Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Marco Felsch <m.felsch@pengutronix.de>
To:     support.opensource@diasemi.com, lee.jones@linaro.org,
        robh+dt@kernel.org, linus.walleij@linaro.org,
        Adam.Thomson.Opensource@diasemi.com
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        kernel@pengutronix.de, linux-gpio@vger.kernel.org
Subject: [PATCH v4 0/3] Add DA9062 GPIO support
Date:   Wed,  8 Jan 2020 11:47:43 +0100
Message-Id: <20200108104746.1765-1-m.felsch@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

this v4 adds the missing PIN_CONFIG_BIAS_DISABLE support so
pull-ups/-downs can be disconnected. I also added all git-tag already
made on my v3 [1].

@Lee
checkpatch complains about the "Acked-for-MFD-by" tag. I kept it but is
this behaviour on purpose?

Regards,
  Marco

[1] https://lkml.org/lkml/2019/12/12/601

Marco Felsch (3):
  dt-bindings: mfd: da9062: add gpio bindings
  mfd: da9062: add support for the DA9062 GPIOs in the core
  pinctrl: da9062: add driver support

 .../devicetree/bindings/mfd/da9062.txt        |  10 +
 MAINTAINERS                                   |   1 +
 drivers/mfd/da9062-core.c                     |  16 +-
 drivers/pinctrl/Kconfig                       |  12 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/pinctrl-da9062.c              | 300 ++++++++++++++++++
 6 files changed, 339 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pinctrl/pinctrl-da9062.c

-- 
2.20.1