Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH] watchdog: aspeed: Fix clock behaviour for ast2600
To:     Joel Stanley <joel@jms.id.au>,
        Wim Van Sebroeck <wim@linux-watchdog.org>,
        linux-watchdog@vger.kernel.org
Cc:     Andrew Jeffery <andrew@aj.id.au>,
        Ryan Chen <ryan_chen@aspeedtech.com>,
        =?UTF-8?Q?C=c3=a9dric_Le_Goater?= <clg@kaod.org>,
        linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
References: <20191108032905.22463-1-joel@jms.id.au>
From:   Guenter Roeck <linux@roeck-us.net>
Message-ID: <74f32d61-856d-623f-2f37-965d9331aba0@roeck-us.net>
Date:   Fri, 8 Nov 2019 06:25:04 -0800
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
 Thunderbird/60.9.0
MIME-Version: 1.0
In-Reply-To: <20191108032905.22463-1-joel@jms.id.au>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 11/7/19 7:29 PM, Joel Stanley wrote:
> The ast2600 no longer uses bit 4 in the control register to indicate a
> 1MHz clock (It now controls weather this watchdog is reset by a SOC
> reset). This means we do not want to set it. It also does not need to be
> set for the ast2500, as it is read-only on that SoC.
> 
> The comment next to the clock rate selection wandered away from where it
> was set, so put it back next to the register setting it's describing.
> 
> Fixes: b3528b487448 ("watchdog: aspeed: Add support for AST2600")
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   drivers/watchdog/aspeed_wdt.c | 16 ++++++++++------
>   1 file changed, 10 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
> index 4ec0906bf12c..7e00960651fa 100644
> --- a/drivers/watchdog/aspeed_wdt.c
> +++ b/drivers/watchdog/aspeed_wdt.c
> @@ -258,11 +258,6 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
>   	if (IS_ERR(wdt->base))
>   		return PTR_ERR(wdt->base);
>   
> -	/*
> -	 * The ast2400 wdt can run at PCLK, or 1MHz. The ast2500 only
> -	 * runs at 1MHz. We chose to always run at 1MHz, as there's no
> -	 * good reason to have a faster watchdog counter.
> -	 */
>   	wdt->wdd.info = &aspeed_wdt_info;
>   	wdt->wdd.ops = &aspeed_wdt_ops;
>   	wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
> @@ -278,7 +273,16 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
>   		return -EINVAL;
>   	config = ofdid->data;
>   
> -	wdt->ctrl = WDT_CTRL_1MHZ_CLK;
> +	/*
> +	 * On clock rates:
> +	 *  - ast2400 wdt can run at PCLK, or 1MHz
> +	 *  - ast2500 only runs at 1MHz, hard coding bit 4 to 1
> +	 *  - ast2600 always runs at 1MHz
> +	 *
> +	 * Set the ast2400 to run at 1MHz as it simplifies the driver.
> +	 */
> +	if (of_device_is_compatible(np, "aspeed,ast2400-wdt"))
> +		wdt->ctrl = WDT_CTRL_1MHZ_CLK;
>   
>   	/*
>   	 * Control reset on a per-device basis to ensure the
>