Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932293AbWAUAUH (ORCPT ); Fri, 20 Jan 2006 19:20:07 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932298AbWAUAUH (ORCPT ); Fri, 20 Jan 2006 19:20:07 -0500 Received: from relay02.pair.com ([209.68.5.16]:57613 "HELO relay02.pair.com") by vger.kernel.org with SMTP id S932293AbWAUAUE (ORCPT ); Fri, 20 Jan 2006 19:20:04 -0500 X-pair-Authenticated: 67.163.102.102 From: Chase Venters Organization: Clientec, Inc. To: Andrew Morton Subject: Re: OOM Killer killing whole system Date: Fri, 20 Jan 2006 18:19:35 -0600 User-Agent: KMail/1.9 Cc: Anton Titov , linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org References: <1137337516.11767.50.camel@localhost> <1137793685.11771.58.camel@localhost> <20060120145006.0a773262.akpm@osdl.org> In-Reply-To: <20060120145006.0a773262.akpm@osdl.org> MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_E5X0D+U2UprzUHi" Message-Id: <200601201819.58366.chase.venters@clientec.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 32462 Lines: 780 --Boundary-00=_E5X0D+U2UprzUHi Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Friday 20 January 2006 16:49, Andrew Morton wrote: > This is 2.6.15 and we have a deadly bug in scsi. > > Next time you reboot 2.6.15 on that machine can you please send the output > of `dmesg -s 1000000'? You might have to set CONFIG_LOG_BUF_SHIFT=17 to > prevent it from being truncated. Here's mine (attached). Curious - the -s... were you expecting the ring buffer to exceed 16384? I don't think my (boot time) buffer does. Thanks, Chase --Boundary-00=_E5X0D+U2UprzUHi Content-Type: text/plain; charset="iso-8859-1"; name="dmesg" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg" Linux version 2.6.15-ck1 (root@turbotaz) (gcc version 3.3.6 (Gentoo 3.3.6, = ssp-3.3.6-1.0, pie-8.7.8)) #1 SMP PREEMPT Tue Jan 10 12:42:28 CST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 1023MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 262064 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 257968 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: DELUXE APIC at: 0xFEE00000 Processor #0 15:4 APIC version 20 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000) Built 1 zonelists Kernel command line: root=3D/dev/md1 noapic acpi=3Doff console=3DttyS0,3840= 0n8 console=3Dtty0 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 CPU 0 irqstacks, hard=3Db0791000 soft=3Db078f000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3212.427 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1030612k/1048256k available (4837k kernel code, 17088k reserved, 15= 97k data, 256k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6429.43 BogoMIPS (lpj=3D32= 14717) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000= 441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004= 41d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00= 000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 Total of 1 processors activated (6429.43 BogoMIPS). Brought up 1 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3D4 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled Generic PHY: Registered new driver SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:04:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus ff [IRQ] PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:01.0 doesn't match PIRQ mask - try pci=3Dusep= irqmask PCI: Found IRQ 10 for device 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1d.3 PCI: Sharing IRQ 10 with 0000:04:00.0 PCI: IRQ 0 for device 0000:00:1c.1 doesn't match PIRQ mask - try pci=3Dusep= irqmask PCI: Found IRQ 5 for device 0000:00:1c.1 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:01:09.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=3Dusep= irqmask PCI: Found IRQ 5 for device 0000:00:1f.1 PCI: Sharing IRQ 5 with 0000:00:1d.2 PCI: Sharing IRQ 5 with 0000:01:09.2 PCI: IRQ 0 for device 0000:00:1f.3 doesn't match PIRQ mask - try pci=3Dusep= irqmask PCI: Found IRQ 3 for device 0000:00:1f.3 PCI: Sharing IRQ 3 with 0000:00:1d.1 PCI: Sharing IRQ 3 with 0000:00:1f.2 PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: cdf00000-cfffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: d000-dfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: c000-cfff MEM window: cde00000-cdefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: a000-bfff MEM window: cdd00000-cddfffff PREFETCH window: 50000000-500fffff PCI: Found IRQ 10 for device 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1d.3 PCI: Sharing IRQ 10 with 0000:04:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Found IRQ 10 for device 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:00:1d.3 PCI: Sharing IRQ 10 with 0000:04:00.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Found IRQ 5 for device 0000:00:1c.1 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:01:09.0 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 audit: initializing netlink socket (disabled) audit(1137716093.984:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). fuse init (API version 7.3) JFS: nTxBlock =3D 8052, nTxLock =3D 64423 SGI XFS with ACLs, security attributes, large block numbers, no debug enabl= ed SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered 0000:00:1d.0: uhci_check_and_reset_hc: legsup =3D 0x0f30 0000:00:1d.0: Performing full reset 0000:00:1d.1: uhci_check_and_reset_hc: legsup =3D 0x0030 0000:00:1d.1: Performing full reset 0000:00:1d.2: uhci_check_and_reset_hc: legsup =3D 0x0030 0000:00:1d.2: Performing full reset 0000:00:1d.3: uhci_check_and_reset_hc: legsup =3D 0x0030 0000:00:1d.3: Performing full reset 0000:00:1d.7 EHCI: early BIOS handoff failed (BIOS bug ?) PCI: Found IRQ 10 for device 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1d.3 PCI: Sharing IRQ 10 with 0000:04:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] PCI: Found IRQ 10 for device 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:00:1d.3 PCI: Sharing IRQ 10 with 0000:04:00.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] PCI: Found IRQ 5 for device 0000:00:1c.1 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:01:09.0 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 hw_random: RNG not detected [drm] Initialized drm 1.0.0 20040925 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A =46loppy drive(s): fd0 is 1.44M =46DC 0 is a post-1991 82077 pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com Marvell 88E1101: Registered new driver Davicom DM9161E: Registered new driver Davicom DM9131: Registered new driver Cicada Cis8204: Registered new driver LXT970: Registered new driver LXT971: Registered new driver QS6612: Registered new driver Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH6: IDE controller at PCI slot 0000:00:1f.1 PCI: Found IRQ 5 for device 0000:00:1f.1 PCI: Sharing IRQ 5 with 0000:00:1d.2 PCI: Sharing IRQ 5 with 0000:01:09.2 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... IT8212: IDE controller at PCI slot 0000:01:04.0 PCI: Found IRQ 11 for device 0000:01:04.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:1d.7 IT8212: chipset revision 19 it821x: controller in pass through mode. IT8212: 100% native mode on irq 11 ide2: BM-DMA at 0xa880-0xa887, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xa888-0xa88f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 PCI: Found IRQ 11 for device 0000:01:0a.0 PCI: Sharing IRQ 11 with 0000:01:03.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7850: Ultra Single Channel A, SCSI Id=3D7, 3/253 SCBs Vendor: PLEXTOR Model: CD-R PX-W124TS Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 target0:0:4: Beginning Domain Validation target0:0:4: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 8) target0:0:4: Domain Validation skipping write tests target0:0:4: Ending Domain Validation libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 PCI: Found IRQ 3 for device 0000:00:1f.2 PCI: Sharing IRQ 3 with 0000:00:1d.1 PCI: Sharing IRQ 3 with 0000:00:1f.3 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x9C00 ctl 0x9882 bmdma 0x9400 irq 3 ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9482 bmdma 0x9408 irq 3 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3e01 87:4003 88:= 203f ata1: dev 0 ATA-6, max UDMA/100, 625142448 sectors: LBA48 ata1: dev 1 cfg 49:2f00 82:306b 83:7e01 84:4003 85:3069 86:3c01 87:4003 88:= 203f ata1: dev 1 ATA-6, max UDMA/100, 625142448 sectors: LBA48 ata1: dev 0 configured for UDMA/100 ata1: dev 1 configured for UDMA/100 scsi1 : ata_piix ata2: dev 0 cfg 49:2f00 82:306b 83:7e01 84:4003 85:3069 86:3c01 87:4003 88:= 203f ata2: dev 0 ATA-6, max UDMA/100, 625142448 sectors: LBA48 ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:= 203f ata2: dev 1 ATA-6, max UDMA/100, 625142448 sectors: LBA48 ata2: dev 0 configured for UDMA/100 ata2: dev 1 configured for UDMA/100 scsi2 : ata_piix Vendor: ATA Model: WDC WD3200JD-98K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD3200JD-60K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD3200JD-60K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 1:0:0:0: Attached scsi disk sda SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sd 1:0:1:0: Attached scsi disk sdb SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sdc2 sdc3 sd 2:0:0:0: Attached scsi disk sdc SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 sdd3 sd 2:0:1:0: Attached scsi disk sdd sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray sr 0:0:4:0: Attached scsi CD-ROM sr0 sr 0:0:4:0: Attached scsi generic sg0 type 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:1:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: Attached scsi generic sg3 type 0 sd 2:0:1:0: Attached scsi generic sg4 type 0 ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 PCI: Found IRQ 11 for device 0000:00:1d.7 PCI: Sharing IRQ 11 with 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:01:04.0 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=3D1 cc=3D4 pcc=3D2 ord= ered !ppc ports=3D8 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit a= ddr ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: capability 1000001 at 68 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xcdcff800 ehci_hcd 0000:00:1d.7: reset command 080012 (park)=3D0 ithresh=3D8 Periodic= period=3D1024 Reset HALT ehci_hcd 0000:00:1d.7: init command 010001 (park)=3D0 ithresh=3D1 period=3D= 1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.15-ck1 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0000 drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=3Dj CSC CON= NECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s USB Universal Host Controller Interface driver v2.3 PCI: Found IRQ 11 for device 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:1d.7 PCI: Sharing IRQ 11 with 0000:01:04.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.0: Performing full reset drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00008880 usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb2: Product: UHCI Host Controller hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 usb usb2: Manufacturer: Linux 2.6.15-ck1 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good ehci_hcd 0000:00:1d.7: port 2 high speed ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=3Dse0 PE CO= NNECT usb 1-2: new high speed USB device using ehci_hcd and address 2 drivers/usb/core/inode.c: creating file '001' PCI: Found IRQ 3 for device 0000:00:1d.1 PCI: Sharing IRQ 3 with 0000:00:1f.2 PCI: Sharing IRQ 3 with 0000:00:1f.3 ehci_hcd 0000:00:1d.7: port 2 high speed ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001005 POWER sig=3Dse0 PE CO= NNECT PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.1: Performing full reset drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 3, io base 0x00008c00 usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.15-ck1 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good usb 1-2: default language 0x0409 usb 1-2: new device strings: Mfr=3D0, Product=3D1, SerialNumber=3D0 usb 1-2: Product: USB2.0 Hub usb 1-2: hotplug usb 1-2: adding 1-2:1.0 (config #1, interface 0) usb 1-2:1.0: hotplug hub 1-2:1.0: usb_probe_interface hub 1-2:1.0: usb_probe_interface - got id hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected hub 1-2:1.0: standalone hub hub 1-2:1.0: individual port power switching hub 1-2:1.0: individual port over-current protection hub 1-2:1.0: Single TT hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns) hub 1-2:1.0: Port indicators are supported hub 1-2:1.0: power on to power good time: 100ms hub 1-2:1.0: local power source is good hub 1-2:1.0: enabling power on all ports drivers/usb/core/inode.c: creating file '001' PCI: Found IRQ 5 for device 0000:00:1d.2 PCI: Sharing IRQ 5 with 0000:00:1f.1 PCI: Sharing IRQ 5 with 0000:01:09.2 usb 1-2: link qh256-0001/efad5100 start 255 [1/0 us] drivers/usb/core/inode.c: creating file '002' ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001403 POWER sig=3Dk CSC CON= NECT hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.2: Performing full reset drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 5, io base 0x00009000 usb usb4: default language 0x0409 usb usb4: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.15-ck1 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: hotplug usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: hotplug hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:1d.7: port 5 low speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=3Dse0= CSC hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0000 hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:1d.0: port 2 portsc 0082,00 hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s drivers/usb/core/inode.c: creating file '001' PCI: Found IRQ 10 for device 0000:00:1d.3 PCI: Sharing IRQ 10 with 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:04:00.0 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd =3D 0x0000 uhci_hcd 0000:00:1d.3: Performing full reset drivers/usb/core/inode.c: creating file '005' uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 10, io base 0x00009080 hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 1-2:1.0: state 5 ports 4 chg 0000 evt 0018 usb usb5: default language 0x0409 usb usb5: new device strings: Mfr=3D3, Product=3D2, SerialNumber=3D1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.15-ck1 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb usb5: hotplug usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: hotplug hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 1-2:1.0: port 3, status 0301, change 0001, 1.5 Mb/s hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good drivers/usb/core/inode.c: creating file '001' hub 1-2:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 usb 1-2.3: new low speed USB device using ehci_hcd and address 4 usb 1-2.3: skipped 1 descriptor after interface usb 1-2.3: default language 0x0409 usb 1-2.3: new device strings: Mfr=3D4, Product=3D26, SerialNumber=3D0 usb 1-2.3: Product: Keytronic USB Keyboard usb 1-2.3: Manufacturer: Key Tronic usb 1-2.3: hotplug usb 1-2.3: adding 1-2.3:1.0 (config #1, interface 0) usb 1-2.3:1.0: hotplug usb 1-2.3: wrong descriptor type 00 for string 20 ("ic?Keytronic USB Keyboa= rd?1234???????????????????????=A9") drivers/usb/core/inode.c: creating file '004' hub 1-2:1.0: port 4, status 0301, change 0001, 1.5 Mb/s hub 1-2:1.0: debounce: port 4: total 100ms stable 100ms status 0x301 usb 1-2.4: new low speed USB device using ehci_hcd and address 5 usb 1-2.4: skipped 1 descriptor after interface usb 1-2.4: default language 0x0409 usb 1-2.4: new device strings: Mfr=3D0, Product=3D1, SerialNumber=3D0 usb 1-2.4: Product: USB Mouse usb 1-2.4: hotplug usb 1-2.4: adding 1-2.4:1.0 (config #1, interface 0) usb 1-2.4:1.0: hotplug drivers/usb/core/inode.c: creating file '005' hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:1d.2: port 1 portsc 01a3,00 hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver uhci_hcd 0000:00:1d.1: suspend_rh (auto-stop) Initializing USB Mass Storage driver... hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 usb 4-1: new low speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.0: suspend_rh (auto-stop) usb 4-1: skipped 1 descriptor after interface usb 4-1: default language 0x0409 usb 4-1: new device strings: Mfr=3D3, Product=3D1, SerialNumber=3D2 usb 4-1: Product: Back-UPS RS 1000 FW:7.g8 .D USB FW:g8=20 uhci_hcd 0000:00:1d.3: suspend_rh (auto-stop) usb 4-1: Manufacturer: American Power Conversion usb 4-1: SerialNumber: QB0507149462 =20 usb 4-1: hotplug usb 4-1: adding 4-1:1.0 (config #1, interface 0) usb 4-1:1.0: hotplug drivers/usb/core/inode.c: creating file '002' hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 1-2:1.0: state 5 ports 4 chg 0000 evt 0010 usbcore: registered new driver usb-storage hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0002 USB Mass Storage support registered. usbcore: registered new driver ati_remote drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote= Control v. 2.2.1 usbcore: registered new driver hiddev usbhid 1-2.3:1.0: usb_probe_interface usbhid 1-2.3:1.0: usb_probe_interface - got id input: Key Tronic Keytronic USB Keyboard as /class/input/input0 usb 1-2.3: link qh8-0601/efad5280 start 7 [1/2 us] input: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-00= 00:00:1d.7-2.3 usbhid 1-2.4:1.0: usb_probe_interface usbhid 1-2.4:1.0: usb_probe_interface - got id input: USB Mouse as /class/input/input1 input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.7-2.4 usbhid 4-1:1.0: usb_probe_interface usbhid 4-1:1.0: usb_probe_interface - got id drivers/usb/core/file.c: looking for a minor, starting at 0 hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 F= W:7.g8 .D USB FW:g8 ] on usb-0000:00:1d.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core gameport: EMU10K1 is pci0000:01:09.1/gameport0, io 0xbc00, speed 932kHz mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input2 I2O subsystem v1.288 i2o: max drivers =3D 8 I2O Configuration OSM v1.248 I2O Bus Adapter OSM v$Rev$ I2O Block Device OSM v1.287 I2O SCSI Peripheral OSM v1.282 I2O ProcFS OSM v1.145 i2c /dev entries driver md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid10 personality registered as nr 9 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 4744.000 MB/sec raid5: using function: pIII_sse (4744.000 MB/sec) raid6: int32x1 921 MB/s raid6: int32x2 992 MB/s raid6: int32x4 726 MB/s raid6: int32x8 609 MB/s raid6: mmxx1 1964 MB/s raid6: mmxx2 2269 MB/s raid6: sse1x1 1164 MB/s raid6: sse1x2 1250 MB/s raid6: sse2x1 2226 MB/s raid6: sse2x2 2402 MB/s raid6: using algorithm sse2x2 (2402 MB/s) md: raid6 personality registered as nr 8 md: multipath personality registered as nr 7 md: md driver 0.90.3 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 md: bitmap version 4.39 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com device-mapper: dm-multipath version 1.0.4 loaded device-mapper: dm-round-robin version 1.0.0 loaded device-mapper: dm-emc version 0.0.3 loaded wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.5 wbsd: Copyright(c) Pierre Ossman padlock: VIA PadLock not detected. oprofile: using NMI interrupt. NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller CCID: Registered CCID 3 (ccid3) Using IPI Shortcut mode md: Autodetecting RAID arrays. spurious 8259A interrupt: IRQ7. md: autorun ... md: considering sdd3 ... md: adding sdd3 ... md: sdd1 has different UUID to sdd3 md: adding sdc3 ... md: sdc1 has different UUID to sdd3 md: adding sdb3 ... md: sdb1 has different UUID to sdd3 md: adding sda3 ... md: sda1 has different UUID to sdd3 md: created md1 md: bind md: bind md: bind md: bind md: running: raid10: raid set md1 active with 4 out of 4 devices md: considering sdd1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: bind md: bind md: running: raid1: raid set md0 active with 4 out of 4 mirrors md: ... autorun DONE. ReiserFS: md1: found reiserfs format "3.6" with standard journal ReiserFS: md1: using ordered data mode ReiserFS: md1: journal params: device md1, size 8192, journal first block 1= 8, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md1: checking transaction log (md1) ReiserFS: md1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. =46reeing unused kernel memory: 256k freed Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k Adding 1004052k swap on /dev/sdb2. Priority:-2 extents:1 across:1004052k PCI: Found IRQ 5 for device 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:01:09.0 sk98lin: Network Device Driver v8.23.1.3 (C)Copyright 1999-2005 Marvell(R). PCI: Found IRQ 5 for device 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:01:09.0 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State PCI: Found IRQ 10 for device 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:00:1d.3 PCI: Sharing IRQ 10 with 0000:04:00.0 PCI: Setting latency timer of device 0000:00:1b.0 to 64 nvidia: no version for "struct_module" found: kernel tainted. nvidia: module license 'NVIDIA' taints kernel. PCI: Found IRQ 10 for device 0000:04:00.0 PCI: Sharing IRQ 10 with 0000:00:1b.0 PCI: Sharing IRQ 10 with 0000:00:1d.3 PCI: Setting latency timer of device 0000:04:00.0 to 64 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 1= 2:58:54 PDT 2005 ADDRCONF(NETDEV_UP): eth0: link is not ready eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: none irq moderation: disabled tcp offload: enabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready cdrom: open failed. eth0: no IPv6 routers present usb 1-2.4: link qh8-3008/efad5300 start 7 [1/2 us] usb 1-2.4: unlink qh8-3008/efad5300 start 7 [1/2 us] ehci_hcd 0000:00:1d.7: reused qh efad5300 schedule usb 1-2.4: link qh8-3008/efad5300 start 7 [1/2 us] --Boundary-00=_E5X0D+U2UprzUHi-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/