Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; 
  s=zapps768; d=zoho.com; 
  h=from:to:cc:subject:date:message-id:in-reply-to:references; 
  b=a168bAp67ccaHG+qm75dhpXszt8mBEDcQfrq/98xLnS/rG6J2dDHtaYKvHjYMHQKTFKRlIKA//sv
    I6r6NDiZipT3vbYzPV8LJ2yHif2Cxd75zs7APa2V/7gtuAhDk0xM  
From:   Zhou Yanjie <zhouyanjie@zoho.com>
To:     linux-mips@vger.kernel.org
Cc:     linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
        devicetree@vger.kernel.org, mturquette@baylibre.com,
        paul.burton@mips.com, sboyd@kernel.org, robh+dt@kernel.org,
        syq@debian.org, mark.rutland@arm.com, paul@crapouillou.net
Subject: [PATCH 2/2 v3] clk: Ingenic: Add CGU driver for X1000.
Date:   Sun, 10 Nov 2019 17:28:22 +0800
Message-Id: <1573378102-72380-3-git-send-email-zhouyanjie@zoho.com>
In-Reply-To: <1573378102-72380-1-git-send-email-zhouyanjie@zoho.com>
References: <1571421006-12771-1-git-send-email-zhouyanjie@zoho.com>
 <1573378102-72380-1-git-send-email-zhouyanjie@zoho.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add support for the clocks provided by the CGU in the Ingenic X1000
SoC, making use of the cgu code to do the heavy lifting.

Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
---
 drivers/clk/ingenic/Kconfig     |  10 ++
 drivers/clk/ingenic/Makefile    |   1 +
 drivers/clk/ingenic/x1000-cgu.c | 274 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 285 insertions(+)
 create mode 100644 drivers/clk/ingenic/x1000-cgu.c

diff --git a/drivers/clk/ingenic/Kconfig b/drivers/clk/ingenic/Kconfig
index 1cb4899..fb7b399 100644
--- a/drivers/clk/ingenic/Kconfig
+++ b/drivers/clk/ingenic/Kconfig
@@ -45,6 +45,16 @@ config INGENIC_CGU_JZ4780
 
 	  If building for a JZ4780 SoC, you want to say Y here.
 
+config INGENIC_CGU_X1000
+	bool "Ingenic X1000 CGU driver"
+	default MACH_X1000
+	select INGENIC_CGU_COMMON
+	help
+	  Support the clocks provided by the CGU hardware on Ingenic X1000
+	  and compatible SoCs.
+
+	  If building for a X1000 SoC, you want to say Y here.
+
 config INGENIC_TCU_CLK
 	bool "Ingenic JZ47xx TCU clocks driver"
 	default MACH_INGENIC
diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index 097220b..8b1dad9 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -4,4 +4,5 @@ obj-$(CONFIG_INGENIC_CGU_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4725B)	+= jz4725b-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4780)	+= jz4780-cgu.o
+obj-$(CONFIG_INGENIC_CGU_X1000)		+= x1000-cgu.o
 obj-$(CONFIG_INGENIC_TCU_CLK)		+= tcu.o
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
new file mode 100644
index 00000000..b22d87b
--- /dev/null
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * X1000 SoC CGU driver
+ * Copyright (c) 2019 Zhou Yanjie <zhouyanjie@zoho.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/clock/x1000-cgu.h>
+#include "cgu.h"
+#include "pm.h"
+
+/* CGU register offsets */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_APLL		0x10
+#define CGU_REG_MPLL		0x14
+#define CGU_REG_CLKGR		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_DDRCDR		0x2c
+#define CGU_REG_MACCDR		0x54
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSC0CDR		0x68
+#define CGU_REG_I2SCDR1		0x70
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_PCMCDR		0x84
+#define CGU_REG_MSC1CDR		0xa4
+#define CGU_REG_CMP_INTR	0xb0
+#define CGU_REG_CMP_INTRE	0xb4
+#define CGU_REG_DRCG		0xd0
+#define CGU_REG_CPCSR		0xd4
+#define CGU_REG_PCMCDR1		0xe0
+#define CGU_REG_MACPHYC		0xe8
+
+/* bits within the OPCR register */
+#define OPCR_SPENDN0		BIT(7)
+#define OPCR_SPENDN1		BIT(6)
+
+static struct ingenic_cgu *cgu;
+
+static const s8 pll_od_encoding[8] = {
+	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
+};
+
+static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[X1000_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
+	[X1000_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[X1000_CLK_APLL] = {
+		"apll", CGU_CLK_PLL,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_APLL,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 9,
+			.enable_bit = 8,
+			.stable_bit = 10,
+		},
+	},
+
+	[X1000_CLK_MPLL] = {
+		"mpll", CGU_CLK_PLL,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.pll = {
+			.reg = CGU_REG_MPLL,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 6,
+			.enable_bit = 7,
+			.stable_bit = 0,
+		},
+	},
+
+	/* Muxes & dividers */
+
+	[X1000_CLK_SCLKA] = {
+		"sclk_a", CGU_CLK_MUX,
+		.parents = { -1, X1000_CLK_EXCLK, X1000_CLK_APLL, -1 },
+		.mux = { CGU_REG_CPCCR, 30, 2 },
+	},
+
+	[X1000_CLK_CPUMUX] = {
+		"cpu_mux", CGU_CLK_MUX,
+		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 28, 2 },
+	},
+
+	[X1000_CLK_CPU] = {
+		"cpu", CGU_CLK_DIV,
+		.parents = { X1000_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+	},
+
+	[X1000_CLK_L2CACHE] = {
+		"l2cache", CGU_CLK_DIV,
+		.parents = { X1000_CLK_CPUMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+	},
+
+	[X1000_CLK_AHB0] = {
+		"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 26, 2 },
+		.div = { CGU_REG_CPCCR, 8, 1, 4, 21, -1, -1 },
+	},
+
+	[X1000_CLK_AHB2PMUX] = {
+		"ahb2_apb_mux", CGU_CLK_MUX,
+		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
+		.mux = { CGU_REG_CPCCR, 24, 2 },
+	},
+
+	[X1000_CLK_AHB2] = {
+		"ahb2", CGU_CLK_DIV,
+		.parents = { X1000_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 12, 1, 4, 20, -1, -1 },
+	},
+
+	[X1000_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV,
+		.parents = { X1000_CLK_AHB2PMUX, -1, -1, -1 },
+		.div = { CGU_REG_CPCCR, 16, 1, 4, 20, -1, -1 },
+	},
+
+	[X1000_CLK_DDR] = {
+		"ddr", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { -1, X1000_CLK_SCLKA, X1000_CLK_MPLL, -1 },
+		.mux = { CGU_REG_DDRCDR, 30, 2 },
+		.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR, 31 },
+	},
+
+	[X1000_CLK_MAC] = {
+		"mac", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL},
+		.mux = { CGU_REG_MACCDR, 31, 1 },
+		.div = { CGU_REG_MACCDR, 0, 1, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR, 25 },
+	},
+
+	[X1000_CLK_MSCMUX] = {
+		"msc_mux", CGU_CLK_MUX,
+		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL},
+		.mux = { CGU_REG_MSC0CDR, 31, 1 },
+	},
+
+	[X1000_CLK_MSC0] = {
+		"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1000_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR, 4 },
+	},
+
+	[X1000_CLK_MSC1] = {
+		"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { X1000_CLK_MSCMUX, -1, -1, -1 },
+		.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
+		.gate = { CGU_REG_CLKGR, 5 },
+	},
+
+	[X1000_CLK_SSIPLL] = {
+		"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
+		.parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
+		.mux = { CGU_REG_SSICDR, 31, 1 },
+		.div = { CGU_REG_SSICDR, 0, 1, 8, 29, 28, 27 },
+	},
+
+	[X1000_CLK_SSIMUX] = {
+		"ssi_mux", CGU_CLK_MUX,
+		.parents = { X1000_CLK_EXCLK, X1000_CLK_SSIPLL, -1, -1 },
+		.mux = { CGU_REG_SSICDR, 30, 1 },
+	},
+
+	/* Gate-only clocks */
+
+	[X1000_CLK_SFC] = {
+		"sfc", CGU_CLK_GATE,
+		.parents = { X1000_CLK_SSIPLL, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 2 },
+	},
+
+	[X1000_CLK_I2C0] = {
+		"i2c0", CGU_CLK_GATE,
+		.parents = { X1000_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 7 },
+	},
+
+	[X1000_CLK_I2C1] = {
+		"i2c1", CGU_CLK_GATE,
+		.parents = { X1000_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 8 },
+	},
+
+	[X1000_CLK_I2C2] = {
+		"i2c2", CGU_CLK_GATE,
+		.parents = { X1000_CLK_PCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 9 },
+	},
+
+	[X1000_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 14 },
+	},
+
+	[X1000_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 15 },
+	},
+
+	[X1000_CLK_UART2] = {
+		"uart2", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 16 },
+	},
+
+	[X1000_CLK_SSI] = {
+		"ssi", CGU_CLK_GATE,
+		.parents = { X1000_CLK_SSIMUX, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 19 },
+	},
+
+	[X1000_CLK_PDMA] = {
+		"pdma", CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 21 },
+	},
+};
+
+static void __init x1000_cgu_init(struct device_node *np)
+{
+	int retval;
+
+	cgu = ingenic_cgu_new(x1000_cgu_clocks,
+			      ARRAY_SIZE(x1000_cgu_clocks), np);
+	if (!cgu) {
+		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval) {
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+		return;
+	}
+
+	ingenic_cgu_register_syscore_ops(cgu);
+}
+CLK_OF_DECLARE(x1000_cgu, "ingenic,x1000-cgu", x1000_cgu_init);
-- 
2.7.4