Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 27 Nov 2019 18:19:08 +0100
From:   Paul Cercueil <paul@crapouillou.net>
Subject: Re: [PATCH 4/5] dt-bindings: clock: Add USB OTG clock for X1000.
To:     Zhou Yanjie <zhouyanjie@zoho.com>
Cc:     linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
        robh+dt@kernel.org, paul.burton@mips.com, paulburton@kernel.org,
        mturquette@baylibre.com, sboyd@kernel.org, mark.rutland@arm.com,
        syq@debian.org, sernia.zhou@foxmail.com, zhenwenjin@gmail.com
Message-Id: <1574875148.3.3@crapouillou.net>
In-Reply-To: <1574825576-91028-5-git-send-email-zhouyanjie@zoho.com>
References: <1574825576-91028-1-git-send-email-zhouyanjie@zoho.com>
        <1574825576-91028-5-git-send-email-zhouyanjie@zoho.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Zhou,


Le mer., nov. 27, 2019 at 11:32, Zhou Yanjie <zhouyanjie@zoho.com> a=20
=E9crit :
> Add the USB OTC clock bindings for the X1000 Soc from Ingenic.
>=20
> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
> ---
>  include/dt-bindings/clock/x1000-cgu.h | 23 ++++++++++++-----------
>  1 file changed, 12 insertions(+), 11 deletions(-)
>=20
> diff --git a/include/dt-bindings/clock/x1000-cgu.h=20
> b/include/dt-bindings/clock/x1000-cgu.h
> index bbaebaf..c401fce 100644
> --- a/include/dt-bindings/clock/x1000-cgu.h
> +++ b/include/dt-bindings/clock/x1000-cgu.h
> @@ -29,16 +29,17 @@
>  #define X1000_CLK_MSCMUX	14
>  #define X1000_CLK_MSC0		15
>  #define X1000_CLK_MSC1		16
> -#define X1000_CLK_SSIPLL	17
> -#define X1000_CLK_SSIMUX	18
> -#define X1000_CLK_SFC		19
> -#define X1000_CLK_I2C0		20
> -#define X1000_CLK_I2C1		21
> -#define X1000_CLK_I2C2		22
> -#define X1000_CLK_UART0		23
> -#define X1000_CLK_UART1		24
> -#define X1000_CLK_UART2		25
> -#define X1000_CLK_SSI		26
> -#define X1000_CLK_PDMA		27

You can't do that. These macros are ABI now, since they are used in the=20
devicetree. Just use the next valid number for your OTG clock.

Cheers,
-Paul

> +#define X1000_CLK_OTG		17
> +#define X1000_CLK_SSIPLL	18
> +#define X1000_CLK_SSIMUX	19
> +#define X1000_CLK_SFC		20
> +#define X1000_CLK_I2C0		21
> +#define X1000_CLK_I2C1		22
> +#define X1000_CLK_I2C2		23
> +#define X1000_CLK_UART0		24
> +#define X1000_CLK_UART1		25
> +#define X1000_CLK_UART2		26
> +#define X1000_CLK_SSI		27
> +#define X1000_CLK_PDMA		28
>=20
>  #endif /* __DT_BINDINGS_CLOCK_X1000_CGU_H__ */
> --
> 2.7.4
>=20
>=20

=