Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932492AbWASQ6Z (ORCPT ); Thu, 19 Jan 2006 11:58:25 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932285AbWASQ6Z (ORCPT ); Thu, 19 Jan 2006 11:58:25 -0500 Received: from mtl.rackplans.net ([65.39.167.249]:57731 "HELO innerfire.net") by vger.kernel.org with SMTP id S932492AbWASQ6Z (ORCPT ); Thu, 19 Jan 2006 11:58:25 -0500 Date: Thu, 19 Jan 2006 11:53:08 -0500 (EST) From: Gerhard Mack To: linux-kernel@vger.kernel.org Subject: oops in 2.6.15.1 x86_64/ipv6 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 16516 Lines: 357 The system is a dual 3ghz Xeon blade running an amd64 install of debian with the kernel upgraded to 2.6.15.1. The crash happened when I did an ifconfig eth0:1" to bring up a local ipv4 network address. The system does not have any configured ipv6 addresses. The boot messages are included below the opps. Let me know if I can provide any more info. Gerhard Unable to handle kernel paging request at ffff81007cb2adc0 RIP: [] PGD 8063 PUD a063 PMD 800000007ca001e3 PTE dfdfdfdfdfdfdfdf Oops: 0011 [1] PREEMPT SMP CPU 3 Modules linked in: ipv6 Pid: 1890, comm: modprobe Not tainted 2.6.15.1 #3 RIP: 0010:[] [] RSP: 0000:ffff81007cea1f10 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff81007f913000 RCX: 0000000000000240 RDX: ffff81007f913000 RSI: 0000000000000005 RDI: ffffffff88033c40 RBP: ffffffff88033c40 R08: 0000000000000000 R09: 0000024000000000 R10: 0000000000000000 R11: ffff81007d281000 R12: 0000000000000000 R13: 0000000000527d28 R14: 0000000000000000 R15: 0000000000527d60 FS: 00002aaaaae00640(0000) GS:ffffffff80415980(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff81007cb2adc0 CR3: 000000007d1ed000 CR4: 00000000000006e0 Process modprobe (pid: 1890, threadinfo ffff81007cea0000, task ffff81007c834300) Stack: ffffffff802a5d7e 0000000000000000 ffffffff88035e00 ffffffff80379040 ffffffff8803a4f8 ffffffff88011885 0000000000000202 0000000000000000 ffffffff8803a13e ffffffff80379080 Call Trace:{register_netdevice_notifier+60} {:ipv6:ndisc_init+190} {:ipv6:ndisc_ifinfo_sysctl_strategy+0} {:ipv6:inet6_init+204} {sys_init_module+247} {system_call+126} Code: 2c 02 00 f0 0b 00 00 00 50 ae b2 7c 00 81 ff ff 24 81 00 00 RIP [] RSP CR2: ffff81007cb2adc0 Bootdata ok (command line is root=/dev/sda2 ro console=tty0 ) Linux version 2.6.15.1 (root@relich132) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #3 SMP PREEMPT Thu Jan 19 04:34:47 HAST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data) BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved) BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) ACPI: RSDP (v000 DELL ) @ 0x00000000000fd650 ACPI: RSDT (v001 DELL PE1855 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd664 ACPI: FADT (v001 DELL PE1855 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd6b0 ACPI: MADT (v001 DELL PE1855 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd724 ACPI: SPCR (v001 DELL PE1855 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7c0 ACPI: HPET (v001 DELL PE1855 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd810 ACPI: MCFG (v001 DELL PE1855 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd848 ACPI: DSDT (v001 DELL PE1855 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 516103 DMA zone: 3086 pages, LIFO batch:0 DMA32 zone: 513017 pages, LIFO batch:31 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec84000] gsi_base[32]) IOAPIC[1]: apic_id 9, version 32, address 0xfec84000, GSI 32-55 ACPI: IOAPIC (id[0x0a] address[0xfec84800] gsi_base[64]) IOAPIC[2]: apic_id 10, version 32, address 0xfec84800, GSI 64-87 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ffff000:60001000) Checking aperture... Built 1 zonelists Kernel command line: root=/dev/sda2 ro console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 14.318180 MHz HPET timer. time.c: Detected 3000.196 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2060828k/2096896k available (2043k kernel code, 35492k reserved, 883k data, 176k init) Calibrating delay using timer specific routine.. 6004.38 BogoMIPS (lpj=3002194) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.36 BogoMIPS (lpj=3000184) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 3 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 APIC error on CPU1: 00(40) CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 1313 cycles) Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.18 BogoMIPS (lpj=3000090) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 APIC error on CPU2: 00(40) CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -173 cycles, maxerr 915 cycles) Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.18 BogoMIPS (lpj=3000092) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 3 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 03 APIC error on CPU3: 00(40) CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 1335 cycles) Brought up 4 CPUs time.c: Using HPET/TSC based timekeeping. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:06:0d.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBLO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCLO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCLO.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCLO.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PICH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *15 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12) *14 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.0 IO window: e000-efff MEM window: dfd00000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:03:00.2 IO window: d000-dfff MEM window: dfb00000-dfcfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: d000-efff MEM window: df900000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: df700000-df8fffff PREFETCH window: d0000000-d7ffffff GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Setting latency timer of device 0000:03:00.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 IA-32 Microcode Update Driver: v1.14 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Intel E7520/7320/7525 detected.<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[pcie00] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 Allocate Port Service[pcie00] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: Power Button (FF) [PWRF] Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 68 (level, low) -> IRQ 17 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:05:04.1[B] -> GSI 69 (level, low) -> IRQ 18 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection Fusion MPT base driver 3.03.04 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.04 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 42 (level, low) -> IRQ 19 mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} scsi0 : ioc0: LSI53C1030, FwRev=01032397h, Ports=1, MaxQ=222, IRQ=19 Vendor: SEAGATE Model: ST373307LC Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB) SCSI device sda: drive cache: write back SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda Vendor: SEAGATE Model: ST373307LC Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdb: 143374744 512-byte hdwr sectors (73408 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 143374744 512-byte hdwr sectors (73408 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 0:0:1:0: Attached scsi disk sdb Vendor: SDR Model: GEM318P Rev: 1 Type: Processor ANSI SCSI revision: 02 Fusion MPT misc device (ioctl) driver 3.03.04 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) usbmon: debugfs is not available GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdff00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected 116x: driver isp116x-hcd, 05 Aug 2005 USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bce0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bcc0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 input: AT Translated Set 2 keyboard as /class/input/input0 ReiserFS: sda2: found reiserfs format "3.6" with standard journal input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: replayed 28 transactions in 6 seconds ReiserFS: sda2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 176k freed Adding 192740k swap on /dev/sdb1. Priority:-1 extents:1 across:192740k ReiserFS: sdb2: found reiserfs format "3.6" with standard journal ReiserFS: sdb2: using ordered data mode ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb2: checking transaction log (sdb2) ReiserFS: sdb2: Using r5 hash to sort names e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex NET: Registered protocol family 10 -- Gerhard Mack gmack@innerfire.net <>< As a computer I find your faith in technology amusing. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/