Received: by 2002:a25:8b91:0:0:0:0:0 with SMTP id j17csp5352947ybl; Tue, 14 Jan 2020 07:35:10 -0800 (PST) X-Google-Smtp-Source: APXvYqwDnxh+v+cDRHMtXZbYYoFNJPUmOOOxDC8YyBwGXN4g+Gj9GkunTKEPI8X+mP85jtdxpcFm X-Received: by 2002:a05:6830:1607:: with SMTP id g7mr17434047otr.320.1579016110224; Tue, 14 Jan 2020 07:35:10 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1579016110; cv=none; d=google.com; s=arc-20160816; b=MjidwuE6ExJrn6vxWEmGF+7z1D7zhPkl0nMuEJADEvT3fXW05k3TWlP1mDd8bVsaOx X/o0AnLpw+Kh8u7Mr317D31jq/3nkTbRHkMHdPRRlcdFD3jLRCo4MLp45GFqK+gV2zEy kIIzy/xih6Lnb+JJmegvhipr3JOfNAM8srbz+7TTKrroac1Y8uNAJaJTaIy/SU4a1M3W ECL40ne+VLUIEXZ4UbldvVw5NO85VmU0r1CzfVDoFrHLxTC5EMUZdZPUkUzsyKyf7B07 0ML3edThyak7ezVL/E1r0ACYge/4Ydhb5Pubio6+9NfjFMW6zCbw/1iyyjwNAq/WpnQu j+BA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:cc:to:subject:message-id:date:from :in-reply-to:references:mime-version:dkim-signature; bh=yNT9MtZOXnBbt3j83P/1FfWRua0ExXT3bXy6Tpb0oDk=; b=ZGS18XGFLNpkskXU6UL4VEfmR4ZrigpWiex5ZIjJ6M40gdgU5PnocwhsCnPqbKAX5S r1GTQr63JG9Bl40y9KdfOxFnQjzTdrG48DwCIJ0za9Zl0I7RipquCxe2tqeA96boD2/1 ybwPkJFf/tiOU3IH04UodzglV/HpG0UwHxqj2TdZseq3JWbnzH9+fsoKkQCHxCsuVtYu 7BTCVKkC+yDHXs4XKCz/F0xSmWitobuagwou/DaB0NRxHusFfl2/9ZlU+r2B3M6T2dc7 S4/9BG7m5OqRbVO+vWw3HNMwpafN47DjgLsOrZ6eD6oNVY8NvIT3SFbPtMm5xvPgNjBx 9qoA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@chromium.org header.s=google header.b=WrtEb6ys; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=chromium.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id i65si8169025oif.15.2020.01.14.07.34.57; Tue, 14 Jan 2020 07:35:10 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@chromium.org header.s=google header.b=WrtEb6ys; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=chromium.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727073AbgANPeE (ORCPT + 99 others); Tue, 14 Jan 2020 10:34:04 -0500 Received: from mail-io1-f65.google.com ([209.85.166.65]:34024 "EHLO mail-io1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726342AbgANPeE (ORCPT ); Tue, 14 Jan 2020 10:34:04 -0500 Received: by mail-io1-f65.google.com with SMTP id z193so14271345iof.1 for ; Tue, 14 Jan 2020 07:34:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=yNT9MtZOXnBbt3j83P/1FfWRua0ExXT3bXy6Tpb0oDk=; b=WrtEb6ysYoIM2/88wA0hpUCCSEU3QCSTtNayYjL3paam26GeXUEv+u7vTshsJ8N3/c iE11t1Zh1PjlOPfBtWoYxAPMhYZ00B2PHf4jAzysv8zCDQ9u9s1I4WvAbvdQYvLK9GpU nErk/hm0h2tBYTSXNq0d7yd7GtMQ7BLMOB2zk= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=yNT9MtZOXnBbt3j83P/1FfWRua0ExXT3bXy6Tpb0oDk=; b=QlMl2PPwYI80sybfd599WOvkbpXOX0A+bmasyAHK6ZDmMP1gSvldVoG03c81ZkzfxE BsYjdEOiPtUT00wqvBaBqadRhUNjTGnQLWss/Xv2y0aUi4mJB31FCKLaIYDu44G1LxWC c46/YRT1n3OGh3gGfan9/5jsIkKwHVNFFDMPA4vxviiXaLUtyLAkqOxFtufxrq8vC6bp /FRS+/zkRn0lDs+8aQqv11/RiZAYPQoFu8i9AL5GYNj7DMEkRNRSalqhsYQDQRuVaTOt EyPuWm77rMHNnOZ52b6MJnzWRPuEMCUHu0IIDgPEInNuwxeDhm84ykW15IzsYFY2NVUR X33Q== X-Gm-Message-State: APjAAAXrB34GOcO8wApZpFrhnbVOb2QLr5NoEx1JLTrqv/97C0RlbIGn zgA7kwJv2XhjiJrHsc4Qu/fHFrYToZmCr2km0ugxGg== X-Received: by 2002:a02:b78a:: with SMTP id f10mr18813823jam.114.1579016042886; Tue, 14 Jan 2020 07:34:02 -0800 (PST) MIME-Version: 1.0 References: <20200110073730.213789-1-hsinyi@chromium.org> <20200110073730.213789-3-hsinyi@chromium.org> <7d137ab6-d57b-8471-bb6a-37556e5e2a01@gmail.com> In-Reply-To: From: Hsin-Yi Wang Date: Tue, 14 Jan 2020 23:33:36 +0800 Message-ID: Subject: Re: [PATCH v2 2/2] arm64: dts: mediatek: add mt8173 elm and hana board To: Matthias Brugger Cc: "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" , Rob Herring , Mark Rutland , Devicetree List , lkml , linux-mediatek@lists.infradead.org, Nicolas Boichat , Enric Balletbo i Serra , Daniel Kurtz Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Jan 14, 2020 at 11:10 PM Matthias Brugger wrote: > > > > On 13/01/2020 19:01, Hsin-Yi Wang wrote: > > On Fri, Jan 10, 2020 at 9:42 PM Matthias Brugger wrote: > >> > >> > > Thanks, I will address the comments and send next version > >> > >> On 10/01/2020 08:37, Hsin-Yi Wang wrote: > >>> Elm is Acer Chromebook R13. Hana is Lenovo Chromebook. Both uses mt8173 > >>> SoC. > >>> > >>> Signed-off-by: Hsin-Yi Wang > >>> --- > >>> Changes in v2: > >>> - remove downstream nodes and unused nodes > >>> - use GPIO_ACTIVE_LOW for ps8640 gpios > >>> - move trackpad to hana > >>> --- > >>> arch/arm64/boot/dts/mediatek/Makefile | 3 + > >>> .../dts/mediatek/mt8173-elm-hana-rev7.dts | 27 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dts | 16 + > >>> .../boot/dts/mediatek/mt8173-elm-hana.dtsi | 60 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 15 + > >>> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1040 +++++++++++++++++ > >>> 6 files changed, 1161 insertions(+) > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > >>> index 458bbc422a94..b45a45a565a1 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/Makefile > >>> +++ b/arch/arm64/boot/dts/mediatek/Makefile > >>> @@ -6,5 +6,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb > >>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb > >>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> new file mode 100644 > >>> index 000000000000..a3616bc3d859 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts > >>> @@ -0,0 +1,27 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2019 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev7 board"; > >>> + compatible = "google,hana-rev7", "mediatek,mt8173"; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + trips { > >>> + cpu_crit: cpu_crit@0 { > >>> + temperature = <100000>; > >>> + type = "critical"; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&gpio_keys { > >>> + /delete-node/tablet_mode; > >>> + /delete-node/volume_down; > >>> + /delete-node/volume_up; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> new file mode 100644 > >>> index 000000000000..8cbcc75192e3 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts > >>> @@ -0,0 +1,16 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm-hana.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Hana rev0 board"; > > If we can't make this more verbose, at least delete rev0, that's confusing. > Should the name not be "Google Hana"? > Sure, Google Hana makes sense. > >>> + compatible = "google,hana-rev6", > >>> + "google,hana-rev5", "google,hana-rev4", > >>> + "google,hana-rev3", "google,hana-rev2", > >>> + "google,hana-rev1", "google,hana-rev0", > >>> + "google,hana", "mediatek,mt8173"; > >>> +}; > >> > >> I'm a bit confused about all this versions. Do you want to keep them for > >> internal use, as I suppose only rev6 is available to the general public, > >> correct? I'm fine with keeping the old revisions if that's of use for you, > >> otherwise I'd prefer to delete them. > > According to internal feedback system, at least rev3, rev6, rev7 are > > in general public. I can delete rev0~rev2, since they are earlier > > version device. > > If you don't plan to use the rev0 to rev2 in-house, then we can delete them. > > >> > >> Model name could be more verbose. > >> > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> new file mode 100644 > >>> index 000000000000..35e12b290947 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi > >>> @@ -0,0 +1,60 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +&i2c0 { > >>> + clock-frequency = <200000>; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + touchscreen2: touchscreen@34 { > >>> + compatible = "melfas,mip4_ts"; > >>> + reg = <0x34>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> + > >>> + touchscreen3: touchscreen@20 { > >>> + compatible = "hid-over-i2c"; > >>> + reg = <0x20>; > >>> + hid-descr-addr = <0x0020>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >> > >> In v1 you mentioned: > >> "Partners wants to increase touchpad and touchscreen source (they choose > >> synaptics) for hana 300e, and synaptics uses hid-over-i2c driver." > >> > >> So the partner uses the same compatible (google,hana-rev6?) for both devices? > >> > > Confirmed with others, second source devices share same compatible. > > We should create independent dts for the different boards. Like it is done for > gru-scarlett. Doesn't the FW provide the sku number in the compatible string? > Since I don't have a second source device to verify, I checked with SIE, and he said the sku number(board id) are same for device using original trackpad and second source trackpad in hana's case. So I don't think we can split them to independent dts. > >>> +}; > >>> + > >>> +&i2c4 { > >>> + trackpad2: trackpad@2c { > >>> + compatible = "hid-over-i2c"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x2c>; > >>> + hid-descr-addr = <0x0020>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>; > >>> +}; > >>> + > >>> +&pio { > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins2 { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + output-high; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_wp { > >>> + pinmux = ; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> new file mode 100644 > >>> index 000000000000..e5da2355760e > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts > >>> @@ -0,0 +1,15 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "mt8173-elm.dtsi" > >>> + > >>> +/ { > >>> + model = "Mediatek Elm board"; > >>> + compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", > >>> + "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", > >>> + "google,elm-rev2", "google,elm-rev1", > >>> + "google,elm", "mediatek,mt8173"; > >>> +}; > >>> \ No newline at end of file > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> new file mode 100644 > >>> index 000000000000..2ac738bebe04 > >>> --- /dev/null > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > >>> @@ -0,0 +1,1040 @@ > >>> +// SPDX-License-Identifier: GPL-2.0-only > >>> +/* > >>> + * Copyright 2016 MediaTek Inc. > >>> + */ > >>> + > >>> +#include > >>> +#include > >>> +#include "mt8173.dtsi" > >>> + > >>> +/ { > >>> + aliases { > >>> + serial0 = &uart0; > >>> + serial1 = &uart1; > >>> + serial2 = &uart2; > >>> + serial3 = &uart3; > >>> + }; > >>> + > >>> + memory@40000000 { > >>> + device_type = "memory"; > >>> + reg = <0 0x40000000 0 0x80000000>; > >>> + }; > >>> + > >>> + backlight_lcd: backlight_lcd { > >>> + compatible = "pwm-backlight"; > >>> + pwms = <&pwm0 0 1000000>; > >>> + brightness-levels = < > >>> + 0 16 32 48 64 80 96 112 > >>> + 128 144 160 176 192 208 224 240 > >>> + 255 > >>> + >; > >>> + default-brightness-level = <9>; > >>> + power-supply = <&bl_fixed_reg>; > >>> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; > >>> + > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&disp_pwm0_pins>; > >>> + status = "okay"; > >>> + }; > >>> + > >>> + bl_fixed_reg: fixedregulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "bl_fixed"; > >>> + regulator-min-microvolt = <1800000>; > >>> + regulator-max-microvolt = <1800000>; > >>> + startup-delay-us = <1000>; > >>> + enable-active-high; > >>> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&bl_fixed_pins>; > >>> + }; > >>> + > >>> + chosen { > >>> + stdout-path = &uart0; > >>> + }; > >>> + > >>> + gpio_keys: gpio-keys { > >>> + compatible = "gpio-keys"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&gpio_keys_pins>; > >>> + > >>> + lid { > >>> + label = "Lid"; > >>> + gpios = <&pio 69 GPIO_ACTIVE_LOW>; > >>> + linux,code = <0>; /* SW_LID */ > >>> + linux,input-type = <5>; /* EV_SW */ > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + power { > >>> + label = "Power"; > >>> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>; > >>> + linux,code = ; > >>> + debounce-interval = <30>; > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + tablet_mode { > >>> + label = "Tablet_mode"; > >>> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>; > >>> + linux,code = <1>; /* SW_TABLET_MODE */ > >> > >> can't we use SW_TABLET_MODE fomr linux-event-codes.h? > >> > > Will fix this. > >>> + linux,input-type = <5>; /* EV_SW */ > >> > >> same here. > >> > >>> + gpio-key,wakeup; > >>> + }; > >>> + > >>> + volume_down { > >>> + label = "Volume_down"; > >>> + gpios = <&pio 123 GPIO_ACTIVE_LOW>; > >>> + linux,code = ; > >>> + }; > >>> + > >>> + volume_up { > >>> + label = "Volume_up"; > >>> + gpios = <&pio 124 GPIO_ACTIVE_LOW>; > >>> + linux,code = ; > >>> + }; > >>> + }; > >>> + > >>> + panel: panel { > >>> + compatible = "lg,lp120up1"; > >>> + power-supply = <&panel_fixed_3v3>; > >>> + ddc-i2c-bus = <&i2c0>; > >>> + backlight = <&backlight_lcd>; > >>> + > >>> + port { > >>> + panel_in: endpoint { > >>> + remote-endpoint = <&ps8640_out>; > >>> + }; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_3v3: regulator@1 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PANEL_3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + enable-active-high; > >>> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&panel_fixed_pins>; > >>> + }; > >>> + > >>> + ps8640_fixed_1v2: regulator@2 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "PS8640_1V2"; > >>> + regulator-min-microvolt = <1200000>; > >>> + regulator-max-microvolt = <1200000>; > >>> + regulator-enable-ramp-delay = <2000>; > >>> + enable-active-high; > >>> + regulator-boot-on; > >>> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_fixed_pins>; > >>> + }; > >>> + > >>> + sdio_fixed_3v3: fixedregulator@0 { > >>> + compatible = "regulator-fixed"; > >>> + regulator-name = "3V3"; > >>> + regulator-min-microvolt = <3300000>; > >>> + regulator-max-microvolt = <3300000>; > >>> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>; > >> > >> we don't need to set the pincontroller mux here? > >> > > Will double check on schematic and add it. > >>> + }; > >>> + > >>> + sound: sound { > >>> + compatible = "mediatek,mt8173-rt5650"; > >>> + mediatek,audio-codec = <&rt5650 &hdmi0>; > >>> + mediatek,platform = <&afe>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&aud_i2s2>; > >>> + > >>> + mediatek,mclk = <1>; > >>> + codec-capture { > >>> + sound-dai = <&rt5650 1>; > >>> + }; > >>> + }; > >>> + > >>> + hdmicon: connector { > >>> + compatible = "hdmi-connector"; > >>> + label = "hdmi"; > >>> + type = "a"; > >>> + ddc-i2c-bus = <&hdmiddc0>; > >>> + > >>> + port { > >>> + hdmi_connector_in: endpoint { > >>> + remote-endpoint = <&hdmi0_out>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&cec { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&cpu0 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu1 { > >>> + proc-supply = <&mt6397_vpca15_reg>; > >>> +}; > >>> + > >>> +&cpu2 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu3 { > >>> + proc-supply = <&da9211_vcpu_reg>; > >>> + sram-supply = <&mt6397_vsramca7_reg>; > >>> +}; > >>> + > >>> +&cpu_thermal { > >>> + sustainable-power = <4500>; /* milliwatts */ > >>> + trips { > >>> + threshold: trip-point@0 { > >>> + temperature = <60000>; > >>> + }; > >>> + > >>> + target: trip-point@1 { > >>> + temperature = <65000>; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dsi0 { > >>> + status = "okay"; > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@1 { > >>> + dsi0_out: endpoint { > >>> + remote-endpoint = <&ps8640_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&dpi0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&hdmi0 { > >>> + status = "okay"; > >>> + ports { > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + hdmi0_out: endpoint { > >>> + remote-endpoint = <&hdmi_connector_in>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&hdmi_phy { > >>> + status = "okay"; > >>> + mediatek,ibias = <0xc>; > >>> +}; > >>> + > >>> +&i2c0 { > >>> + status = "okay"; > >>> + > >>> + rt5650: audio-codec@1a { > >>> + compatible = "realtek,rt5650"; > >>> + reg = <0x1a>; > >>> + avdd-supply = <&mt6397_vgp1_reg>; > >>> + cpvdd-supply = <&mt6397_vcama_reg>; > >> > >> Hm, only defined for "realtek,rt5663", I suppose that's an inconsistency in the > >> binding documentation. Can you please double check? > >> > > This one? https://github.com/torvalds/linux/blob/master/sound/soc/codecs/rt5645.c#L3582 > > > > Yes, I checked myself and send a patch to fix the binding description, which was > missing the two suppliers. > > > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&rt5650_irq>; > >>> + #sound-dai-cells = <1>; > >>> + realtek,dmic1-data-pin = <2>; > >>> + realtek,jd-mode = <2>; > >>> + }; > >>> + > >>> + ps8640: edp-bridge@8 { > >>> + compatible = "parade,ps8640"; > >>> + reg = <0x8>; > >>> + powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>; > >>> + reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&ps8640_pins>; > >>> + vdd12-supply = <&ps8640_fixed_1v2>; > >>> + vdd33-supply = <&mt6397_vgp2_reg>; > >>> + > >>> + ports { > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + port@0 { > >>> + reg = <0>; > >>> + > >>> + ps8640_in: endpoint { > >>> + remote-endpoint = <&dsi0_out>; > >>> + }; > >>> + }; > >>> + > >>> + port@1 { > >>> + reg = <1>; > >>> + > >>> + ps8640_out: endpoint { > >>> + remote-endpoint = <&panel_in>; > >>> + }; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c1 { > >>> + clock-frequency = <1500000>; > >>> + status = "okay"; > >>> + > >>> + da9211: da9211@68 { > >>> + compatible = "dlg,da9211"; > >>> + reg = <0x68>; > >>> + > >> > >> no interrupts? binding description have this stated as required. what happens > >> when the device raises an interrupt? > > Will double check on schematic and add it. > >> > >>> + regulators { > >>> + da9211_vcpu_reg: BUCKA { > >>> + regulator-name = "VBUCKA"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <4400000>; > >>> + regulator-ramp-delay = <10000>; > >>> + regulator-always-on; > >>> + regulator-allowed-modes = <0 1>; > >>> + }; > >>> + > >>> + da9211_vgpu_reg: BUCKB { > >>> + regulator-name = "VBUCKB"; > >>> + regulator-min-microvolt = < 700000>; > >>> + regulator-max-microvolt = <1310000>; > >>> + regulator-min-microamp = <2000000>; > >>> + regulator-max-microamp = <3000000>; > >>> + regulator-ramp-delay = <10000>; > >>> + }; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&i2c2 { > >>> + status = "okay"; > >>> + > >>> + tpm: tpm@20 { > >>> + compatible = "infineon,slb9645tt"; > >>> + reg = <0x20>; > >>> + powered-while-suspended; > >>> + }; > >>> +}; > >>> + > >>> +&i2c3 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + > >>> + touchscreen: touchscreen@10 { > >>> + compatible = "elan,ekth3500"; > >>> + reg = <0x10>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <88 IRQ_TYPE_LEVEL_LOW>; > >>> + }; > >>> +}; > >>> + > >>> +&i2c4 { > >>> + clock-frequency = <400000>; > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&trackpad_irq>; > >> > >> Why not move the pinctrl properties into the trackpad node? > >> > > As second source trackpad device and original device shares same > > compatible string (rev id), we need to add 2nd trackpad node here. > > According to previous log (since I don't have a second source trackpad > > device to test), adding pinctrl in each trackpad node, there would be > > error: > > [ 0.643501] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin URXD3 > > already requested by 7-0015; cannot claim for 7-002c > > [ 0.643525] mediatek-mt8173-pinctrl 1000b000.pinctrl: pin-117 > > (7-002c) status -22 > > [ 0.643548] mediatek-mt8173-pinctrl 1000b000.pinctrl: could not > > request pin 117 (URXD3) from group URXD3 on device 1000b000.pinctrl > > [ 0.643568] i2c_hid 7-002c: Error applying setting, reverse things back > > [ 0.643867] i2c 7-002c: Driver i2c_hid requests probe deferral > > > > > > I think we can fix this, if we create the aforementioned two board DTS files. > Correct? > > >>> + > >>> + trackpad: trackpad@15 { > >>> + compatible = "elan,ekth3000"; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <117 IRQ_TYPE_LEVEL_LOW>; > >>> + reg = <0x15>; > >>> + vcc-supply = <&mt6397_vgp6_reg>; > >>> + wakeup-source; > >>> + }; > >>> +}; > >>> + > >>> +&mipi_tx0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&mmc0 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc0_pins_default>; > >>> + pinctrl-1 = <&mmc0_pins_uhs>; > >>> + bus-width = <8>; > >>> + max-frequency = <200000000>; > >>> + cap-mmc-highspeed; > >>> + mmc-hs200-1_8v; > >>> + mmc-hs400-1_8v; > >>> + cap-mmc-hw-reset; > >>> + hs400-ds-delay = <0x14015>; > >>> + mediatek,hs200-cmd-int-delay=<30>; > >>> + mediatek,hs400-cmd-int-delay=<14>; > >>> + mediatek,hs400-cmd-resp-sel-rising; > >>> + vmmc-supply = <&mt6397_vemc_3v3_reg>; > >>> + vqmmc-supply = <&mt6397_vio18_reg>; > >>> + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; > >>> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; > >>> + non-removable; > >>> +}; > >>> + > >>> +&mmc1 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc1_pins_default>; > >>> + pinctrl-1 = <&mmc1_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + cd-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; > >>> + vmmc-supply = <&mt6397_vmch_reg>; > >>> + vqmmc-supply = <&mt6397_vmc_reg>; > >>> +}; > >>> + > >>> +&mmc3 { > >>> + status = "okay"; > >>> + pinctrl-names = "default", "state_uhs"; > >>> + pinctrl-0 = <&mmc3_pins_default>; > >>> + pinctrl-1 = <&mmc3_pins_uhs>; > >>> + bus-width = <4>; > >>> + max-frequency = <200000000>; > >>> + cap-sd-highspeed; > >>> + sd-uhs-sdr50; > >>> + sd-uhs-sdr104; > >>> + sdr104-clk-delay = <5>; > >> > >> Not an upstream property, please delete it. > >> > >>> + keep-power-in-suspend; > >>> + enable-sdio-wakeup; > >>> + cap-sdio-irq; > >>> + vmmc-supply = <&sdio_fixed_3v3>; > >>> + vqmmc-supply = <&mt6397_vgp3_reg>; > >>> + non-removable; > >>> + cap-power-off-card; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + btmrvl: btmrvl@2 { > >>> + compatible = "marvell,sd8897-bt"; > >>> + reg = <2>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = /bits/ 16 <0x0d>; > >>> + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; > >>> + }; > >>> + > >>> + mwifiex: mwifiex@1 { > >>> + compatible = "marvell,sd8897"; > >>> + reg = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <38 IRQ_TYPE_LEVEL_LOW>; > >>> + marvell,wakeup-pin = <3>; > >>> + marvell,caldata_ed_mac = /bits/ 8 < > >>> +0x01 0x00 0x07 0x00 0x14 0x00 0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> +0x01 0x00 0x00 0x00 0x12 0x00 0x02 0x00 0x01 0x00 > >>> + >; > >> > >> Not an upstream property, please delete. > >> > >>> + }; > >>> +}; > >>> + > >>> +&nor_flash { > >>> + status = "okay"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&nor_gpio1_pins>; > >>> + bus-width = <8>; > >>> + max-frequency = <50000000>; > >>> + non-removable; > >>> + flash@0 { > >>> + compatible = "jedec,spi-nor"; > >>> + reg = <0>; > >>> + }; > >>> +}; > >>> + > >>> +&pio { > >>> + aud_i2s2: aud_i2s2 { > >>> + pins1 { > >>> + pinmux = , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + ; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + bl_fixed_pins: bl_fixed_pins { > >>> + pins1 { > >>> + pinmux = ; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + bt_wake_pins: bt_wake_pins { > >>> + pins1 { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + disp_pwm0_pins: disp_pwm0_pins { > >>> + pins1 { > >>> + pinmux = ; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + gpio_keys_pins: gpio_keys_pins { > >>> + volume_pins { > >>> + pinmux = , > >>> + ; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + tablet_mode_pins { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + hdmi_mux_pins: hdmi_mux_pins { > >>> + pins1 { > >>> + pinmux = ; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_default: mmc0default { > >>> + pins_cmd_dat { > >>> + pinmux = , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + ; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = ; > >>> + bias-pull-down; > >> > >> identation. > >> > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_default: mmc1default { > >>> + pins_cmd_dat { > >>> + pinmux = , > >>> + , > >>> + , > >>> + , > >>> + ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up = ; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = ; > >>> + bias-pull-down; > >>> + drive-strength = ; > >>> + }; > >>> + > >>> + pins_insert { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_default: mmc3default { > >>> + pins_dat { > >>> + pinmux = , > >>> + , > >>> + , > >>> + ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up = ; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up = ; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = ; > >>> + bias-pull-down; > >>> + drive-strength = ; > >>> + }; > >>> + > >>> + pins_pdn { > >>> + pinmux = ; > >>> + output-low; > >>> + }; > >>> + }; > >>> + > >>> + mmc0_pins_uhs: mmc0 { > >>> + pins_cmd_dat { > >>> + pinmux = , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + , > >>> + ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up = ; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = ; > >>> + drive-strength = ; > >>> + bias-pull-down = ; > >>> + }; > >>> + > >>> + pins_ds { > >>> + pinmux = ; > >>> + drive-strength = ; > >>> + bias-pull-down = ; > >>> + }; > >>> + > >>> + pins_rst { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + mmc1_pins_uhs: mmc1 { > >>> + pins_cmd_dat { > >>> + pinmux = , > >>> + , > >>> + , > >>> + , > >>> + ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up = ; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = ; > >>> + drive-strength = ; > >>> + bias-pull-down = ; > >>> + }; > >>> + }; > >>> + > >>> + mmc3_pins_uhs: mmc3 { > >>> + pins_dat { > >>> + pinmux = , > >>> + , > >>> + , > >>> + ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up = ; > >>> + }; > >>> + > >>> + pins_cmd { > >>> + pinmux = ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up = ; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = ; > >>> + drive-strength = ; > >>> + bias-pull-down = ; > >>> + }; > >>> + }; > >>> + > >>> + nor_gpio1_pins: nor { > >>> + pins1 { > >>> + pinmux = , > >>> + , > >>> + ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins2 { > >>> + pinmux = ; > >>> + drive-strength = ; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_clk { > >>> + pinmux = ; > >>> + input-enable; > >>> + drive-strength = ; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + panel_fixed_pins: panel_fixed_pins { > >>> + pins1 { > >>> + pinmux = ; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_pins: ps8640_pins { > >>> + pins1 { > >>> + pinmux = , > >>> + , > >>> + ; > >>> + }; > >>> + }; > >>> + > >>> + ps8640_fixed_pins: ps8640_fixed_pins { > >>> + pins1 { > >>> + pinmux = ; > >>> + }; > >>> + }; > >>> + > >>> + rt5650_irq: rt5650_irq { > >>> + pins1 { > >>> + pinmux = ; > >>> + bias-pull-down; > >>> + }; > >>> + }; > >>> + > >>> + spi_pins_a: spi1 { > >>> + pins1 { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + }; > >>> + > >>> + pins_spi { > >>> + pinmux = , > >>> + , > >>> + , > >>> + ; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + trackpad_irq: trackpad_irq { > >>> + pins1 { > >>> + pinmux = ; > >>> + input-enable; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> + > >>> + usb_pins: usb@0 { > >>> + pins1 { > >>> + pinmux = ; > >>> + output-high; > >>> + bias-disable; > >>> + }; > >>> + }; > >>> + > >>> + wifi_wake_pins: wifi_wake_pins { > >>> + pins1 { > >>> + pinmux = ; > >>> + bias-pull-up; > >>> + }; > >>> + }; > >>> +}; > >>> + > >>> +&pwm0 { > >>> + status = "okay"; > >>> +}; > >>> + > >>> +&pwrap { > >>> + pmic: mt6397 { > >>> + compatible = "mediatek,mt6397"; > >>> + #address-cells = <1>; > >>> + #size-cells = <1>; > >>> + interrupt-parent = <&pio>; > >>> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; > >>> + interrupt-controller; > >>> + #interrupt-cells = <2>; > >>> + > >>> + mt6397rtc: mt6397rtc { > >> > >> AFAIK this should be > >> rtc: mt6397rtc { > >> > >> Please fix that for all subnodes. > >> > > Will fix in next version > >>> + compatible = "mediatek,mt6397-rtc"; > >>> + }; > >>> + > >>> + syscfg_pctl_pmic: syscfg_pctl_pmic@c000 { > >>> + compatible = "mediatek,mt6397-pctl-pmic-syscfg", > >>> + "syscon"; > >>> + reg = <0 0x0000c000 0 0x0108>; > >> > >> not an upstream compatible, please delete the node. > >> > > I think my comment was not correct. I'll have to dig more to understand why we > have a compatible without a binding description. > > Regards, > Matthias