Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932471AbWAWU0z (ORCPT ); Mon, 23 Jan 2006 15:26:55 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932476AbWAWU0z (ORCPT ); Mon, 23 Jan 2006 15:26:55 -0500 Received: from pentafluge.infradead.org ([213.146.154.40]:17093 "EHLO pentafluge.infradead.org") by vger.kernel.org with ESMTP id S932471AbWAWU0u (ORCPT ); Mon, 23 Jan 2006 15:26:50 -0500 From: mchehab@infradead.org To: linux-kernel@vger.kernel.org Cc: linux-dvb-maintainer@linuxtv.org, video4linux-list@redhat.com, akpm@osdl.org, Michael Krufky , Mauro Carvalho Chehab Subject: [PATCH 07/16] Kill nxt2002 in favor of the nxt200x module Date: Mon, 23 Jan 2006 18:24:44 -0200 Message-id: <20060123202444.PS33043900007@infradead.org> In-Reply-To: <20060123202404.PS66974000000@infradead.org> References: <20060123202404.PS66974000000@infradead.org> Mime-Version: 1.0 X-Mailer: Evolution 2.4.2.1-1mdk Content-Transfer-Encoding: 7bit X-Bad-Reply: References and In-Reply-To but no 'Re:' in Subject. X-SRS-Rewrite: SMTP reverse-path rewritten from by pentafluge.infradead.org See http://www.infradead.org/rpr.html Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 26032 Lines: 970 From: Michael Krufky - Kill nxt2002 module in favor of nxt200x. - Repair broken nxt2002 support in the nxt200x module. - Make the flexcop driver use nxt200x instead of the nxt2002 module for the Air2PC 2nd generation PCI card. - Remove the nxt2002 module from cvs and kernel build. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/Kconfig | 2 drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 9 drivers/media/dvb/frontends/Kconfig | 12 drivers/media/dvb/frontends/Makefile | 1 drivers/media/dvb/frontends/dvb-pll.c | 2 drivers/media/dvb/frontends/nxt2002.c | 706 ----------------------------- drivers/media/dvb/frontends/nxt2002.h | 23 - drivers/media/dvb/frontends/nxt200x.c | 58 ++ 8 files changed, 57 insertions(+), 756 deletions(-) diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 2583a86..2963605 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -4,7 +4,7 @@ config DVB_B2C2_FLEXCOP select DVB_STV0299 select DVB_MT352 select DVB_MT312 - select DVB_NXT2002 + select DVB_NXT200X select DVB_STV0297 select DVB_BCM3510 select DVB_LGDT330X diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 0b940e1..dbe6f6b 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -9,7 +9,7 @@ #include "stv0299.h" #include "mt352.h" -#include "nxt2002.h" +#include "nxt200x.h" #include "bcm3510.h" #include "stv0297.h" #include "mt312.h" @@ -343,9 +343,10 @@ static struct lgdt330x_config air2pc_ats .clock_polarity_flip = 1, }; -static struct nxt2002_config samsung_tbmv_config = { +static struct nxt200x_config samsung_tbmv_config = { .demod_address = 0x0a, - .request_firmware = flexcop_fe_request_firmware, + .pll_address = 0xc2, + .pll_desc = &dvb_pll_tbmv30111in, }; static struct bcm3510_config air2pc_atsc_first_gen_config = { @@ -505,7 +506,7 @@ int flexcop_frontend_init(struct flexcop info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); } else /* try the air atsc 2nd generation (nxt2002) */ - if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { + if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { fc->dev_type = FC_AIR_ATSC2; info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); } else diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index db3a8b4..f09e3da 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -166,18 +166,6 @@ config DVB_STV0297 comment "ATSC (North American/Korean Terresterial DTV) frontends" depends on DVB_CORE -config DVB_NXT2002 - tristate "Nxt2002 based" - depends on DVB_CORE - select FW_LOADER - help - An ATSC 8VSB tuner module. Say Y when you want to support this frontend. - - This driver needs external firmware. Please use the command - "/Documentation/dvb/get_dvb_firmware nxt2002" to - download/extract it, and then copy it to /usr/lib/hotplug/firmware - or /lib/firmware (depending on configuration of firmware hotplug). - config DVB_NXT200X tristate "Nextwave NXT2002/NXT2004 based" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 615ec83..8f30146 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_DVB_CX22702) += cx22702.o obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o obj-$(CONFIG_DVB_TDA10021) += tda10021.o obj-$(CONFIG_DVB_STV0297) += stv0297.o -obj-$(CONFIG_DVB_NXT2002) += nxt2002.o obj-$(CONFIG_DVB_NXT200X) += nxt200x.o obj-$(CONFIG_DVB_OR51211) += or51211.o obj-$(CONFIG_DVB_OR51132) += or51132.o diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 1b9934e..9c9c12a 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -326,7 +326,7 @@ struct dvb_pll_desc dvb_pll_tuv1236d = { }; EXPORT_SYMBOL(dvb_pll_tuv1236d); -/* Samsung TBMV30111IN +/* Samsung TBMV30111IN / TBMV30712IN1 * used in Air2PC ATSC - 2nd generation (nxt2002) */ struct dvb_pll_desc dvb_pll_tbmv30111in = { diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c deleted file mode 100644 index 4f263e6..0000000 --- a/drivers/media/dvb/frontends/nxt2002.c +++ /dev/null @@ -1,706 +0,0 @@ -/* - Support for B2C2/BBTI Technisat Air2PC - ATSC - - Copyright (C) 2004 Taylor Jacob - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -/* - * This driver needs external firmware. Please use the command - * "/Documentation/dvb/get_dvb_firmware nxt2002" to - * download/extract it, and then copy it to /usr/lib/hotplug/firmware - * or /lib/firmware (depending on configuration of firmware hotplug). - */ -#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw" -#define CRC_CCIT_MASK 0x1021 - -#include -#include -#include -#include -#include -#include -#include - -#include "dvb_frontend.h" -#include "nxt2002.h" - -struct nxt2002_state { - - struct i2c_adapter* i2c; - struct dvb_frontend_ops ops; - const struct nxt2002_config* config; - struct dvb_frontend frontend; - - /* demodulator private data */ - u8 initialised:1; -}; - -static int debug; -#define dprintk(args...) \ - do { \ - if (debug) printk(KERN_DEBUG "nxt2002: " args); \ - } while (0) - -static int i2c_writebytes (struct nxt2002_state* state, u8 reg, u8 *buf, u8 len) -{ - /* probbably a much better way or doing this */ - u8 buf2 [256],x; - int err; - struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 }; - - buf2[0] = reg; - for (x = 0 ; x < len ; x++) - buf2[x+1] = buf[x]; - - if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { - printk ("%s: i2c write error (addr %02x, err == %i)\n", - __FUNCTION__, state->config->demod_address, err); - return -EREMOTEIO; - } - - return 0; -} - -static u8 i2c_readbytes (struct nxt2002_state* state, u8 reg, u8* buf, u8 len) -{ - u8 reg2 [] = { reg }; - - struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } }; - - int err; - - if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { - printk ("%s: i2c read error (addr %02x, err == %i)\n", - __FUNCTION__, state->config->demod_address, err); - return -EREMOTEIO; - } - - return 0; -} - -static u16 nxt2002_crc(u16 crc, u8 c) -{ - - u8 i; - u16 input = (u16) c & 0xFF; - - input<<=8; - for(i=0 ;i<8 ;i++) { - if((crc ^ input) & 0x8000) - crc=(crc<<1)^CRC_CCIT_MASK; - else - crc<<=1; - input<<=1; - } - return crc; -} - -static int nxt2002_writereg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len) -{ - u8 buf; - dprintk("%s\n", __FUNCTION__); - - /* set multi register length */ - i2c_writebytes(state,0x34,&len,1); - - /* set mutli register register */ - i2c_writebytes(state,0x35,®,1); - - /* send the actual data */ - i2c_writebytes(state,0x36,data,len); - - /* toggle the multireg write bit*/ - buf = 0x02; - i2c_writebytes(state,0x21,&buf,1); - - i2c_readbytes(state,0x21,&buf,1); - - if ((buf & 0x02) == 0) - return 0; - - dprintk("Error writing multireg register %02X\n",reg); - - return 0; -} - -static int nxt2002_readreg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len) -{ - u8 len2; - dprintk("%s\n", __FUNCTION__); - - /* set multi register length */ - len2 = len & 0x80; - i2c_writebytes(state,0x34,&len2,1); - - /* set mutli register register */ - i2c_writebytes(state,0x35,®,1); - - /* send the actual data */ - i2c_readbytes(state,reg,data,len); - - return 0; -} - -static void nxt2002_microcontroller_stop (struct nxt2002_state* state) -{ - u8 buf[2],counter = 0; - dprintk("%s\n", __FUNCTION__); - - buf[0] = 0x80; - i2c_writebytes(state,0x22,buf,1); - - while (counter < 20) { - i2c_readbytes(state,0x31,buf,1); - if (buf[0] & 0x40) - return; - msleep(10); - counter++; - } - - dprintk("Timeout waiting for micro to stop.. This is ok after firmware upload\n"); - return; -} - -static void nxt2002_microcontroller_start (struct nxt2002_state* state) -{ - u8 buf; - dprintk("%s\n", __FUNCTION__); - - buf = 0x00; - i2c_writebytes(state,0x22,&buf,1); -} - -static int nxt2002_writetuner (struct nxt2002_state* state, u8* data) -{ - u8 buf,count = 0; - - dprintk("Tuner Bytes: %02X %02X %02X %02X\n",data[0],data[1],data[2],data[3]); - - dprintk("%s\n", __FUNCTION__); - /* stop the micro first */ - nxt2002_microcontroller_stop(state); - - /* set the i2c transfer speed to the tuner */ - buf = 0x03; - i2c_writebytes(state,0x20,&buf,1); - - /* setup to transfer 4 bytes via i2c */ - buf = 0x04; - i2c_writebytes(state,0x34,&buf,1); - - /* write actual tuner bytes */ - i2c_writebytes(state,0x36,data,4); - - /* set tuner i2c address */ - buf = 0xC2; - i2c_writebytes(state,0x35,&buf,1); - - /* write UC Opmode to begin transfer */ - buf = 0x80; - i2c_writebytes(state,0x21,&buf,1); - - while (count < 20) { - i2c_readbytes(state,0x21,&buf,1); - if ((buf & 0x80)== 0x00) - return 0; - msleep(100); - count++; - } - - printk("nxt2002: timeout error writing tuner\n"); - return 0; -} - -static void nxt2002_agc_reset(struct nxt2002_state* state) -{ - u8 buf; - dprintk("%s\n", __FUNCTION__); - - buf = 0x08; - i2c_writebytes(state,0x08,&buf,1); - - buf = 0x00; - i2c_writebytes(state,0x08,&buf,1); - - return; -} - -static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) -{ - - struct nxt2002_state* state = fe->demodulator_priv; - u8 buf[256],written = 0,chunkpos = 0; - u16 rambase,position,crc = 0; - - dprintk("%s\n", __FUNCTION__); - dprintk("Firmware is %zu bytes\n",fw->size); - - /* Get the RAM base for this nxt2002 */ - i2c_readbytes(state,0x10,buf,1); - - if (buf[0] & 0x10) - rambase = 0x1000; - else - rambase = 0x0000; - - dprintk("rambase on this nxt2002 is %04X\n",rambase); - - /* Hold the micro in reset while loading firmware */ - buf[0] = 0x80; - i2c_writebytes(state,0x2B,buf,1); - - for (position = 0; position < fw->size ; position++) { - if (written == 0) { - crc = 0; - chunkpos = 0x28; - buf[0] = ((rambase + position) >> 8); - buf[1] = (rambase + position) & 0xFF; - buf[2] = 0x81; - /* write starting address */ - i2c_writebytes(state,0x29,buf,3); - } - written++; - chunkpos++; - - if ((written % 4) == 0) - i2c_writebytes(state,chunkpos,&fw->data[position-3],4); - - crc = nxt2002_crc(crc,fw->data[position]); - - if ((written == 255) || (position+1 == fw->size)) { - /* write remaining bytes of firmware */ - i2c_writebytes(state, chunkpos+4-(written %4), - &fw->data[position-(written %4) + 1], - written %4); - buf[0] = crc << 8; - buf[1] = crc & 0xFF; - - /* write crc */ - i2c_writebytes(state,0x2C,buf,2); - - /* do a read to stop things */ - i2c_readbytes(state,0x2A,buf,1); - - /* set transfer mode to complete */ - buf[0] = 0x80; - i2c_writebytes(state,0x2B,buf,1); - - written = 0; - } - } - - printk ("done.\n"); - return 0; -}; - -static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe, - struct dvb_frontend_parameters *p) -{ - struct nxt2002_state* state = fe->demodulator_priv; - u32 freq = 0; - u16 tunerfreq = 0; - u8 buf[4]; - - freq = 44000 + ( p->frequency / 1000 ); - - dprintk("freq = %d p->frequency = %d\n",freq,p->frequency); - - tunerfreq = freq * 24/4000; - - buf[0] = (tunerfreq >> 8) & 0x7F; - buf[1] = (tunerfreq & 0xFF); - - if (p->frequency <= 214000000) { - buf[2] = 0x84 + (0x06 << 3); - buf[3] = (p->frequency <= 172000000) ? 0x01 : 0x02; - } else if (p->frequency <= 721000000) { - buf[2] = 0x84 + (0x07 << 3); - buf[3] = (p->frequency <= 467000000) ? 0x02 : 0x08; - } else if (p->frequency <= 841000000) { - buf[2] = 0x84 + (0x0E << 3); - buf[3] = 0x08; - } else { - buf[2] = 0x84 + (0x0F << 3); - buf[3] = 0x02; - } - - /* write frequency information */ - nxt2002_writetuner(state,buf); - - /* reset the agc now that tuning has been completed */ - nxt2002_agc_reset(state); - - /* set target power level */ - switch (p->u.vsb.modulation) { - case QAM_64: - case QAM_256: - buf[0] = 0x74; - break; - case VSB_8: - buf[0] = 0x70; - break; - default: - return -EINVAL; - break; - } - i2c_writebytes(state,0x42,buf,1); - - /* configure sdm */ - buf[0] = 0x87; - i2c_writebytes(state,0x57,buf,1); - - /* write sdm1 input */ - buf[0] = 0x10; - buf[1] = 0x00; - nxt2002_writereg_multibyte(state,0x58,buf,2); - - /* write sdmx input */ - switch (p->u.vsb.modulation) { - case QAM_64: - buf[0] = 0x68; - break; - case QAM_256: - buf[0] = 0x64; - break; - case VSB_8: - buf[0] = 0x60; - break; - default: - return -EINVAL; - break; - } - buf[1] = 0x00; - nxt2002_writereg_multibyte(state,0x5C,buf,2); - - /* write adc power lpf fc */ - buf[0] = 0x05; - i2c_writebytes(state,0x43,buf,1); - - /* write adc power lpf fc */ - buf[0] = 0x05; - i2c_writebytes(state,0x43,buf,1); - - /* write accumulator2 input */ - buf[0] = 0x80; - buf[1] = 0x00; - nxt2002_writereg_multibyte(state,0x4B,buf,2); - - /* write kg1 */ - buf[0] = 0x00; - i2c_writebytes(state,0x4D,buf,1); - - /* write sdm12 lpf fc */ - buf[0] = 0x44; - i2c_writebytes(state,0x55,buf,1); - - /* write agc control reg */ - buf[0] = 0x04; - i2c_writebytes(state,0x41,buf,1); - - /* write agc ucgp0 */ - switch (p->u.vsb.modulation) { - case QAM_64: - buf[0] = 0x02; - break; - case QAM_256: - buf[0] = 0x03; - break; - case VSB_8: - buf[0] = 0x00; - break; - default: - return -EINVAL; - break; - } - i2c_writebytes(state,0x30,buf,1); - - /* write agc control reg */ - buf[0] = 0x00; - i2c_writebytes(state,0x41,buf,1); - - /* write accumulator2 input */ - buf[0] = 0x80; - buf[1] = 0x00; - nxt2002_writereg_multibyte(state,0x49,buf,2); - nxt2002_writereg_multibyte(state,0x4B,buf,2); - - /* write agc control reg */ - buf[0] = 0x04; - i2c_writebytes(state,0x41,buf,1); - - nxt2002_microcontroller_start(state); - - /* adjacent channel detection should be done here, but I don't - have any stations with this need so I cannot test it */ - - return 0; -} - -static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status) -{ - struct nxt2002_state* state = fe->demodulator_priv; - u8 lock; - i2c_readbytes(state,0x31,&lock,1); - - *status = 0; - if (lock & 0x20) { - *status |= FE_HAS_SIGNAL; - *status |= FE_HAS_CARRIER; - *status |= FE_HAS_VITERBI; - *status |= FE_HAS_SYNC; - *status |= FE_HAS_LOCK; - } - return 0; -} - -static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber) -{ - struct nxt2002_state* state = fe->demodulator_priv; - u8 b[3]; - - nxt2002_readreg_multibyte(state,0xE6,b,3); - - *ber = ((b[0] << 8) + b[1]) * 8; - - return 0; -} - -static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength) -{ - struct nxt2002_state* state = fe->demodulator_priv; - u8 b[2]; - u16 temp = 0; - - /* setup to read cluster variance */ - b[0] = 0x00; - i2c_writebytes(state,0xA1,b,1); - - /* get multreg val */ - nxt2002_readreg_multibyte(state,0xA6,b,2); - - temp = (b[0] << 8) | b[1]; - *strength = ((0x7FFF - temp) & 0x0FFF) * 16; - - return 0; -} - -static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr) -{ - - struct nxt2002_state* state = fe->demodulator_priv; - u8 b[2]; - u16 temp = 0, temp2; - u32 snrdb = 0; - - /* setup to read cluster variance */ - b[0] = 0x00; - i2c_writebytes(state,0xA1,b,1); - - /* get multreg val from 0xA6 */ - nxt2002_readreg_multibyte(state,0xA6,b,2); - - temp = (b[0] << 8) | b[1]; - temp2 = 0x7FFF - temp; - - /* snr will be in db */ - if (temp2 > 0x7F00) - snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) ); - else if (temp2 > 0x7EC0) - snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) ); - else if (temp2 > 0x7C00) - snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) ); - else - snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) ); - - /* the value reported back from the frontend will be FFFF=32db 0000=0db */ - - *snr = snrdb * (0xFFFF/32000); - - return 0; -} - -static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) -{ - struct nxt2002_state* state = fe->demodulator_priv; - u8 b[3]; - - nxt2002_readreg_multibyte(state,0xE6,b,3); - *ucblocks = b[2]; - - return 0; -} - -static int nxt2002_sleep(struct dvb_frontend* fe) -{ - return 0; -} - -static int nxt2002_init(struct dvb_frontend* fe) -{ - struct nxt2002_state* state = fe->demodulator_priv; - const struct firmware *fw; - int ret; - u8 buf[2]; - - if (!state->initialised) { - /* request the firmware, this will block until someone uploads it */ - printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE); - ret = state->config->request_firmware(fe, &fw, NXT2002_DEFAULT_FIRMWARE); - printk("nxt2002: Waiting for firmware upload(2)...\n"); - if (ret) { - printk("nxt2002: no firmware upload (timeout or file not found?)\n"); - return ret; - } - - ret = nxt2002_load_firmware(fe, fw); - if (ret) { - printk("nxt2002: writing firmware to device failed\n"); - release_firmware(fw); - return ret; - } - printk("nxt2002: firmware upload complete\n"); - - /* Put the micro into reset */ - nxt2002_microcontroller_stop(state); - - /* ensure transfer is complete */ - buf[0]=0; - i2c_writebytes(state,0x2B,buf,1); - - /* Put the micro into reset for real this time */ - nxt2002_microcontroller_stop(state); - - /* soft reset everything (agc,frontend,eq,fec)*/ - buf[0] = 0x0F; - i2c_writebytes(state,0x08,buf,1); - buf[0] = 0x00; - i2c_writebytes(state,0x08,buf,1); - - /* write agc sdm configure */ - buf[0] = 0xF1; - i2c_writebytes(state,0x57,buf,1); - - /* write mod output format */ - buf[0] = 0x20; - i2c_writebytes(state,0x09,buf,1); - - /* write fec mpeg mode */ - buf[0] = 0x7E; - buf[1] = 0x00; - i2c_writebytes(state,0xE9,buf,2); - - /* write mux selection */ - buf[0] = 0x00; - i2c_writebytes(state,0xCC,buf,1); - - state->initialised = 1; - } - - return 0; -} - -static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) -{ - fesettings->min_delay_ms = 500; - fesettings->step_size = 0; - fesettings->max_drift = 0; - return 0; -} - -static void nxt2002_release(struct dvb_frontend* fe) -{ - struct nxt2002_state* state = fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops nxt2002_ops; - -struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config, - struct i2c_adapter* i2c) -{ - struct nxt2002_state* state = NULL; - u8 buf [] = {0,0,0,0,0}; - - /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL); - if (state == NULL) goto error; - - /* setup the state */ - state->config = config; - state->i2c = i2c; - memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops)); - state->initialised = 0; - - /* Check the first 5 registers to ensure this a revision we can handle */ - - i2c_readbytes(state, 0x00, buf, 5); - if (buf[0] != 0x04) goto error; /* device id */ - if (buf[1] != 0x02) goto error; /* fab id */ - if (buf[2] != 0x11) goto error; /* month */ - if (buf[3] != 0x20) goto error; /* year msb */ - if (buf[4] != 0x00) goto error; /* year lsb */ - - /* create dvb_frontend */ - state->frontend.ops = &state->ops; - state->frontend.demodulator_priv = state; - return &state->frontend; - -error: - kfree(state); - return NULL; -} - -static struct dvb_frontend_ops nxt2002_ops = { - - .info = { - .name = "Nextwave nxt2002 VSB/QAM frontend", - .type = FE_ATSC, - .frequency_min = 54000000, - .frequency_max = 860000000, - /* stepsize is just a guess */ - .frequency_stepsize = 166666, - .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256 - }, - - .release = nxt2002_release, - - .init = nxt2002_init, - .sleep = nxt2002_sleep, - - .set_frontend = nxt2002_setup_frontend_parameters, - .get_tune_settings = nxt2002_get_tune_settings, - - .read_status = nxt2002_read_status, - .read_ber = nxt2002_read_ber, - .read_signal_strength = nxt2002_read_signal_strength, - .read_snr = nxt2002_read_snr, - .read_ucblocks = nxt2002_read_ucblocks, - -}; - -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); - -MODULE_DESCRIPTION("NXT2002 ATSC (8VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver"); -MODULE_AUTHOR("Taylor Jacob"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(nxt2002_attach); diff --git a/drivers/media/dvb/frontends/nxt2002.h b/drivers/media/dvb/frontends/nxt2002.h deleted file mode 100644 index 462301f..0000000 --- a/drivers/media/dvb/frontends/nxt2002.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - Driver for the Nxt2002 demodulator -*/ - -#ifndef NXT2002_H -#define NXT2002_H - -#include -#include - -struct nxt2002_config -{ - /* the demodulator's i2c address */ - u8 demod_address; - - /* request firmware for device */ - int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); -}; - -extern struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config, - struct i2c_adapter* i2c); - -#endif // NXT2002_H diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c index 78d2b93..9e35353 100644 --- a/drivers/media/dvb/frontends/nxt200x.c +++ b/drivers/media/dvb/frontends/nxt200x.c @@ -1,9 +1,10 @@ /* * Support for NXT2002 and NXT2004 - VSB/QAM * - * Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com) + * Copyright (C) 2005 Kirk Lapray + * Copyright (C) 2006 Michael Krufky * based on nxt2002 by Taylor Jacob - * and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com) + * and nxt2004 by Jean-Francois Thibert * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -614,7 +615,17 @@ static int nxt200x_setup_frontend_parame /* write sdm1 input */ buf[0] = 0x10; buf[1] = 0x00; - nxt200x_writebytes(state, 0x58, buf, 2); + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x58, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x58, buf, 2); + break; + default: + return -EINVAL; + break; + } /* write sdmx input */ switch (p->u.vsb.modulation) { @@ -632,7 +643,17 @@ static int nxt200x_setup_frontend_parame break; } buf[1] = 0x00; - nxt200x_writebytes(state, 0x5C, buf, 2); + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x5C, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x5C, buf, 2); + break; + default: + return -EINVAL; + break; + } /* write adc power lpf fc */ buf[0] = 0x05; @@ -648,7 +669,17 @@ static int nxt200x_setup_frontend_parame /* write accumulator2 input */ buf[0] = 0x80; buf[1] = 0x00; - nxt200x_writebytes(state, 0x4B, buf, 2); + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x4B, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x4B, buf, 2); + break; + default: + return -EINVAL; + break; + } /* write kg1 */ buf[0] = 0x00; @@ -714,8 +745,19 @@ static int nxt200x_setup_frontend_parame /* write accumulator2 input */ buf[0] = 0x80; buf[1] = 0x00; - nxt200x_writebytes(state, 0x49, buf,2); - nxt200x_writebytes(state, 0x4B, buf,2); + switch (state->demod_chip) { + case NXT2002: + nxt200x_writereg_multibyte(state, 0x49, buf, 2); + nxt200x_writereg_multibyte(state, 0x4B, buf, 2); + break; + case NXT2004: + nxt200x_writebytes(state, 0x49, buf, 2); + nxt200x_writebytes(state, 0x4B, buf, 2); + break; + default: + return -EINVAL; + break; + } /* write agc control reg */ buf[0] = 0x04; @@ -1199,7 +1241,7 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); -MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob"); +MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(nxt200x_attach); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/