Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Jernej =?utf-8?B?xaBrcmFiZWM=?= <jernej.skrabec@siol.net>
To:     Roman Stratiienko <roman.stratiienko@globallogic.com>
Cc:     Maxime Ripard <mripard@kernel.org>,
        dri-devel@lists.freedesktop.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC 3/4] drm/sun4i: Reimplement plane z position setting logic
Date:   Sun, 29 Dec 2019 14:02:33 +0100
Message-ID: <2015568.Icojqenx9y@jernej-laptop>
In-Reply-To: <CAODwZ7srrrbDk=kKjg2-amVtGzNsqqZ72JopHijtNPD=-EzjgA@mail.gmail.com>
References: <20191228202818.69908-1-roman.stratiienko@globallogic.com> <1775324.taCxCBeP46@jernej-laptop> <CAODwZ7srrrbDk=kKjg2-amVtGzNsqqZ72JopHijtNPD=-EzjgA@mail.gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8BIT
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Dne nedelja, 29. december 2019 ob 13:47:38 CET je Roman Stratiienko 
napisal(a):
> On Sun, Dec 29, 2019 at 2:18 PM Jernej Škrabec <jernej.skrabec@siol.net> 
wrote:
> > Dne nedelja, 29. december 2019 ob 13:08:19 CET je Roman Stratiienko
> > 
> > napisal(a):
> > > Hello Jernej,
> > > 
> > > Thank you for review.
> > > 
> > > On Sun, Dec 29, 2019 at 11:40 AM Jernej Škrabec
> > > <jernej.skrabec@siol.net>
> > 
> > wrote:
> > > > Hi!
> > > > 
> > > > Dne sobota, 28. december 2019 ob 21:28:17 CET je
> > > > 
> > > > roman.stratiienko@globallogic.com napisal(a):
> > > > > From: Roman Stratiienko <roman.stratiienko@globallogic.com>
> > > > > 
> > > > > To set blending channel order register software needs to know state
> > > > > and
> > > > > position of each channel, which impossible at plane commit stage.
> > > > > 
> > > > > Move this procedure to atomic_flush stage, where all necessary
> > > > > information
> > > > > is available.
> > > > > 
> > > > > Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
> > > > > ---
> > > > > 
> > > > >  drivers/gpu/drm/sun4i/sun8i_mixer.c    | 47
> > > > >  +++++++++++++++++++++++++-
> > > > >  drivers/gpu/drm/sun4i/sun8i_mixer.h    |  3 ++
> > > > >  drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 42 ++++-------------------
> > > > >  drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 39 +++------------------
> > > > >  4 files changed, 60 insertions(+), 71 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > > > > b/drivers/gpu/drm/sun4i/sun8i_mixer.c index
> > > > > bb9a665fd053..da84fccf7784
> > > > > 100644
> > > > > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > > > > @@ -307,8 +307,47 @@ static void sun8i_atomic_begin(struct
> > > > > sunxi_engine
> > > > > *engine,
> > > > > 
> > > > >  static void sun8i_mixer_commit(struct sunxi_engine *engine)
> > > > >  {
> > > > > 
> > > > > -     DRM_DEBUG_DRIVER("Committing changes\n");
> > > > > +     struct sun8i_mixer *mixer = engine_to_sun8i_mixer(engine);
> > > > > +     u32 base = sun8i_blender_base(mixer);
> > > > > +     int i, j;
> > > > > +     int channel_by_zpos[4] = {-1, -1, -1, -1};
> > > > > +     u32 route = 0, pipe_ctl = 0;
> > > > > +
> > > > > +     DRM_DEBUG_DRIVER("Update blender routing\n");
> > > > 
> > > > Use drm_dbg().
> > > > 
> > > > > +     for (i = 0; i < 4; i++) {
> > > > > +             int zpos = mixer->channel_zpos[i];
> > > > 
> > > > channel_zpos can hold 5 elements which is also theoretical maximum for
> > > > current HW design. Why do you check only 4 elements?
> > > 
> > > I'll use plane_cnt as it done in mixer_bind
> > > 
> > > > It would be great to introduce a macro like SUN8I_MIXER_MAX_LAYERS so
> > > > everyone would understand where this number comes from.
> > > 
> > > Will do.
> > > 
> > > > > +
> > > > > +             if (zpos >= 0 && zpos < 4)
> > > > > +                     channel_by_zpos[zpos] = i;
> > > > > +     }
> > > > > +
> > > > > +     j = 0;
> > > > > +     for (i = 0; i < 4; i++) {
> > > > > +             int ch = channel_by_zpos[i];
> > > > > +
> > > > > +             if (ch >= 0) {
> > > > > +                     pipe_ctl |= SUN8I_MIXER_BLEND_PIPE_CTL_EN(j);
> > > > > +                     route |= ch <<
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(j);
> > > > 
> > > > > +                     j++;
> > > > > +             }
> > > > > +     }
> > > > > +
> > > > > +     for (i = 0; i < 4 && j < 4; i++) {
> > > > > +             int zpos = mixer->channel_zpos[i];
> > > > > 
> > > > > +             if (zpos < 0) {
> > > > > +                     route |= i <<
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(j);
> > > > 
> > > > > +                     j++;
> > > > > +             }
> > > > > +     }
> > > > > +
> > > > > +     regmap_update_bits(mixer->engine.regs,
> > > > 
> > > > SUN8I_MIXER_BLEND_PIPE_CTL(base),
> > > > 
> > > > > +                        SUN8I_MIXER_BLEND_PIPE_CTL_EN_MSK,
> > > > 
> > > > pipe_ctl);
> > > > 
> > > > > +
> > > > > +     regmap_write(mixer->engine.regs,
> > > > > +                  SUN8I_MIXER_BLEND_ROUTE(base), route);
> > > > > +
> > > > > +     DRM_DEBUG_DRIVER("Committing changes\n");
> > > > 
> > > > Use drm_dbg().
> > > 
> > > According to
> > > https://github.com/torvalds/linux/commit/99a954874e7b9f0c8058476575593b3
> > > beb
> > > 5731a5#diff-b0cd2d683c6afbab7bd54173cfd3d3ecR289 ,
> > > DRM_DEBUG_DRIVER uses drm_dbg.
> > > Also, using drm_dbg with category macro would require larger indent,
> > > making harder to fit in 80 chars limit.
> > 
> > From what I can see, category is already defined by macro name. Check
> > here:
> > https://cgit.freedesktop.org/drm/drm-misc/tree/include/drm/drm_print.h#n46
> > 5
> > 
> > So it should be actually shorter.
> 
> Ah, it something very recent.
> drm_dbg also require drm_device struct
> Do you know the best way to extract it from `struct engine`?

I don't think there is a way. I guess we can solve this later. Maxime, any 
thoughts?

Best regards,
Jernej

> 
> > > Are there any plans to deprecate DRM_DEBUG_DRIVER macro?
> > 
> > Yes, at least I understand following commit message in such manner:
> > https://cgit.freedesktop.org/drm/drm-misc/commit/?
> > id=93ccfa9a4eca482216c5caf88be77e5ffa0d744a
> > 
> > Best regards,
> > Jernej
> > 
> > > > >       regmap_write(engine->regs, SUN8I_MIXER_GLOBAL_DBUFF,
> > > > >       
> > > > >                    SUN8I_MIXER_GLOBAL_DBUFF_ENABLE);
> > > > >  
> > > > >  }
> > > > > 
> > > > > @@ -422,6 +461,12 @@ static int sun8i_mixer_bind(struct device *dev,
> > > > > struct
> > > > > device *master, mixer->engine.ops = &sun8i_engine_ops;
> > > > > 
> > > > >       mixer->engine.node = dev->of_node;
> > > > > 
> > > > > +     mixer->channel_zpos[0] = -1;
> > > > > +     mixer->channel_zpos[1] = -1;
> > > > > +     mixer->channel_zpos[2] = -1;
> > > > > +     mixer->channel_zpos[3] = -1;
> > > > > +     mixer->channel_zpos[4] = -1;
> > > > > +
> > > > 
> > > > for loop would be better, especially using proposed macro.
> > > 
> > > I'll put it into already existent for-loop below.
> > > 
> > > > Best regards,
> > > > Jernej
> > > > 
> > > > >       /*
> > > > >       
> > > > >        * While this function can fail, we shouldn't do anything
> > > > >        * if this happens. Some early DE2 DT entries don't provide
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.h
> > > > > b/drivers/gpu/drm/sun4i/sun8i_mixer.h index
> > > > > 915479cc3077..9c2ff87923d8
> > > > > 100644
> > > > > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.h
> > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.h
> > > > > @@ -178,6 +178,9 @@ struct sun8i_mixer {
> > > > > 
> > > > >       struct clk                      *bus_clk;
> > > > >       struct clk                      *mod_clk;
> > > > > 
> > > > > +
> > > > > +     /* -1 means that layer is disabled */
> > > > > +     int channel_zpos[5];
> > > > > 
> > > > >  };
> > > > >  
> > > > >  static inline struct sun8i_mixer *
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> > > > > b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c index
> > > > > 893076716070..23c2f4b68c89
> > > > > 100644
> > > > > --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> > > > > @@ -24,12 +24,10 @@
> > > > > 
> > > > >  #include "sun8i_ui_scaler.h"
> > > > >  
> > > > >  static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int
> > > > >  channel,
> > > > > 
> > > > > -                               int overlay, bool enable,
> > > > 
> > > > unsigned int zpos,
> > > > 
> > > > > -                               unsigned int old_zpos)
> > > > > +                               int overlay, bool enable,
> > > > 
> > > > unsigned int zpos)
> > > > 
> > > > >  {
> > > > > 
> > > > > -     u32 val, bld_base, ch_base;
> > > > > +     u32 val, ch_base;
> > > > > 
> > > > > -     bld_base = sun8i_blender_base(mixer);
> > > > > 
> > > > >       ch_base = sun8i_channel_base(mixer, channel);
> > > > >       
> > > > >       DRM_DEBUG_DRIVER("%sabling channel %d overlay %d\n",
> > > > > 
> > > > > @@ -44,32 +42,7 @@ static void sun8i_ui_layer_enable(struct
> > > > > sun8i_mixer
> > > > > *mixer, int channel, SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base,
> > > > > overlay),
> > > > > 
> > > > >                          SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
> > > > > 
> > > > > -     if (!enable || zpos != old_zpos) {
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > > 
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> > > > 
> > > > > -                                0);
> > > > > -
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > > 
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> > > > 
> > > > > -                                0);
> > > > > -     }
> > > > > -
> > > > > -     if (enable) {
> > > > > -             val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> > > > > -
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > > 
> > > > > -                                val, val);
> > > > > -
> > > > > -             val = channel <<
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(zpos);
> > > > 
> > > > > -
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > > 
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(zpos),
> > > > 
> > > > > -                                val);
> > > > > -     }
> > > > > +     mixer->channel_zpos[channel] = enable ? zpos : -1;
> > > > > 
> > > > >  }
> > > > >  
> > > > >  static int sun8i_ui_layer_update_coord(struct sun8i_mixer *mixer,
> > > > >  int
> > > > > 
> > > > > channel, @@ -235,11 +208,9 @@ static void
> > > > > sun8i_ui_layer_atomic_disable(struct drm_plane *plane, struct
> > > > > drm_plane_state *old_state)
> > > > > 
> > > > >  {
> > > > >  
> > > > >       struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
> > > > > 
> > > > > -     unsigned int old_zpos = old_state->normalized_zpos;
> > > > > 
> > > > >       struct sun8i_mixer *mixer = layer->mixer;
> > > > > 
> > > > > -     sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> > > > 
> > > > false, 0,
> > > > 
> > > > > -                           old_zpos);
> > > > > +     sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> > > > > false,
> > > > 
> > > > 0);
> > > > 
> > > > >  }
> > > > >  
> > > > >  static void sun8i_ui_layer_atomic_update(struct drm_plane *plane,
> > > > > 
> > > > > @@ -247,12 +218,11 @@ static void
> > > > > sun8i_ui_layer_atomic_update(struct
> > > > > drm_plane *plane, {
> > > > > 
> > > > >       struct sun8i_ui_layer *layer = plane_to_sun8i_ui_layer(plane);
> > > > >       unsigned int zpos = plane->state->normalized_zpos;
> > > > > 
> > > > > -     unsigned int old_zpos = old_state->normalized_zpos;
> > > > > 
> > > > >       struct sun8i_mixer *mixer = layer->mixer;
> > > > >       
> > > > >       if (!plane->state->visible) {
> > > > >       
> > > > >               sun8i_ui_layer_enable(mixer, layer->channel,
> > > > > 
> > > > > -                                   layer->overlay, false, 0,
> > > > 
> > > > old_zpos);
> > > > 
> > > > > +                                   layer->overlay, false, 0);
> > > > > 
> > > > >               return;
> > > > >       
> > > > >       }
> > > > > 
> > > > > @@ -263,7 +233,7 @@ static void sun8i_ui_layer_atomic_update(struct
> > > > > drm_plane *plane, sun8i_ui_layer_update_buffer(mixer,
> > > > > layer->channel,
> > > > > 
> > > > >                                    layer->overlay, plane);
> > > > >       
> > > > >       sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> > > > > 
> > > > > -                           true, zpos, old_zpos);
> > > > > +                           true, zpos);
> > > > > 
> > > > >  }
> > > > >  
> > > > >  static struct drm_plane_helper_funcs sun8i_ui_layer_helper_funcs =
> > > > >  {
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > > > > b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c index
> > > > > 42d445d23773..97cbc98bf781
> > > > > 100644
> > > > > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > > > > @@ -17,8 +17,7 @@
> > > > > 
> > > > >  #include "sun8i_vi_scaler.h"
> > > > >  
> > > > >  static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int
> > > > >  channel,
> > > > > 
> > > > > -                               int overlay, bool enable,
> > > > 
> > > > unsigned int zpos,
> > > > 
> > > > > -                               unsigned int old_zpos)
> > > > > +                               int overlay, bool enable,
> > > > 
> > > > unsigned int zpos)
> > > > 
> > > > >  {
> > > > >  
> > > > >       u32 val, bld_base, ch_base;
> > > > > 
> > > > > @@ -37,32 +36,7 @@ static void sun8i_vi_layer_enable(struct
> > > > > sun8i_mixer
> > > > > *mixer, int channel, SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base,
> > > > > overlay),
> > > > > 
> > > > >                          SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN, val);
> > > > > 
> > > > > -     if (!enable || zpos != old_zpos) {
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > > 
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> > > > 
> > > > > -                                0);
> > > > > -
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > > 
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> > > > 
> > > > > -                                0);
> > > > > -     }
> > > > > -
> > > > > -     if (enable) {
> > > > > -             val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> > > > > -
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > > 
> > > > > -                                val, val);
> > > > > -
> > > > > -             val = channel <<
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(zpos);
> > > > 
> > > > > -
> > > > > -             regmap_update_bits(mixer->engine.regs,
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > > 
> > > > > -
> > > > 
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(zpos),
> > > > 
> > > > > -                                val);
> > > > > -     }
> > > > > +     mixer->channel_zpos[channel] = enable ? zpos : -1;
> > > > > 
> > > > >  }
> > > > >  
> > > > >  static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer,
> > > > >  int
> > > > > 
> > > > > channel, @@ -350,11 +324,9 @@ static void
> > > > > sun8i_vi_layer_atomic_disable(struct drm_plane *plane, struct
> > > > > drm_plane_state *old_state)
> > > > > 
> > > > >  {
> > > > >  
> > > > >       struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
> > > > > 
> > > > > -     unsigned int old_zpos = old_state->normalized_zpos;
> > > > > 
> > > > >       struct sun8i_mixer *mixer = layer->mixer;
> > > > > 
> > > > > -     sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> > > > 
> > > > false, 0,
> > > > 
> > > > > -                           old_zpos);
> > > > > +     sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> > > > > false,
> > > > 
> > > > 0);
> > > > 
> > > > >  }
> > > > >  
> > > > >  static void sun8i_vi_layer_atomic_update(struct drm_plane *plane,
> > > > > 
> > > > > @@ -362,12 +334,11 @@ static void
> > > > > sun8i_vi_layer_atomic_update(struct
> > > > > drm_plane *plane, {
> > > > > 
> > > > >       struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane);
> > > > >       unsigned int zpos = plane->state->normalized_zpos;
> > > > > 
> > > > > -     unsigned int old_zpos = old_state->normalized_zpos;
> > > > > 
> > > > >       struct sun8i_mixer *mixer = layer->mixer;
> > > > >       
> > > > >       if (!plane->state->visible) {
> > > > >       
> > > > >               sun8i_vi_layer_enable(mixer, layer->channel,
> > > > > 
> > > > > -                                   layer->overlay, false, 0,
> > > > 
> > > > old_zpos);
> > > > 
> > > > > +                                   layer->overlay, false, 0);
> > > > > 
> > > > >               return;
> > > > >       
> > > > >       }
> > > > > 
> > > > > @@ -378,7 +349,7 @@ static void sun8i_vi_layer_atomic_update(struct
> > > > > drm_plane *plane, sun8i_vi_layer_update_buffer(mixer,
> > > > > layer->channel,
> > > > > 
> > > > >                                    layer->overlay, plane);
> > > > >       
> > > > >       sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> > > > > 
> > > > > -                           true, zpos, old_zpos);
> > > > > +                           true, zpos);
> > > > > 
> > > > >  }
> > > > >  
> > > > >  static struct drm_plane_helper_funcs sun8i_vi_layer_helper_funcs =
> > > > >  {