Received: by 2002:a25:31c3:0:0:0:0:0 with SMTP id x186csp4879966ybx; Sun, 10 Nov 2019 02:43:57 -0800 (PST) X-Google-Smtp-Source: APXvYqy06wg54bqUziISEp6YbKpQkqaco3fCXdUj2K8K3ITx3poeZIelY5Z/WgtfuWKILcF+aT6k X-Received: by 2002:a17:906:5a83:: with SMTP id l3mr17717096ejq.194.1573382637343; Sun, 10 Nov 2019 02:43:57 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1573382637; cv=none; d=google.com; s=arc-20160816; b=L0usK0eYs1WYv0gou8NBSGzcwrBQtlIqMx2Bn4kdFdn5/3Ou8MDswX1pmDQjGuAqPZ oAhb5vtvUsDMdmdBuoR+nTBKI+ZOkg3oxEQh7o1P3ah9LDfmQiy2abMncdai6Szkxch9 0H4+ezxi4BoZCNyh4GF3whVtLKYecU43MnHU6Z+ma6h4yqkgE02wMeL8QM5ljWGo8GLK QZx9rqg76ifSu1GmNcL+aMaWd5qPMCfgAc8lhGdM9fDspiPiZRSYdvFyTUjMROXdmoqE 8m0UZcfvHdG9cEsSFsahn2YFngvlmW4DPNF9e3tqyMKeghsP2Ib9q0yBqLcH68WDFxrJ Avag== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:subject:cc:to:from:date :dkim-signature; bh=S7iZi+H+OZjHyEyErN0OfFjG4/C1HyMRvQqNwxmuK5g=; b=JPJqIvTBubHtiGMEp7zs9PUFWyDNTdqPJQJUNaQEnNlAEFjjz2xHNtrw3YZKehoCTf FJTpOS4KrPweJjgr+jg/2vJyJG3ohJYuIEbGnaSe+SdsD+iZNFsXw6GVyPXaNUqGcBtr UacyErcmzBDlbO1bVKZq3vZ+K8rC1iKfsPelf5UmaHjbJdaM5yRXY3GgBx65iMbtHVmi aKoAeYGXETQSOVSRUQaCttsmld30ZoZesiK2/aflffC/jFa5ElGrQMXxY7S7s0MOScII xo9GNmBemf3WfAm4Ziwf22cuE2Scm9fe3aZAIkcawn5QxHypW+9FhLpfMFqKZ9/xZKGE lSjg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=bsXnj+fe; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id h11si9344864edf.93.2019.11.10.02.43.34; Sun, 10 Nov 2019 02:43:57 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=bsXnj+fe; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726785AbfKJKmA (ORCPT + 99 others); Sun, 10 Nov 2019 05:42:00 -0500 Received: from mail.kernel.org ([198.145.29.99]:56024 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726609AbfKJKmA (ORCPT ); Sun, 10 Nov 2019 05:42:00 -0500 Received: from archlinux (cpc149474-cmbg20-2-0-cust94.5-4.cable.virginm.net [82.4.196.95]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 093A320869; Sun, 10 Nov 2019 10:41:55 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1573382518; bh=3MvNvn8MfhO+XDxpH/RZCidHBDmuqYG3o8YCmtmTv4o=; h=Date:From:To:Cc:Subject:In-Reply-To:References:From; b=bsXnj+fekPVwXJgYIBzY0nZoaH6h0nfgPzzgyaPhRtUI+UDvhluZdd7FdUnwcBh+j rVVYBMTVjArfYYYxZbjcSoZaZaPfZEhodEqk+0hUZICneWyCJ2i7uCE/5RCs4RQjMc EppD2ZmYRguQGyQmu+rj6nA8WD+Kzph/XIxzqxSo= Date: Sun, 10 Nov 2019 10:41:53 +0000 From: Jonathan Cameron To: Rishi Gupta Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, gregkh@linuxfoundation.org, tglx@linutronix.de, allison@lohutok.net, alexios.zavras@intel.com, angus@akkea.ca, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org Subject: Re: [PATCH v6 1/3] iio: light: add driver for veml6030 ambient light sensor Message-ID: <20191110104153.783e8ee2@archlinux> In-Reply-To: <1572881904-15274-1-git-send-email-gupt21@gmail.com> References: <1572881904-15274-1-git-send-email-gupt21@gmail.com> X-Mailer: Claws Mail 3.17.4 (GTK+ 2.24.32; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 4 Nov 2019 21:08:24 +0530 Rishi Gupta wrote: > veml6030 is an ambient light sensor from Vishay semiconductors. > It has 16-bit resolution, supports both ambient light measurement > and white channel which is more responsive to wider wavelength > spectrum. It has flexible power saving, integration time and > gain options. Communication with host is over I2C. > > Signed-off-by: Rishi Gupta One minor thing inline. I'll fix it up whilst applying but please take a quick look at the result and check I haven't messed it up! Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > Changes in v6: > * Move devm_add_action_or_reset() after veml6030_hw_init() > * Reading/Writing/Show for period now takes values in seconds > > Changes in v5: > * Removed setting val2 when returning IIO_VAL_INT > * Removed redundant return from veml6030_read_raw() > * Set 4000 as min time in usleep_range(4000, 4002) > * Removed PSM support completely > > Changes in v4: > * None > > Changes in v3: > * Added appnote link in topmost comments section > * Dropped 'return ret' statements wherever not needed > * Removed .scan_index from channel specifications, not needed > * If irq is not enabled, events interfaces are not exposed now > * Return IRQ_NONE for spurious interrupt > * Removed CONFIG_PM, added __maybe_unused in power routines > * Removed of_match_ptr when specifying DT device id to match > * Corrected & documented sequence in veml6030_write_interrupt_config() > * Removed veml6030_remove() & added devm_add_action_or_reset functionality > * Added support to read integration time, gain, thresholds, period > * Removed including mutex.h not needed > * Set 100 ms integration & 1/8 gain during probe for better accuracy > * Used IIO_CONST_ATTR to create sysfs entries "_available" > * Minor cosmetics like everything in lower case > > Changes in v2: > * Added comma after CH_WHITE in enum veml6030_chan so it can be extended > * Removed .scan_type as driver doesn't use buffered mode > * Removed iio_device_unregister() as kernel will take care of cleaning > > drivers/iio/light/Kconfig | 11 + > drivers/iio/light/Makefile | 1 + > drivers/iio/light/veml6030.c | 911 +++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 923 insertions(+) > create mode 100644 drivers/iio/light/veml6030.c > > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > index 4a1a883..f9d27ef 100644 > --- a/drivers/iio/light/Kconfig > +++ b/drivers/iio/light/Kconfig > @@ -496,6 +496,17 @@ config VCNL4035 > To compile this driver as a module, choose M here: the > module will be called vcnl4035. > > +config VEML6030 > + tristate "VEML6030 ambient light sensor" > + select REGMAP_I2C > + depends on I2C > + help > + Say Y here if you want to build a driver for the Vishay VEML6030 > + ambient light sensor (ALS). > + > + To compile this driver as a module, choose M here: the > + module will be called veml6030. > + > config VEML6070 > tristate "VEML6070 UV A light sensor" > depends on I2C > diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile > index 00d1f9b..5e0c40b 100644 > --- a/drivers/iio/light/Makefile > +++ b/drivers/iio/light/Makefile > @@ -48,6 +48,7 @@ obj-$(CONFIG_TSL4531) += tsl4531.o > obj-$(CONFIG_US5182D) += us5182d.o > obj-$(CONFIG_VCNL4000) += vcnl4000.o > obj-$(CONFIG_VCNL4035) += vcnl4035.o > +obj-$(CONFIG_VEML6030) += veml6030.o > obj-$(CONFIG_VEML6070) += veml6070.o > obj-$(CONFIG_VL6180) += vl6180.o > obj-$(CONFIG_ZOPT2201) += zopt2201.o > diff --git a/drivers/iio/light/veml6030.c b/drivers/iio/light/veml6030.c > new file mode 100644 > index 0000000..a38b110 > --- /dev/null > +++ b/drivers/iio/light/veml6030.c > @@ -0,0 +1,911 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * VEML6030 Ambient Light Sensor > + * > + * Copyright (c) 2019, Rishi Gupta > + * > + * Datasheet: https://www.vishay.com/docs/84366/veml6030.pdf > + * Appnote-84367: https://www.vishay.com/docs/84367/designingveml6030.pdf > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* Device registers */ > +#define VEML6030_REG_ALS_CONF 0x00 > +#define VEML6030_REG_ALS_WH 0x01 > +#define VEML6030_REG_ALS_WL 0x02 > +#define VEML6030_REG_ALS_PSM 0x03 > +#define VEML6030_REG_ALS_DATA 0x04 > +#define VEML6030_REG_WH_DATA 0x05 > +#define VEML6030_REG_ALS_INT 0x06 > + > +/* Bit masks for specific functionality */ > +#define VEML6030_ALS_IT GENMASK(9, 6) > +#define VEML6030_PSM GENMASK(2, 1) > +#define VEML6030_ALS_PERS GENMASK(5, 4) > +#define VEML6030_ALS_GAIN GENMASK(12, 11) > +#define VEML6030_PSM_EN BIT(0) > +#define VEML6030_INT_TH_LOW BIT(15) > +#define VEML6030_INT_TH_HIGH BIT(14) > +#define VEML6030_ALS_INT_EN BIT(1) > +#define VEML6030_ALS_SD BIT(0) > + > +/* > + * The resolution depends on both gain and integration time. The > + * cur_resolution stores one of the resolution mentioned in the > + * table during startup and gets updated whenever integration time > + * or gain is changed. > + * > + * Table 'resolution and maximum detection range' in appnote 84367 > + * is visualized as a 2D array. The cur_gain stores index of gain > + * in this table (0-3) while the cur_integration_time holds index > + * of integration time (0-5). > + */ > +struct veml6030_data { > + struct i2c_client *client; > + struct regmap *regmap; > + int cur_resolution; > + int cur_gain; > + int cur_integration_time; > +}; > + > +/* Integration time available in seconds */ > +static IIO_CONST_ATTR(in_illuminance_integration_time_available, > + "0.025 0.05 0.1 0.2 0.4 0.8"); > + > +/* > + * Scale is 1/gain. Value 0.125 is ALS gain x (1/8), 0.25 is > + * ALS gain x (1/4), 1.0 = ALS gain x 1 and 2.0 is ALS gain x 2. > + */ > +static IIO_CONST_ATTR(in_illuminance_scale_available, > + "0.125 0.25 1.0 2.0"); > + > +static struct attribute *veml6030_attributes[] = { > + &iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr, > + &iio_const_attr_in_illuminance_scale_available.dev_attr.attr, > + NULL > +}; > + > +static const struct attribute_group veml6030_attr_group = { > + .attrs = veml6030_attributes, > +}; > + > +/* > + * Persistence = 1/2/4/8 x integration time > + * Minimum time for which light readings must stay above configured > + * threshold to assert the interrupt. > + */ > +static const char * const period_values[] = { > + "0.1 0.2 0.4 0.8", > + "0.2 0.4 0.8 1.6", > + "0.4 0.8 1.6 3.2", > + "0.8 1.6 3.2 6.4", > + "0.05 0.1 0.2 0.4", > + "0.025 0.050 0.1 0.2" > +}; > + > +/* > + * Return list of valid period values in seconds corresponding to > + * the currently active integration time. > + */ > +static ssize_t in_illuminance_period_available_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + int ret, reg, x; > + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); > + if (ret) { > + dev_err(&data->client->dev, > + "can't read als conf register %d\n", ret); > + return ret; > + } > + > + ret = ((reg >> 6) & 0xF); > + switch (ret) { > + case 0: > + case 1: > + case 2: > + case 3: > + x = ret; > + break; > + case 8: > + x = 4; > + break; > + case 12: > + x = 5; > + break; > + default: > + return -EINVAL; > + } > + > + return snprintf(buf, PAGE_SIZE, "%s\n", period_values[x]); > +} > + > +static IIO_DEVICE_ATTR_RO(in_illuminance_period_available, 0); > + > +static struct attribute *veml6030_event_attributes[] = { > + &iio_dev_attr_in_illuminance_period_available.dev_attr.attr, > + NULL > +}; > + > +static const struct attribute_group veml6030_event_attr_group = { > + .attrs = veml6030_event_attributes, > +}; > + > +static int veml6030_als_pwr_on(struct veml6030_data *data) > +{ > + return regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, > + VEML6030_ALS_SD, 0); > +} > + > +static int veml6030_als_shut_down(struct veml6030_data *data) > +{ > + return regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, > + VEML6030_ALS_SD, 1); > +} > + > +static void veml6030_als_shut_down_action(void *data) > +{ > + veml6030_als_shut_down(data); > +} > + > +static const struct iio_event_spec veml6030_event_spec[] = { > + { > + .type = IIO_EV_TYPE_THRESH, > + .dir = IIO_EV_DIR_RISING, > + .mask_separate = BIT(IIO_EV_INFO_VALUE), > + }, { > + .type = IIO_EV_TYPE_THRESH, > + .dir = IIO_EV_DIR_FALLING, > + .mask_separate = BIT(IIO_EV_INFO_VALUE), > + }, { > + .type = IIO_EV_TYPE_THRESH, > + .dir = IIO_EV_DIR_EITHER, > + .mask_separate = BIT(IIO_EV_INFO_PERIOD), > + }, { > + .type = IIO_EV_TYPE_THRESH, > + .dir = IIO_EV_DIR_EITHER, > + .mask_separate = BIT(IIO_EV_INFO_ENABLE), These last two should be one entry. I'll fix that up but please run a quick test in case I'm missing anything. > + }, > +}; > + > +/* Channel number */ > +enum veml6030_chan { > + CH_ALS, > + CH_WHITE, > +}; > + > +static const struct iio_chan_spec veml6030_channels[] = { > + { > + .type = IIO_LIGHT, > + .channel = CH_ALS, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_PROCESSED) | > + BIT(IIO_CHAN_INFO_INT_TIME) | > + BIT(IIO_CHAN_INFO_SCALE), > + .event_spec = veml6030_event_spec, > + .num_event_specs = ARRAY_SIZE(veml6030_event_spec), > + }, > + { > + .type = IIO_INTENSITY, > + .channel = CH_WHITE, > + .modified = 1, > + .channel2 = IIO_MOD_LIGHT_BOTH, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_PROCESSED), > + }, > +}; > + > +static const struct regmap_config veml6030_regmap_config = { > + .name = "veml6030_regmap", > + .reg_bits = 8, > + .val_bits = 16, > + .max_register = VEML6030_REG_ALS_INT, > + .val_format_endian = REGMAP_ENDIAN_LITTLE, > +}; > + > +static int veml6030_get_intgrn_tm(struct iio_dev *indio_dev, > + int *val, int *val2) > +{ > + int ret, reg; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); > + if (ret) { > + dev_err(&data->client->dev, > + "can't read als conf register %d\n", ret); > + return ret; > + } > + > + switch ((reg >> 6) & 0xF) { > + case 0: > + *val2 = 100000; > + break; > + case 1: > + *val2 = 200000; > + break; > + case 2: > + *val2 = 400000; > + break; > + case 3: > + *val2 = 800000; > + break; > + case 8: > + *val2 = 50000; > + break; > + case 12: > + *val2 = 25000; > + break; > + default: > + return -EINVAL; > + } > + > + *val = 0; > + return IIO_VAL_INT_PLUS_MICRO; > +} > + > +static int veml6030_set_intgrn_tm(struct iio_dev *indio_dev, > + int val, int val2) > +{ > + int ret, new_int_time, int_idx; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + if (val) > + return -EINVAL; > + > + switch (val2) { > + case 25000: > + new_int_time = 0x300; > + int_idx = 5; > + break; > + case 50000: > + new_int_time = 0x200; > + int_idx = 4; > + break; > + case 100000: > + new_int_time = 0x00; > + int_idx = 3; > + break; > + case 200000: > + new_int_time = 0x40; > + int_idx = 2; > + break; > + case 400000: > + new_int_time = 0x80; > + int_idx = 1; > + break; > + case 800000: > + new_int_time = 0xC0; > + int_idx = 0; > + break; > + default: > + return -EINVAL; > + } > + > + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, > + VEML6030_ALS_IT, new_int_time); > + if (ret) { > + dev_err(&data->client->dev, > + "can't update als integration time %d\n", ret); > + return ret; > + } > + > + /* > + * Cache current integration time and update resolution. For every > + * increase in integration time to next level, resolution is halved > + * and vice-versa. > + */ > + if (data->cur_integration_time < int_idx) > + data->cur_resolution <<= int_idx - data->cur_integration_time; > + else if (data->cur_integration_time > int_idx) > + data->cur_resolution >>= data->cur_integration_time - int_idx; > + > + data->cur_integration_time = int_idx; > + > + return ret; > +} > + > +static int veml6030_read_persistence(struct iio_dev *indio_dev, > + int *val, int *val2) > +{ > + int ret, reg, period, x, y; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = veml6030_get_intgrn_tm(indio_dev, &x, &y); > + if (ret < 0) > + return ret; > + > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); > + if (ret) { > + dev_err(&data->client->dev, > + "can't read als conf register %d\n", ret); > + } > + > + /* integration time multiplied by 1/2/4/8 */ > + period = y * (1 << ((reg >> 4) & 0x03)); > + > + *val = period / 1000000; > + *val2 = period % 1000000; > + > + return IIO_VAL_INT_PLUS_MICRO; > +} > + > +static int veml6030_write_persistence(struct iio_dev *indio_dev, > + int val, int val2) > +{ > + int ret, period, x, y; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = veml6030_get_intgrn_tm(indio_dev, &x, &y); > + if (ret < 0) > + return ret; > + > + if (!val) { > + period = val2 / y; > + } else { > + if ((val == 1) && (val2 == 600000)) > + period = 1600000 / y; > + else if ((val == 3) && (val2 == 200000)) > + period = 3200000 / y; > + else if ((val == 6) && (val2 == 400000)) > + period = 6400000 / y; > + else > + period = -1; > + } > + > + if (period <= 0 || period > 8 || hweight8(period) != 1) > + return -EINVAL; > + > + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, > + VEML6030_ALS_PERS, (ffs(period) - 1) << 4); > + if (ret) > + dev_err(&data->client->dev, > + "can't set persistence value %d\n", ret); > + > + return ret; > +} > + > +static int veml6030_set_als_gain(struct iio_dev *indio_dev, > + int val, int val2) > +{ > + int ret, new_gain, gain_idx; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + if (val == 0 && val2 == 125000) { > + new_gain = 0x1000; /* 0x02 << 11 */ > + gain_idx = 3; > + } else if (val == 0 && val2 == 250000) { > + new_gain = 0x1800; > + gain_idx = 2; > + } else if (val == 1 && val2 == 0) { > + new_gain = 0x00; > + gain_idx = 1; > + } else if (val == 2 && val2 == 0) { > + new_gain = 0x800; > + gain_idx = 0; > + } else { > + return -EINVAL; > + } > + > + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, > + VEML6030_ALS_GAIN, new_gain); > + if (ret) { > + dev_err(&data->client->dev, > + "can't set als gain %d\n", ret); > + return ret; > + } > + > + /* > + * Cache currently set gain & update resolution. For every > + * increase in the gain to next level, resolution is halved > + * and vice-versa. > + */ > + if (data->cur_gain < gain_idx) > + data->cur_resolution <<= gain_idx - data->cur_gain; > + else if (data->cur_gain > gain_idx) > + data->cur_resolution >>= data->cur_gain - gain_idx; > + > + data->cur_gain = gain_idx; > + > + return ret; > +} > + > +static int veml6030_get_als_gain(struct iio_dev *indio_dev, > + int *val, int *val2) > +{ > + int ret, reg; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); > + if (ret) { > + dev_err(&data->client->dev, > + "can't read als conf register %d\n", ret); > + return ret; > + } > + > + switch ((reg >> 11) & 0x03) { > + case 0: > + *val = 1; > + *val2 = 0; > + break; > + case 1: > + *val = 2; > + *val2 = 0; > + break; > + case 2: > + *val = 0; > + *val2 = 125000; > + break; > + case 3: > + *val = 0; > + *val2 = 250000; > + break; > + default: > + return -EINVAL; > + } > + > + return IIO_VAL_INT_PLUS_MICRO; > +} > + > +static int veml6030_read_thresh(struct iio_dev *indio_dev, > + int *val, int *val2, int dir) > +{ > + int ret, reg; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + if (dir == IIO_EV_DIR_RISING) > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_WH, ®); > + else > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_WL, ®); > + if (ret) { > + dev_err(&data->client->dev, > + "can't read als threshold value %d\n", ret); > + return ret; > + } > + > + *val = reg & 0xffff; > + return IIO_VAL_INT; > +} > + > +static int veml6030_write_thresh(struct iio_dev *indio_dev, > + int val, int val2, int dir) > +{ > + int ret; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + if (val > 0xFFFF || val < 0 || val2) > + return -EINVAL; > + > + if (dir == IIO_EV_DIR_RISING) { > + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WH, val); > + if (ret) > + dev_err(&data->client->dev, > + "can't set high threshold %d\n", ret); > + } else { > + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WL, val); > + if (ret) > + dev_err(&data->client->dev, > + "can't set low threshold %d\n", ret); > + } > + > + return ret; > +} > + > +/* > + * Provide both raw as well as light reading in lux. > + * light (in lux) = resolution * raw reading > + */ > +static int veml6030_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val, > + int *val2, long mask) > +{ > + int ret, reg; > + struct veml6030_data *data = iio_priv(indio_dev); > + struct regmap *regmap = data->regmap; > + struct device *dev = &data->client->dev; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + case IIO_CHAN_INFO_PROCESSED: > + switch (chan->type) { > + case IIO_LIGHT: > + ret = regmap_read(regmap, VEML6030_REG_ALS_DATA, ®); > + if (ret < 0) { > + dev_err(dev, "can't read als data %d\n", ret); > + return ret; > + } > + if (mask == IIO_CHAN_INFO_PROCESSED) { > + *val = (reg * data->cur_resolution) / 10000; > + *val2 = (reg * data->cur_resolution) % 10000; > + return IIO_VAL_INT_PLUS_MICRO; > + } > + *val = reg; > + return IIO_VAL_INT; > + case IIO_INTENSITY: > + ret = regmap_read(regmap, VEML6030_REG_WH_DATA, ®); > + if (ret < 0) { > + dev_err(dev, "can't read white data %d\n", ret); > + return ret; > + } > + if (mask == IIO_CHAN_INFO_PROCESSED) { > + *val = (reg * data->cur_resolution) / 10000; > + *val2 = (reg * data->cur_resolution) % 10000; > + return IIO_VAL_INT_PLUS_MICRO; > + } > + *val = reg; > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_INT_TIME: > + if (chan->type == IIO_LIGHT) > + return veml6030_get_intgrn_tm(indio_dev, val, val2); > + return -EINVAL; > + case IIO_CHAN_INFO_SCALE: > + if (chan->type == IIO_LIGHT) > + return veml6030_get_als_gain(indio_dev, val, val2); > + return -EINVAL; > + default: > + return -EINVAL; > + } > +} > + > +static int veml6030_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + switch (mask) { > + case IIO_CHAN_INFO_INT_TIME: > + switch (chan->type) { > + case IIO_LIGHT: > + return veml6030_set_intgrn_tm(indio_dev, val, val2); > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_SCALE: > + switch (chan->type) { > + case IIO_LIGHT: > + return veml6030_set_als_gain(indio_dev, val, val2); > + default: > + return -EINVAL; > + } > + default: > + return -EINVAL; > + } > +} > + > +static int veml6030_read_event_val(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, enum iio_event_type type, > + enum iio_event_direction dir, enum iio_event_info info, > + int *val, int *val2) > +{ > + switch (info) { > + case IIO_EV_INFO_VALUE: > + switch (dir) { > + case IIO_EV_DIR_RISING: > + case IIO_EV_DIR_FALLING: > + return veml6030_read_thresh(indio_dev, val, val2, dir); > + default: > + return -EINVAL; > + } > + break; > + case IIO_EV_INFO_PERIOD: > + return veml6030_read_persistence(indio_dev, val, val2); > + default: > + return -EINVAL; > + } > +} > + > +static int veml6030_write_event_val(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, enum iio_event_type type, > + enum iio_event_direction dir, enum iio_event_info info, > + int val, int val2) > +{ > + switch (info) { > + case IIO_EV_INFO_VALUE: > + return veml6030_write_thresh(indio_dev, val, val2, dir); > + case IIO_EV_INFO_PERIOD: > + return veml6030_write_persistence(indio_dev, val, val2); > + default: > + return -EINVAL; > + } > +} > + > +static int veml6030_read_interrupt_config(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, enum iio_event_type type, > + enum iio_event_direction dir) > +{ > + int ret, reg; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); > + if (ret) { > + dev_err(&data->client->dev, > + "can't read als conf register %d\n", ret); > + return ret; > + } > + > + if (reg & VEML6030_ALS_INT_EN) > + return 1; > + else > + return 0; > +} > + > +/* > + * Sensor should not be measuring light when interrupt is configured. > + * Therefore correct sequence to configure interrupt functionality is: > + * shut down -> enable/disable interrupt -> power on > + * > + * state = 1 enables interrupt, state = 0 disables interrupt > + */ > +static int veml6030_write_interrupt_config(struct iio_dev *indio_dev, > + const struct iio_chan_spec *chan, enum iio_event_type type, > + enum iio_event_direction dir, int state) > +{ > + int ret; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + if (state < 0 || state > 1) > + return -EINVAL; > + > + ret = veml6030_als_shut_down(data); > + if (ret < 0) { > + dev_err(&data->client->dev, > + "can't disable als to configure interrupt %d\n", ret); > + return ret; > + } > + > + /* enable interrupt + power on */ > + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, > + VEML6030_ALS_INT_EN | VEML6030_ALS_SD, state << 1); > + if (ret) > + dev_err(&data->client->dev, > + "can't enable interrupt & poweron als %d\n", ret); > + > + return ret; > +} > + > +static const struct iio_info veml6030_info = { > + .read_raw = veml6030_read_raw, > + .write_raw = veml6030_write_raw, > + .read_event_value = veml6030_read_event_val, > + .write_event_value = veml6030_write_event_val, > + .read_event_config = veml6030_read_interrupt_config, > + .write_event_config = veml6030_write_interrupt_config, > + .attrs = &veml6030_attr_group, > + .event_attrs = &veml6030_event_attr_group, > +}; > + > +static const struct iio_info veml6030_info_no_irq = { > + .read_raw = veml6030_read_raw, > + .write_raw = veml6030_write_raw, > + .attrs = &veml6030_attr_group, > +}; > + > +static irqreturn_t veml6030_event_handler(int irq, void *private) > +{ > + int ret, reg, evtdir; > + struct iio_dev *indio_dev = private; > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_INT, ®); > + if (ret) { > + dev_err(&data->client->dev, > + "can't read als interrupt register %d\n", ret); > + return IRQ_HANDLED; > + } > + > + /* Spurious interrupt handling */ > + if (!(reg & (VEML6030_INT_TH_HIGH | VEML6030_INT_TH_LOW))) > + return IRQ_NONE; > + > + if (reg & VEML6030_INT_TH_HIGH) > + evtdir = IIO_EV_DIR_RISING; > + else > + evtdir = IIO_EV_DIR_FALLING; > + > + iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, > + 0, IIO_EV_TYPE_THRESH, evtdir), > + iio_get_time_ns(indio_dev)); > + > + return IRQ_HANDLED; > +} > + > +/* > + * Set ALS gain to 1/8, integration time to 100 ms, PSM to mode 2, > + * persistence to 1 x integration time and the threshold > + * interrupt disabled by default. First shutdown the sensor, > + * update registers and then power on the sensor. > + */ > +static int veml6030_hw_init(struct iio_dev *indio_dev) > +{ > + int ret, val; > + struct veml6030_data *data = iio_priv(indio_dev); > + struct i2c_client *client = data->client; > + > + ret = veml6030_als_shut_down(data); > + if (ret) { > + dev_err(&client->dev, "can't shutdown als %d\n", ret); > + return ret; > + } > + > + ret = regmap_write(data->regmap, VEML6030_REG_ALS_CONF, 0x1001); > + if (ret) { > + dev_err(&client->dev, "can't setup als configs %d\n", ret); > + return ret; > + } > + > + ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_PSM, > + VEML6030_PSM | VEML6030_PSM_EN, 0x03); > + if (ret) { > + dev_err(&client->dev, "can't setup default PSM %d\n", ret); > + return ret; > + } > + > + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WH, 0xFFFF); > + if (ret) { > + dev_err(&client->dev, "can't setup high threshold %d\n", ret); > + return ret; > + } > + > + ret = regmap_write(data->regmap, VEML6030_REG_ALS_WL, 0x0000); > + if (ret) { > + dev_err(&client->dev, "can't setup low threshold %d\n", ret); > + return ret; > + } > + > + ret = veml6030_als_pwr_on(data); > + if (ret) { > + dev_err(&client->dev, "can't poweron als %d\n", ret); > + return ret; > + } > + > + /* Wait 4 ms to let processor & oscillator start correctly */ > + usleep_range(4000, 4002); > + > + /* Clear stale interrupt status bits if any during start */ > + ret = regmap_read(data->regmap, VEML6030_REG_ALS_INT, &val); > + if (ret < 0) { > + dev_err(&client->dev, > + "can't clear als interrupt status %d\n", ret); > + return ret; > + } > + > + /* Cache currently active measurement parameters */ > + data->cur_gain = 3; > + data->cur_resolution = 4608; > + data->cur_integration_time = 3; > + > + return ret; > +} > + > +static int veml6030_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + int ret; > + struct veml6030_data *data; > + struct iio_dev *indio_dev; > + struct regmap *regmap; > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { > + dev_err(&client->dev, "i2c adapter doesn't support plain i2c\n"); > + return -EOPNOTSUPP; > + } > + > + regmap = devm_regmap_init_i2c(client, &veml6030_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&client->dev, "can't setup regmap\n"); > + return PTR_ERR(regmap); > + } > + > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + i2c_set_clientdata(client, indio_dev); > + data->client = client; > + data->regmap = regmap; > + > + indio_dev->dev.parent = &client->dev; > + indio_dev->name = "veml6030"; > + indio_dev->channels = veml6030_channels; > + indio_dev->num_channels = ARRAY_SIZE(veml6030_channels); > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + if (client->irq) { > + ret = devm_request_threaded_irq(&client->dev, client->irq, > + NULL, veml6030_event_handler, > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, > + "veml6030", indio_dev); > + if (ret < 0) { > + dev_err(&client->dev, > + "irq %d request failed\n", client->irq); > + return ret; > + } > + indio_dev->info = &veml6030_info; > + } else { > + indio_dev->info = &veml6030_info_no_irq; > + } > + > + ret = veml6030_hw_init(indio_dev); > + if (ret < 0) > + return ret; > + > + ret = devm_add_action_or_reset(&client->dev, > + veml6030_als_shut_down_action, data); > + if (ret < 0) > + return ret; > + > + return devm_iio_device_register(&client->dev, indio_dev); > +} > + > +static int __maybe_unused veml6030_runtime_suspend(struct device *dev) > +{ > + int ret; > + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); Hmm. For platform devices there was a recent move to get rid of the conversion dance going on here (it's the same as dev_get_drvdata(dev)) but we seem to be sticking to this for for i2c devices. > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = veml6030_als_shut_down(data); > + if (ret < 0) > + dev_err(&data->client->dev, "can't suspend als %d\n", ret); > + > + return ret; > +} > + > +static int __maybe_unused veml6030_runtime_resume(struct device *dev) > +{ > + int ret; > + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); > + struct veml6030_data *data = iio_priv(indio_dev); > + > + ret = veml6030_als_pwr_on(data); > + if (ret < 0) > + dev_err(&data->client->dev, "can't resume als %d\n", ret); > + > + return ret; > +} > + > +static const struct dev_pm_ops veml6030_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > + pm_runtime_force_resume) > + SET_RUNTIME_PM_OPS(veml6030_runtime_suspend, > + veml6030_runtime_resume, NULL) > +}; > + > +static const struct of_device_id veml6030_of_match[] = { > + { .compatible = "vishay,veml6030" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, veml6030_of_match); > + > +static const struct i2c_device_id veml6030_id[] = { > + { "veml6030", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, veml6030_id); > + > +static struct i2c_driver veml6030_driver = { > + .driver = { > + .name = "veml6030", > + .of_match_table = veml6030_of_match, > + .pm = &veml6030_pm_ops, > + }, > + .probe = veml6030_probe, > + .id_table = veml6030_id, > +}; > +module_i2c_driver(veml6030_driver); > + > +MODULE_AUTHOR("Rishi Gupta "); > +MODULE_DESCRIPTION("VEML6030 Ambient Light Sensor"); > +MODULE_LICENSE("GPL v2");