Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Thu, 14 Nov 2019 14:52:35 -0600
From:   Rob Herring <robh@kernel.org>
To:     Chunyan Zhang <chunyan.zhang@unisoc.com>
Cc:     Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Orson Zhai <orsonzhai@gmail.com>,
        Baolin Wang <baolin.wang7@gmail.com>,
        Chunyan Zhang <zhang.lyra@gmail.com>
Subject: Re: [PATCH v2 2/5] dt-bindings: serial: Convert sprd-uart to
 json-schema
Message-ID: <20191114205235.GA16668@bogus>
References: <20191111090230.3402-1-chunyan.zhang@unisoc.com>
 <20191111090230.3402-3-chunyan.zhang@unisoc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20191111090230.3402-3-chunyan.zhang@unisoc.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon, Nov 11, 2019 at 05:02:27PM +0800, Chunyan Zhang wrote:
> 
> Convert the sprd-uart binding to DT schema using json-schema.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> ---
>  .../devicetree/bindings/serial/sprd-uart.txt  | 32 ---------
>  .../devicetree/bindings/serial/sprd-uart.yaml | 69 +++++++++++++++++++
>  2 files changed, 69 insertions(+), 32 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.yaml
> 
> diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
> deleted file mode 100644
> index 9607dc616205..000000000000
> --- a/Documentation/devicetree/bindings/serial/sprd-uart.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -* Spreadtrum serial UART
> -
> -Required properties:
> -- compatible: must be one of:
> -  * "sprd,sc9836-uart"
> -  * "sprd,sc9860-uart", "sprd,sc9836-uart"
> -
> -- reg: offset and length of the register set for the device
> -- interrupts: exactly one interrupt specifier
> -- clock-names: Should contain following entries:
> -  "enable" for UART module enable clock,
> -  "uart" for UART clock,
> -  "source" for UART source (parent) clock.
> -- clocks: Should contain a clock specifier for each entry in clock-names.
> -  UART clock and source clock are optional properties, but enable clock
> -  is required.
> -
> -Optional properties:
> -- dma-names: Should contain "rx" for receive and "tx" for transmit channels.
> -- dmas: A list of dma specifiers, one for each entry in dma-names.
> -
> -Example:
> -	uart0: serial@0 {
> -		compatible = "sprd,sc9860-uart",
> -			     "sprd,sc9836-uart";
> -		reg = <0x0 0x100>;
> -		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> -		dma-names = "rx", "tx";
> -		dmas = <&ap_dma 19>, <&ap_dma 20>;
> -		clock-names = "enable", "uart", "source";
> -		clocks = <&clk_ap_apb_gates 9>, <&clk_uart0>, <&ext_26m>;
> -	};
> diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
> new file mode 100644
> index 000000000000..0cc4668a9b9c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license please. If you are okay with that on both patches, I can 
fix them and apply patches 1-4.

Rob