Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932297AbWAZLOi (ORCPT ); Thu, 26 Jan 2006 06:14:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932298AbWAZLOi (ORCPT ); Thu, 26 Jan 2006 06:14:38 -0500 Received: from [202.53.187.9] ([202.53.187.9]:12936 "EHLO cust8446.nsw01.dataco.com.au") by vger.kernel.org with ESMTP id S932297AbWAZLOf (ORCPT ); Thu, 26 Jan 2006 06:14:35 -0500 From: Nigel Cunningham Organization: Cyclades Corporation To: Prakash Punnoor Subject: Re: Issues with uli526x networking module Date: Thu, 26 Jan 2006 21:10:46 +1000 User-Agent: KMail/1.9.1 Cc: linux-kernel , jgarzik@pobox.com References: <200601260900.57951.prakash@punnoor.de> In-Reply-To: <200601260900.57951.prakash@punnoor.de> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200601262110.48090.ncunningham@cyclades.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 87208 Lines: 2503 Hi. On Thursday 26 January 2006 18:00, Prakash Punnoor wrote: > Hi, > > I have some problems with the uli526x driver. (I cc'ed the tulip > maintainer, as the driver is found in this category.) > > - It doesn't detect link when cable is plugged in, if module/driver is > loaded with no cable attached. I have to rmmod the module, plug in cable, > insmod the module and then set up the interface to get it running. That's > the only reason I compiled this driver as a module...(BTW, it is not AMD64 > related, as I experienced this also in x86.) > > - dhcpcd doesn't work. dhclient does though (but it is slow, I can't find > the correct parameters to speed it up). The former gets no response from > the dhcp server. I don't think it is a problem with the dhcp server, as > dhcpcd works from a notebook with some dlink pcmcia 10mbit interface. > > > Beside above, it seems to work fine, though. I have one too, and have done some work toward implementing power management support (working, but needs further work). I've noticed the link issue and will see if I can address it too. Regarding dhcpcd, I haven't used it, but will see if I can test before sending the patches to Jeff and to Peer Chen. Regards, Nigel > > attached some infos which might be needed: > > Bootdata ok (command line is root=/dev/sda5 elevator=cfq quiet) > Linux version 2.6.15 (root@varma) (gcc-Version 3.4.5 (Gentoo 3.4.5)) #1 SMP > PREEMPT Thu Jan 12 14:50:12 CET 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) > BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) > BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) > BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000180000000 (usable) > ACPI: RSDP (v000 ACPIAM ) @ > 0x00000000000f9bb0 ACPI: RSDT (v001 A M I OEMRSDT 0x12000506 MSFT > 0x00000097) @ > 0x000000007ffb0000 > ACPI: FADT (v002 A M I OEMFACP 0x12000506 MSFT 0x00000097) @ > 0x000000007ffb0200 > ACPI: MADT (v001 A M I OEMAPIC 0x12000506 MSFT 0x00000097) @ > 0x000000007ffb0390 > ACPI: OEMB (v001 A M I AMI_OEM 0x12000506 MSFT 0x00000097) @ > 0x000000007ffc0040 > ACPI: DSDT (v001 939M2 939M2150 0x00000150 INTL 0x02002026) @ > 0x0000000000000000 > On node 0 totalpages: 1025626 > DMA zone: 2674 pages, LIFO batch:0 > DMA32 zone: 505832 pages, LIFO batch:31 > Normal zone: 517120 pages, LIFO batch:31 > HighMem zone: 0 pages, LIFO batch:0 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:3 APIC version 16 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 15:3 APIC version 16 > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) > IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-39 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 88000000 (gap: 80000000:7f7c0000) > Checking aperture... > CPU 0: aperture @ d0000000 size 256 MB > Built 1 zonelists > Kernel command line: root=/dev/sda5 elevator=cfq quiet > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 131072 bytes) > time.c: Using 3.579545 MHz PM timer. > time.c: Detected 2000.122 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > Memory: 4095664k/6291456k available (3159k kernel code, 97584k reserved, > 1267k data, 212k init) > Calibrating delay using timer specific routine.. 4003.11 BogoMIPS > (lpj=2001559) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > mtrr: v2.0 (20020519) > Using local APIC timer interrupts. > Detected 12.500 MHz APIC timer. > Booting processor 1/2 APIC 0x1 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 3999.60 BogoMIPS > (lpj=1999803) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 > CPU 1: Syncing TSC to CPU 0. > CPU 1: synchronized TSC with CPU 0 (last diff 3 cycles, maxerr 534 cycles) > Brought up 2 CPUs > Disabling vsyscall due to use of PM timer > time.c: Using PM based timekeeping. > testing NMI watchdog ... OK. > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using configuration type 1 > ACPI: Subsystem revision 20050902 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > PCI quirk: region 0800-083f claimed by ali7101 ACPI > Boot video device is 0000:03:00.0 > PCI: Transparent bridge - 0000:00:06.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 > ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 13 devices > SCSI subsystem initialized > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report agpgart: Detected AGP bridge 20 > Setting up ULi AGP. > agpgart: AGP aperture is 256M @ 0xd0000000 > PCI-DMA: Reserving 128MB of IOMMU area in the AGP aperture > pnp: 00:0b: ioport range 0x290-0x29f has been reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: fc700000-fc7fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:02.0 > IO window: disabled. > MEM window: fc800000-fc8fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:05.0 > IO window: disabled. > MEM window: fc900000-fe9fffff > PREFETCH window: aff00000-bfefffff > PCI: Bridge: 0000:00:06.0 > IO window: disabled. > MEM window: fea00000-feafffff > PREFETCH window: disabled. > GSI 16 sharing vector 0xA9 and IRQ 16 > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > GSI 17 sharing vector 0xB1 and IRQ 17 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > PCI: Setting latency timer of device 0000:00:05.0 to 64 > PCI: Setting latency timer of device 0000:00:06.0 to 64 > IA-32 Microcode Update Driver: v1.14 > IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > NTFS driver 2.1.25 [Flags: R/W]. > fuse init (API version 7.3) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [PWRB] > Using specific hotkey driver > lp: driver loaded but no devices found > Real Time Clock Driver v1.12 > Non-volatile memory driver v1.2 > Linux agpgart interface v0.101 (c) Dave Jones > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] > lp0: using parport0 (interrupt-driven). > lp0: console ready > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ALI15X3: IDE controller at PCI slot 0000:00:12.0 > GSI 18 sharing vector 0xD1 and IRQ 18 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) -> IRQ 209 > ALI15X3: chipset revision 199 > ALI15X3: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio > Probing IDE interface ide0... > hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > ide-floppy driver 0.99.newide > libata version 1.20 loaded. > sata_uli 0000:00:12.1: version 0.5 > ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 209 > ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE082 bmdma 0xD880 irq 209 > ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 209 > ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 > 88:007f > ata1: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48 > ata1: dev 0 configured for UDMA/133 > scsi0 : sata_uli > ata2: no device found (phy stat 00000000) > scsi1 : sata_uli > Vendor: ATA Model: Maxtor 7L250S0 Rev: BANC > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) > SCSI device sda: drive cache: write back > SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) > SCSI device sda: drive cache: write back > sda: sda1 sda2 < sda5 sda6 sda7 > > sd 0:0:0:0: Attached scsi disk sda > sd 0:0:0:0: Attached scsi generic sg0 type 0 > usbmon: debugfs is not available > GSI 19 sharing vector 0xD9 and IRQ 19 > ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 217 > ehci_hcd 0000:00:13.3: EHCI Host Controller > ehci_hcd 0000:00:13.3: debug port 1 > ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:13.3: irq 217, io mem 0xfebfe800 > ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > GSI 20 sharing vector 0xE1 and IRQ 20 > ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 225 > ohci_hcd 0000:00:13.0: OHCI Host Controller > ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:13.0: irq 225, io mem 0xfebfd000 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > GSI 21 sharing vector 0xE9 and IRQ 21 > ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) -> IRQ 233 > ohci_hcd 0000:00:13.1: OHCI Host Controller > ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 > ohci_hcd 0000:00:13.1: irq 233, io mem 0xfebfc000 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 3 ports detected > GSI 22 sharing vector 0x32 and IRQ 22 > ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 50 > ohci_hcd 0000:00:13.2: OHCI Host Controller > ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 > ohci_hcd 0000:00:13.2: irq 50, io mem 0xfebfb000 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 3 ports detected > Initializing USB Mass Storage driver... > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > mice: PS/2 mouse device common for all mice > I2O subsystem v1.288 > i2o: max drivers = 8 > I2O Configuration OSM v1.248 > I2O Bus Adapter OSM v$Rev$ > I2O Block Device OSM v1.287 > I2O SCSI Peripheral OSM v1.282 > I2O ProcFS OSM v1.145 > i2c /dev entries driver > ali1563: SMBus control = 0403 > ali1563_probe: Returning 0 > input: AT Translated Set 2 keyboard as /class/input/input0 > Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 > 13:30:21 2005 UTC). > GSI 23 sharing vector 0x3A and IRQ 23 > ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 58 > input: ImPS/2 Generic Wheel Mouse as /class/input/input1 > AC'97 1 does not respond - RESET > AC'97 1 access is not valid [0xffffffff], removing mixer. > Unable to initialize codec #1 > intel8x0_measure_ac97_clock: measured 50953 usecs > intel8x0: clocking to 48000 > ALSA device list: > #0: ALi M5455 with ALC850 at 0x0, irq 58 > NET: Registered protocol family 2 > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4) > powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 (1350 mV) > powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV) > powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0xa (1300 mV) > cpu_init done, current fid 0xc, vid 0x8 > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 212k freed > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda5, internal journal > uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) > GSI 24 sharing vector 0x42 and IRQ 24 > ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 66 > eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:5d:2e:ea, irq 66. > ReiserFS: sda6: found reiserfs format "3.6" with standard journal > ReiserFS: sda6: using ordered data mode > ReiserFS: sda6: journal params: device sda6, size 8192, journal first block > 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 > ReiserFS: sda6: checking transaction log (sda6) > ReiserFS: sda6: Using r5 hash to sort names > uli526x: eth0 NIC Link is Up 100 Mbps Full duplex > NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory > NFSD: starting 90-second grace period > mtrr: type mismatch for b0000000,2000000 old: write-back new: > write-combining > > > 00:00.0 Host bridge: ALi Corporation M1695 K8 Northbridge [PCI Express and > HyperTransport] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Capabilities: [40] HyperTransport: Slave or Primary Interface > Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- DUL- > Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- > LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- > Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- > LWI=8bit DwFcInEn- LWO=16bit DwFcOutEn- > Revision ID: 1.05 > Link Frequency 0: 800MHz > Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ > 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- > UIDRD- > Link Frequency 1: 200MHz > Link Error 1: Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+ > 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- > Error Handling: PFlE+ OFlE+ PFE+ OFE+ EOCFE+ RFE+ CRCFE+ > SERRFE- CF- RE- PNFE+ ONFE+ EOCNFE+ RNFE- CRCNFE+ SERRNFE- > Prefetchable memory behind bridge Upper: 00-00 > Bus Number: 00 > Capabilities: [5c] HyperTransport: MSI Mapping > Capabilities: [68] HyperTransport: UnitID Clumping > Capabilities: [74] HyperTransport: Interrupt Discovery and > Configuration > Capabilities: [7c] Message Signalled Interrupts: 64bit+ Queue=0/1 > Enable- > Address: 00000000fee00000 Data: 0000 > 00: b9 10 95 16 07 00 10 00 00 00 00 06 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 > 40: 08 5c 60 00 20 00 11 11 20 00 11 10 25 05 f5 00 > 50: 02 00 f5 00 ff ff 7f 5c 00 00 00 00 08 68 00 a8 > 60: 00 00 e0 fe 00 00 00 00 08 74 00 90 00 00 00 00 > 70: 00 00 00 00 08 7c 00 80 67 03 b1 f8 05 00 82 00 > 80: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:01.0 PCI bridge: ALi Corporation PCI Express Root Port (prog-if 00 > [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fc700000-fc7fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 > Enable+ > Address: 00000000fee00000 Data: 40c1 > Capabilities: [58] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag+ Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port > 0 Link: Latency L0s <2us, L1 <32us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x16 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- > Surpise- Slot: Number 0, PowerLimit 0.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd Off, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [7c] HyperTransport: MSI Mapping > Capabilities: [88] HyperTransport: Revision ID: 1.05 > 00: b9 10 4b 52 06 05 10 00 00 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00 > 20: 70 fc 70 fc f0 ff 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 03 00 > 40: 01 48 02 c8 00 00 00 00 05 58 83 00 00 00 e0 fe > 50: 00 00 00 00 c1 40 00 00 10 7c 41 01 20 00 00 00 > 60: 10 28 18 00 01 dd 02 00 00 00 10 10 00 00 00 00 > 70: c0 03 00 00 00 00 00 00 00 00 00 00 08 88 00 a8 > 80: 00 00 e0 fe 00 00 00 00 08 00 25 88 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 03 00 00 00 00 00 0c 02 08 3f 63 ed 70 2c > b0: 00 00 00 00 00 11 00 00 00 00 00 00 01 00 3f 1f > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 d0 0c 40 01 04 73 00 00 00 00 00 d1 00 77 30 > e0: 00 00 00 00 01 00 00 00 01 00 00 00 26 38 18 d0 > f0: 01 50 94 2d 59 41 50 86 06 38 ef 53 40 0e 66 c1 > > 00:02.0 PCI bridge: ALi Corporation PCI Express Root Port (prog-if 00 > [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fc800000-fc8fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 > Enable+ > Address: 00000000fee00000 Data: 40c9 > Capabilities: [58] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag+ Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x2, ASPM L0s L1, Port > 0 Link: Latency L0s <2us, L1 <32us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x2 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- > Surpise- Slot: Number 0, PowerLimit 0.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Off, PwrInd Off, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [7c] HyperTransport: MSI Mapping > Capabilities: [88] HyperTransport: Revision ID: 1.05 > 00: b9 10 4c 52 06 05 10 00 00 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 00 > 20: 80 fc 80 fc f0 ff 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 00 > 40: 01 48 02 c8 00 00 00 00 05 58 83 00 00 00 e0 fe > 50: 00 00 00 00 c9 40 00 00 10 7c 41 01 20 00 00 00 > 60: 10 28 18 00 21 dc 02 00 00 00 10 10 00 00 00 00 > 70: c0 03 00 00 00 00 00 00 00 00 00 00 08 88 00 a8 > 80: 00 00 e0 fe 00 00 00 00 08 00 25 88 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 03 00 00 00 00 00 0c 02 09 3f 63 ed 70 2c > b0: 00 00 00 00 00 11 00 00 04 00 00 00 01 00 3f 1f > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 01 d0 0c 40 01 04 73 00 00 00 00 00 d1 00 77 30 > e0: 00 00 00 00 01 00 00 00 01 00 00 00 64 b1 41 40 > f0: d7 2e 91 66 7e 1d fc 1a cc 24 dc 44 22 2d 40 a4 > > 00:04.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single > Chip] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Capabilities: [40] HyperTransport: Slave or Primary Interface > Command: BaseUnitID=4 UnitCnt=1 MastHost- DefDir- DUL- > Link Control 0: CFlE- CST- CFE- Link Config 0: MLWI=16bit DwFcIn- MLWO=8bit DwFcOut- > LWI=16bit DwFcInEn- LWO=8bit DwFcOutEn- > Link Control 1: CFlE- CST- CFE- Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- > LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- > Revision ID: 1.04 > Link Frequency 0: 800MHz > Link Error 0: Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ > 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- > UIDRD- > Link Frequency 1: 200MHz > Link Error 1: Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- > 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- > SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- > Prefetchable memory behind bridge Upper: 00-00 > Bus Number: 00 > Capabilities: [60] HyperTransport: Interrupt Discovery and > Configuration > Capabilities: [80] AGP version 3.0 > Status: RQ=28 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate= > 00: b9 10 89 16 06 01 10 00 00 00 00 06 00 00 00 00 > 10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 > 40: 08 60 24 00 20 00 01 01 d0 00 00 00 24 05 35 00 > 50: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 08 80 32 80 66 03 42 f8 00 00 00 00 00 05 17 50 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 02 00 30 00 07 02 00 1b 00 00 00 00 0a 00 20 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:05.0 PCI bridge: ALi Corporation AGP8X Controller (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fc900000-fe9fffff > Prefetchable memory behind bridge: aff00000-bfefffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > 00: b9 10 46 52 07 01 20 00 00 00 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 03 03 40 f0 00 20 22 > 20: 90 fc 90 fe f0 af e0 bf 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 20 78 00 c0 00 20 20 20 20 20 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 11 00 00 00 00 11 00 01 20 1a > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:06.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge (prog-if 01 > [Subtractive decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fea00000-feafffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > 00: b9 10 49 52 06 01 00 00 00 01 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 04 04 20 f0 00 00 22 > 20: a0 fe a0 fe f0 ff 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 > 40: 00 80 00 78 00 00 00 00 80 00 00 20 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:07.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev > 70) Subsystem: ASRock Incorporation Unknown device 1563 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 (250ns min, 6000ns max) > 00: b9 10 63 15 0f 00 00 02 70 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 15 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 18 > 40: f7 e4 00 09 3d fa 00 00 00 00 00 00 03 c0 00 10 > 50: 02 00 02 00 0d 09 01 80 ff 3c fb 67 a1 60 10 00 > 60: d8 f8 c0 f2 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 07 63 15 00 0f 00 00 00 00 00 20 00 00 00 00 > 80: 03 04 00 00 21 0f cc dd ee 99 aa 99 00 bb 00 5f > 90: 80 03 83 00 00 00 00 00 1e 00 00 00 00 00 e0 fe > a0: 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: df 80 01 00 c0 00 f0 08 5f 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:07.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU] > Subsystem: ASRock Incorporation Unknown device 7101 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- 00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 71 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 40 00 00 00 00 20 00 08 7a 00 00 00 00 00 00 > 50: 00 07 ff 58 00 00 00 00 00 df 0f 10 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 ff 3f 3f 3f > 70: ff 07 00 00 00 00 00 08 76 88 b0 08 3c fe ff 00 > 80: 32 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 a0 aa 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: ff 44 80 20 00 ff ff 07 00 00 28 70 40 9b 02 00 > c0: 12 00 10 10 00 00 00 00 00 00 ff 00 4b 00 00 00 > d0: 00 42 04 00 40 00 22 04 4c 2f 00 00 00 00 00 00 > e0: 00 08 00 00 0e 29 cb 55 b4 00 01 00 00 00 00 36 > f0: 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 > > 00:08.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link > Controller Audio Device (rev 20) > Subsystem: ASRock Incorporation Unknown device 0850 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (16000ns min), Cache Line Size 10 > Interrupt: pin A routed to IRQ 58 > Region 0: I/O ports at e800 [size=256] > Region 1: Memory at febff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: b9 10 55 54 17 00 10 02 20 00 01 04 10 20 00 00 > 10: 01 e8 00 00 00 f0 bf fe 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 50 08 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 40 00 > 40: 01 00 22 e6 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 49 18 50 08 10 00 c4 00 40 00 07 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 57 54 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:11.0 Ethernet controller: ALi Corporation M5263 Ethernet Controller (rev > 40) > Subsystem: ASRock Incorporation Unknown device 5263 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (5000ns min, 10000ns max), Cache Line Size 08 > Interrupt: pin A routed to IRQ 66 > Region 0: I/O ports at e400 [size=256] > Region 1: Memory at febfec00 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: b9 10 63 52 07 01 10 02 40 00 00 02 08 20 00 00 > 10: 01 e4 00 00 00 ec bf fe 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 52 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 14 28 > 40: 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 01 00 22 c0 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:12.0 IDE interface: ALi Corporation M5229 IDE (rev c7) (prog-if 8a > [Master SecP PriP]) > Subsystem: ASRock Incorporation Unknown device 5229 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 > Interrupt: pin A routed to IRQ 209 > Region 0: I/O ports at > Region 1: I/O ports at > Region 2: I/O ports at > Region 3: I/O ports at > Region 4: I/O ports at ff00 [size=16] > 00: b9 10 29 52 05 00 a0 02 c7 8a 01 01 00 20 80 00 > 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00 > 20: 01 ff 00 00 00 00 00 00 00 00 00 00 49 18 29 52 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 > 40: 00 00 00 7a 4d 10 00 c0 00 80 64 c9 00 00 ba 1a > 50: 00 00 00 01 50 55 4a 44 01 31 31 00 00 00 00 00 > 60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 01 00 01 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:12.1 IDE interface: ALi Corporation ULi 5289 SATA (rev 10) (prog-if 8f > [Master SecP SecO PriP PriO]) > Subsystem: ASRock Incorporation Unknown device 5289 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32, Cache Line Size 10 > Interrupt: pin A routed to IRQ 209 > Region 0: I/O ports at ec00 [size=8] > Region 1: I/O ports at e080 [size=4] > Region 2: I/O ports at e000 [size=8] > Region 3: I/O ports at dc00 [size=4] > Region 4: I/O ports at d880 [size=16] > 00: b9 10 89 52 05 01 a0 02 10 8f 01 01 10 20 80 00 > 10: 01 ec 00 00 81 e0 00 00 01 e0 00 00 01 dc 00 00 > 20: 81 d8 00 00 00 00 00 00 00 00 00 00 49 18 89 52 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 06 01 00 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 1f 00 00 03 10 01 00 00 00 68 00 68 00 > 90: 13 01 00 00 01 04 8d 04 00 03 00 00 00 00 00 00 > a0: 00 00 00 00 00 04 80 00 00 03 00 00 00 00 00 00 > b0: 00 00 00 00 88 b1 0e 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:13.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) > (prog-if 10 [OHCI]) > Subsystem: ASRock Incorporation Unknown device 5237 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (20000ns max), Cache Line Size 10 > Interrupt: pin A routed to IRQ 225 > Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K] > 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 > 10: 00 d0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 50 > 40: 00 00 1f 00 e0 40 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:13.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) > (prog-if 10 [OHCI]) > Subsystem: ASRock Incorporation Unknown device 5237 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (20000ns max), Cache Line Size 10 > Interrupt: pin B routed to IRQ 233 > Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K] > 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 > 10: 00 c0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 50 > 40: 00 00 1f 00 e0 48 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:13.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) > (prog-if 10 [OHCI]) > Subsystem: ASRock Incorporation Unknown device 5237 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (20000ns max), Cache Line Size 10 > Interrupt: pin C routed to IRQ 50 > Region 0: Memory at febfb000 (32-bit, non-prefetchable) [size=4K] > 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 > 10: 00 b0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 50 > 40: 00 00 1f 00 e0 48 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:13.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) > (prog-if 20 [EHCI]) > Subsystem: ASRock Incorporation Unknown device 5239 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (4000ns min, 8000ns max), Cache Line Size 10 > Interrupt: pin D routed to IRQ 217 > Region 0: Memory at febfe800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port > 00: b9 10 39 52 16 01 b0 02 01 20 03 0c 10 20 80 00 > 10: 00 e8 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 52 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 10 20 > 40: 20 03 00 c4 80 02 10 c4 00 00 00 00 00 00 00 00 > 50: 01 58 02 c8 00 00 00 00 0a 00 90 20 00 00 00 00 > 60: 20 20 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 01 00 00 01 00 00 08 c0 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- Capabilities: [80] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 > 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 > 60: 00 00 01 00 e4 00 00 00 20 c8 00 0f 1c 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00 > 90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 03 00 00 00 00 00 7f 01 00 00 00 00 01 00 00 00 > 50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00 > 60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 > 70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00 > 80: 03 00 e0 00 00 ff ef 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 03 0a 00 00 00 0b 00 00 03 00 80 00 00 ff ff 00 > c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 00 00 00 01 00 00 04 01 00 00 10 01 00 00 14 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 fe e0 03 00 fe e0 03 00 fe e0 03 00 fe e0 03 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 77 00 00 00 00 00 00 00 45 34 82 13 31 0b 00 00 > 90: 80 8e 05 38 07 07 7b 3e 00 00 00 00 0d 02 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 71 9f 5e 3b 71 00 00 00 ff 31 00 00 bd ae fb ff > c0: 00 80 03 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 15 4c f1 f0 24 80 c8 20 4d eb fe f4 10 90 00 1a > e0: 45 1c 34 00 11 18 40 40 d3 55 bf b7 1f 6d 3c fd > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > SERR- 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: ff 3b 00 00 40 00 00 08 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 80 90 45 01 > 60: 8c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 11 01 02 51 11 80 00 50 00 38 00 08 1a 22 00 00 > 80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00 > 90: 07 00 00 00 68 00 00 00 00 80 7f 01 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 37 00 00 00 00 80 4d 5c > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 01 a7 0d 00 10 27 60 20 00 00 00 00 > e0: 00 00 00 00 20 07 4e 0e 19 11 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 03:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 > GTS/Pro] (rev a3) (prog-if 00 [VGA]) > Subsystem: Elsa AG Gladiac > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at b0000000 (32-bit, prefetchable) [size=128M] > Expansion ROM at fe9f0000 [disabled] [size=64K] > Capabilities: [60] Power Management version 1 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- > Rate= > 00: de 10 50 01 07 00 b0 02 a3 00 00 03 00 20 00 00 > 10: 00 00 00 fd 08 00 00 b0 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 48 10 50 0c > 30: 00 00 9f fe 60 00 00 00 00 00 00 00 05 01 05 01 > 40: 48 10 50 0c 02 00 20 00 17 00 00 1f 00 00 00 00 > 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 > 60: 01 44 01 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > # > # Automatically generated make config: don't edit > # Linux kernel version: 2.6.15 > # Thu Jan 12 14:47:37 2006 > # > CONFIG_X86_64=y > CONFIG_64BIT=y > CONFIG_X86=y > CONFIG_SEMAPHORE_SLEEPERS=y > CONFIG_MMU=y > CONFIG_RWSEM_GENERIC_SPINLOCK=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_X86_CMPXCHG=y > CONFIG_EARLY_PRINTK=y > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_IOMAP=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > # CONFIG_CLEAN_COMPILE is not set > CONFIG_BROKEN=y > CONFIG_BROKEN_ON_SMP=y > CONFIG_LOCK_KERNEL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > > # > # General setup > # > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_POSIX_MQUEUE=y > # CONFIG_BSD_PROCESS_ACCT is not set > CONFIG_SYSCTL=y > # CONFIG_AUDIT is not set > CONFIG_HOTPLUG=y > CONFIG_KOBJECT_UEVENT=y > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > # CONFIG_CPUSETS is not set > CONFIG_INITRAMFS_SOURCE="" > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > # CONFIG_EMBEDDED is not set > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_ALL is not set > # CONFIG_KALLSYMS_EXTRA_PASS is not set > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SHMEM=y > CONFIG_CC_ALIGN_FUNCTIONS=0 > CONFIG_CC_ALIGN_LABELS=0 > CONFIG_CC_ALIGN_LOOPS=0 > CONFIG_CC_ALIGN_JUMPS=0 > # CONFIG_TINY_SHMEM is not set > CONFIG_BASE_SMALL=0 > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > CONFIG_OBSOLETE_MODPARM=y > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_KMOD=y > CONFIG_STOP_MACHINE=y > > # > # Block layer > # > CONFIG_LBD=y > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_AS=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_DEFAULT_AS is not set > # CONFIG_DEFAULT_DEADLINE is not set > CONFIG_DEFAULT_CFQ=y > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="cfq" > > # > # Processor type and features > # > CONFIG_MK8=y > # CONFIG_MPSC is not set > # CONFIG_GENERIC_CPU is not set > CONFIG_X86_L1_CACHE_BYTES=64 > CONFIG_X86_L1_CACHE_SHIFT=6 > CONFIG_X86_TSC=y > CONFIG_X86_GOOD_APIC=y > CONFIG_MICROCODE=y > CONFIG_X86_MSR=y > CONFIG_X86_CPUID=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_MTRR=y > CONFIG_SMP=y > # CONFIG_SCHED_SMT is not set > # CONFIG_PREEMPT_NONE is not set > # CONFIG_PREEMPT_VOLUNTARY is not set > CONFIG_PREEMPT=y > CONFIG_PREEMPT_BKL=y > # CONFIG_NUMA is not set > CONFIG_ARCH_FLATMEM_ENABLE=y > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > # CONFIG_DISCONTIGMEM_MANUAL is not set > # CONFIG_SPARSEMEM_MANUAL is not set > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > # CONFIG_SPARSEMEM_STATIC is not set > CONFIG_SPLIT_PTLOCK_CPUS=4 > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y > CONFIG_NR_CPUS=2 > # CONFIG_HOTPLUG_CPU is not set > CONFIG_HPET_TIMER=y > CONFIG_X86_PM_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > CONFIG_GART_IOMMU=y > CONFIG_SWIOTLB=y > CONFIG_X86_MCE=y > CONFIG_X86_MCE_INTEL=y > CONFIG_X86_MCE_AMD=y > CONFIG_PHYSICAL_START=0x100000 > CONFIG_KEXEC=y > CONFIG_SECCOMP=y > # CONFIG_HZ_100 is not set > # CONFIG_HZ_250 is not set > CONFIG_HZ_1000=y > CONFIG_HZ=1000 > CONFIG_GENERIC_HARDIRQS=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_ISA_DMA_API=y > CONFIG_GENERIC_PENDING_IRQ=y > > # > # Power management options > # > CONFIG_PM=y > CONFIG_PM_LEGACY=y > # CONFIG_PM_DEBUG is not set > > # > # ACPI (Advanced Configuration and Power Interface) Support > # > CONFIG_ACPI=y > CONFIG_ACPI_AC=y > CONFIG_ACPI_BATTERY=y > CONFIG_ACPI_BUTTON=y > CONFIG_ACPI_VIDEO=y > CONFIG_ACPI_HOTKEY=y > CONFIG_ACPI_FAN=y > CONFIG_ACPI_PROCESSOR=y > CONFIG_ACPI_THERMAL=y > # CONFIG_ACPI_ASUS is not set > # CONFIG_ACPI_IBM is not set > # CONFIG_ACPI_TOSHIBA is not set > # CONFIG_ACPI_CUSTOM_DSDT is not set > CONFIG_ACPI_BLACKLIST_YEAR=0 > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_EC=y > CONFIG_ACPI_POWER=y > CONFIG_ACPI_SYSTEM=y > CONFIG_ACPI_CONTAINER=y > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_TABLE=y > # CONFIG_CPU_FREQ_DEBUG is not set > CONFIG_CPU_FREQ_STAT=y > # CONFIG_CPU_FREQ_STAT_DETAILS is not set > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=y > CONFIG_CPU_FREQ_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y > > # > # CPUFreq processor drivers > # > CONFIG_X86_POWERNOW_K8=y > CONFIG_X86_POWERNOW_K8_ACPI=y > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set > CONFIG_X86_ACPI_CPUFREQ=y > > # > # shared options > # > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set > # CONFIG_X86_SPEEDSTEP_LIB is not set > > # > # Bus options (PCI etc.) > # > CONFIG_PCI=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_MMCONFIG=y > CONFIG_UNORDERED_IO=y > CONFIG_PCIEPORTBUS=y > CONFIG_PCI_MSI=y > CONFIG_PCI_LEGACY_PROC=y > # CONFIG_PCI_DEBUG is not set > > # > # PCCARD (PCMCIA/CardBus) support > # > # CONFIG_PCCARD is not set > > # > # PCI Hotplug Support > # > # CONFIG_HOTPLUG_PCI is not set > > # > # Executable file formats / Emulations > # > CONFIG_BINFMT_ELF=y > CONFIG_BINFMT_MISC=y > CONFIG_IA32_EMULATION=y > # CONFIG_IA32_AOUT is not set > CONFIG_COMPAT=y > CONFIG_SYSVIPC_COMPAT=y > CONFIG_UID16=y > > # > # Networking > # > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_UNIX=y > # CONFIG_NET_KEY is not set > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_FIB_HASH=y > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_TUNNEL is not set > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_BIC=y > # CONFIG_IPV6 is not set > # CONFIG_NETFILTER is not set > > # > # DCCP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_DCCP is not set > > # > # SCTP Configuration (EXPERIMENTAL) > # > # CONFIG_IP_SCTP is not set > # CONFIG_ATM is not set > # CONFIG_BRIDGE is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_HAMRADIO is not set > # CONFIG_IRDA is not set > # CONFIG_BT is not set > # CONFIG_IEEE80211 is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > # CONFIG_STANDALONE is not set > CONFIG_PREVENT_FIRMWARE_BUILD=y > # CONFIG_FW_LOADER is not set > # CONFIG_DEBUG_DRIVER is not set > > # > # Connector - unified userspace <-> kernelspace linker > # > # CONFIG_CONNECTOR is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > CONFIG_PARPORT=y > CONFIG_PARPORT_PC=y > # CONFIG_PARPORT_SERIAL is not set > CONFIG_PARPORT_PC_FIFO=y > CONFIG_PARPORT_PC_SUPERIO=y > # CONFIG_PARPORT_GSC is not set > CONFIG_PARPORT_1284=y > > # > # Plug and Play support > # > CONFIG_PNP=y > # CONFIG_PNP_DEBUG is not set > > # > # Protocols > # > CONFIG_PNPACPI=y > > # > # Block devices > # > CONFIG_BLK_DEV_FD=m > # CONFIG_PARIDE is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_COW_COMMON is not set > # CONFIG_BLK_DEV_LOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_SX8 is not set > # CONFIG_BLK_DEV_UB is not set > # CONFIG_BLK_DEV_RAM is not set > CONFIG_BLK_DEV_RAM_COUNT=16 > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > > # > # ATA/ATAPI/MFM/RLL support > # > CONFIG_IDE=y > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_IDE_SATA is not set > # CONFIG_BLK_DEV_HD_IDE is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > CONFIG_BLK_DEV_IDEFLOPPY=y > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > > # > # IDE chipset support/bugfixes > # > # CONFIG_IDE_GENERIC is not set > # CONFIG_BLK_DEV_CMD640 is not set > # CONFIG_BLK_DEV_IDEPNP is not set > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > # CONFIG_BLK_DEV_OFFBOARD is not set > # CONFIG_BLK_DEV_GENERIC is not set > # CONFIG_BLK_DEV_OPTI621 is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > # CONFIG_BLK_DEV_AEC62XX is not set > CONFIG_BLK_DEV_ALI15X3=y > # CONFIG_WDC_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_ATIIXP is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > # CONFIG_BLK_DEV_SC1200 is not set > # CONFIG_BLK_DEV_PIIX is not set > # CONFIG_BLK_DEV_IT821X is not set > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIIMAGE is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_ARM is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_IVB is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_BLK_DEV_HD is not set > > # > # SCSI device support > # > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > CONFIG_CHR_DEV_SG=y > # CONFIG_CHR_DEV_SCH is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > # CONFIG_SCSI_MULTI_LUN is not set > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI Transport Attributes > # > # CONFIG_SCSI_SPI_ATTRS is not set > # CONFIG_SCSI_FC_ATTRS is not set > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_ATTRS is not set > > # > # SCSI low-level drivers > # > # CONFIG_ISCSI_TCP is not set > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_MEGARAID_NEWGEN is not set > # CONFIG_MEGARAID_LEGACY is not set > # CONFIG_MEGARAID_SAS is not set > CONFIG_SCSI_SATA=y > CONFIG_SCSI_SATA_AHCI=y > # CONFIG_SCSI_SATA_SVW is not set > # CONFIG_SCSI_ATA_PIIX is not set > # CONFIG_SCSI_SATA_MV is not set > # CONFIG_SCSI_SATA_NV is not set > # CONFIG_SCSI_PDC_ADMA is not set > # CONFIG_SCSI_SATA_QSTOR is not set > # CONFIG_SCSI_SATA_PROMISE is not set > # CONFIG_SCSI_SATA_SX4 is not set > # CONFIG_SCSI_SATA_SIL is not set > # CONFIG_SCSI_SATA_SIL24 is not set > # CONFIG_SCSI_SATA_SIS is not set > CONFIG_SCSI_SATA_ULI=y > # CONFIG_SCSI_SATA_VIA is not set > # CONFIG_SCSI_SATA_VITESSE is not set > CONFIG_SCSI_SATA_INTEL_COMBINED=y > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_EATA_PIO is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_PPA is not set > # CONFIG_SCSI_IMM is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > CONFIG_SCSI_QLA2XXX=y > # CONFIG_SCSI_QLA21XX is not set > # CONFIG_SCSI_QLA22XX is not set > # CONFIG_SCSI_QLA2300 is not set > # CONFIG_SCSI_QLA2322 is not set > # CONFIG_SCSI_QLA6312 is not set > # CONFIG_SCSI_QLA24XX is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_DEBUG is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_SPI is not set > # CONFIG_FUSION_FC is not set > # CONFIG_FUSION_SAS is not set > > # > # IEEE 1394 (FireWire) support > # > # CONFIG_IEEE1394 is not set > > # > # I2O device support > # > CONFIG_I2O=y > CONFIG_I2O_EXT_ADAPTEC=y > CONFIG_I2O_EXT_ADAPTEC_DMA64=y > CONFIG_I2O_CONFIG=y > CONFIG_I2O_CONFIG_OLD_IOCTL=y > CONFIG_I2O_BUS=y > CONFIG_I2O_BLOCK=y > CONFIG_I2O_SCSI=y > CONFIG_I2O_PROC=y > > # > # Network device support > # > CONFIG_NETDEVICES=y > CONFIG_DUMMY=y > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > # CONFIG_NET_SB1000 is not set > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > > # > # PHY device support > # > # CONFIG_PHYLIB is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > CONFIG_MII=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_CASSINI is not set > # CONFIG_NET_VENDOR_3COM is not set > > # > # Tulip family network device support > # > CONFIG_NET_TULIP=y > # CONFIG_DE2104X is not set > # CONFIG_TULIP is not set > # CONFIG_DE4X5 is not set > # CONFIG_WINBOND_840 is not set > # CONFIG_DM9102 is not set > CONFIG_ULI526X=m > # CONFIG_HP100 is not set > # CONFIG_NET_PCI is not set > # CONFIG_NET_POCKET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_R8169 is not set > # CONFIG_SIS190 is not set > # CONFIG_SKGE is not set > # CONFIG_SK98LIN is not set > # CONFIG_TIGON3 is not set > # CONFIG_BNX2 is not set > > # > # Ethernet (10000 Mbit) > # > # CONFIG_CHELSIO_T1 is not set > # CONFIG_IXGB is not set > # CONFIG_S2IO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PLIP is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_NET_FC is not set > # CONFIG_SHAPER is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_TSDEV is not set > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_LKKBD is not set > # CONFIG_KEYBOARD_XTKBD is not set > # CONFIG_KEYBOARD_NEWTON is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TOUCHSCREEN is not set > # CONFIG_INPUT_MISC is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_I8042=y > # CONFIG_SERIO_SERPORT is not set > # CONFIG_SERIO_CT82C710 is not set > # CONFIG_SERIO_PARKBD is not set > # CONFIG_SERIO_PCIPS2 is not set > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > # CONFIG_SERIAL_NONSTANDARD is not set > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > # CONFIG_SERIAL_8250_CONSOLE is not set > # CONFIG_SERIAL_8250_ACPI is not set > CONFIG_SERIAL_8250_NR_UARTS=4 > # CONFIG_SERIAL_8250_EXTENDED is not set > > # > # Non-8250 serial port support > # > CONFIG_SERIAL_CORE=y > # CONFIG_SERIAL_JSM is not set > CONFIG_UNIX98_PTYS=y > CONFIG_LEGACY_PTYS=y > CONFIG_LEGACY_PTY_COUNT=256 > CONFIG_PRINTER=y > CONFIG_LP_CONSOLE=y > # CONFIG_PPDEV is not set > # CONFIG_TIPAR is not set > > # > # IPMI > # > # CONFIG_IPMI_HANDLER is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_HW_RANDOM is not set > CONFIG_NVRAM=y > CONFIG_RTC=y > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_FTAPE is not set > CONFIG_AGP=y > CONFIG_AGP_AMD64=y > # CONFIG_AGP_INTEL is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > # CONFIG_RAW_DRIVER is not set > CONFIG_HPET=y > # CONFIG_HPET_RTC_IRQ is not set > CONFIG_HPET_MMAP=y > # CONFIG_HANGCHECK_TIMER is not set > > # > # TPM devices > # > # CONFIG_TCG_TPM is not set > # CONFIG_TELCLOCK is not set > > # > # I2C support > # > CONFIG_I2C=y > CONFIG_I2C_CHARDEV=y > > # > # I2C Algorithms > # > CONFIG_I2C_ALGOBIT=y > # CONFIG_I2C_ALGOPCF is not set > # CONFIG_I2C_ALGOPCA is not set > > # > # I2C Hardware Bus support > # > # CONFIG_I2C_ALI1535 is not set > CONFIG_I2C_ALI1563=y > # CONFIG_I2C_ALI15X3 is not set > # CONFIG_I2C_AMD756 is not set > # CONFIG_I2C_AMD8111 is not set > # CONFIG_I2C_I801 is not set > # CONFIG_I2C_I810 is not set > # CONFIG_I2C_PIIX4 is not set > CONFIG_I2C_ISA=y > # CONFIG_I2C_NFORCE2 is not set > # CONFIG_I2C_PARPORT is not set > # CONFIG_I2C_PARPORT_LIGHT is not set > # CONFIG_I2C_PROSAVAGE is not set > # CONFIG_I2C_SAVAGE4 is not set > # CONFIG_SCx200_ACB is not set > # CONFIG_I2C_SIS5595 is not set > # CONFIG_I2C_SIS630 is not set > # CONFIG_I2C_SIS96X is not set > # CONFIG_I2C_STUB is not set > # CONFIG_I2C_VIA is not set > # CONFIG_I2C_VIAPRO is not set > # CONFIG_I2C_VOODOO3 is not set > # CONFIG_I2C_PCA_ISA is not set > > # > # Miscellaneous I2C Chip support > # > # CONFIG_SENSORS_DS1337 is not set > # CONFIG_SENSORS_DS1374 is not set > CONFIG_SENSORS_EEPROM=y > # CONFIG_SENSORS_PCF8574 is not set > # CONFIG_SENSORS_PCA9539 is not set > # CONFIG_SENSORS_PCF8591 is not set > # CONFIG_SENSORS_RTC8564 is not set > # CONFIG_SENSORS_MAX6875 is not set > # CONFIG_RTC_X1205_I2C is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > # CONFIG_I2C_DEBUG_CHIP is not set > > # > # Dallas's 1-wire bus > # > # CONFIG_W1 is not set > > # > # Hardware Monitoring support > # > CONFIG_HWMON=y > CONFIG_HWMON_VID=y > # CONFIG_SENSORS_ADM1021 is not set > # CONFIG_SENSORS_ADM1025 is not set > # CONFIG_SENSORS_ADM1026 is not set > # CONFIG_SENSORS_ADM1031 is not set > # CONFIG_SENSORS_ADM9240 is not set > # CONFIG_SENSORS_ASB100 is not set > # CONFIG_SENSORS_ATXP1 is not set > # CONFIG_SENSORS_DS1621 is not set > # CONFIG_SENSORS_FSCHER is not set > # CONFIG_SENSORS_FSCPOS is not set > # CONFIG_SENSORS_GL518SM is not set > # CONFIG_SENSORS_GL520SM is not set > # CONFIG_SENSORS_IT87 is not set > # CONFIG_SENSORS_LM63 is not set > CONFIG_SENSORS_LM75=y > # CONFIG_SENSORS_LM77 is not set > # CONFIG_SENSORS_LM78 is not set > # CONFIG_SENSORS_LM80 is not set > # CONFIG_SENSORS_LM83 is not set > # CONFIG_SENSORS_LM85 is not set > # CONFIG_SENSORS_LM87 is not set > # CONFIG_SENSORS_LM90 is not set > # CONFIG_SENSORS_LM92 is not set > # CONFIG_SENSORS_MAX1619 is not set > # CONFIG_SENSORS_PC87360 is not set > # CONFIG_SENSORS_SIS5595 is not set > # CONFIG_SENSORS_SMSC47M1 is not set > # CONFIG_SENSORS_SMSC47B397 is not set > # CONFIG_SENSORS_VIA686A is not set > # CONFIG_SENSORS_W83781D is not set > # CONFIG_SENSORS_W83792D is not set > # CONFIG_SENSORS_W83L785TS is not set > CONFIG_SENSORS_W83627HF=y > # CONFIG_SENSORS_W83627EHF is not set > # CONFIG_SENSORS_HDAPS is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Misc devices > # > # CONFIG_IBM_ASM is not set > > # > # Multimedia Capabilities Port drivers > # > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # Digital Video Broadcasting Devices > # > # CONFIG_DVB is not set > > # > # Graphics support > # > CONFIG_FB=y > CONFIG_FB_CFB_FILLRECT=y > CONFIG_FB_CFB_COPYAREA=y > CONFIG_FB_CFB_IMAGEBLIT=y > # CONFIG_FB_MACMODES is not set > # CONFIG_FB_MODE_HELPERS is not set > # CONFIG_FB_TILEBLITTING is not set > # CONFIG_FB_CIRRUS is not set > # CONFIG_FB_PM2 is not set > # CONFIG_FB_CYBER2000 is not set > # CONFIG_FB_ARC is not set > # CONFIG_FB_ASILIANT is not set > # CONFIG_FB_IMSTT is not set > # CONFIG_FB_VGA16 is not set > CONFIG_FB_VESA=y > CONFIG_VIDEO_SELECT=y > # CONFIG_FB_HGA is not set > # CONFIG_FB_S1D13XXX is not set > # CONFIG_FB_NVIDIA is not set > # CONFIG_FB_RIVA is not set > # CONFIG_FB_MATROX is not set > # CONFIG_FB_RADEON_OLD is not set > # CONFIG_FB_RADEON is not set > # CONFIG_FB_ATY128 is not set > # CONFIG_FB_ATY is not set > # CONFIG_FB_SAVAGE is not set > # CONFIG_FB_SIS is not set > # CONFIG_FB_NEOMAGIC is not set > # CONFIG_FB_KYRO is not set > # CONFIG_FB_3DFX is not set > # CONFIG_FB_VOODOO1 is not set > # CONFIG_FB_CYBLA is not set > # CONFIG_FB_TRIDENT is not set > # CONFIG_FB_PM3 is not set > # CONFIG_FB_GEODE is not set > # CONFIG_FB_VIRTUAL is not set > > # > # Console display driver support > # > CONFIG_VGA_CONSOLE=y > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=y > # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set > # CONFIG_FONTS is not set > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > > # > # Logo configuration > # > CONFIG_LOGO=y > # CONFIG_LOGO_LINUX_MONO is not set > # CONFIG_LOGO_LINUX_VGA16 is not set > CONFIG_LOGO_LINUX_CLUT224=y > # CONFIG_BACKLIGHT_LCD_SUPPORT is not set > > # > # Sound > # > CONFIG_SOUND=y > > # > # Advanced Linux Sound Architecture > # > CONFIG_SND=y > CONFIG_SND_AC97_CODEC=y > CONFIG_SND_AC97_BUS=y > CONFIG_SND_TIMER=y > CONFIG_SND_PCM=y > CONFIG_SND_SEQUENCER=y > CONFIG_SND_SEQ_DUMMY=y > CONFIG_SND_OSSEMUL=y > CONFIG_SND_MIXER_OSS=y > CONFIG_SND_PCM_OSS=y > CONFIG_SND_SEQUENCER_OSS=y > CONFIG_SND_RTCTIMER=y > CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y > # CONFIG_SND_VERBOSE_PRINTK is not set > # CONFIG_SND_DEBUG is not set > > # > # Generic devices > # > # CONFIG_SND_DUMMY is not set > # CONFIG_SND_VIRMIDI is not set > # CONFIG_SND_MTPAV is not set > # CONFIG_SND_SERIAL_U16550 is not set > # CONFIG_SND_MPU401 is not set > > # > # PCI devices > # > # CONFIG_SND_ALI5451 is not set > # CONFIG_SND_ATIIXP is not set > # CONFIG_SND_ATIIXP_MODEM is not set > # CONFIG_SND_AU8810 is not set > # CONFIG_SND_AU8820 is not set > # CONFIG_SND_AU8830 is not set > # CONFIG_SND_AZT3328 is not set > # CONFIG_SND_BT87X is not set > # CONFIG_SND_CS46XX is not set > # CONFIG_SND_CS4281 is not set > # CONFIG_SND_EMU10K1 is not set > # CONFIG_SND_EMU10K1X is not set > # CONFIG_SND_CA0106 is not set > # CONFIG_SND_KORG1212 is not set > # CONFIG_SND_MIXART is not set > # CONFIG_SND_NM256 is not set > # CONFIG_SND_RME32 is not set > # CONFIG_SND_RME96 is not set > # CONFIG_SND_RME9652 is not set > # CONFIG_SND_HDSP is not set > # CONFIG_SND_HDSPM is not set > # CONFIG_SND_TRIDENT is not set > # CONFIG_SND_YMFPCI is not set > # CONFIG_SND_AD1889 is not set > # CONFIG_SND_ALS4000 is not set > # CONFIG_SND_CMIPCI is not set > # CONFIG_SND_ENS1370 is not set > # CONFIG_SND_ENS1371 is not set > # CONFIG_SND_ES1938 is not set > # CONFIG_SND_ES1968 is not set > # CONFIG_SND_MAESTRO3 is not set > # CONFIG_SND_FM801 is not set > # CONFIG_SND_ICE1712 is not set > # CONFIG_SND_ICE1724 is not set > CONFIG_SND_INTEL8X0=y > # CONFIG_SND_INTEL8X0M is not set > # CONFIG_SND_SONICVIBES is not set > # CONFIG_SND_VIA82XX is not set > # CONFIG_SND_VIA82XX_MODEM is not set > # CONFIG_SND_VX222 is not set > # CONFIG_SND_HDA_INTEL is not set > > # > # USB devices > # > # CONFIG_SND_USB_AUDIO is not set > # CONFIG_SND_USB_USX2Y is not set > > # > # Open Sound System > # > # CONFIG_SOUND_PRIME is not set > > # > # USB support > # > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > CONFIG_USB_DYNAMIC_MINORS=y > CONFIG_USB_SUSPEND=y > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_SPLIT_ISO=y > CONFIG_USB_EHCI_ROOT_HUB_TT=y > # CONFIG_USB_ISP116X_HCD is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > # CONFIG_USB_UHCI_HCD is not set > # CONFIG_USB_SL811_HCD is not set > > # > # USB Device Class drivers > # > # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > > # > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' > # > > # > # may also be needed; see USB_STORAGE Help for more information > # > CONFIG_USB_STORAGE=y > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_USBAT is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > > # > # USB Input Devices > # > # CONFIG_USB_HID is not set > > # > # USB HID Boot Protocol drivers > # > # CONFIG_USB_KBD is not set > # CONFIG_USB_MOUSE is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_ACECAD is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_MTOUCH is not set > # CONFIG_USB_ITMTOUCH is not set > # CONFIG_USB_EGALAX is not set > # CONFIG_USB_YEALINK is not set > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # CONFIG_USB_KEYSPAN_REMOTE is not set > # CONFIG_USB_APPLETOUCH is not set > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB Multimedia devices > # > # CONFIG_USB_DABUSB is not set > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > CONFIG_USB_MON=y > > # > # USB port drivers > # > # CONFIG_USB_USS720 is not set > > # > # USB Serial Converter support > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_PHIDGETKIT is not set > # CONFIG_USB_PHIDGETSERVO is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TEST is not set > > # > # USB DSL modem support > # > > # > # USB Gadget Support > # > # CONFIG_USB_GADGET is not set > > # > # MMC/SD Card support > # > # CONFIG_MMC is not set > > # > # InfiniBand support > # > # CONFIG_INFINIBAND is not set > > # > # SN Devices > # > > # > # Firmware Drivers > # > # CONFIG_EDD is not set > # CONFIG_DELL_RBU is not set > # CONFIG_DCDBAS is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > # CONFIG_EXT3_FS_XATTR is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > CONFIG_REISERFS_FS=y > # CONFIG_REISERFS_CHECK is not set > # CONFIG_REISERFS_PROC_INFO is not set > # CONFIG_REISERFS_FS_XATTR is not set > # CONFIG_JFS_FS is not set > CONFIG_FS_POSIX_ACL=y > # CONFIG_XFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_INOTIFY=y > # CONFIG_QUOTA is not set > CONFIG_DNOTIFY=y > # CONFIG_AUTOFS_FS is not set > CONFIG_AUTOFS4_FS=y > CONFIG_FUSE_FS=y > > # > # CD-ROM/DVD Filesystems > # > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > CONFIG_ZISOFS=y > CONFIG_ZISOFS_FS=y > CONFIG_UDF_FS=y > CONFIG_UDF_NLS=y > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > CONFIG_NTFS_FS=y > # CONFIG_NTFS_DEBUG is not set > CONFIG_NTFS_RW=y > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_KCORE=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_HUGETLBFS is not set > # CONFIG_HUGETLB_PAGE is not set > CONFIG_RAMFS=y > # CONFIG_RELAYFS_FS is not set > > # > # Miscellaneous filesystems > # > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > # CONFIG_CRAMFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > # CONFIG_NFS_V3_ACL is not set > CONFIG_NFS_V4=y > CONFIG_NFS_DIRECTIO=y > CONFIG_NFSD=y > CONFIG_NFSD_V3=y > # CONFIG_NFSD_V3_ACL is not set > CONFIG_NFSD_V4=y > CONFIG_NFSD_TCP=y > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_EXPORTFS=y > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=y > CONFIG_SUNRPC_GSS=y > CONFIG_RPCSEC_GSS_KRB5=y > # CONFIG_RPCSEC_GSS_SPKM3 is not set > CONFIG_SMB_FS=y > # CONFIG_SMB_NLS_DEFAULT is not set > CONFIG_CIFS=y > # CONFIG_CIFS_STATS is not set > # CONFIG_CIFS_XATTR is not set > # CONFIG_CIFS_EXPERIMENTAL is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > # CONFIG_9P_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > > # > # Native Language Support > # > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="utf8" > CONFIG_NLS_CODEPAGE_437=y > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > CONFIG_NLS_CODEPAGE_850=y > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ASCII is not set > CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > CONFIG_NLS_UTF8=y > > # > # Instrumentation Support > # > # CONFIG_PROFILING is not set > # CONFIG_KPROBES is not set > > # > # Kernel hacking > # > # CONFIG_PRINTK_TIME is not set > CONFIG_DEBUG_KERNEL=y > CONFIG_MAGIC_SYSRQ=y > CONFIG_LOG_BUF_SHIFT=15 > # CONFIG_DETECT_SOFTLOCKUP is not set > # CONFIG_SCHEDSTATS is not set > # CONFIG_DEBUG_SLAB is not set > # CONFIG_DEBUG_PREEMPT is not set > # CONFIG_DEBUG_SPINLOCK is not set > # CONFIG_DEBUG_SPINLOCK_SLEEP is not set > # CONFIG_DEBUG_KOBJECT is not set > # CONFIG_DEBUG_INFO is not set > # CONFIG_DEBUG_FS is not set > # CONFIG_DEBUG_VM is not set > # CONFIG_FRAME_POINTER is not set > # CONFIG_RCU_TORTURE_TEST is not set > # CONFIG_INIT_DEBUG is not set > # CONFIG_IOMMU_DEBUG is not set > > # > # Security options > # > # CONFIG_KEYS is not set > # CONFIG_SECURITY is not set > > # > # Cryptographic options > # > CONFIG_CRYPTO=y > # CONFIG_CRYPTO_HMAC is not set > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_MD4 is not set > CONFIG_CRYPTO_MD5=y > # CONFIG_CRYPTO_SHA1 is not set > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_WP512 is not set > # CONFIG_CRYPTO_TGR192 is not set > CONFIG_CRYPTO_DES=y > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_TWOFISH is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_AES_X86_64 is not set > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_ARC4 is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_ANUBIS is not set > # CONFIG_CRYPTO_DEFLATE is not set > # CONFIG_CRYPTO_MICHAEL_MIC is not set > # CONFIG_CRYPTO_CRC32C is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Hardware crypto devices > # > > # > # Library routines > # > # CONFIG_CRC_CCITT is not set > # CONFIG_CRC16 is not set > CONFIG_CRC32=y > # CONFIG_LIBCRC32C is not set > CONFIG_ZLIB_INFLATE=y - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/