Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20191119202850.18149-1-c-robey@ti.com> <20191119202850.18149-2-c-robey@ti.com>
In-Reply-To: <20191119202850.18149-2-c-robey@ti.com>
From:   Jason Kridner <jkridner@gmail.com>
Date:   Fri, 22 Nov 2019 08:50:30 -0500
Message-ID: <CA+T6QPm-DNG_QoAMWw_zUDUkZCfhbBTgygnoPAykf3mgK7opaA@mail.gmail.com>
Subject: Re: [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
To:     Caleb Robey <c-robey@ti.com>
Cc:     OMAP List <linux-omap@vger.kernel.org>,
        Lokesh Vutla <lokeshvutla@ti.com>, Jason Kridner <jdk@ti.com>,
        Faiz Abbas <faiz_abbas@ti.com>,
        Andreas Dannenberg <dannenberg@ti.com>,
        Jean-Jacques Hiblot <jjhiblot@ti.com>,
        Praneeth Bajjuri <praneeth@ti.com>,
        "Andrew F . Davis" <afd@ti.com>,
        Grygorii Strashko <grygorii.strashko@ti.com>,
        Tom Rini <trini@konsulko.com>,
        Robert Nelson <robertcnelson@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        =?UTF-8?Q?Beno=C3=AEt_Cousson?= <bcousson@baylibre.com>,
        Tony Lindgren <tony@atomide.com>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, Nov 19, 2019 at 3:29 PM Caleb Robey <c-robey@ti.com> wrote:
>

[snip]

> diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
> new file mode 100644
> index 000000000000..7d0e132e6a23
> --- /dev/null
> +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
> @@ -0,0 +1,782 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +/dts-v1/;
> +
> +#include "dra74x.dtsi"
> +#include "am57xx-commercial-grade.dtsi"
> +#include "dra74x-mmc-iodelay.dtsi"
> +#include "dra74-ipu-dsp-common.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/dra.h>
> +
> +/ {
> +       model = "BeagleBoard.org BeagleBone AI";
> +       compatible = "beagleboard.org,am5729-beagleboneai", "ti,am5728",

Probably need to change "beagleboard.org," to "beagle," as of today.
With the new yaml stuff for defining device tree entries, having the
period (.) in the vendor identifier can be a bit confusing. I altered
my submission to avoid this.

> +                    "ti,dra742", "ti,dra74", "ti,dra7";
> +
> +       aliases {
> +               rtc0 = &tps659038_rtc;
> +               rtc1 = &rtc;
> +               display0 = &hdmi_conn;
> +       };
> +
> +       chosen {
> +               stdout-path = &uart1;
> +       };
> +
> +       memory@0 {
> +               device_type = "memory";
> +               reg = <0x0 0x80000000 0x0 0x40000000>;
> +       };
> +
> +       reserved-memory {
> +               #address-cells = <2>;
> +               #size-cells = <2>;
> +               ranges;
> +
> +               ipu2_memory_region: ipu2-memory@95800000 {
> +                       compatible = "shared-dma-pool";
> +                       reg = <0x0 0x95800000 0x0 0x3800000>;
> +                       reusable;
> +                       status = "okay";
> +               };
> +
> +               dsp1_memory_region: dsp1-memory@99000000 {
> +                       compatible = "shared-dma-pool";
> +                       reg = <0x0 0x99000000 0x0 0x4000000>;
> +                       reusable;
> +                       status = "okay";
> +               };
> +
> +               ipu1_memory_region: ipu1-memory@9d000000 {
> +                       compatible = "shared-dma-pool";
> +                       reg = <0x0 0x9d000000 0x0 0x2000000>;
> +                       reusable;
> +                       status = "okay";
> +               };
> +
> +               dsp2_memory_region: dsp2-memory@9f000000 {
> +                       compatible = "shared-dma-pool";
> +                       reg = <0x0 0x9f000000 0x0 0x800000>;
> +                       reusable;
> +                       status = "okay";
> +               };
> +
> +       };
> +
> +       vdd_adc: gpioregulator-vdd_adc {
> +               compatible = "regulator-gpio";
> +               regulator-name = "vdd_adc";
> +               vin-supply = <&vdd_5v>;
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <3300000>;
> +               regulator-always-on;
> +               regulator-boot-on;
> +               gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
> +               states = <1800000 0
> +                       3300000 1>;
> +       };
> +
> +       vdd_5v: fixedregulator-vdd_5v {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vdd_5v";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +               regulator-always-on;
> +               regulator-boot-on;
> +       };
> +
> +       vtt_fixed: fixedregulator-vtt {
> +               /* TPS51200 */
> +               compatible = "regulator-fixed";
> +               regulator-name = "vtt_fixed";
> +               vin-supply = <&vdd_ddr>;
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               regulator-always-on;
> +               regulator-boot-on;
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               led0 {
> +                       label = "beaglebone:green:usr0";
> +                       gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "heartbeat";
> +                       default-state = "off";
> +               };
> +
> +               led1 {
> +                       label = "beaglebone:green:usr1";
> +                       gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "mmc0";
> +                       default-state = "off";
> +               };
> +
> +               led2 {
> +                       label = "beaglebone:green:usr2";
> +                       gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "cpu";
> +                       default-state = "off";
> +               };
> +
> +               led3 {
> +                       label = "beaglebone:green:usr3";
> +                       gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "mmc1";
> +                       default-state = "off";
> +               };
> +
> +               led4 {
> +                       label = "beaglebone:green:usr4";
> +                       gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
> +                       linux,default-trigger = "netdev";
> +                       default-state = "off";
> +               };
> +       };
> +
> +       hdmi_conn: connector@0 {
> +               compatible = "hdmi-connector";
> +               label = "hdmi";
> +               type = "a";
> +
> +               port {
> +                       hdmi_connector_in: endpoint {
> +                               remote-endpoint = <&hdmi_encoder_out>;
> +                       };
> +               };
> +       };
> +
> +       hdmi_enc: encoder@0 {
> +               /* "ti,tpd12s016" software compatible with "ti,tpd12s015"
> +                *  no need for individual driver
> +                */
> +               compatible = "ti,tpd12s015";
> +               gpios = <0>,
> +                       <0>,
> +                       <&gpio7 12 GPIO_ACTIVE_HIGH>;
> +
> +               ports {
> +                       #address-cells = <0x1>;
> +                       #size-cells = <0x0>;
> +
> +                       port@0 {
> +                               reg = <0x0>;
> +
> +                               hdmi_encoder_in: endpoint@0 {
> +                                       remote-endpoint = <&hdmi_out>;
> +                               };
> +                       };
> +
> +                       port@1 {
> +                               reg = <0x1>;
> +
> +                               hdmi_encoder_out: endpoint@0 {
> +                                       remote-endpoint = <&hdmi_connector_in>;
> +                               };
> +                       };
> +               };
> +       };
> +
> +       emmc_pwrseq: emmc_pwrseq {
> +               compatible = "mmc-pwrseq-emmc";
> +               reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
> +       };
> +
> +       brcmf_pwrseq: brcmf_pwrseq {
> +               compatible = "mmc-pwrseq-simple";
> +               reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>,      /* BT-REG-ON */
> +                               <&gpio3 18 GPIO_ACTIVE_LOW>;    /* WL-REG-ON */
> +       };
> +
> +       extcon_usb1: extcon_usb1 {
> +               compatible = "linux,extcon-usb-gpio";
> +               ti,enable-id-detection;
> +               id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
> +       };
> +};
> +
> +&vip2 {
> +       status = "okay";
> +};
> +
> +&i2c1 {
> +       status = "okay";
> +       clock-frequency = <400000>;
> +
> +       tps659038: tps659038@58 {
> +               compatible = "ti,tps659038";
> +               reg = <0x58>;
> +               interrupt-parent = <&gpio6>;
> +               interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> +
> +               #interrupt-cells = <2>;
> +               interrupt-controller;
> +
> +               ti,system-power-controller;
> +               ti,palmas-override-powerhold;
> +
> +               tps659038_pmic {
> +                       compatible = "ti,tps659038-pmic";
> +
> +                       smps12-in-supply = <&vdd_5v>;
> +                       smps3-in-supply = <&vdd_5v>;
> +                       smps45-in-supply = <&vdd_5v>;
> +                       smps6-in-supply = <&vdd_5v>;
> +                       smps7-in-supply = <&vdd_5v>;
> +                       mps3-in-supply = <&vdd_5v>;
> +                       smps8-in-supply = <&vdd_5v>;
> +                       smps9-in-supply = <&vdd_5v>;
> +                       ldo1-in-supply = <&vdd_5v>;
> +                       ldo2-in-supply = <&vdd_5v>;
> +                       ldo3-in-supply = <&vdd_5v>;
> +                       ldo4-in-supply = <&vdd_5v>;
> +                       ldo9-in-supply = <&vdd_5v>;
> +                       ldoln-in-supply = <&vdd_5v>;
> +                       ldousb-in-supply = <&vdd_5v>;
> +                       ldortc-in-supply = <&vdd_5v>;
> +
> +                       regulators {
> +                               vdd_mpu: smps12 {
> +                                       /* VDD_MPU */
> +                                       regulator-name = "smps12";
> +                                       regulator-min-microvolt = <850000>;
> +                                       regulator-max-microvolt = <1250000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_ddr: smps3 {
> +                                       /* VDD_DDR EMIF1 EMIF2 */
> +                                       regulator-name = "smps3";
> +                                       regulator-min-microvolt = <1350000>;
> +                                       regulator-max-microvolt = <1350000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_dspeve: smps45 {
> +                                       /* VDD_DSPEVE on AM572 */
> +                                       regulator-name = "smps45";
> +                                       regulator-min-microvolt = < 850000>;
> +                                       regulator-max-microvolt = <1250000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_gpu: smps6 {
> +                                       /* VDD_GPU */
> +                                       regulator-name = "smps6";
> +                                       regulator-min-microvolt = < 850000>;
> +                                       regulator-max-microvolt = <1250000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_core: smps7 {
> +                                       /* VDD_CORE */
> +                                       regulator-name = "smps7";
> +                                       regulator-min-microvolt = < 850000>;    /*** 1.15V */
> +                                       regulator-max-microvolt = <1150000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_iva: smps8 {
> +                                       /* VDD_IVAHD */                         /*** 1.06V */
> +                                       regulator-name = "smps8";
> +                               };
> +
> +                               vdd_3v3: smps9 {
> +                                       /* VDD_3V3 */
> +                                       regulator-name = "smps9";
> +                                       regulator-min-microvolt = <3300000>;
> +                                       regulator-max-microvolt = <3300000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_sd: ldo1 {
> +                                       /* VDDSHV8 - VSDMMC  */
> +                                       regulator-name = "ldo1";
> +                                       regulator-min-microvolt = <1800000>;
> +                                       regulator-max-microvolt = <3300000>;
> +                                       regulator-boot-on;
> +                                       regulator-always-on;
> +                               };
> +
> +                               vdd_1v8: ldo2 {
> +                                       /* VDDSH18V */
> +                                       regulator-name = "ldo2";
> +                                       regulator-min-microvolt = <1800000>;
> +                                       regulator-max-microvolt = <1800000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_1v8_phy_ldo3: ldo3 {
> +                                       /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
> +                                       regulator-name = "ldo3";
> +                                       regulator-min-microvolt = <1800000>;
> +                                       regulator-max-microvolt = <1800000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_1v8_phy_ldo4: ldo4 {
> +                                       /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
> +                                       regulator-name = "ldo4";
> +                                       regulator-min-microvolt = <1800000>;
> +                                       regulator-max-microvolt = <1800000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               /* LDO5-8 unused */
> +
> +                               vdd_rtc: ldo9 {
> +                                       /* VDD_RTC  */
> +                                       regulator-name = "ldo9";
> +                                       regulator-min-microvolt = < 840000>;
> +                                       regulator-max-microvolt = <1160000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               vdd_1v8_pll: ldoln {
> +                                       /* VDDA_1V8_PLL */
> +                                       regulator-name = "ldoln";
> +                                       regulator-min-microvolt = <1800000>;
> +                                       regulator-max-microvolt = <1800000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               ldousb_reg: ldousb {
> +                                       /* VDDA_3V_USB: VDDA_USBHS33 */
> +                                       regulator-name = "ldousb";
> +                                       regulator-min-microvolt = <3300000>;
> +                                       regulator-max-microvolt = <3300000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               ldortc_reg: ldortc {
> +                                       /* VDDA_RTC  */
> +                                       regulator-name = "ldortc";
> +                                       regulator-min-microvolt = <1800000>;
> +                                       regulator-max-microvolt = <1800000>;
> +                                       regulator-always-on;
> +                                       regulator-boot-on;
> +                               };
> +
> +                               regen1: regen1 {
> +                                       /* VDD_3V3_ON */
> +                                       regulator-name = "regen1";
> +                                       regulator-boot-on;
> +                                       regulator-always-on;
> +                               };
> +
> +                               regen2: regen2 {
> +                                       /* Needed for PMIC internal resource */
> +                                       regulator-name = "regen2";
> +                                       regulator-boot-on;
> +                                       regulator-always-on;
> +                               };
> +                       };
> +               };
> +
> +               tps659038_rtc: tps659038_rtc {
> +                       compatible = "ti,palmas-rtc";
> +                       interrupt-parent = <&tps659038>;
> +                       interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
> +                       wakeup-source;
> +               };
> +
> +               tps659038_pwr_button: tps659038_pwr_button {
> +                       compatible = "ti,palmas-pwrbutton";
> +                       interrupt-parent = <&tps659038>;
> +                       interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> +                       wakeup-source;
> +                       ti,palmas-long-press-seconds = <12>;
> +               };
> +
> +               tps659038_gpio: tps659038_gpio {
> +                       compatible = "ti,palmas-gpio";
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +               };
> +       };
> +
> +       /* STMPE811 touch screen controller */
> +       stmpe811@41 {
> +               compatible = "st,stmpe811";
> +               reg = <0x41>;
> +               interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
> +               interrupt-parent = <&gpio2>;
> +               interrupt-controller;
> +               id = <0>;
> +               blocks = <0x5>;
> +               irq-trigger = <0x1>;
> +               st,mod-12b = <1>; /* 12-bit ADC */
> +               st,ref-sel = <0>; /* internal ADC reference */
> +               st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
> +               st,sample-time = <4>; /* ADC converstion time: 80 clocks */
> +
> +               stmpe_adc {
> +                       compatible = "st,stmpe-adc";
> +                       st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
> +                       adc0: iio-device@0 {
> +                               #io-channel-cells = <1>;
> +                               iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
> +                               iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
> +                                       "AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
> +                       };
> +               };
> +
> +               stmpe_touchscreen {
> +                       status = "disabled";
> +                       compatible = "st,stmpe-ts";
> +                       /* 8 sample average control */
> +                       st,ave-ctrl = <3>;
> +                       /* 7 length fractional part in z */
> +                       st,fraction-z = <7>;
> +                       /*
> +                        * 50 mA typical 80 mA max touchscreen drivers
> +                        * current limit value
> +                        */
> +                       st,i-drive = <1>;
> +                       /* 1 ms panel driver settling time */
> +                       st,settling = <3>;
> +                       /* 5 ms touch detect interrupt delay */
> +                       st,touch-det-delay = <5>;
> +               };
> +
> +               stmpe_gpio {
> +                       compatible = "st,stmpe-gpio";
> +               };
> +
> +               stmpe_pwm {
> +                       compatible = "st,stmpe-pwm";
> +                       #pwm-cells = <2>;
> +               };
> +       };
> +};
> +
> +&mcspi3 {
> +       status = "okay";
> +       ti,pindir-d0-out-d1-in;
> +
> +       sn65hvs882: sn65hvs882@0 {
> +               compatible = "pisosr-gpio";
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               reg = <0>;
> +               spi-max-frequency = <1000000>;
> +               spi-cpol;
> +       };
> +};
> +
> +&cpu0 {
> +       vdd-supply = <&vdd_mpu>;
> +       voltage-tolerance = <1>;
> +};
> +
> +&gpu {
> +       status = "ok";
> +};
> +
> +&pruss_soc_bus1 {
> +       status = "okay";
> +
> +       pruss1: pruss@4b200000 {
> +               status = "okay";
> +       };
> +};
> +
> +&pruss_soc_bus2 {
> +       status = "okay";
> +
> +       pruss2: pruss@4b280000 {
> +               status = "okay";
> +       };
> +};
> +
> +&pruss2_mdio {
> +       status = "okay";
> +};
> +
> +&uart1 {
> +       status = "okay";
> +};
> +
> +&davinci_mdio {
> +       reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
> +       reset-delay-us = <2>;
> +
> +       phy0: ethernet-phy@1 {
> +               reg = <4>;
> +               compatible = "ethernet-phy-id004d.d072",
> +                       "ethernet-phy-ieee802.3-c22";
> +               eee-broken-100tx;
> +               eee-broken-1000t;
> +       };
> +};
> +
> +&mac {
> +       slaves = <1>;
> +       status = "okay";
> +};
> +
> +&ocp {
> +       pruss1_shmem: pruss_shmem@4b200000 {
> +               status = "okay";
> +               compatible = "ti,pruss-shmem";
> +               reg = <0x4b200000 0x020000>;
> +       };
> +
> +       pruss2_shmem: pruss_shmem@4b280000 {
> +               status = "okay";
> +               compatible = "ti,pruss-shmem";
> +               reg = <0x4b280000 0x020000>;
> +       };
> +};
> +
> +&ipu2 {
> +       status = "okay";
> +       memory-region = <&ipu2_memory_region>;
> +};
> +
> +&ipu1 {
> +       status = "okay";
> +       memory-region = <&ipu1_memory_region>;
> +};
> +
> +&dsp1 {
> +       status = "okay";
> +       memory-region = <&dsp1_memory_region>;
> +};
> +
> +&dsp2 {
> +       status = "okay";
> +       memory-region = <&dsp2_memory_region>;
> +};
> +
> +&cpsw_emac0 {
> +       phy-handle = <&phy0>;
> +       phy-mode = "rgmii";
> +};
> +
> +&mmc1 {
> +       status = "okay";
> +       vmmc-supply = <&vdd_3v3>;
> +       vqmmc-supply = <&vdd_sd>;
> +       bus-width = <4>;
> +       cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc1_pins_default>;
> +};
> +
> +&mmc2 {
> +       status = "okay";
> +       vmmc-supply = <&vdd_1v8>;
> +       vqmmc-supply = <&vdd_1v8>;
> +       bus-width = <8>;
> +       ti,non-removable;
> +       non-removable;
> +       mmc-pwrseq = <&emmc_pwrseq>;
> +
> +       ti,needs-special-reset;
> +       dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
> +       dma-names = "tx", "rx";
> +
> +};
> +
> +&mmc4 {
> +       /* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
> +       /* HS: High speed up to 50 MHz (3.3 V signaling). */
> +       /* SDR12: SDR up to 25 MHz (1.8 V signaling). */
> +       /* SDR25: SDR up to 50 MHz (1.8 V signaling). */
> +       /* SDR50: SDR up to 100 MHz (1.8 V signaling). */
> +       /* SDR104: SDR up to 208 MHz (1.8 V signaling) */
> +       /* DDR50: DDR up to 50 MHz (1.8 V signaling). */
> +       status = "okay";
> +
> +       ti,needs-special-reset;
> +       vmmc-supply = <&vdd_3v3>;
> +       cap-power-off-card;
> +       keep-power-in-suspend;
> +       bus-width = <4>;
> +       ti,non-removable;
> +       non-removable;
> +       no-1-8-v;
> +       max-frequency = <24000000>;
> +
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       mmc-pwrseq = <&brcmf_pwrseq>;
> +
> +       brcmf: wifi@1 {
> +               status = "okay";
> +               reg = <1>;
> +               compatible = "brcm,bcm4329-fmac";
> +
> +               brcm,sd-head-align = <4>;
> +               brcm,sd_head_align = <4>;
> +               brcm,sd_sgentry_align = <512>;
> +
> +               interrupt-parent = <&gpio3>;
> +               interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
> +               interrupt-names = "host-wake";
> +       };
> +};
> +
> +&usb2_phy1 {
> +       phy-supply = <&ldousb_reg>;
> +};
> +
> +&usb2_phy2 {
> +       phy-supply = <&ldousb_reg>;
> +};
> +
> +&usb1 {
> +       status = "okay";
> +       dr_mode = "otg";
> +};
> +
> +&omap_dwc3_1 {
> +       extcon = <&extcon_usb1>;
> +};
> +
> +&usb2 {
> +       status = "okay";
> +       dr_mode = "host";
> +};
> +
> +&dss {
> +       status = "okay";
> +       vdda_video-supply = <&vdd_1v8_pll>;
> +};
> +
> +&hdmi {
> +       status = "okay";
> +       vdda-supply = <&vdd_1v8_phy_ldo4>;
> +
> +       port {
> +               hdmi_out: endpoint {
> +                       remote-endpoint = <&hdmi_encoder_in>;
> +               };
> +       };
> +};
> +
> +&bandgap {
> +       status = "okay";
> +};
> +
> +&mailbox1 {
> +       status = "okay";
> +};
> +
> +&mailbox2 {
> +       status = "okay";
> +};
> +
> +&mailbox3 {
> +       status = "okay";
> +};
> +
> +&mailbox4 {
> +       status = "okay";
> +};
> +
> +&mailbox5 {
> +       status = "okay";
> +};
> +
> +&mailbox6 {
> +       status = "okay";
> +};
> +
> +&mailbox7 {
> +       status = "okay";
> +};
> +
> +&mailbox8 {
> +       status = "okay";
> +};
> +
> +&mailbox9 {
> +       status = "okay";
> +};
> +
> +&mailbox10 {
> +       status = "okay";
> +};
> +
> +&mailbox11 {
> +       status = "okay";
> +};
> +
> +&mailbox12 {
> +       status = "okay";
> +};
> +
> +&mailbox13 {
> +       status = "okay";
> +};
> +
> +&cpu_alert0 {
> +       temperature = <55000>; /* milliCelsius */
> +};
> +
> +&cpu_crit {
> +       temperature = <85000>; /* milliCelsius */
> +};
> +
> +&gpu_crit {
> +       temperature = <85000>; /* milliCelsius */
> +};
> +
> +&core_crit {
> +       temperature = <85000>; /* milliCelsius */
> +};
> +
> +&dspeve_crit {
> +       temperature = <85000>; /* milliCelsius */
> +};
> +
> +&iva_crit {
> +       temperature = <85000>; /* milliCelsius */
> +};
> +
> +&sata {
> +       status = "disabled";
> +};
> +
> +&sata_phy {
> +       status = "disabled";
> +};
> +
> +/* bluetooth */
> +&uart6 {
> +       status = "okay";
> +};
> +
> +/* cape header stuff */
> +&i2c4 {
> +       status = "okay";
> +       clock-frequency = <100000>;
> +};
> +
> +&cpu0_opp_table {
> +       opp_slow-500000000 {
> +               opp-shared;
> +       };
> +};
> --
> 2.17.1
>


-- 
https://beagleboard.org/about