Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Benoit Parrot <bparrot@ti.com>
To:     Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
CC:     <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        Benoit Parrot <bparrot@ti.com>
Subject: [Patch v3 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
Date:   Tue, 12 Nov 2019 08:27:49 -0600
Message-ID: <20191112142753.22976-7-bparrot@ti.com>
In-Reply-To: <20191112142753.22976-1-bparrot@ti.com>
References: <20191112142753.22976-1-bparrot@ti.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Add device nodes for CSI2 camera board OV5640.
Add the CAL port nodes with the necessary linkage to the ov5640 nodes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra72-evm-common.dtsi | 35 +++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 8641a3d7d8ad..608c7676c293 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -187,6 +187,12 @@
 		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &dra7_pmx_core {
@@ -269,6 +275,23 @@
 			line-name = "vin6_sel_s0";
 		};
 	};
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 };
 
 &uart1 {
@@ -580,3 +603,15 @@
 &pcie1_rc {
 	status = "okay";
 };
+
+&cal {
+	status = "okay";
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint@0 {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
-- 
2.17.1