Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH 0/3] Fix issues with command queuing in arasan controllers
To:     <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>
CC:     <ulf.hansson@linaro.org>, <adrian.hunter@intel.com>,
        <shawn.lin@rock-chips.com>
References: <20191230092343.30692-1-faiz_abbas@ti.com>
From:   Faiz Abbas <faiz_abbas@ti.com>
Message-ID: <837996b2-c69f-1446-fda4-5577e28ba8e1@ti.com>
Date:   Wed, 8 Jan 2020 17:00:11 +0530
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.2.2
MIME-Version: 1.0
In-Reply-To: <20191230092343.30692-1-faiz_abbas@ti.com>
Content-Type: text/plain; charset="utf-8"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

On 30/12/19 2:53 pm, Faiz Abbas wrote:
> In some Arasan SDHCI controllers, after tuning, the tuning pattern data
> is leftover in the sdhci buffer. This leads to issues with future data
> commands, especially when command queuing is enabled. The following
> patches help fix this issue by resetting data lines after tuning is
> finished. The first two patches have been tested with TI's am65x and
> j721e SoCs using the sdhci_am654 driver.
> 
> I have a strong suspicion that this is the same issue with
> the sdhci-of-arasan driver where they are forced to dump data from the
> buffer before enabling command queuing. I need help from someone with a
> compatible platform to test this.
> 

I had some discussions with our hardware team and they say we should be
asserting both SRC and SRD reset after tuning to start from a clean
state. Will update the patches to do that in v2.

Thanks,
Faiz