 2019 11:27:51 +0000 Message-ID: <20191029112655.15058-4-frieder.schrempf@kontron.de> References: <20191029112655.15058-1-frieder.schrempf@kontron.de> In-Reply-To: <20191029112655.15058-1-frieder.schrempf@kontron.de> Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-mailer: git-send-email 2.17.1 x-originating-ip: [172.25.9.193] x-c2processedorg: 51b406b7-48a2-4d03-b652-521f56ac89f3 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 X-SnT-MailScanner-Information: Please contact the ISP for more information X-SnT-MailScanner-ID: E307860CF47.A1656 X-SnT-MailScanner: Not scanned: please contact your Internet E-Mail Service Provider for details X-SnT-MailScanner-SpamCheck: X-SnT-MailScanner-From: frieder.schrempf@kontron.de X-SnT-MailScanner-To: devicetree@vger.kernel.org, festevam@gmail.com, kernel@pengutronix.de, krzk@kernel.org, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, mark.rutland@arm.com, robh+dt@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org X-Spam-Status: No Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Frieder Schrempf The baseboard for the Kontron N6310 SoM is also used for other SoMs such as N6311 and N6411. In order to share the code, we move the definitions of the baseboard to a separate dtsi file. Signed-off-by: Frieder Schrempf --- arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 405 +---------------- arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 414 ++++++++++++++++++ 2 files changed, 415 insertions(+), 404 deletions(-) create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts index 0205fd56d975..5a3e06d6219b 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts @@ -8,413 +8,10 @@ /dts-v1/; #include "imx6ul-kontron-n6310-som.dtsi" +#include "imx6ul-kontron-n6x1x-s.dtsi" / { model = "Kontron N6310 S"; compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som", "fsl,imx6ul"; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - led1 { - label = "debug-led1"; - gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - - led2 { - label = "debug-led2"; - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3 { - label = "debug-led3"; - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - pwm-beeper { - compatible = "pwm-beeper"; - pwms = <&pwm8 0 5000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_usb_otg1_vbus: regulator-usb-otg1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_vref_adc: regulator-vref-adc { - compatible = "regulator-fixed"; - regulator-name = "vref-adc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&adc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc1>; - num-channels = <3>; - vref-supply = <®_vref_adc>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan2>; - status = "okay"; -}; - -&ecspi1 { - cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - eeprom@0 { - compatible = "anvo,anv32e61w", "atmel,at25"; - reg = <0>; - spi-max-frequency = <20000000>; - spi-cpha; - spi-cpol; - pagesize = <1>; - size = <8192>; - address-width = <16>; - }; -}; - -&fec1 { - pinctrl-0 = <&pinctrl_enet1>; - /delete-node/ mdio; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; - phy-mode = "rmii"; - phy-handle = <ðphy2>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy1: ethernet-phy@1 { - reg = <1>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET_REF>; - clock-names = "rmii-ref"; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; - micrel,led-mode = <0>; - clocks = <&clks IMX6UL_CLK_ENET2_REF>; - clock-names = "rmii-ref"; - }; - }; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; -}; - -&i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; - - rtc@32 { - compatible = "epson,rx8900"; - reg = <0x32>; - }; -}; - -&pwm8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm8>; - status = "okay"; -}; - -&snvs_poweroff { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - linux,rs485-enabled-at-boot-time; - rs485-rx-during-tx; - rs485-rts-active-low; - uart-has-rtscts; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&usbotg1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg1>; - dr_mode = "otg"; - srp-disable; - hnp-disable; - adp-disable; - vbus-supply = <®_usb_otg1_vbus>; - status = "okay"; -}; - -&usbotg2 { - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - non-removable; - keep-power-in-suspend; - wakeup-source; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; - - pinctrl_adc1: adc1grp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 - MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 - MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 - >; - }; - - /* FRAM */ - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 - MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 - MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 - MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ - >; - }; - - pinctrl_enet2: enet2grp { - fsl,pins = < - MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 - MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 - MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 - >; - }; - - pinctrl_enet2_mdio: enet2mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - >; - }; - - pinctrl_flexcan2: flexcan2grp{ - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 - MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 - >; - }; - - pinctrl_gpio: gpiogrp { - fsl,pins = < - MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ - MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ - MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ - MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ - MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ - MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 - MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 - MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 - >; - }; - - pinctrl_pwm8: pwm8grp { - fsl,pins = < - MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 - MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 - MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 - MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 - /* - * mux unused RTS to make sure it doesn't cause - * any interrupts when it is undefined - */ - MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 - MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 - MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 - MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 - >; - }; - - pinctrl_usbotg1: usbotg1 { - fsl,pins = < - MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi new file mode 100644 index 000000000000..7c98a1a46fb1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski + */ + +#include + +/ { + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + num-channels = <3>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + /* FRAM */ + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; -- 2.17.1