Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To:     linux-amlogic@lists.infradead.org, netdev@vger.kernel.org,
        davem@davemloft.net, khilman@baylibre.com
Cc:     linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        balbes-150@yandex.ru, ingrassia@epigenesys.com,
        jbrunet@baylibre.com, linus.luessing@c0d3.blue,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 3/3] ARM: dts: meson8m2: mxiii-plus: use the same RGMII TX delay as u-boot
Date:   Wed, 25 Dec 2019 01:56:55 +0100
Message-Id: <20191225005655.1502037-4-martin.blumenstingl@googlemail.com>
In-Reply-To: <20191225005655.1502037-1-martin.blumenstingl@googlemail.com>
References: <20191225005655.1502037-1-martin.blumenstingl@googlemail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Due to a bug in the MPLL2 clock setup (which is used as input for the
RGMII TX clock) a TX delay of 2ns did not work previously. With a TX
delay of 4ns Ethernet worked enough to get an IP via DHCP but there was
still high packet loss when transmitting data.

Update the TX delay to 2ns - which is the same value that u-boot and the
vendor kernel use - to fix the packet loss when transmitting data.

Fixes: 35ee52bea66c74 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index d54477b1001c..fd94b5cbd845 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -71,7 +71,7 @@ &ethmac {
 	phy-handle = <&eth_phy0>;
 	phy-mode = "rgmii";
 
-	amlogic,tx-delay-ns = <4>;
+	amlogic,tx-delay-ns = <2>;
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
-- 
2.24.1