Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20191105000129.GA6536@onstation.org> <CAF6AEGv3gs+LFOP3AGthXd4niFb_XYOuwLfEa2G9eb27b1wMMA@mail.gmail.com>
 <20191105100804.GA9492@onstation.org> <CAF6AEGtB+g=4eiB31jkyuBGW7r0TBSh2oMj6TGtSgQ=q1ZV1tg@mail.gmail.com>
 <20191106091335.GA16729@onstation.org> <CAF6AEGuEO1jg6KhOFWEMUjq4ZQy5w61dWJk6uLWRzHnMZYZv=g@mail.gmail.com>
 <CAOCk7NomH2MsZ+FvPFAMWeabOFpyOwODCb_Ro07v+2k2v_C4NA@mail.gmail.com>
 <CAF6AEGsZkJJTNZ8SzHsSioEnkpekr1Texu5_EeBW1hP-bsOyjQ@mail.gmail.com>
 <20191107111019.GA24028@onstation.org> <CAF6AEGtbP=X2+DELajQq9zMZYGgmhyUhe62ncvHvyFnyZexTXg@mail.gmail.com>
 <CAOCk7NrPdGqc4vo70NmTuyszkPaPe41-e89ym2vAYBY+GTt9BA@mail.gmail.com> <CAJs_Fx4UJYd-k3_3AAGJo-8udThhvf6t-J=OZi3jappWjTNnFQ@mail.gmail.com>
In-Reply-To: <CAJs_Fx4UJYd-k3_3AAGJo-8udThhvf6t-J=OZi3jappWjTNnFQ@mail.gmail.com>
From:   Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Date:   Fri, 8 Nov 2019 07:56:25 -0700
Message-ID: <CAOCk7Nq7rPmraofy+o8vWTwSAd1+dTRsoZ4QN0mRAOOz7u7TUg@mail.gmail.com>
Subject: Re: [Freedreno] drm/msm: 'pp done time out' errors after async commit changes
To:     Rob Clark <robdclark@chromium.org>
Cc:     Rob Clark <robdclark@gmail.com>,
        Brian Masney <masneyb@onstation.org>,
        freedreno <freedreno@lists.freedesktop.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        dri-devel <dri-devel@lists.freedesktop.org>,
        linux-arm-msm <linux-arm-msm@vger.kernel.org>,
        Sean Paul <sean@poorly.run>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, Nov 7, 2019 at 7:03 PM Rob Clark <robdclark@chromium.org> wrote:
>
> On Thu, Nov 7, 2019 at 9:40 AM Jeffrey Hugo <jeffrey.l.hugo@gmail.com> wrote:
> >
> > On Thu, Nov 7, 2019 at 9:17 AM Rob Clark <robdclark@gmail.com> wrote:
> > >
> > > On Thu, Nov 7, 2019 at 3:10 AM Brian Masney <masneyb@onstation.org> wrote:
> > > >
> > > > On Wed, Nov 06, 2019 at 08:58:59AM -0800, Rob Clark wrote:
> > > > > On Wed, Nov 6, 2019 at 8:47 AM Jeffrey Hugo <jeffrey.l.hugo@gmail.com> wrote:
> > > > > >
> > > > > > On Wed, Nov 6, 2019 at 9:30 AM Rob Clark <robdclark@gmail.com> wrote:
> > > > > > >
> > > > > > > On Wed, Nov 6, 2019 at 1:13 AM Brian Masney <masneyb@onstation.org> wrote:
> > > > > > > >
> > > > > > > > On Tue, Nov 05, 2019 at 08:23:27AM -0800, Rob Clark wrote:
> > > > > > > > > On Tue, Nov 5, 2019 at 2:08 AM Brian Masney <masneyb@onstation.org> wrote:
> > > > > > > > > > The 'pp done time out' errors go away if I revert the following three
> > > > > > > > > > commits:
> > > > > > > > > >
> > > > > > > > > > cd6d923167b1 ("drm/msm/dpu: async commit support")
> > > > > > > > > > d934a712c5e6 ("drm/msm: add atomic traces")
> > > > > > > > > > 2d99ced787e3 ("drm/msm: async commit support")
> > > > > > > > > >
> > > > > > > > > > I reverted the first one to fix a compiler error, and the second one so
> > > > > > > > > > that the last patch can be reverted without any merge conflicts.
> > > > > > > > > >
> > > > > > > > > > I see that crtc_flush() calls mdp5_ctl_commit(). I tried to use
> > > > > > > > > > crtc_flush_all() in mdp5_flush_commit() and the contents of the frame
> > > > > > > > > > buffer dance around the screen like its out of sync. I renamed
> > > > > > > > > > crtc_flush_all() to mdp5_crtc_flush_all() and removed the static
> > > > > > > > > > declaration. Here's the relevant part of what I tried:
> > > > > > > > > >
> > > > > > > > > > --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
> > > > > > > > > > +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c
> > > > > > > > > > @@ -171,7 +171,15 @@ static void mdp5_prepare_commit(struct msm_kms *kms, struct drm_atomic_state *st
> > > > > > > > > >
> > > > > > > > > >  static void mdp5_flush_commit(struct msm_kms *kms, unsigned crtc_mask)
> > > > > > > > > >  {
> > > > > > > > > > -       /* TODO */
> > > > > > > > > > +       struct mdp5_kms *mdp5_kms = to_mdp5_kms(to_mdp_kms(kms));
> > > > > > > > > > +       struct drm_crtc *crtc;
> > > > > > > > > > +
> > > > > > > > > > +       for_each_crtc_mask(mdp5_kms->dev, crtc, crtc_mask) {
> > > > > > > > > > +               if (!crtc->state->active)
> > > > > > > > > > +                       continue;
> > > > > > > > > > +
> > > > > > > > > > +               mdp5_crtc_flush_all(crtc);
> > > > > > > > > > +       }
> > > > > > > > > >  }
> > > > > > > > > >
> > > > > > > > > > Any tips would be appreciated.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > I think this is along the lines of what we need to enable async commit
> > > > > > > > > for mdp5 (but also removing the flush from the atomic-commit path)..
> > > > > > > > > the principle behind the async commit is to do all the atomic state
> > > > > > > > > commit normally, but defer writing the flush bits.  This way, if you
> > > > > > > > > get another async update before the next vblank, you just apply it
> > > > > > > > > immediately instead of waiting for vblank.
> > > > > > > > >
> > > > > > > > > But I guess you are on a command mode panel, if I remember?  Which is
> > > > > > > > > a case I didn't have a way to test.  And I'm not entirely about how
> > > > > > > > > kms_funcs->vsync_time() should be implemented for cmd mode panels.
> > > > > > > >
> > > > > > > > Yes, this is a command-mode panel and there's no hardware frame counter
> > > > > > > > available. The key to getting the display working on this phone was this
> > > > > > > > patch:
> > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2bab52af6fe68c43b327a57e5ce5fc10eefdfadf
> > > > > > > >
> > > > > > > > > That all said, I think we should first fix what is broken, before
> > > > > > > > > worrying about extending async commit support to mdp5.. which
> > > > > > > > > shouldn't hit the async==true path, due to not implementing
> > > > > > > > > kms_funcs->vsync_time().
> > > > > > > > >
> > > > > > > > > What I think is going on is that, in the cmd mode case,
> > > > > > > > > mdp5_wait_flush() (indirectly) calls mdp5_crtc_wait_for_pp_done(),
> > > > > > > > > which waits for a pp-done irq regardless of whether there is a flush
> > > > > > > > > in progress.  Since there is no flush pending, the irq never comes.
> > > > > > > > > But the expectation is that kms_funcs->wait_flush() returns
> > > > > > > > > immediately if there is nothing to wait for.
> > > > > > > >
> > > > > > > > I don't think that's happening in this case. I added some pr_info()
> > > > > > > > statements to request_pp_done_pending() and mdp5_crtc_pp_done_irq().
> > > > > > > > Here's the first two sets of messages that appear in dmesg:
> > > > > > > >
> > > > > > > > [   14.018907] msm fd900000.mdss: pp done time out, lm=0
> > > > > > > > [   14.018993] request_pp_done_pending: HERE
> > > > > > > > [   14.074208] mdp5_crtc_pp_done_irq: HERE
> > > > > > > > [   14.074368] Console: switching to colour frame buffer device 135x120
> > > > > > > > [   14.138938] msm fd900000.mdss: pp done time out, lm=0
> > > > > > > > [   14.139021] request_pp_done_pending: HERE
> > > > > > > > [   14.158097] mdp5_crtc_pp_done_irq: HERE
> > > > > > > >
> > > > > > > > The messages go on like this with the same pattern.
> > > > > > > >
> > > > > > > > I tried two different changes:
> > > > > > > >
> > > > > > > > 1) I moved the request_pp_done_pending() and corresponding if statement
> > > > > > > >    from mdp5_crtc_atomic_flush() and into mdp5_crtc_atomic_begin().
> > > > > > > >
> > > > > > > > 2) I increased the timeout in wait_for_completion_timeout() by several
> > > > > > > >    increments; all the way to 5 seconds.
> > > > > > >
> > > > > > > increasing the timeout won't help, because the pp-done irq has already
> > > > > > > come at the point where we wait for it..
> > > > > > >
> > > > > > > maybe the easy thing is just add mdp5_crtc->needs_pp, set to true
> > > > > > > before requesting, and false when we get the irq.. and then
> > > > > > > mdp5_crtc_wait_for_pp_done() just returns if needs_pp==false..
> > > > > >
> > > > > > On the otherhand, what about trying to make command mode panels
> > > > > > resemble video mode panels slightly?  Video mode panels have a vsync
> > > > > > counter in hardware, which is missing from command mode - however it
> > > > > > seems like the driver/drm framework would prefer such a counter.
> > > > > > Would it be a reasonable idea to make a software counter, and just
> > > > > > increment it every time the pp_done irq is triggered?
> > > > > >
> > > > > > I'm just thinking that we'll avoid issues long term by trying to make
> > > > > > the code common, rather than diverging it for the two modes.
> > > > > >
> > > > >
> > > > > *possibly*, but I think we want to account somehow periods where
> > > > > display is not updated.
> > > > >
> > > > > fwiw, it isn't that uncommon for userspace to use vblanks to "keep
> > > > > time" (drive animations for desktop switch, window
> > > > > maximize/unmaximize, etc).. it could be a surprise when "vblank" is
> > > > > not periodic.
> > > >
> > > > What do you think about using some variation of the current value of
> > > > jiffies in the kernel + the number of pp_done IRQs as the software
> > > > counter for command-mode panels?
> > > >
> > >
> > > jiffies is probably too coarse.. but we could use monotonic clock, I guess.
> > >
> > > But I suppose even a cmd mode panel has a "vblank", it is just
> > > internal the panel.  Do we get the TE interrupt at regular intervals?
> > > AFAIU this would be tied to the panel's internal vblank.
> >
> > The TE interrupt was first implemented in MDP 1.7.0 (msm8996).  8974
> > predates that.
> > You can get it from the WR_PTR interrupt, but you have to understand
> > details about your panel to configure that correctly.
>
> oh, sad.. I kinda assumed it was a pretty common DSI irq since
> forever.. I guess the hw is just managing the flow control to prevent
> tearing?
>
> Well, anyways, I guess we could just use a free-running timer based on
> refresh rate of the panel?

That would work.  One more alternative (just want to make sure we've
evaluated all options) is to use the autorefresh feature.  How I would
put it simply, is that autorefresh turns a command mode panel into a
video mode panel.  If autorefresh is enabled, the MDP will
automatically send a frame to the panel every time the panel invokes
the TE signal.  I'm pretty sure this will automatically trigger the
PP_DONE irq, so essentially PP_DONE is now analogous to vsync.  The
downside is that the START trigger and autorefresh are basically
mutually exclusive.  I see the autorefresh config register in MDP 1.0,
so it would be applicable to all platforms supported by the mdp5
driver.