Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Tue, 10 Dec 2019 13:52:30 -0600
From:   Bin Liu <b-liu@ti.com>
To:     Paul Cercueil <paul@crapouillou.net>
CC:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>, <od@zcrc.me>,
        <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 7/7] usb: musb: jz4740: Disable pullup at init
Message-ID: <20191210195230.GA16429@iaqt7>
Mail-Followup-To: Bin Liu <b-liu@ti.com>,
        Paul Cercueil <paul@crapouillou.net>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>, od@zcrc.me,
        linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20191210171110.62141-1-paul@crapouillou.net>
 <20191210171110.62141-7-paul@crapouillou.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <20191210171110.62141-7-paul@crapouillou.net>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

On Tue, Dec 10, 2019 at 06:11:10PM +0100, Paul Cercueil wrote:
> The pullup may be already enabled before the driver is initialized.
> It has to be disabled at init time, as we cannot guarantee that a gadget
> driver will be bound to the UDC.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> 
> Notes:
>     v3: New patch
> 
>  drivers/usb/musb/jz4740.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
> index f948eca654f3..1af9e4053312 100644
> --- a/drivers/usb/musb/jz4740.c
> +++ b/drivers/usb/musb/jz4740.c
> @@ -75,6 +75,7 @@ static const struct musb_hdrc_config jz4740_musb_config = {
>  static int jz4740_musb_init(struct musb *musb)
>  {
>  	struct device *dev = musb->controller->parent;
> +	u8 power;
>  	int err;
>  
>  	if (dev->of_node)
> @@ -97,6 +98,14 @@ static int jz4740_musb_init(struct musb *musb)
>  	musb->isr = jz4740_musb_interrupt;
>  	musb->dma_share_usb_irq = true;
>  
> +	/*
> +	 * If the SoC booted from USB the pullup might still be set.
> +	 * Disable it until a gadget is bound.
> +	 */
> +	power = musb_readb(musb->mregs, MUSB_POWER);
> +	power &= ~MUSB_POWER_SOFTCONN;
> +	musb_writeb(musb->mregs, MUSB_POWER, power);
> +
>  	return 0;
>  }

It is preferred the glue drivers don't touch the controller core
registers if possible. Please try the following patch instead.

-Bin.

------------- >8 ------------
t a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 683b719c5026..2f9105e8ea38 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2317,6 +2317,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
        musb_disable_interrupts(musb);
        musb_writeb(musb->mregs, MUSB_DEVCTL, 0);

+       /* MUSB_POWER_SOFTCONN might be already set, jz4740 does this. */
+       musb_writeb(musb->mregs, MUSB_POWER, 0);
+
        /* Init IRQ workqueue before request_irq */
        INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
        INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);