Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Florian Fainelli <f.fainelli@gmail.com>
To:     linux-kernel@vger.kernel.org
Cc:     Florian Fainelli <f.fainelli@gmail.com>,
        Markus Mayer <mmayer@broadcom.com>,
        bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM STB AVS TMON
        DRIVER), Zhang Rui <rui.zhang@intel.com>,
        Eduardo Valentin <edubezval@gmail.com>,
        Daniel Lezcano <daniel.lezcano@linaro.org>,
        Amit Kucheria <amit.kucheria@verdurent.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        linux-pm@vger.kernel.org (open list:BROADCOM STB AVS TMON DRIVER),
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM BCM7XXX
        ARM ARCHITECTURE)
Subject: [PATCH 6/6] thermal: brcmstb_thermal: Register different ops per process
Date:   Wed, 30 Oct 2019 11:21:32 -0700
Message-Id: <20191030182132.25763-7-f.fainelli@gmail.com>
In-Reply-To: <20191030182132.25763-1-f.fainelli@gmail.com>
References: <20191030182132.25763-1-f.fainelli@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Since we do not have interrupts on BCM7216, we cannot have trip point
crossing, the thermal subsystem expects us to provide a NULL set_trips
operation in that case, so make it possible to provide per-process
thermal_zone_of_device_ops

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/thermal/broadcom/brcmstb_thermal.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 64f715053ce9..a75a335d1bb3 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -96,6 +96,7 @@ static struct avs_tmon_trip avs_tmon_trips[] = {
 struct brcmstb_thermal_params {
 	unsigned int offset;
 	unsigned int mult;
+	const struct thermal_zone_of_device_ops *of_ops;
 };
 
 struct brcmstb_thermal_priv {
@@ -278,19 +279,25 @@ static int brcmstb_set_trips(void *data, int low, int high)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops of_ops = {
+static const struct thermal_zone_of_device_ops brcmstb_16nm_of_ops = {
 	.get_temp	= brcmstb_get_temp,
-	.set_trips	= brcmstb_set_trips,
 };
 
 static const struct brcmstb_thermal_params brcmstb_16nm_params = {
 	.offset	= 457829,
 	.mult	= 557,
+	.of_ops	= &brcmstb_16nm_of_ops,
+};
+
+static const struct thermal_zone_of_device_ops brcmstb_28nm_of_ops = {
+	.get_temp	= brcmstb_get_temp,
+	.set_trips	= brcmstb_set_trips,
 };
 
 static const struct brcmstb_thermal_params brcmstb_28nm_params = {
 	.offset	= 410040,
 	.mult	= 487,
+	.of_ops	= &brcmstb_28nm_of_ops,
 };
 
 static const struct of_device_id brcmstb_thermal_id_table[] = {
@@ -329,7 +336,7 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, priv);
 
 	thermal = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
-						       &of_ops);
+						       priv->temp_params.of_ops);
 	if (IS_ERR(thermal)) {
 		ret = PTR_ERR(thermal);
 		dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
-- 
2.17.1