Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Corentin Labbe <clabbe@baylibre.com>
To:     mark.rutland@arm.com, mripard@kernel.org, robh+dt@kernel.org,
        wens@csie.org, jernej.skrabec@siol.net
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: 
Date:   Wed, 30 Oct 2019 12:24:12 +0000
Message-Id: <1572438255-26107-1-git-send-email-clabbe@baylibre.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Corentin Labbe <clabbe@baylibre.com>
Date: Wed, 30 Oct 2019 11:54:51 +0100
Subject: [PATCH v3 0/3] ARM64: dts: allwinner: Add devicetree for pine H64 modelA

Hello

Pineh64 have two existing model (A and B) with some hardware difference and
so need two different DT file.
But the current situation has only one file for both.
This serie fix this situation by being more clear on which DT file is
needed for both model.

Regards

Change since v2:
- Added the HDMI connector node to model A

Changes since v1:
- Added the first patch for stating which model support the
  sun50i-h6-pine-h64.dts

Corentin Labbe (3):
  ARM64: dts: sun50i-h6-pine-h64: state that the DT supports the modelB
  ARM64: dts: sun50i-h6-pine-h64: add the hdmi_connector label
  ARM64: dts: allwinner: add pineh64 model A

 .../devicetree/bindings/arm/sunxi.yaml        |  9 ++++--
 arch/arm64/boot/dts/allwinner/Makefile        |  1 +
 .../allwinner/sun50i-h6-pine-h64-modelA.dts   | 30 +++++++++++++++++++
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts |  6 ++--
 4 files changed, 41 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA.dts

-- 
2.23.0