Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20191012200524.23512-1-alistair@alistair23.me>
 <20191016144946.p3tm67vh5lqigndn@gilmour> <CAGb2v67QrTJjSO99UNs-=3ZZnK948am11=izRTHT6gZ06E28eA@mail.gmail.com>
 <20191021111709.dpu6g7jltuw6cbbn@gilmour>
In-Reply-To: <20191021111709.dpu6g7jltuw6cbbn@gilmour>
From:   Alistair Francis <alistair23@gmail.com>
Date:   Tue, 5 Nov 2019 11:27:42 -0800
Message-ID: <CAKmqyKN8Ru19h3y=9O13=5wpys3BC2LQM65S+2QYjPdJQn2O4w@mail.gmail.com>
Subject: Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1,
 serial2 and serial3
To:     Maxime Ripard <mripard@kernel.org>
Cc:     Chen-Yu Tsai <wens@csie.org>,
        Alistair Francis <alistair@alistair23.me>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon, Oct 21, 2019 at 4:17 AM Maxime Ripard <mripard@kernel.org> wrote:
>
> Hi,
>
> On Wed, Oct 16, 2019 at 10:54:27PM +0800, Chen-Yu Tsai wrote:
> > On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel.org> wrote:
> > > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote:
> > > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial
> > > > connections.
> > > >
> > > > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > > > ---
> > > >  .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++
> > > >  1 file changed, 25 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> > > > index 124b0b030b28..49c37b21ab36 100644
> > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
> > > > @@ -56,6 +56,10 @@
> > > >       aliases {
> > > >               ethernet0 = &emac;
> > > >               serial0 = &uart0;
> > > > +             serial1 = &uart1;
> > > > +             serial2 = &uart2;
> > > > +             serial3 = &uart3;
> > > > +             serial4 = &uart4;
> > > >       };
> > > >
> > > >       chosen {
> > > > @@ -280,6 +284,27 @@
> > > >       };
> > > >  };
> > > >
> > > > +/* On Pi-2 connector */
> > > > +&uart2 {
> > > > +     pinctrl-names = "default";
> > > > +     pinctrl-0 = <&uart2_pins>;
> > > > +     status = "disabled";
> > > > +};
> > > > +
> > > > +/* On Euler connector */
> > > > +&uart3 {
> > > > +     pinctrl-names = "default";
> > > > +     pinctrl-0 = <&uart3_pins>;
> > > > +     status = "disabled";
> > > > +};
> > > > +
> > > > +/* On Euler connector, RTS/CTS optional */
> > > > +&uart4 {
> > > > +     pinctrl-names = "default";
> > > > +     pinctrl-0 = <&uart4_pins>;
> > > > +     status = "disabled";
> > > > +};
> > >
> > > Since these are all the default muxing, maybe we should just set that
> > > in the DTSI?
> >
> > Maybe not, since people may want to only use RX/TX, and leave the other
> > two pins for GPIO?
>
> Right, I'll apply that patch.

Ping, just want to make sure this has been applied/will be applied.

Alistair

>
> Thanks!
> Maxime