Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Sameer Pujar <spujar@nvidia.com>
To:     <broonie@kernel.org>
CC:     <jonathanh@nvidia.com>, <linux-kernel@vger.kernel.org>,
        <linux-tegra@vger.kernel.org>, Sameer Pujar <spujar@nvidia.com>
Subject: [PATCH] regmap: add iopoll-like atomic polling macro
Date:   Tue, 7 Jan 2020 15:58:09 +0530
Message-ID: <1578392889-16587-1-git-send-email-spujar@nvidia.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patch adds a macro 'regmap_read_poll_timeout_atomic' that works
similar to 'readx_poll_timeout_atomic' defined in linux/iopoll.h; This
is atomic version of already available 'regmap_read_poll_timeout' macro.

Signed-off-by: Sameer Pujar <spujar@nvidia.com>
---
 include/linux/regmap.h | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index dfe493a..09d79ea 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -145,6 +145,47 @@ struct reg_sequence {
 })
 
 /**
+ * regmap_read_poll_timeout_atomic - Poll until a condition is met or a timeout occurs
+ *
+ * @map: Regmap to read from
+ * @addr: Address to poll
+ * @val: Unsigned integer variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @delay_us: Time to udelay between reads in us (0 tight-loops).
+ *            Should be less than ~10us since udelay is used
+ *            (see Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val.
+ *
+ * This is modelled after the readx_poll_timeout_atomic macros in linux/iopoll.h.
+ */
+#define regmap_read_poll_timeout_atomic(map, addr, val, cond, delay_us, timeout_us) \
+({ \
+	u64 __timeout_us = (timeout_us); \
+	unsigned long __delay_us = (delay_us); \
+	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+	int __ret; \
+	for (;;) { \
+		__ret = regmap_read((map), (addr), &(val)); \
+		if (__ret) \
+			break; \
+		if (cond) \
+			break; \
+		if ((__timeout_us) && \
+		    ktime_compare(ktime_get(), __timeout) > 0) { \
+			__ret = regmap_read((map), (addr), &(val)); \
+			break; \
+		} \
+		if (__delay_us) \
+			udelay(__delay_us); \
+	} \
+	__ret ?: ((cond) ? 0 : -ETIMEDOUT); \
+})
+
+/**
  * regmap_field_read_poll_timeout - Poll until a condition is met or timeout
  *
  * @field: Regmap field to read from
-- 
2.7.4