Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20200110080211.22626-1-kai.heng.feng@canonical.com> <Pine.LNX.4.44L0.2001101038390.1467-100000@iolanthe.rowland.org>
In-Reply-To: <Pine.LNX.4.44L0.2001101038390.1467-100000@iolanthe.rowland.org>
From:   Kai-Heng Feng <kai.heng.feng@canonical.com>
Date:   Fri, 10 Jan 2020 23:51:58 +0800
Message-ID: <CAAd53p56QynOLJPi3kKiQB1iScrDxj3X1FiycuVF7tP75yPD8A@mail.gmail.com>
Subject: Re: [PATCH v2 3/3] USB: Disable LPM on WD19's Realtek Hub
To:     Alan Stern <stern@rowland.harvard.edu>
Cc:     Mathias Nyman <mathias.nyman@intel.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        AceLan Kao <acelan.kao@canonical.com>,
        USB list <linux-usb@vger.kernel.org>,
        LKML <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Jan 10, 2020 at 11:40 PM Alan Stern <stern@rowland.harvard.edu> wrote:
>
> On Fri, 10 Jan 2020, Kai-Heng Feng wrote:
>
> > Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the
> > bus when bringing underlying ports from U3 to U0.
> >
> > Disabling LPM on the hub during setting link state is not enough, so
> > let's disable LPM completely for this hub.
> >
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > ---
> >  drivers/usb/core/quirks.c | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
> > index 6b6413073584..2fb7c1602280 100644
> > --- a/drivers/usb/core/quirks.c
> > +++ b/drivers/usb/core/quirks.c
> > @@ -371,6 +371,9 @@ static const struct usb_device_id usb_quirk_list[] = {
> >       { USB_DEVICE(0x0b05, 0x17e0), .driver_info =
> >                       USB_QUIRK_IGNORE_REMOTE_WAKEUP },
> >
> > +     /* Realtek hub in Dell WD19 (Type-C) */
> > +     { USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
> > +
> >       /* Action Semiconductor flash disk */
> >       { USB_DEVICE(0x10d6, 0x2200), .driver_info =
> >                       USB_QUIRK_STRING_FETCH_255 },
> >
>
> This is a very partial patch.  There were four hunks in the original
> version but there's only one hunk in V2.

Because the original approach is insufficient, it significantly
reduced the fail rate but the issue is still there.
USB_QUIRK_NO_LPM is used instead so no other parts are needed.

Kai-Heng

>
> Alan Stern
>