Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932173AbWAQQrM (ORCPT ); Tue, 17 Jan 2006 11:47:12 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932179AbWAQQrM (ORCPT ); Tue, 17 Jan 2006 11:47:12 -0500 Received: from 213-140-2-71.ip.fastwebnet.it ([213.140.2.71]:3463 "EHLO aa004msg.fastwebnet.it") by vger.kernel.org with ESMTP id S932173AbWAQQrK (ORCPT ); Tue, 17 Jan 2006 11:47:10 -0500 Date: Tue, 17 Jan 2006 17:45:00 +0100 From: Mattia Dongili To: john stultz Cc: Andrew Morton , linux-kernel@vger.kernel.org Subject: Re: first bisection results in -mm3 [was: Re: 2.6.15-mm2: reiser3 oops on suspend and more (bonus oops shot!)] Message-ID: <20060117164500.GB3591@inferi.kami.home> Mail-Followup-To: john stultz , Andrew Morton , linux-kernel@vger.kernel.org References: <20060111100016.GC2574@elf.ucw.cz> <20060110235554.GA3527@inferi.kami.home> <20060110170037.4a614245.akpm@osdl.org> <20060111184027.GB4735@inferi.kami.home> <20060112220825.GA3490@inferi.kami.home> <1137108362.2890.141.camel@cog.beaverton.ibm.com> <20060114120816.GA3554@inferi.kami.home> <1137442582.27699.12.camel@cog.beaverton.ibm.com> <20060116204057.GC3639@inferi.kami.home> <1137447763.27699.27.camel@cog.beaverton.ibm.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1137447763.27699.27.camel@cog.beaverton.ibm.com> X-Message-Flag: Cranky? Try Free Software instead! X-Operating-System: Linux 2.6.15-mm4-2 i686 X-Editor: Vim http://www.vim.org/ X-Disclaimer: Buh! User-Agent: Mutt/1.5.11 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 27958 Lines: 443 On Mon, Jan 16, 2006 at 01:42:43PM -0800, john stultz wrote: [...] > and send me your dmesg. ops, forgot it, here it is as plain text [ 0.000000] Linux version 2.6.15-mm4-3 (mattia@inferi) (gcc version 4.0.3 20051201 (prerelease) (Debian 4.0.2-5)) #4 PREEMPT Tue Jan 17 16:00:41 CET 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) [ 0.000000] BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable) [ 0.000000] BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] 255MB LOWMEM available. [ 0.000000] On node 0 totalpages: 65408 [ 0.000000] DMA zone: 4096 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 0 pages, LIFO batch:0 [ 0.000000] Normal zone: 61312 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6cd0 [ 0.000000] ACPI: RSDT (v001 SONY C0 0x20010809 PTL 0x00000000) @ 0x0fefa88f [ 0.000000] ACPI: FADT (v001 SONY C0 0x20010809 PTL 0x01000000) @ 0x0fefef64 [ 0.000000] ACPI: BOOT (v001 SONY C0 0x20010809 PTL 0x00000001) @ 0x0fefefd8 [ 0.000000] ACPI: DSDT (v001 SONY C0 0x20010809 PTL 0x0100000d) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000) [ 0.000000] Detected 994.334 MHz processor. [ 16.592942] Built 1 zonelists [ 16.592947] Local APIC disabled by BIOS -- reenabling. [ 16.592952] Found and enabled local APIC! [ 16.592958] mapped APIC to ffffd000 (fee00000) [ 16.592965] Enabling fast FPU save and restore... done. [ 16.592970] Enabling unmasked SIMD FPU exception support... done. [ 16.592976] Initializing CPU#0 [ 16.592988] Kernel command line: root=/dev/hda1 ro vga=extended video=radeonfb:800x600-32@60 fbcon=font:Acorn8x8 lapic resume=/dev/hda2 [ 16.593550] CPU 0 irqstacks, hard=c0416000 soft=c0417000 [ 16.593557] PID hash table entries: 1024 (order: 10, 16384 bytes) [ 17.544379] Console: colour VGA+ 80x50 [ 17.545836] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 17.546478] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.561178] Memory: 255112k/261632k available (2067k kernel code, 5900k reserved, 913k data, 152k init, 0k highmem) [ 17.561225] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 17.640678] Calibrating delay using timer specific routine.. 1989.94 BogoMIPS (lpj=3979887) [ 17.640821] Mount-cache hash table entries: 512 [ 17.641031] CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 17.641045] CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 17.641061] CPU: L1 I cache: 16K, L1 D cache: 16K [ 17.641134] CPU: L2 cache: 512K [ 17.641176] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 [ 17.641188] Intel machine check architecture supported. [ 17.641233] Intel machine check reporting enabled on CPU#0. [ 17.641286] mtrr: v2.0 (20020519) [ 17.641331] CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01 [ 17.641437] Checking 'hlt' instruction... OK. [ 17.658974] tbxface-0109 [02] load_tables : ACPI Tables successfully acquired [ 17.670609] Parsing all Control Methods: [ 17.671138] Table [DSDT](id 0005) - 555 Objects with 54 Devices 191 Methods 21 Regions [ 17.671230] ACPI Namespace successfully loaded at root c04491f8 [ 17.705135] evxfevnt-0091 [03] enable : Transition to ACPI mode successful [ 17.813101] NET: Registered protocol family 16 [ 17.813176] ACPI: bus type pci registered [ 17.816737] PCI: PCI BIOS revision 2.10 entry at 0xfd9aa, last bus=2 [ 17.816789] PCI: Using configuration type 1 [ 17.817061] ACPI: Subsystem revision 20051216 [ 17.818967] evgpeblk-0941 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 [ 17.819111] evgpeblk-0941 [06] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9 [ 17.820643] evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block [ 17.821507] evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block [ 17.826779] Completing Region/Field/Buffer/Package initialization:.............................................................. [ 17.833828] Initialized 20/21 Regions 0/0 Fields 25/25 Buffers 17/27 Packages (564 nodes) [ 17.833917] Executing all Device _STA and_INI methods:.......................................................... [ 17.843774] 58 Devices found containing: 3 _STA, 3 _INI methods [ 17.843883] ACPI: Interpreter enabled [ 17.843925] ACPI: Using PIC for interrupt routing [ 17.845783] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.845829] PCI: Probing PCI hardware (bus 00) [ 17.883395] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 17.883443] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 17.883527] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 17.883771] Boot video device is 0000:01:00.0 [ 17.884009] PCI: Transparent bridge - 0000:00:1e.0 [ 17.884128] PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') [ 17.884237] PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') [ 17.884324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.902237] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 17.905223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 17.912405] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode. [ 17.956448] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) [ 17.957856] ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled. [ 17.959316] ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled. [ 17.960988] ACPI: PCI Interrupt Link [LNKD] (IRQs *9) [ 17.962597] ACPI: PCI Interrupt Link [LNKE] (IRQs *9) [ 17.964195] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0 [ 17.965645] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. [ 17.967108] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled. [ 17.967877] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.968022] PCI: Using ACPI for IRQ routing [ 17.968067] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.973247] PCI: Bridge: 0000:00:01.0 [ 17.973292] IO window: 3000-3fff [ 17.973336] MEM window: d0100000-d01fffff [ 17.973379] PREFETCH window: d8000000-dfffffff [ 17.973440] PCI: Bus 3, cardbus bridge: 0000:02:05.0 [ 17.973484] IO window: 00004400-000044ff [ 17.973528] IO window: 00004800-000048ff [ 17.973571] PREFETCH window: 20000000-21ffffff [ 17.973616] MEM window: 24000000-25ffffff [ 17.973659] PCI: Bus 7, cardbus bridge: 0000:02:05.1 [ 17.973703] IO window: 00004c00-00004cff [ 17.973746] IO window: 00001400-000014ff [ 17.973790] PREFETCH window: 22000000-23ffffff [ 17.973835] MEM window: 26000000-27ffffff [ 17.973878] PCI: Bridge: 0000:00:1e.0 [ 17.973920] IO window: 4000-4fff [ 17.973964] MEM window: d0200000-d02fffff [ 17.974009] PREFETCH window: 20000000-23ffffff [ 17.974067] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 17.974130] **** SET: Misaligned resource pointer: cff4a7e2 Type 07 Len 0 [ 17.975437] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 [ 17.975484] PCI: setting IRQ 9 as level-triggered [ 17.975489] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 [ 17.975605] PCI: Setting latency timer of device 0000:02:05.0 to 64 [ 17.975653] **** SET: Misaligned resource pointer: cff4a7e2 Type 07 Len 0 [ 17.976947] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 [ 17.976992] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 17.977107] PCI: Setting latency timer of device 0000:02:05.1 to 64 [ 17.977203] Simple Boot Flag at 0x36 set to 0x1 [ 17.978505] Initializing Cryptographic API [ 17.978554] io scheduler noop registered [ 17.978631] io scheduler anticipatory registered [ 17.978708] io scheduler deadline registered [ 17.978795] io scheduler cfq registered [ 17.979079] acpi_bus-0201 [01] bus_set_power : Device is not power manageable [ 17.979240] **** SET: Misaligned resource pointer: cff4a2e2 Type 07 Len 0 [ 17.980662] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 17.980708] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 17.992388] radeonfb: Retrieved PLL infos from BIOS [ 17.992434] radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz [ 17.992488] radeonfb: PLL min 12000 max 35000 [ 18.020366] Time: tsc clocksource has been installed. [ 18.020412] TSC clocksource: 994334 khz, rating=300 mult=4218204 shift=22 [ 18.927606] Non-DDC laptop panel detected [ 19.922774] radeonfb: Monitor 1 type LCD found [ 19.922818] radeonfb: Monitor 2 type no found [ 19.922864] radeonfb: panel ID string: Samsung LTN150P1-L02 [ 19.922909] radeonfb: detected LVDS panel size from BIOS: 1400x1050 [ 19.922954] radeondb: BIOS provided dividers will be used [ 20.158575] radeonfb: Dynamic Clock Power Management enabled [ 20.430358] Console: switching to colour frame buffer device 100x75 [ 20.431228] radeonfb (0000:01:00.0): ATI Radeon LY [ 20.433773] ACPI: AC Adapter [ACAD] (on-line) [ 20.442738] ACPI: Battery Slot [BAT1] (battery present) [ 20.445059] ACPI: Battery Slot [BAT2] (battery absent) [ 20.445181] ACPI: Lid Switch [LID] [ 20.445268] ACPI: Power Button (CM) [PWRB] [ 20.445603] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 20.452669] ACPI: Thermal Zone [ATF0] (49 C) [ 20.452793] isapnp: Scanning for PnP cards... [ 20.806346] isapnp: No Plug & Play device found [ 20.842860] PNP: No PS/2 controller found. Probing ports directly. [ 20.844641] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 20.844831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 20.845099] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 20.845226] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 20.845420] ICH3M: IDE controller at PCI slot 0000:00:1f.1 [ 20.845536] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 20.845656] pci_irq-0384 [02] pci_irq_derive : Unable to derive IRQ for device 0000:00:1f.1 [ 20.845880] ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI [ 20.846005] ICH3M: chipset revision 1 [ 20.846080] ICH3M: not 100% native mode: will probe irqs later [ 20.846202] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio [ 20.846377] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio [ 20.846547] Probing IDE interface ide0... [ 20.855671] check_periodic_interval: short interval! 37827221 ns. [ 20.861705] bad calibration or timers may be broken. [ 20.867883] check_periodic_interval: short interval! 12223630 ns. [ 20.873956] bad calibration or timers may be broken. [ 20.880240] check_periodic_interval: short interval! 12367068 ns. [ 20.886412] bad calibration or timers may be broken. [ 20.892744] check_periodic_interval: short interval! 12514412 ns. [ 20.898987] bad calibration or timers may be broken. [ 20.905372] check_periodic_interval: short interval! 12638672 ns. [ 20.911666] bad calibration or timers may be broken. [ 20.918195] hda: FUJITSU MHV2080AH, ATA DISK drive [ 20.924698] check_periodic_interval: short interval! 19340529 ns. [ 20.931112] bad calibration or timers may be broken. [ 20.937686] check_periodic_interval: short interval! 12999194 ns. [ 20.944178] bad calibration or timers may be broken. [ 20.950834] check_periodic_interval: short interval! 13158854 ns. [ 20.957396] bad calibration or timers may be broken. [ 20.964062] check_periodic_interval: short interval! 13238120 ns. [ 20.970600] bad calibration or timers may be broken. [ 20.977278] check_periodic_interval: short interval! 13227073 ns. [ 20.983785] bad calibration or timers may be broken. [ 20.994991] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 21.001511] Probing IDE interface ide1... [ 21.011841] Probing IDE interface ide1... [ 21.022153] hda: max request size: 128KiB [ 21.028919] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 21.035484] hda: cache flushes supported [ 21.041980] hda: hda1 hda2 hda3 hda4 < hda5 hda6 > [ 21.049415] mice: PS/2 mouse device common for all mice [ 21.055969] NET: Registered protocol family 2 [ 21.063402] input: AT Translated Set 2 keyboard as /class/input/input0 [ 21.070101] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 21.076947] TCP established hash table entries: 16384 (order: 4, 65536 bytes) [ 21.083747] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 21.090516] TCP: Hash tables configured (established 16384 bind 16384) [ 21.097112] TCP reno registered [ 21.103773] TCP bic registered [ 21.110268] NET: Registered protocol family 1 [ 21.116704] NET: Registered protocol family 17 [ 21.123072] Using IPI Shortcut mode [ 21.154137] ACPI wakeup devices: [ 21.160382] PWRB USB1 USB2 USB3 CRD0 CRD1 LAN EC0 COMA MODE [ 21.166805] ACPI: (supports S0 S3 S4 S5) [ 21.173777] ReiserFS: hda1: found reiserfs format "3.6" with standard journal [ 21.182730] ReiserFS: hda1: using ordered data mode [ 21.189268] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 21.204655] ReiserFS: hda1: checking transaction log (hda1) [ 21.212097] ReiserFS: hda1: Using r5 hash to sort names [ 21.218665] VFS: Mounted root (reiserfs filesystem) readonly. [ 21.225419] Freeing unused kernel memory: 152k freed [ 22.826555] hw_random hardware driver 1.0.0 loaded [ 22.863045] usbcore: registered new driver usbfs [ 22.870147] usbcore: registered new driver hub [ 22.880784] Linux agpgart interface v0.101 (c) Dave Jones [ 22.894656] agpgart: Detected an Intel 830M Chipset. [ 22.916452] agpgart: AGP aperture is 256M @ 0xe0000000 [ 22.939765] USB Universal Host Controller Interface driver v3.0 [ 22.946632] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 22.953532] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 22.953540] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 22.960618] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 22.967503] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001800 [ 22.974540] usb usb1: configuration #1 chosen from 1 choice [ 22.981477] hub 1-0:1.0: USB hub found [ 22.988320] hub 1-0:1.0: 2 ports detected [ 23.095630] **** SET: Misaligned resource pointer: cf4f3c02 Type 07 Len 0 [ 23.103937] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 23.110791] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 23.117689] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.117697] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.124540] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 23.131384] uhci_hcd 0000:00:1d.1: irq 9, io base 0x00001820 [ 23.138329] usb usb2: configuration #1 chosen from 1 choice [ 23.145151] hub 2-0:1.0: USB hub found [ 23.151959] hub 2-0:1.0: 2 ports detected [ 23.259401] **** SET: Misaligned resource pointer: cf4f3d02 Type 07 Len 0 [ 23.267849] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 [ 23.274658] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 [ 23.281570] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.281578] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.288508] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 23.295415] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001840 [ 23.302388] usb usb3: configuration #1 chosen from 1 choice [ 23.309274] hub 3-0:1.0: USB hub found [ 23.316089] hub 3-0:1.0: 2 ports detected [ 23.423175] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) [ 23.430113] **** SET: Misaligned resource pointer: cff382e2 Type 07 Len 0 [ 23.438391] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 23.445206] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 23.452147] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 23.530922] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 23.716804] usb 2-1: configuration #1 chosen from 1 choice [ 23.966556] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 24.026538] intel8x0_measure_ac97_clock: measured 52457 usecs [ 24.033536] intel8x0: clocking to 48000 [ 24.150626] usb 3-1: configuration #1 chosen from 1 choice [ 24.257221] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 [ 24.264352] Yenta: CardBus bridge found at 0000:02:05.0 [104d:80e7] [ 24.296380] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI [ 24.303496] e100: Copyright(c) 1999-2005 Intel Corporation [ 24.406897] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9 [ 24.413893] Socket status: 30000006 [ 24.420837] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 24.427833] cs: IO port probe 0x4000-0x4fff: clean. [ 24.435270] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 24.442308] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff [ 24.450316] acpi_bus-0201 [01] bus_set_power : Device is not power manageable [ 24.457455] **** SET: Misaligned resource pointer: cf515ca2 Type 07 Len 0 [ 24.465863] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 [ 24.473011] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 24.502383] e100: eth0: e100_probe: addr 0xd0204000, irq 9, MAC addr 08:00:46:26:50:59 [ 24.509668] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 24.517039] Yenta: CardBus bridge found at 0000:02:05.1 [104d:80e7] [ 24.650695] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9 [ 24.658069] Socket status: 30000006 [ 24.665379] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 24.672771] cs: IO port probe 0x4000-0x4fff: clean. [ 24.680545] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 24.688072] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff [ 25.099689] input: Logitech USB Mouse as /class/input/input1 [ 25.114390] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 [ 25.121976] usbcore: registered new driver usbhid [ 25.129424] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 25.217824] SCSI subsystem initialized [ 25.275368] Initializing USB Mass Storage driver... [ 25.286225] scsi0 : SCSI emulation for USB Mass Storage devices [ 25.294165] usb-storage: device found at 2 [ 25.294169] usb-storage: waiting for device to settle before scanning [ 25.294185] usbcore: registered new driver usb-storage [ 25.302507] USB Mass Storage support registered. [ 25.435207] Vendor: Sony Model: MSC-U02 Rev: 1.00 [ 25.443398] Type: Direct-Access ANSI SCSI revision: 00 [ 25.460353] usb-storage: device scan complete [ 25.492546] SCSI device sda: 7904 512-byte hdwr sectors (4 MB) [ 25.501255] sda: Write Protect is off [ 25.508991] sda: Mode Sense: 00 6a 10 00 [ 25.508995] sda: assuming drive cache: write through [ 25.521716] SCSI device sda: 7904 512-byte hdwr sectors (4 MB) [ 25.530498] sda: Write Protect is off [ 25.538129] sda: Mode Sense: 00 6a 10 00 [ 25.538134] sda: assuming drive cache: write through [ 25.545770] sda: sda1 [ 25.586782] sd 0:0:0:0: Attached scsi removable disk sda [ 25.808408] Adding 248996k swap on /dev/hda2. Priority:-1 extents:1 across:248996k [ 26.050205] input: PC Speaker as /class/input/input2 [ 26.104604] speedstep: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of 500000 nSec. [ 26.137841] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 26.149857] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 26.163316] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 26.170087] sonypi: device allocated minor is 63 [ 26.191119] input: Sony Vaio Jogdial as /class/input/input3 [ 26.226397] input: Sony Vaio Keys as /class/input/input4 [ 26.281565] tun: Universal TUN/TAP device driver, 1.6 [ 26.292148] tun: (C) 1999-2004 Max Krasnyansky [ 26.320519] ACPI Sony Notebook Control Driver v0.2 successfully installed [ 26.347144] Real Time Clock Driver v1.12ac [ 26.392679] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2548b1, caps: 0x804753/0x0 [ 26.408654] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [ 26.434670] do_settimeofday() was called! [ 26.452811] do_settimeofday() was called! [ 26.623365] ReiserFS: hda3: found reiserfs format "3.6" with standard journal [ 26.643990] ReiserFS: hda3: using ordered data mode [ 26.650660] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 26.665746] ReiserFS: hda3: checking transaction log (hda3) [ 26.672893] ReiserFS: hda3: Using r5 hash to sort names [ 26.701880] SGI XFS with ACLs, security attributes, no debug enabled [ 26.710619] XFS mounting filesystem hda6 [ 26.721647] Ending clean XFS mount for filesystem: hda6 [ 27.245644] TSC clocksource: 994334 khz, rating=300 mult=4218204 shift=22 [ 27.465933] TSC clocksource: 994334 khz, rating=300 mult=4218204 shift=22 [ 27.681885] TSC clocksource: 994334 khz, rating=300 mult=4218204 shift=22 [ 27.897878] TSC clocksource: 994334 khz, rating=300 mult=4218204 shift=22 [ 28.190949] do_settimeofday() was called! [ 39.544076] TSC: Marked unstable [ 39.550209] [] show_trace+0x13/0x20 [ 39.556348] [] dump_stack+0x1e/0x20 [ 39.562434] [] mark_tsc_unstable+0x27/0x40 [ 39.568578] [] time_cpufreq_notifier+0x19b/0x1b0 [ 39.574709] [] notifier_call_chain+0x2d/0x50 [ 39.580821] [] cpufreq_notify_transition+0x13c/0x170 [ 39.586921] [] speedstep_target+0xd0/0xe0 [speedstep_ich] [ 39.593001] [] __cpufreq_driver_target+0x77/0x80 [ 39.599034] [] do_dbs_timer+0x13e/0x200 [cpufreq_ondemand] [ 39.605099] [] run_workqueue+0x9a/0x140 [ 39.611147] [] worker_thread+0x107/0x140 [ 39.617097] [] kthread+0xd9/0xe0 [ 39.622948] [] kernel_thread_helper+0x5/0x10 [ 243.600000] Time: acpi_pm clocksource has been installed. [ 246.108000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 246.236000] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 232 bytes per conntrack [ 246.636000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 252.524000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 556.512000] TSC: Marked unstable [ 556.512000] [] show_trace+0x13/0x20 [ 556.512000] [] dump_stack+0x1e/0x20 [ 556.512000] [] mark_tsc_unstable+0x27/0x40 [ 556.512000] [] time_cpufreq_notifier+0x19b/0x1b0 [ 556.512000] [] notifier_call_chain+0x2d/0x50 [ 556.512000] [] cpufreq_notify_transition+0xb1/0x170 [ 556.512000] [] speedstep_target+0xad/0xe0 [speedstep_ich] [ 556.512000] [] __cpufreq_driver_target+0x77/0x80 [ 556.512000] [] do_dbs_timer+0x1be/0x200 [cpufreq_ondemand] [ 556.512000] [] run_workqueue+0x9a/0x140 [ 556.512000] [] worker_thread+0x107/0x140 [ 556.512000] [] kthread+0xd9/0xe0 [ 556.512000] [] kernel_thread_helper+0x5/0x10 [ 556.532000] check_periodic_interval: Long interval! 135987395 ns. [ 556.532000] Something may be blocking interrupts. [ 563.016000] TSC: Marked unstable [ 563.016000] [] show_trace+0x13/0x20 [ 563.016000] [] dump_stack+0x1e/0x20 [ 563.016000] [] mark_tsc_unstable+0x27/0x40 [ 563.016000] [] time_cpufreq_notifier+0x19b/0x1b0 [ 563.016000] [] notifier_call_chain+0x2d/0x50 [ 563.016000] [] cpufreq_notify_transition+0x13c/0x170 [ 563.016000] [] speedstep_target+0xd0/0xe0 [speedstep_ich] [ 563.016000] [] __cpufreq_driver_target+0x77/0x80 [ 563.016000] [] do_dbs_timer+0x13e/0x200 [cpufreq_ondemand] [ 563.016000] [] run_workqueue+0x9a/0x140 [ 563.016000] [] worker_thread+0x107/0x140 [ 563.016000] [] kthread+0xd9/0xe0 [ 563.016000] [] kernel_thread_helper+0x5/0x10 [ 563.032000] check_periodic_interval: Long interval! 140156640 ns. [ 563.032000] Something may be blocking interrupts. [ 576.756000] Time: jiffies clocksource has been installed. [ 878.020000] TSC: Marked unstable [ 878.020000] [] show_trace+0x13/0x20 [ 878.020000] [] dump_stack+0x1e/0x20 [ 878.020000] [] mark_tsc_unstable+0x27/0x40 [ 878.020000] [] time_cpufreq_notifier+0x19b/0x1b0 [ 878.020000] [] notifier_call_chain+0x2d/0x50 [ 878.020000] [] cpufreq_notify_transition+0xb1/0x170 [ 878.020000] [] speedstep_target+0xad/0xe0 [speedstep_ich] [ 878.020000] [] __cpufreq_driver_target+0x77/0x80 [ 878.020000] [] do_dbs_timer+0x1be/0x200 [cpufreq_ondemand] [ 878.020000] [] run_workqueue+0x9a/0x140 [ 878.020000] [] worker_thread+0x107/0x140 [ 878.020000] [] kthread+0xd9/0xe0 [ 878.020000] [] kernel_thread_helper+0x5/0x10 [ 880.020000] TSC: Marked unstable [ 880.020000] [] show_trace+0x13/0x20 [ 880.020000] [] dump_stack+0x1e/0x20 [ 880.020000] [] mark_tsc_unstable+0x27/0x40 [ 880.020000] [] time_cpufreq_notifier+0x19b/0x1b0 [ 880.020000] [] notifier_call_chain+0x2d/0x50 [ 880.020000] [] cpufreq_notify_transition+0x13c/0x170 [ 880.020000] [] speedstep_target+0xd0/0xe0 [speedstep_ich] [ 880.020000] [] __cpufreq_driver_target+0x77/0x80 [ 880.020000] [] do_dbs_timer+0x13e/0x200 [cpufreq_ondemand] [ 880.020000] [] run_workqueue+0x9a/0x140 [ 880.020000] [] worker_thread+0x107/0x140 [ 880.020000] [] kthread+0xd9/0xe0 [ 880.020000] [] kernel_thread_helper+0x5/0x10 -- mattia :wq! - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/