Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Jia-Ju Bai <baijiaju1990@gmail.com>
To:     fabien.dessenne@st.com, mchehab@kernel.org
Cc:     linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
        Jia-Ju Bai <baijiaju1990@gmail.com>
Subject: [PATCH v2] media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()
Date:   Thu, 19 Dec 2019 18:34:01 +0800
Message-Id: <20191219103401.13630-1-baijiaju1990@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/media/platform/sti/bdisp/bdisp-hw.c, 385:
    msleep in bdisp_hw_reset
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 341:
    bdisp_hw_reset in bdisp_device_run
drivers/media/platform/sti/bdisp/bdisp-v4l2.c, 317:
    _raw_spin_lock_irqsave in bdisp_device_run

To fix this bug, msleep() is replaced with udelay().

This bug is found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
---
v2:
* Use udelay() instead of mdelay().
  Thank Fabien for good advice.

---
 drivers/media/platform/sti/bdisp/bdisp-hw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-hw.c b/drivers/media/platform/sti/bdisp/bdisp-hw.c
index 4372abbb5950..a74e9fd65238 100644
--- a/drivers/media/platform/sti/bdisp/bdisp-hw.c
+++ b/drivers/media/platform/sti/bdisp/bdisp-hw.c
@@ -14,8 +14,8 @@
 #define MAX_SRC_WIDTH           2048
 
 /* Reset & boot poll config */
-#define POLL_RST_MAX            50
-#define POLL_RST_DELAY_MS       20
+#define POLL_RST_MAX            500
+#define POLL_RST_DELAY_MS       2
 
 enum bdisp_target_plan {
 	BDISP_RGB,
@@ -382,7 +382,7 @@ int bdisp_hw_reset(struct bdisp_dev *bdisp)
 	for (i = 0; i < POLL_RST_MAX; i++) {
 		if (readl(bdisp->regs + BLT_STA1) & BLT_STA1_IDLE)
 			break;
-		msleep(POLL_RST_DELAY_MS);
+		udelay(POLL_RST_DELAY_MS * 1000);
 	}
 	if (i == POLL_RST_MAX)
 		dev_err(bdisp->dev, "Reset timeout\n");
-- 
2.17.1