Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Christophe Roullier <christophe.roullier@st.com>
To:     <wim@linux-watchdog.org>, <linux@roeck-us.net>,
        <mcoquelin.stm32@gmail.com>, <alexandre.torgue@st.com>
CC:     <linux-watchdog@vger.kernel.org>, <christophe.roullier@st.com>,
        <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
Date:   Fri, 22 Nov 2019 14:22:46 +0100
Message-ID: <20191122132246.8473-1-christophe.roullier@st.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

If the watchdog hardware is already enabled during the boot process,
when the Linux watchdog driver loads, it should start/reset the watchdog
and tell the watchdog framework. As a result, ping can be generated from
the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set),
until the userspace watchdog daemon takes over control

Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver")

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
Changes since v2:
According to Guenter
removed intermediate variable

I've tested some config and it is working as expected:
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE is not set + daemon watchdog in userland ON ==> No reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE is not set ==> Reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE=y ==> No reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON puis OFF ==> Reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE is not set ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON puis OFF ==> Reset IWDG2

Thanks,
Christophe

 drivers/watchdog/stm32_iwdg.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index a3a329011a06..25188d6bbe15 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -262,6 +262,24 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
 	watchdog_init_timeout(wdd, 0, dev);
 
+	/*
+	 * In case of CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set
+	 * (Means U-Boot/bootloaders leaves the watchdog running)
+	 * When we get here we should make a decision to prevent
+	 * any side effects before user space daemon will take care of it.
+	 * The best option, taking into consideration that there is no
+	 * way to read values back from hardware, is to enforce watchdog
+	 * being run with deterministic values.
+	 */
+	if (IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED)) {
+		ret = stm32_iwdg_start(wdd);
+		if (ret)
+			return ret;
+
+		/* Make sure the watchdog is serviced */
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
 	ret = devm_watchdog_register_device(dev, wdd);
 	if (ret)
 		return ret;
-- 
2.17.1