Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750862AbWAPPHs (ORCPT ); Mon, 16 Jan 2006 10:07:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750923AbWAPPHs (ORCPT ); Mon, 16 Jan 2006 10:07:48 -0500 Received: from mx02.qsc.de ([213.148.130.14]:36270 "EHLO mx02.qsc.de") by vger.kernel.org with ESMTP id S1750862AbWAPPHr convert rfc822-to-8bit (ORCPT ); Mon, 16 Jan 2006 10:07:47 -0500 From: =?iso-8859-1?q?Ren=E9_Rebe?= Organization: ExactCODE To: linux-kernel@vger.kernel.org Subject: interrupt routing ATi RS480M (MSI Megabook S270) Date: Mon, 16 Jan 2006 16:07:24 +0100 User-Agent: KMail/1.9 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200601161607.24209.rene@exactcode.de> X-Spam-Score: -1.4 (-) X-Spam-Report: Spam detection software, running on the system "grum.localhost", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or label similar future email. If you have any questions, see the administrator of that system for details. Content preview: Hi all, I have a MSI Megabook S270 with AMD Turion MT-30 and the interrupt routing never worked quite right. I'll describe the problems with 2.6.15, since I reinstalled the system recently and do not have older kernels to quote logs for those. [...] Content analysis details: (-1.4 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -1.4 ALL_TRUSTED Passed through trusted hosts only via SMTP Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 31519 Lines: 706 Hi all, I have a MSI Megabook S270 with AMD Turion MT-30 and the interrupt routing never worked quite right. I'll describe the problems with 2.6.15, since I reinstalled the system recently and do not have older kernels to quote logs for those. First I have to boot with e.g. noapic, otherwise the system time runs twice as fast but with and without noapic. pci=routeirq, pci=assign-busses or irqpoll the interrupt assigned to the USB controllers gets disabled and thus renders USB unfunctional. Attached are dmesg and /proc/interrupts of 2.6.15 once vanilla and once with noapic. Just drop a note if more information, option or patch to test is welcome: Bootdata ok (command line is root=/dev/hda3 ro) Linux version 2.6.15-dist (root@localhost) (gcc version 4.0.2) #1 Sun Jan 15 16:04:52 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001df40000 (usable) BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data) BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS) BIOS-e820: 000000001e000000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: RSDP (v000 MSI ) @ 0x00000000000f8340 ACPI: RSDT (v001 MSI 1013 0x06272005 MSFT 0x00000097) @ 0x000000001df40000 ACPI: FADT (v002 MSI 1013 0x06272005 MSFT 0x00000097) @ 0x000000001df40200 ACPI: MADT (v001 MSI OEMAPIC 0x06272005 MSFT 0x00000097) @ 0x000000001df40300 ACPI: WDRT (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @ 0x000000001df40360 ACPI: MCFG (v001 MSI OEMMCFG 0x06272005 MSFT 0x00000097) @ 0x000000001df403b0 ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x000000001df43560 ACPI: OEMB (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @ 0x000000001df50040 ACPI: DSDT (v001 MSI 1013 0x06272005 INTL 0x02002026) @ 0x0000000000000000 No mptable found. On node 0 totalpages: 120168 DMA zone: 3197 pages, LIFO batch:0 DMA32 zone: 116971 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Checking aperture... CPU 0: aperture @ e062000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/hda3 ro Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 1591.890 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 475600k/490752k available (1709k kernel code, 14464k reserved, 731k data, 172k init) Calibrating delay using timer specific routine.. 3190.45 BogoMIPS (lpj=6380907) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) mtrr: v2.0 (20020519) CPU: AMD Turion(tm) 64 Mobile Technology MT-30 stepping 02 Using local APIC timer interrupts. Detected 12.436 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 GSI 21 sharing vector 0xA9 and IRQ 21 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC] (gpe 6) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: fbe00000-fbefffff PREFETCH window: f4000000-faffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 0000e000-0000e0ff IO window: 0000e400-0000e4ff PREFETCH window: 30000000-31ffffff MEM window: 36000000-37ffffff PCI: Bus 7, cardbus bridge: 0000:02:04.1 IO window: 0000ec00-0000ecff IO window: 00001000-000010ff PREFETCH window: 32000000-33ffffff MEM window: 38000000-39ffffff PCI: Bridge: 0000:00:14.4 IO window: e000-efff MEM window: fbf00000-fbffffff PREFETCH window: 30000000-34ffffff GSI 16 sharing vector 0xB1 and IRQ 16 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 16 GSI 17 sharing vector 0xB9 and IRQ 17 ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 17 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (47 C) Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 16, io mem 0xfbdff000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: POP2 RTL AC97 MC97 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 172k freed ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbdfd000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected APIC error on CPU0: 00(40) irq 16: nobody cared (try booting with the "irqpoll" option) Call Trace: {__report_bad_irq+48} {note_interrupt+425} {usb_hcd_irq+41} {__do_IRQ+139} {do_IRQ+48} {ret_from_intr+0} {acpi_hw_register_read+196} {acpi_processor_idle+432} {cpu_idle+63} {start_kernel+447} {_sinittext+583} handlers: [] (usb_hcd_irq+0x0/0x56) [] (usb_hcd_irq+0x0/0x56) Disabling IRQ #16 ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 16, io mem 0xfbdfe000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ATIIXP: IDE controller at PCI slot 0000:00:14.1 GSI 18 sharing vector 0xC1 and IRQ 18 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input1 hda: TOSHIBA MK8025GAS, ATA DISK drive logips2pp: Detected unknown logitech mouse model 99 input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... logips2pp: Detected unknown logitech mouse model 99 input: ImPS/2 Logitech Wheel Mouse as /class/input/input3 hdc: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 21 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] sbp2: $Rev: 1306 $ Ben Collins ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance hda: max request size: 128KiB hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 JFS: nTxBlock = 3719, nTxLock = 29754 NTFS driver 2.1.25 [Flags: R/O MODULE]. SGI XFS with large block/inode numbers, no debug enabled Registering unionfs 1.1.1 ReiserFS: hda3: found reiserfs format "3.6" with standard journal ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000a82438] ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k ReiserFS: hda4: found reiserfs format "3.6" with standard journal ReiserFS: hda4: using ordered data mode ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda4: checking transaction log (hda4) ReiserFS: hda4: Using r5 hash to sort names pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 GSI 19 sharing vector 0xC9 and IRQ 19 ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 19 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 19 ACPI: PCI interrupt for device 0000:00:14.6 disabled ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 19 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 GSI 20 sharing vector 0xD1 and IRQ 20 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 20 eth0: RealTek RTL8139 at 0xe800, 00:0c:76:f8:ac:a7, IRQ 20 eth0: Identified 8139 chip type 'RTL-8101' ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 16 Yenta: CardBus bridge found at 0000:02:04.0 [1462:0131] Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 17 Yenta: CardBus bridge found at 0000:02:04.1 [1462:0131] Yenta: ISA IRQ mask 0x0cb8, PCI irq 17 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 22 (level, low) -> IRQ 22 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection usb 3-1: new low speed USB device using ohci_hcd and address 2 ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ. CPU0 0: 36321 IO-APIC-edge timer 1: 217 IO-APIC-edge i8042 8: 0 IO-APIC-edge rtc 12: 217 IO-APIC-edge i8042 14: 1474 IO-APIC-edge ide0 15: 11 IO-APIC-edge ide1 16: 188264 IO-APIC-level ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3, yenta 17: 0 IO-APIC-level yenta 19: 2 IO-APIC-level ATI IXP, ATI IXP Modem 21: 7 IO-APIC-level acpi, ohci1394 22: 6135 IO-APIC-level ipw2200 NMI: 39 LOC: 18137 ERR: 1 MIS: 0 Bootdata ok (command line is root=/dev/hda3 ro noapic) Linux version 2.6.15-dist (root@localhost) (gcc version 4.0.2) #1 Sun Jan 15 16:04:52 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001df40000 (usable) BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data) BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS) BIOS-e820: 000000001e000000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) ACPI: RSDP (v000 MSI ) @ 0x00000000000f8340 ACPI: RSDT (v001 MSI 1013 0x06272005 MSFT 0x00000097) @ 0x000000001df40000 ACPI: FADT (v002 MSI 1013 0x06272005 MSFT 0x00000097) @ 0x000000001df40200 ACPI: MADT (v001 MSI OEMAPIC 0x06272005 MSFT 0x00000097) @ 0x000000001df40300 ACPI: WDRT (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @ 0x000000001df40360 ACPI: MCFG (v001 MSI OEMMCFG 0x06272005 MSFT 0x00000097) @ 0x000000001df403b0 ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x000000001df43560 ACPI: OEMB (v001 MSI MSI_OEM 0x06272005 MSFT 0x00000097) @ 0x000000001df50040 ACPI: DSDT (v001 MSI 1013 0x06272005 INTL 0x02002026) @ 0x0000000000000000 No mptable found. On node 0 totalpages: 120168 DMA zone: 3197 pages, LIFO batch:0 DMA32 zone: 116971 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 16 ACPI: Skipping IOAPIC probe due to 'noapic' option. Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Checking aperture... CPU 0: aperture @ e062000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/hda3 ro noapic Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 1591.893 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Memory: 475600k/490752k available (1709k kernel code, 14464k reserved, 731k data, 172k init) Calibrating delay using timer specific routine.. 3190.40 BogoMIPS (lpj=6380813) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) mtrr: v2.0 (20020519) CPU: AMD Turion(tm) 64 Mobile Technology MT-30 stepping 02 ACPI: setting ELCR to 0200 (from 0ce0) Using local APIC timer interrupts. Detected 12.436 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC] (gpe 6) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: fbe00000-fbefffff PREFETCH window: f4000000-faffffff PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 0000e000-0000e0ff IO window: 0000e400-0000e4ff PREFETCH window: 30000000-31ffffff MEM window: 36000000-37ffffff PCI: Bus 7, cardbus bridge: 0000:02:04.1 IO window: 0000ec00-0000ecff IO window: 00001000-000010ff PREFETCH window: 32000000-33ffffff MEM window: 38000000-39ffffff PCI: Bridge: 0000:00:14.4 IO window: e000-efff MEM window: fbf00000-fbffffff PREFETCH window: 30000000-34ffffff ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKE] -> GSI 6 (level, low) -> IRQ 6 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (48 C) Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 11, io mem 0xfbdff000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 spurious 8259A interrupt: IRQ7. NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: POP2 RTL AC97 MC97 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 172k freed ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 11, io mem 0xfbdfd000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 11, io mem 0xfbdfe000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected input: AT Translated Set 2 keyboard as /class/input/input1 ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usb 3-1: new low speed USB device using ohci_hcd and address 2 logips2pp: Detected unknown logitech mouse model 99 input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 hda: TOSHIBA MK8025GAS, ATA DISK drive input: Logitech USB Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1 logips2pp: Detected unknown logitech mouse model 99 input: ImPS/2 Logitech Wheel Mouse as /class/input/input4 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... irq 11: nobody cared (try booting with the "irqpoll" option) Call Trace: {__report_bad_irq+48} {note_interrupt+425} {usb_hcd_irq+41} {__do_IRQ+139} {do_IRQ+48} {ret_from_intr+0} {acpi_processor_idle+432} {cpu_idle+63} {start_kernel+447} {_sinittext+583} handlers: [] (usb_hcd_irq+0x0/0x56) [] (usb_hcd_irq+0x0/0x56) [] (usb_hcd_irq+0x0/0x56) Disabling IRQ #11 hdc: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1313 $ Ben Collins ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [LNKF] -> GSI 7 (level, low) -> IRQ 7 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[7] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] sbp2: $Rev: 1306 $ Ben Collins ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance hda: max request size: 128KiB hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 JFS: nTxBlock = 3719, nTxLock = 29754 NTFS driver 2.1.25 [Flags: R/O MODULE]. SGI XFS with large block/inode numbers, no debug enabled Registering unionfs 1.1.1 ReiserFS: hda3: found reiserfs format "3.6" with standard journal ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000a82438] ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k ReiserFS: hda4: found reiserfs format "3.6" with standard journal ReiserFS: hda4: using ordered data mode ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda4: checking transaction log (hda4) ReiserFS: hda4: replayed 12 transactions in 0 seconds ReiserFS: hda4: Using r5 hash to sort names pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt for device 0000:00:14.6 disabled ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 eth0: RealTek RTL8139 at 0xe800, 00:0c:76:f8:ac:a7, IRQ 5 eth0: Identified 8139 chip type 'RTL-8101' ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:02:04.0 [1462:0131] Yenta: ISA IRQ mask 0x0018, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKE] -> GSI 6 (level, low) -> IRQ 6 Yenta: CardBus bridge found at 0000:02:04.1 [1462:0131] Yenta: ISA IRQ mask 0x0018, PCI irq 6 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection psmouse.c: Wheel Mouse at isa0060/serio2/input0 lost synchronization, throwing 1 bytes away. usb 3-1: USB disconnect, address 2 ohci_hcd 0000:00:13.1: IRQ INTR_SF lossage hotplug++[1446]: segfault at 00002aaa2aabe110 rip 000000000040d6e9 rsp 00007fffffa97e70 error 4 usb 3-1: new low speed USB device using ohci_hcd and address 3 ACPI: PCI interrupt for device 0000:02:04.1 disabled ACPI: PCI interrupt for device 0000:02:04.0 disabled CPU0 0: 41758 XT-PIC timer 1: 754 XT-PIC i8042 2: 0 XT-PIC cascade 5: 7283 XT-PIC ipw2200 7: 7271 XT-PIC ohci1394 8: 0 XT-PIC rtc 9: 5 XT-PIC acpi 10: 2 XT-PIC ATI IXP, ATI IXP Modem 11: 100000 XT-PIC ehci_hcd:usb1, ohci_hcd:usb2, ohci_hcd:usb3 12: 349 XT-PIC i8042 14: 1762 XT-PIC ide0 15: 11 XT-PIC ide1 NMI: 31 LOC: 41735 ERR: 36 MIS: 0 -- Ren? Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany) http://www.exactcode.de | http://www.t2-project.org +49 (0)30 255 897 45 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/