Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Thu, 12 Dec 2019 21:21:26 +0100
From:   Krzysztof Kozlowski <krzk@kernel.org>
To:     Marek Szyprowski <m.szyprowski@samsung.com>
Cc:     linux-usb@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
        linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        Maxime Ripard <mripard@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>, Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Stefan Agner <stefan@agner.ch>,
        Chunfeng Yun <chunfeng.yun@mediatek.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH v2 1/4] ARM: dts: exynos: Correct USB3503 GPIOs polarity
Message-ID: <20191212202126.GA3534@kozik-lap>
References: <20191211144638.24676-1-m.szyprowski@samsung.com>
 <CGME20191211144648eucas1p2065aac523ce190a5c0e6e2b5b11bd5ce@eucas1p2.samsung.com>
 <20191211144638.24676-2-m.szyprowski@samsung.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20191211144638.24676-2-m.szyprowski@samsung.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, Dec 11, 2019 at 03:46:35PM +0100, Marek Szyprowski wrote:
> Current USB3503 driver ignores GPIO polarity and always operates as if the
> GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
> USB3503 chip applications to match the chip specification and common
> convention for naming the pins. The only pin, which has to be ACTIVE_LOW
> is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
> to fix the USB3503 driver to properly use generic GPIO bindings and read
> polarity from DT.
> 

Thanks, applied (for v5.6).

Best regards,
Krzysztof