Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Received-SPF: Pass (protection.outlook.com: domain of analog.com designates
 137.71.25.57 as permitted sender) receiver=protection.outlook.com;
 client-ip=137.71.25.57; helo=nwd2mta2.analog.com;
From:   Beniamin Bia <beniamin.bia@analog.com>
To:     <linux-hwmon@vger.kernel.org>
CC:     <Michael.Hennerich@analog.com>, <linux-kernel@vger.kernel.org>,
        <jdelvare@suse.com>, <linux@roeck-us.net>, <mark.rutland@arm.com>,
        <lgirdwood@gmail.com>, <broonie@kernel.org>,
        <devicetree@vger.kernel.org>, <biabeniamin@outlook.com>,
        Beniamin Bia <beniamin.bia@analog.com>
Subject: [PATCH v2 2/3] dt-binding: hwmon: Add documentation for ADM1177
Date:   Thu, 19 Dec 2019 13:41:26 +0200
Message-ID: <20191219114127.21905-2-beniamin.bia@analog.com>
In-Reply-To: <20191219114127.21905-1-beniamin.bia@analog.com>
References: <20191219114127.21905-1-beniamin.bia@analog.com>
MIME-Version: 1.0
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 19 Dec 2019 11:40:27.0528
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 9410d7b5-7bbf-4227-772b-08d784783e42
X-MS-Exchange-CrossTenant-Id: eaa689b4-8f87-40e0-9c6f-7228de4d754a
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=eaa689b4-8f87-40e0-9c6f-7228de4d754a;Ip=[137.71.25.57];Helo=[nwd2mta2.analog.com]
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN8PR03MB4692
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.95,18.0.572
 definitions=2019-12-19_01:2019-12-17,2019-12-19 signatures=0
X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 adultscore=0 mlxlogscore=999
 clxscore=1015 impostorscore=0 phishscore=0 spamscore=0 mlxscore=0
 malwarescore=0 suspectscore=0 bulkscore=0 lowpriorityscore=0
 priorityscore=1501 classifier=spam adjust=0 reason=mlx scancount=1
 engine=8.12.0-1910280000 definitions=main-1912190101
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Documentation for ADM1177 was added.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
---
Changes in v2:
-adi,r-sense-micro-ohms: replaced by shunt-resistor-micro-ohms 
 .../bindings/hwmon/adi,adm1177.yaml           | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
new file mode 100644
index 000000000000..65ef95328bc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+  Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1177
+
+  reg:
+    maxItems: 1
+
+  avcc-supply:
+    description:
+      Phandle to the Avcc power supply
+
+  shunt-resistor-micro-ohms:
+    description:
+      The value of curent sense resistor in microohms. If not provided,
+      the current reading and overcurrent alert is disabled.
+
+  adi,shutdown-threshold-microamp:
+    description:
+      Specifies the current level at which an over current alert occurs.
+      If not provided, the overcurrent alert is configured to max ADC range
+      based on shunt-resistor-micro-ohms.
+
+  adi,vrange-high-enable:
+    description:
+      Specifies which internal voltage divider to be used. A 1 selects
+      a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pwmon@5a {
+                compatible = "adi,adm1177";
+                reg = <0x5a>;
+		shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
+                adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
+                adi,vrange-high-enable;
+        };
+    };
+...
-- 
2.17.1