Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 08 Jan 2020 15:58:52 +0000
From:   Mark Brown <broonie@kernel.org>
To:     Saravanan Sekar <sravanhome@gmail.com>
Cc:     broonie@kernel.org, davem@davemloft.net,
        devicetree@vger.kernel.org, gregkh@linuxfoundation.org,
        heiko@sntech.de, icenowy@aosc.io, Jonathan.Cameron@huawei.com,
        laurent.pinchart@ideasonboard.com, lgirdwood@gmail.com,
        linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
        mark.rutland@arm.com, mchehab+samsung@kernel.org,
        mripard@kernel.org, robh+dt@kernel.org, sam@ravnborg.org,
        shawnguo@kernel.org, sravanhome@gmail.com
Subject: Applied "regulator: bindings: add document bindings for mpq7920" to the regulator tree
In-Reply-To: <20200108131234.24128-3-sravanhome@gmail.com>
Message-Id: <applied-20200108131234.24128-3-sravanhome@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The patch

   regulator: bindings: add document bindings for mpq7920

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.6

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From f5fa59a61ecac5efcb77b294a10134aab358bb5c Mon Sep 17 00:00:00 2001
From: Saravanan Sekar <sravanhome@gmail.com>
Date: Wed, 8 Jan 2020 14:12:32 +0100
Subject: [PATCH] regulator: bindings: add document bindings for mpq7920

Add device tree binding information for mpq7920 regulator driver.
Example bindings for mpq7920 are added.

Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20200108131234.24128-3-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../bindings/regulator/mps,mpq7920.yaml       | 202 ++++++++++++++++++
 1 file changed, 202 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml

diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
new file mode 100644
index 000000000000..598f3ea070c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MPQ7920 PMIC
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - mps,mpq7920
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
+
+      mps,switch-freq:
+        description: |
+          switching frequency must be one of following corresponding value
+          1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
+        $ref: "/schemas/types.yaml#/definitions/uint8"
+        enum: [ 0, 1, 2, 3 ]
+        default: 2
+
+      buck1:
+        type: object
+        $ref: "regulator.yaml#"
+        description: |
+          4.5A DC-DC step down converter
+
+        mps,buck-softstart:
+           $ref: "/schemas/types.yaml#/definitions/uint8"
+           enum: [ 0, 1, 2, 3 ]
+           default: 1
+           description: |
+             defines the soft start time of this buck, must be one of the following
+             corresponding values 150us, 300us, 610us, 920us
+
+         mps,buck-phase-delay:
+           $ref: "/schemas/types.yaml#/definitions/uint8"
+           enum: [ 0, 1, 2, 3 ]
+           default: 0
+           description: |
+             defines the phase delay of this buck, must be one of the following
+             corresponding values 0deg, 90deg, 180deg, 270deg
+
+         mps,buck-ovp-disable:
+           type: boolean
+           description: |
+             disables over voltage protection of this buck
+
+      buck2:
+        type: object
+        $ref: "regulator.yaml#"
+        description: |
+          2.5A DC-DC step down converter
+
+        mps,buck-softstart:
+          description: |
+            defines the soft start time of this buck, must be one of the following
+            corresponding values 150us, 300us, 610us, 920us
+          $ref: "/schemas/types.yaml#/definitions/uint8"
+          enum: [ 0, 1, 2, 3 ]
+          default: 1
+
+        mps,buck-phase-delay:
+          description: |
+            defines the phase delay of this buck, must be one of the following
+            corresponding values 0deg, 90deg, 180deg, 270deg
+          $ref: "/schemas/types.yaml#/definitions/uint8"
+          enum: [ 0, 1, 2, 3 ]
+          default: 0
+
+        mps,buck-ovp-disable:
+          description: |
+            disables over voltage protection of this buck
+          type: boolean
+
+      buck3:
+        type: object
+        $ref: "regulator.yaml#"
+        description: |
+          4.5A DC-DC step down converter
+
+        mps,buck-softstart:
+           description: |
+             defines the soft start time of this buck, must be one of the following
+             corresponding values 150us, 300us, 610us, 920us
+           $ref: "/schemas/types.yaml#/definitions/uint8"
+           enum: [ 0, 1, 2, 3 ]
+           default: 1
+
+         mps,buck-phase-delay:
+           description: |
+             defines the phase delay of this buck, must be one of the following
+             corresponding values 0deg, 90deg, 180deg, 270deg
+           $ref: "/schemas/types.yaml#/definitions/uint8"
+           enum: [ 0, 1, 2, 3 ]
+           default: 1
+
+         mps,buck-ovp-disable:
+           description: |
+             disables over voltage protection of this buck
+           type: boolean
+
+      buck4:
+        type: object
+        $ref: "regulator.yaml#"
+        description: |
+          2.5A DC-DC step down converter
+
+        mps,buck-softstart:
+          description: |
+            defines the soft start time of this buck, must be one of the following
+            corresponding values 150us, 300us, 610us, 920us
+          $ref: "/schemas/types.yaml#/definitions/uint8"
+          enum: [ 0, 1, 2, 3 ]
+          default: 1
+
+        mps,buck-phase-delay:
+          description: |
+            defines the phase delay of this buck, must be one of the following
+            corresponding values 0deg, 90deg, 180deg, 270deg
+          $ref: "/schemas/types.yaml#/definitions/uint8"
+          enum: [ 0, 1, 2, 3 ]
+          default: 1
+
+        mps,buck-ovp-disable:
+          description: |
+            disables over voltage protection of this buck
+          type: boolean
+
+      ldortc:
+        $ref: "regulator.yaml#"
+        description: |
+          regulator with 0.65V-3.5875V for RTC, always enabled
+
+      ldo2:
+        $ref: "regulator.yaml#"
+        description: |
+          regulator with 0.65V-3.5875V
+
+      ldo3:
+        $ref: "regulator.yaml#"
+        description: |
+          regulator with 0.65V-3.5875V
+
+      ldo4:
+        $ref: "regulator.yaml#"
+        description: |
+          regulator with 0.65V-3.5875V
+
+      ldo5:
+        $ref: "regulator.yaml#"
+        description: |
+          regulator with 0.65V-3.5875V
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+          compatible = "mps,mpq7920";
+          reg = <0x69>;
+
+          regulators {
+            mps,switch-freq = <1>;
+
+            buck1 {
+             regulator-name = "buck1";
+             regulator-min-microvolt = <400000>;
+             regulator-max-microvolt = <3587500>;
+             regulator-min-microamp  = <460000>;
+             regulator-max-microamp  = <7600000>;
+             regulator-boot-on;
+             mps,buck-ovp-disable;
+             mps,buck-phase-delay = <2>;
+             mps,buck-softstart = <1>;
+            };
+
+            ldo2 {
+             regulator-name = "ldo2";
+             regulator-min-microvolt = <650000>;
+             regulator-max-microvolt = <3587500>;
+            };
+         };
+       };
+     };
+...
-- 
2.20.1