Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Rasmus Villemoes <linux@rasmusvillemoes.dk>
To:     Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Vladimir Oltean <olteanv@gmail.com>, Marc Zyngier <maz@kernel.org>,
        netdev@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>,
        Rasmus Villemoes <linux@rasmusvillemoes.dk>
Subject: [PATCH v2 0/2] ARM: dts: ls1021a: define and use external interrupt lines
Date:   Thu, 14 Nov 2019 12:02:51 +0100
Message-Id: <20191114110254.32171-1-linux@rasmusvillemoes.dk>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

A device tree binding documentation as well as a driver implementing
support for the external interrupt lines on the ls1021a has been
merged into irqchip-next, so will very likely appear in v5.5. See

87cd38dfd9e6 dt/bindings: Add bindings for Layerscape external irqs
0dcd9f872769 irqchip: Add support for Layerscape external interrupt lines

present in next-20191114.

These patches simply add the extirq node to the ls1021a.dtsi and make
use of it on the LS1021A-TSN board. I hope these can be picked up so
they also land in v5.5, so we don't have to wait a full extra release
cycle.

v2: fix interrupt type in 2/2 (s/IRQ_TYPE_EDGE_FALLING/IRQ_TYPE_LEVEL_LOW/).

Rasmus Villemoes (1):
  ARM: dts: ls1021a: add node describing external interrupt lines

Vladimir Oltean (1):
  ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs

 arch/arm/boot/dts/ls1021a-tsn.dts |  4 ++++
 arch/arm/boot/dts/ls1021a.dtsi    | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

-- 
2.23.0