Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Thu, 31 Oct 2019 15:16:44 +0200
From:   Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc:     mchehab@kernel.org, robh+dt@kernel.org, sakari.ailus@iki.fi,
        linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        c.barrett@framos.com, a.brela@framos.com, peter.griffin@linaro.org
Subject: Re: [PATCH v4 0/2] Add IMX296 CMOS image sensor support
Message-ID: <20191031131644.GA8917@pendragon.ideasonboard.com>
References: <20191030094902.32582-1-manivannan.sadhasivam@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20191030094902.32582-1-manivannan.sadhasivam@linaro.org>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Mani,

Thank you for the patches.

On Wed, Oct 30, 2019 at 03:19:00PM +0530, Manivannan Sadhasivam wrote:
> Hello,
> 
> This patchset adds support for IMX296 CMOS image sensor from Sony.
> Sensor can be programmed through I2C and 4-wire interface but the
> current driver only supports I2C interface. The sensor is
> capable of outputting frames in CSI2 format (1 Lane). In the case
> of sensor resolution, driver only supports 1440x1088 at 30 FPS.
> 
> The driver has been validated using Framos IMX296 module interfaced to
> 96Boards Dragonboard410c.

I've just been made aware of your work. I also worked on an IMX296
sensor driver in parallel, which I will post to the list. My driver
doesn't hardcode the resolution but computes register values at runtime,
so I wonder if it could be a better option. I'll post it now.

> Changes in v4:
> 
> * Fixed issues related to gain settings and few misc cleanups in driver
> * Documented port node and removed maxItems, default prop from dt binding
>   as per the review
> 
> Changes in v3:
> 
> * Fixed the reference to video-interfaces.txt in binding.
> 
> Changes in v2:
> 
> * Switched to YAML binding
> 
> Manivannan Sadhasivam (2):
>   dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
>   media: i2c: Add IMX296 CMOS image sensor driver
> 
>  .../devicetree/bindings/media/i2c/imx296.yaml |  94 +++
>  MAINTAINERS                                   |   8 +
>  drivers/media/i2c/Kconfig                     |  11 +
>  drivers/media/i2c/Makefile                    |   1 +
>  drivers/media/i2c/imx296.c                    | 715 ++++++++++++++++++
>  5 files changed, 829 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
>  create mode 100644 drivers/media/i2c/imx296.c

-- 
Regards,

Laurent Pinchart