Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20191218114625.28438-1-frank-w@public-files.de>
 <CAK7LNARWYE4-4Qp-YfTrrt1YCZ68b28FDoE45cDJkZTqUyXNUw@mail.gmail.com>
 <CAL_Jsq+we-0c25Hn+eGDTsyTDwKEvs9LWV9QtLX1+8V3DmtFtg@mail.gmail.com> <trinity-76f78a91-fc1f-479c-bd38-a7b989b28234-1576757117258@3c-app-gmx-bap68>
In-Reply-To: <trinity-76f78a91-fc1f-479c-bd38-a7b989b28234-1576757117258@3c-app-gmx-bap68>
From:   Rob Herring <robh+dt@kernel.org>
Date:   Thu, 19 Dec 2019 11:02:01 -0600
Message-ID: <CAL_JsqL9gZbVC5X3gwYWpYc9-Geb4FvUP0cED8NC_MCEGQCy3g@mail.gmail.com>
Subject: Re: Re: [PATCH] kbuild: Add DTC_CPP_FLAGS
To:     Frank Wunderlich <frank-w@public-files.de>
Cc:     Masahiro Yamada <masahiroy@kernel.org>,
        Linux Kbuild mailing list <linux-kbuild@vger.kernel.org>,
        Michal Marek <michal.lkml@markovi.net>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        Frank Rowand <frowand.list@gmail.com>,
        DTML <devicetree@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, Dec 19, 2019 at 6:05 AM Frank Wunderlich
<frank-w@public-files.de> wrote:
>
> Hi Rob,
>
> so the way you prefer is this one (use new file for additions and including the board dts):

Yes, or you could use an overlay, but that will raise other issues
(current lack of support building them in the kernel).

> arch/arm64/boot/dts/mediatek/mt7622-bpi-r64-mt7531.dts (example for mt7531-phy)
>
> /*
>  * Copyright (c) 2018 MediaTek Inc.
>  * Author:
>  *
>  * SPDX-License-Identifier: (GPL-2.0 OR MIT)
>  */
>
> /dts-v1/;
>
> #include "mt7622-bananapi-bpi-r64.dts"
>
> / {
>         gsw: gsw@0 {
>                 compatible = "mediatek,mt753x";
>                 mediatek,ethsys = <&ethsys>;
>                 #address-cells = <1>;
>                 #size-cells = <0>;
>         };
> };
>
> &gsw {
>         mediatek,mdio = <&mdio>;
>         mediatek,portmap = "wllll";
>         mediatek,mdio_master_pinmux = <0>;
>         reset-gpios = <&pio 54 0>;
>         interrupt-parent = <&pio>;
>         interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
>         status = "okay";
>
>         port5: port@5 {
>                 compatible = "mediatek,mt753x-port";
>                 reg = <5>;
>                 phy-mode = "rgmii";
>                 fixed-link {
>                         speed = <1000>;
>                         full-duplex;
>                 };
>         };
>
>         port6: port@6 {
>                 compatible = "mediatek,mt753x-port";
>                 reg = <6>;
>                 phy-mode = "2500base-x";
>                 fixed-link {
>                         speed = <2500>;
>                         full-duplex;
>                 };
>         };
> };
>
> at least it compiles and after decompile the new nodes are visible...
>
> is there any way to drop nodes (in case dsa-driver gets merged i don't need it in the other 2)? i can disable them, but they will be present.

Yes, use '/delete-node/'.

Rob