Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To:     Andrew Murray <andrew.murray@arm.com>, linux-pci@vger.kernel.org,
        devicetree@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com,
        linux-rpi-kernel@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Eric Anholt <eric@anholt.net>, Stefan Wahren <wahrenst@gmx.net>
Cc:     james.quinlan@broadcom.com, mbrugger@suse.com,
        f.fainelli@gmail.com, phil@raspberrypi.org,
        Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
        linux-kernel@vger.kernel.org
Subject: [PATCH 2/4] ARM: dts: bcm2711: Enable PCIe controller
Date:   Wed,  6 Nov 2019 22:45:24 +0100
Message-Id: <20191106214527.18736-3-nsaenzjulienne@suse.de>
In-Reply-To: <20191106214527.18736-1-nsaenzjulienne@suse.de>
References: <20191106214527.18736-1-nsaenzjulienne@suse.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This enables bcm2711's PCIe bus, wich is hardwired to a VIA Technologies
XHCI USB 3.0 controller.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 arch/arm/boot/dts/bcm2711.dtsi | 47 ++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index a9d84e28f245..c7b2e7b57da6 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -288,6 +288,53 @@
 		arm,cpu-registers-not-fw-configured;
 	};
 
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie_0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			msi-controller;
+			msi-parent = <&pcie_0>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			linux,pci-domain = <0>;
+			brcm,enable-ssc;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH
+					 0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH
+					 0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH
+					 0 0 0 4 &gicv2 GIC_SPI 146
+							IRQ_TYPE_LEVEL_HIGH>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory. As the bus DMA mask is rounded up to the
+			 * closest power of two of the dma-range size, we're
+			 * forced to set the limit at 2GB. This can be
+			 * harmlessly changed in the future once the DMA code
+			 * handles non power of two DMA limits.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0x80000000>;
+		};
+	};
+
 	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.23.0