Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Marek Szyprowski <m.szyprowski@samsung.com>
To:     linux-usb@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
        linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Cc:     Marek Szyprowski <m.szyprowski@samsung.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        Maxime Ripard <mripard@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>, Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Stefan Agner <stefan@agner.ch>,
        Chunfeng Yun <chunfeng.yun@mediatek.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [PATCH v2 2/4] ARM: dts: qcom: Correct USB3503 GPIOs polarity
Date:   Wed, 11 Dec 2019 15:52:08 +0100
Message-Id: <20191211145208.24976-1-m.szyprowski@samsung.com>
In-Reply-To: <20191211145054.24835-1-m.szyprowski@samsung.com>
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20191211145054.24835-1-m.szyprowski@samsung.com>
        <CGME20191211145213eucas1p2c438f848ba705fa407331bb31b03b626@eucas1p2.samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 26160c324802..942e3a2cac35 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -143,7 +143,7 @@
 				compatible = "smsc,usb3503a";
 				reg = <0x8>;
 				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
-				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
 				initial-mode = <1>;
 			};
 		};
-- 
2.17.1