Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Anson Huang <Anson.Huang@nxp.com>
To:     robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
        s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com,
        andrew.smirnov@gmail.com, manivannan.sadhasivam@linaro.org,
        marcel.ziswiler@toradex.com, sebastien.szymanski@armadeus.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Cc:     Linux-imx@nxp.com
Subject: [PATCH V2 2/4] ARM: dts: imx6sll-evk: Add eMMC support
Date:   Thu,  7 Nov 2019 10:06:31 +0800
Message-Id: <1573092393-26885-2-git-send-email-Anson.Huang@nxp.com>
In-Reply-To: <1573092393-26885-1-git-send-email-Anson.Huang@nxp.com>
References: <1573092393-26885-1-git-send-email-Anson.Huang@nxp.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

i.MX6SLL EVK board has eMMC connected on uSDHC2, add support
for it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes.
---
 arch/arm/boot/dts/imx6sll-evk.dts | 67 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 3e1d32f..29b284c 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -109,6 +109,14 @@
 		enable-active-high;
 	};
 
+	reg_sd2_vmmc: regulator-sd2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC-VCCQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
 	reg_sd3_vmmc: regulator-sd3-vmmc {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -314,6 +322,17 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	bus-width = <8>;
+	no-removable;
+	status = "okay";
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -403,6 +422,54 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x413059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130f9
+		>;
+	};
+
 	pinctrl_usbotg1: usbotg1grp {
 		fsl,pins = <
 			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
-- 
2.7.4