Received: by 2002:a25:8b91:0:0:0:0:0 with SMTP id j17csp7462563ybl; Wed, 15 Jan 2020 23:32:42 -0800 (PST) X-Google-Smtp-Source: APXvYqyXUYGtn8Fuo7mT4gs60aZVG/i7WgmWYUvKAApWaeX7cX0fPU669JIHzMZup2fYpzejS1yu X-Received: by 2002:aca:1012:: with SMTP id 18mr3002197oiq.151.1579159957571; Wed, 15 Jan 2020 23:32:37 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1579159957; cv=none; d=google.com; s=arc-20160816; b=MdsoMBNeOf7Eqvjas7xxo6+ug4GhEJ7+0FTNAH0tqN63Ny2C/q5RCKjuxBqUNbJIEz 3q9BS69uIqe4yr3CtCoL9hYVQnVPdJtkEjBcC71ArATHs3r2uhZEjhJ1EzU0khRCzds2 RUlWLIP+XgaD0DiVlOjEE4mFK/RyIJIznZeVtTjDJOw4JJyi/Ek3NAvhQ5YfrkHpAqLY noedcN7uhrtLL4acglwAb0McNMuXeehqaOFAyA9vUuaiAGHX6Y0Fo5+uddd3XSiQRxiW ZJZ0jw4WuvVeG5fJYv/6vS+xNqjwVx3exf7PsFu5YTbaAhWLbCK9FJeKsSAjGZZ3Ax9q 63Zg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from; bh=bXxzUurcNlSa02JQlc/VTkmpnIdbCeraAE3na/KICIk=; b=aDaELVBZ8e1m04OYqxkJ8FxTtHjV+UkSoOl3SSOu33hvrR4OT6aSvoLtqSEVU2ckpp TROmMMUmT2fxZGeX8tu8oGz4Fv7dXOmEPY6jjyGfApUbu+sT8gkh6GsvXQq6lqM8X5l/ 2pDbDW1BLb2i8cOir1wo/z5q3sxQDMU1wa3Hu3l3YPrD9OaQkGRk/SBbtKNvxI1yyHbd bMw7DduOFiRmKFmBmkurvM08Dc+QK3YeCxXziLzYdRj7SKKi8wXBusQCM99LLdAr0JT4 2TOolQTbyZ3Wohh3KUGEpakJ4ITIj2NU8t7PWmDqR7yF3BZDPXQzv7/+SCmvN3IU+r6S nciA== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id m85si11201724oig.158.2020.01.15.23.32.24; Wed, 15 Jan 2020 23:32:37 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730193AbgAPHQS (ORCPT + 99 others); Thu, 16 Jan 2020 02:16:18 -0500 Received: from lucky1.263xmail.com ([211.157.147.132]:49442 "EHLO lucky1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730122AbgAPHQS (ORCPT ); Thu, 16 Jan 2020 02:16:18 -0500 Received: from localhost (unknown [192.168.167.70]) by lucky1.263xmail.com (Postfix) with ESMTP id 729F08BD08; Thu, 16 Jan 2020 15:14:30 +0800 (CST) X-MAIL-GRAY: 0 X-MAIL-DELIVERY: 1 X-ADDR-CHECKED4: 1 X-ANTISPAM-LEVEL: 2 X-ABS-CHECKED: 0 Received: from localhost.localdomain (unknown [58.22.7.114]) by smtp.263.net (postfix) whith ESMTP id P20736T140093614442240S1579158868089890_; Thu, 16 Jan 2020 15:14:29 +0800 (CST) X-IP-DOMAINF: 1 X-UNIQUE-TAG: <3d1708647d364b363664a47ef99b77a9> X-RL-SENDER: jay.xu@rock-chips.com X-SENDER: xjq@rock-chips.com X-LOGIN-NAME: jay.xu@rock-chips.com X-FST-TO: linus.walleij@linaro.org X-SENDER-IP: 58.22.7.114 X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 From: Jianqun Xu To: linus.walleij@linaro.org, heiko@sntech.de, david.wu@rock-chips.com, kever.yang@rock-chips.com Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-rockchip@lists.infradead.org, jay.xu@rock-chips.com Subject: [PATCH v3] pinctrl: rockchip: split rockchip pinctrl driver by SoC type Date: Thu, 16 Jan 2020 15:14:26 +0800 Message-Id: <20200116071426.13430-1-jay.xu@rock-chips.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The pinctrl-rockchip driver grows larger by adding support for each new SoC, that make the kernel Image size too large since it only under one config named PINCTRL_ROCKCHIP. This patch split driver in the form of core driver + soc driver, - pinctrl-rockchip.c defined an platform probe register function - pinctrl-rkxxxx.c init module by matching compatible name For rockchip_defconfig, it needs to select all PINCTRL_RKxxxx to keep same with old driver. For some special defconfig, it can only select one PINCTRL_RKxxxx. Reviewed-by: Kever Yang Signed-off-by: Jianqun Xu --- changes since v2: - remove rockchip_pinctrl_remove - rename rockchip_pinctrl_* to rockchip_pctrl_* - redule arguments for get_soc_data - add module author for each new driver files - add copyright for new driver files changes since v1: - add rockchip_pinctrl_remove - remove unused head files in pinctrl-rockchip.h drivers/pinctrl/Kconfig | 8 +- drivers/pinctrl/Makefile | 2 +- drivers/pinctrl/rockchip/Kconfig | 126 ++ drivers/pinctrl/rockchip/Makefile | 16 + drivers/pinctrl/rockchip/pinctrl-px30.c | 224 ++ drivers/pinctrl/rockchip/pinctrl-rk2928.c | 70 + drivers/pinctrl/rockchip/pinctrl-rk3036.c | 69 + drivers/pinctrl/rockchip/pinctrl-rk3066a.c | 72 + drivers/pinctrl/rockchip/pinctrl-rk3066b.c | 51 + drivers/pinctrl/rockchip/pinctrl-rk3128.c | 161 ++ drivers/pinctrl/rockchip/pinctrl-rk3188.c | 147 ++ drivers/pinctrl/rockchip/pinctrl-rk3228.c | 225 ++ drivers/pinctrl/rockchip/pinctrl-rk3288.c | 210 ++ drivers/pinctrl/rockchip/pinctrl-rk3308.c | 420 ++++ drivers/pinctrl/rockchip/pinctrl-rk3328.c | 272 +++ drivers/pinctrl/rockchip/pinctrl-rk3368.c | 125 ++ drivers/pinctrl/rockchip/pinctrl-rk3399.c | 195 ++ drivers/pinctrl/rockchip/pinctrl-rockchip.c | 2043 +++++++++++++++++++ drivers/pinctrl/rockchip/pinctrl-rockchip.h | 387 ++++ drivers/pinctrl/rockchip/pinctrl-rv1108.c | 214 ++ 20 files changed, 5029 insertions(+), 8 deletions(-) create mode 100644 drivers/pinctrl/rockchip/Kconfig create mode 100644 drivers/pinctrl/rockchip/Makefile create mode 100644 drivers/pinctrl/rockchip/pinctrl-px30.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk2928.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3036.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3066a.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3066b.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3128.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3188.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3228.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3288.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3308.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3328.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3368.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3399.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rockchip.c create mode 100644 drivers/pinctrl/rockchip/pinctrl-rockchip.h create mode 100644 drivers/pinctrl/rockchip/pinctrl-rv1108.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 3bfbf2ff6e2b..17ce48220795 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -186,13 +186,6 @@ config PINCTRL_OXNAS select GPIOLIB_IRQCHIP select MFD_SYSCON -config PINCTRL_ROCKCHIP - bool - select PINMUX - select GENERIC_PINCONF - select GENERIC_IRQ_CHIP - select MFD_SYSCON - config PINCTRL_RZA1 bool "Renesas RZ/A1 gpio and pinctrl driver" depends on OF @@ -395,6 +388,7 @@ source "drivers/pinctrl/nomadik/Kconfig" source "drivers/pinctrl/nuvoton/Kconfig" source "drivers/pinctrl/pxa/Kconfig" source "drivers/pinctrl/qcom/Kconfig" +source "drivers/pinctrl/rockchip/Kconfig" source "drivers/pinctrl/samsung/Kconfig" source "drivers/pinctrl/sh-pfc/Kconfig" source "drivers/pinctrl/spear/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 879f312bfb75..262d1a515c10 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o -obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o @@ -59,6 +58,7 @@ obj-y += nomadik/ obj-$(CONFIG_ARCH_NPCM7XX) += nuvoton/ obj-$(CONFIG_PINCTRL_PXA) += pxa/ obj-$(CONFIG_ARCH_QCOM) += qcom/ +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_PINCTRL_SAMSUNG) += samsung/ obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc/ obj-$(CONFIG_PINCTRL_SPEAR) += spear/ diff --git a/drivers/pinctrl/rockchip/Kconfig b/drivers/pinctrl/rockchip/Kconfig new file mode 100644 index 000000000000..4873a05108f8 --- /dev/null +++ b/drivers/pinctrl/rockchip/Kconfig @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0 + +if (ARCH_ROCKCHIP || COMPILE_TEST) + +config PINCTRL_ROCKCHIP + bool + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + select GENERIC_IRQ_CHIP + select MFD_SYSCON + +config PINCTRL_PX30 + tristate "PX30 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK2928 + tristate "RK2928 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3036 + tristate "RK3036 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3066A + tristate "RK3066A pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3066B + tristate "RK3066B pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3128 + tristate "RK3128 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3188 + tristate "RK3188 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3228 + tristate "RK3228 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3288 + tristate "RK3288 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3308 + tristate "RK3308 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3328 + tristate "RK3328 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3368 + tristate "RK3368 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RK3399 + tristate "RK3399 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +config PINCTRL_RV1108 + tristate "RV1108 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_ROCKCHIP + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + SoCs on Rockchip platform. + +endif diff --git a/drivers/pinctrl/rockchip/Makefile b/drivers/pinctrl/rockchip/Makefile new file mode 100644 index 000000000000..a250b60631f5 --- /dev/null +++ b/drivers/pinctrl/rockchip/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PINCTRL_PX30) += pinctrl-px30.o +obj-$(CONFIG_PINCTRL_RK2928) += pinctrl-rk2928.o +obj-$(CONFIG_PINCTRL_RK3036) += pinctrl-rk3036.o +obj-$(CONFIG_PINCTRL_RK3066A) += pinctrl-rk3066a.o +obj-$(CONFIG_PINCTRL_RK3066B) += pinctrl-rk3066b.o +obj-$(CONFIG_PINCTRL_RK3128) += pinctrl-rk3128.o +obj-$(CONFIG_PINCTRL_RK3188) += pinctrl-rk3188.o +obj-$(CONFIG_PINCTRL_RK3228) += pinctrl-rk3228.o +obj-$(CONFIG_PINCTRL_RK3288) += pinctrl-rk3288.o +obj-$(CONFIG_PINCTRL_RK3308) += pinctrl-rk3308.o +obj-$(CONFIG_PINCTRL_RK3328) += pinctrl-rk3328.o +obj-$(CONFIG_PINCTRL_RK3368) += pinctrl-rk3368.o +obj-$(CONFIG_PINCTRL_RK3399) += pinctrl-rk3399.o +obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o +obj-$(CONFIG_PINCTRL_RV1108) += pinctrl-rv1108.o diff --git a/drivers/pinctrl/rockchip/pinctrl-px30.c b/drivers/pinctrl/rockchip/pinctrl-px30.c new file mode 100644 index 000000000000..b589c2166a3f --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-px30.c @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define PX30_PULL_PMU_OFFSET 0x10 +#define PX30_PULL_GRF_OFFSET 0x60 +#define PX30_PULL_BITS_PER_PIN 2 +#define PX30_PULL_PINS_PER_REG 8 +#define PX30_PULL_BANK_STRIDE 16 + +#define PX30_DRV_PMU_OFFSET 0x20 +#define PX30_DRV_GRF_OFFSET 0xf0 +#define PX30_DRV_BITS_PER_PIN 2 +#define PX30_DRV_PINS_PER_REG 8 +#define PX30_DRV_BANK_STRIDE 16 + +#define PX30_SCHMITT_PMU_OFFSET 0x38 +#define PX30_SCHMITT_GRF_OFFSET 0xc0 +#define PX30_SCHMITT_PINS_PER_PMU_REG 16 +#define PX30_SCHMITT_BANK_STRIDE 16 +#define PX30_SCHMITT_PINS_PER_GRF_REG 8 + +static struct rockchip_mux_route_data px30_mux_route_data[] = { + { + /* cif-d2m0 */ + .bank_num = 2, + .pin = 0, + .func = 1, + .route_offset = 0x184, + .route_val = BIT(16 + 7), + }, { + /* cif-d2m1 */ + .bank_num = 3, + .pin = 3, + .func = 3, + .route_offset = 0x184, + .route_val = BIT(16 + 7) | BIT(7), + }, { + /* pdm-m0 */ + .bank_num = 3, + .pin = 22, + .func = 2, + .route_offset = 0x184, + .route_val = BIT(16 + 8), + }, { + /* pdm-m1 */ + .bank_num = 2, + .pin = 22, + .func = 1, + .route_offset = 0x184, + .route_val = BIT(16 + 8) | BIT(8), + }, { + /* uart2-rxm0 */ + .bank_num = 1, + .pin = 27, + .func = 2, + .route_offset = 0x184, + .route_val = BIT(16 + 10), + }, { + /* uart2-rxm1 */ + .bank_num = 2, + .pin = 14, + .func = 2, + .route_offset = 0x184, + .route_val = BIT(16 + 10) | BIT(10), + }, { + /* uart3-rxm0 */ + .bank_num = 0, + .pin = 17, + .func = 2, + .route_offset = 0x184, + .route_val = BIT(16 + 9), + }, { + /* uart3-rxm1 */ + .bank_num = 1, + .pin = 15, + .func = 2, + .route_offset = 0x184, + .route_val = BIT(16 + 9) | BIT(9), + }, +}; + +static void px30_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 32 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = PX30_PULL_PMU_OFFSET; + } else { + *regmap = info->regmap_base; + *reg = PX30_PULL_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * PX30_PULL_BANK_STRIDE; + } + + *reg += ((pin_num / PX30_PULL_PINS_PER_REG) * 4); + *bit = (pin_num % PX30_PULL_PINS_PER_REG); + *bit *= PX30_PULL_BITS_PER_PIN; +} + +static void px30_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 32 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = PX30_DRV_PMU_OFFSET; + } else { + *regmap = info->regmap_base; + *reg = PX30_DRV_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * PX30_DRV_BANK_STRIDE; + } + + *reg += ((pin_num / PX30_DRV_PINS_PER_REG) * 4); + *bit = (pin_num % PX30_DRV_PINS_PER_REG); + *bit *= PX30_DRV_BITS_PER_PIN; +} + +static int px30_calc_schmitt(struct rockchip_pin_bank *bank, + int pin_num, + struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + int pins_per_reg; + + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = PX30_SCHMITT_PMU_OFFSET; + pins_per_reg = PX30_SCHMITT_PINS_PER_PMU_REG; + } else { + *regmap = info->regmap_base; + *reg = PX30_SCHMITT_GRF_OFFSET; + pins_per_reg = PX30_SCHMITT_PINS_PER_GRF_REG; + *reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE; + } + + *reg += ((pin_num / pins_per_reg) * 4); + *bit = pin_num % pins_per_reg; + + return 0; +} + +static struct rockchip_pin_bank px30_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT), +}; + +static struct rockchip_pin_ctrl px30_pin_ctrl = { + .pin_banks = px30_pin_banks, + .nr_banks = ARRAY_SIZE(px30_pin_banks), + .label = "PX30-GPIO", + .type = PX30, + .grf_mux_offset = 0x0, + .pmu_mux_offset = 0x0, + .iomux_routes = px30_mux_route_data, + .niomux_routes = ARRAY_SIZE(px30_mux_route_data), + .pull_calc_reg = px30_calc_pull, + .drv_calc_reg = px30_calc_drv_reg, + .schmitt_calc_reg = px30_calc_schmitt, +}; + +static const struct of_device_id px30_pinctrl_dt_match[] = { + { .compatible = "rockchip,px30-pinctrl", + .data = &px30_pin_ctrl }, + {}, +}; + +static struct platform_driver px30_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "px30-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = px30_pinctrl_dt_match, + }, +}; + +static int __init px30_pinctrl_init(void) +{ + return platform_driver_register(&px30_pinctrl_driver); +} +postcore_initcall(px30_pinctrl_init); + +MODULE_DESCRIPTION("PX30 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk2928.c b/drivers/pinctrl/rockchip/pinctrl-rk2928.c new file mode 100644 index 000000000000..14bca5b427da --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk2928.c @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK2928_PULL_OFFSET 0x118 +#define RK2928_PULL_PINS_PER_REG 16 +#define RK2928_PULL_BANK_STRIDE 8 + +static void rk2928_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK2928_PULL_OFFSET; + *reg += bank->bank_num * RK2928_PULL_BANK_STRIDE; + *reg += (pin_num / RK2928_PULL_PINS_PER_REG) * 4; + + *bit = pin_num % RK2928_PULL_PINS_PER_REG; +}; + +static struct rockchip_pin_bank rk2928_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk2928_pin_ctrl = { + .pin_banks = rk2928_pin_banks, + .nr_banks = ARRAY_SIZE(rk2928_pin_banks), + .label = "RK2928-GPIO", + .type = RK2928, + .grf_mux_offset = 0xa8, + .pull_calc_reg = rk2928_calc_pull, +}; + +static const struct of_device_id rk2928_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk2928-pinctrl", + .data = &rk2928_pin_ctrl }, + {}, +}; + +static struct platform_driver rk2928_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk2928-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk2928_pinctrl_dt_match, + }, +}; + +static int __init rk2928_pinctrl_init(void) +{ + return platform_driver_register(&rk2928_pinctrl_driver); +} +postcore_initcall(rk2928_pinctrl_init); + +MODULE_DESCRIPTION("RK2928 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3036.c b/drivers/pinctrl/rockchip/pinctrl-rk3036.c new file mode 100644 index 000000000000..78363fc892de --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3036.c @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3036_PULL_OFFSET 0x118 +#define RK3036_PULL_PINS_PER_REG 16 +#define RK3036_PULL_BANK_STRIDE 8 + +static void rk3036_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3036_PULL_OFFSET; + *reg += bank->bank_num * RK3036_PULL_BANK_STRIDE; + *reg += (pin_num / RK3036_PULL_PINS_PER_REG) * 4; + + *bit = pin_num % RK3036_PULL_PINS_PER_REG; +}; + +static struct rockchip_pin_bank rk3036_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), +}; + +static struct rockchip_pin_ctrl rk3036_pin_ctrl = { + .pin_banks = rk3036_pin_banks, + .nr_banks = ARRAY_SIZE(rk3036_pin_banks), + .label = "RK3036-GPIO", + .type = RK2928, + .grf_mux_offset = 0xa8, + .pull_calc_reg = rk3036_calc_pull, +}; + +static const struct of_device_id rk3036_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3036-pinctrl", + .data = &rk3036_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3036_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3036-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3036_pinctrl_dt_match, + }, +}; + +static int __init rk3036_pinctrl_init(void) +{ + return platform_driver_register(&rk3036_pinctrl_driver); +} +postcore_initcall(rk3036_pinctrl_init); + +MODULE_DESCRIPTION("RK3036 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3066a.c b/drivers/pinctrl/rockchip/pinctrl-rk3066a.c new file mode 100644 index 000000000000..476e7b2d738e --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3066a.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3066A_PULL_GRF_OFFSET 0x118 +#define RK3066A_PULL_PINS_PER_REG 16 +#define RK3066A_PULL_BANK_STRIDE 8 + +static void rk3066a_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3066A_PULL_GRF_OFFSET; + *reg += bank->bank_num * RK3066A_PULL_BANK_STRIDE; + *reg += (pin_num / RK3066A_PULL_PINS_PER_REG) * 4; + + *bit = pin_num % RK3066A_PULL_PINS_PER_REG; +}; + +static struct rockchip_pin_bank rk3066a_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), + PIN_BANK(4, 32, "gpio4"), + PIN_BANK(6, 16, "gpio6"), +}; + +static struct rockchip_pin_ctrl rk3066a_pin_ctrl = { + .pin_banks = rk3066a_pin_banks, + .nr_banks = ARRAY_SIZE(rk3066a_pin_banks), + .label = "RK3066-GPIO", + .type = RK2928, + .grf_mux_offset = 0xa8, + .pull_calc_reg = rk3066a_calc_pull, +}; + +static const struct of_device_id rk3066a_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3066a-pinctrl", + .data = &rk3066a_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3066a_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3066a-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3066a_pinctrl_dt_match, + }, +}; + +static int __init rk3066a_pinctrl_init(void) +{ + return platform_driver_register(&rk3066a_pinctrl_driver); +} +postcore_initcall(rk3066a_pinctrl_init); + +MODULE_DESCRIPTION("RK3066A pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3066b.c b/drivers/pinctrl/rockchip/pinctrl-rk3066b.c new file mode 100644 index 000000000000..7353cc8caa37 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3066b.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +static struct rockchip_pin_bank rk3066b_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3066b_pin_ctrl = { + .pin_banks = rk3066b_pin_banks, + .nr_banks = ARRAY_SIZE(rk3066b_pin_banks), + .label = "RK3066b-GPIO", + .type = RK3066B, + .grf_mux_offset = 0x60, +}; + +static const struct of_device_id rk3066b_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3066b-pinctrl", + .data = &rk3066b_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3066b_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3066b-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3066b_pinctrl_dt_match, + }, +}; + +static int __init rk3066b_pinctrl_init(void) +{ + return platform_driver_register(&rk3066b_pinctrl_driver); +} +postcore_initcall(rk3066b_pinctrl_init); + +MODULE_DESCRIPTION("RK3066B pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3128.c b/drivers/pinctrl/rockchip/pinctrl-rk3128.c new file mode 100644 index 000000000000..da289019fd9c --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3128.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3128_PULL_GRF_OFFSET 0x118 +#define RK3128_PULL_PINS_PER_REG 16 +#define RK3128_PULL_BANK_STRIDE 8 + +static struct rockchip_mux_route_data rk3128_mux_route_data[] = { + { + /* spi-0 */ + .bank_num = 1, + .pin = 10, + .func = 1, + .route_offset = 0x144, + .route_val = BIT(16 + 3) | BIT(16 + 4), + }, { + /* spi-1 */ + .bank_num = 1, + .pin = 27, + .func = 3, + .route_offset = 0x144, + .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(3), + }, { + /* spi-2 */ + .bank_num = 0, + .pin = 13, + .func = 2, + .route_offset = 0x144, + .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(4), + }, { + /* i2s-0 */ + .bank_num = 1, + .pin = 5, + .func = 1, + .route_offset = 0x144, + .route_val = BIT(16 + 5), + }, { + /* i2s-1 */ + .bank_num = 0, + .pin = 14, + .func = 1, + .route_offset = 0x144, + .route_val = BIT(16 + 5) | BIT(5), + }, { + /* emmc-0 */ + .bank_num = 1, + .pin = 22, + .func = 2, + .route_offset = 0x144, + .route_val = BIT(16 + 6), + }, { + /* emmc-1 */ + .bank_num = 2, + .pin = 4, + .func = 2, + .route_offset = 0x144, + .route_val = BIT(16 + 6) | BIT(6), + }, +}; + +static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = { + { + .num = 2, + .pin = 20, + .reg = 0xe8, + .bit = 0, + .mask = 0x7 + }, { + .num = 2, + .pin = 21, + .reg = 0xe8, + .bit = 4, + .mask = 0x7 + }, { + .num = 2, + .pin = 22, + .reg = 0xe8, + .bit = 8, + .mask = 0x7 + }, { + .num = 2, + .pin = 23, + .reg = 0xe8, + .bit = 12, + .mask = 0x7 + }, { + .num = 2, + .pin = 24, + .reg = 0xd4, + .bit = 12, + .mask = 0x7 + }, +}; + +static void rk3128_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3128_PULL_GRF_OFFSET; + *reg += bank->bank_num * RK3128_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3128_PULL_PINS_PER_REG) * 4); + + *bit = pin_num % RK3128_PULL_PINS_PER_REG; +} + +static struct rockchip_pin_bank rk3128_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3128_pin_ctrl = { + .pin_banks = rk3128_pin_banks, + .nr_banks = ARRAY_SIZE(rk3128_pin_banks), + .label = "RK3128-GPIO", + .type = RK3128, + .grf_mux_offset = 0xa8, + .iomux_recalced = rk3128_mux_recalced_data, + .niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data), + .iomux_routes = rk3128_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3128_mux_route_data), + .pull_calc_reg = rk3128_calc_pull, +}; + +static const struct of_device_id rk3128_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3128-pinctrl", + .data = &rk3128_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3128_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3128-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3128_pinctrl_dt_match, + }, +}; + +static int __init rk3128_pinctrl_init(void) +{ + return platform_driver_register(&rk3128_pinctrl_driver); +} +postcore_initcall(rk3128_pinctrl_init); + +MODULE_DESCRIPTION("RK3128 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3188.c b/drivers/pinctrl/rockchip/pinctrl-rk3188.c new file mode 100644 index 000000000000..802e3791f8b4 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3188.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3188_PULL_GRF_OFFSET 0x164 +#define RK3188_PULL_PMU_OFFSET 0x64 +#define RK3188_PULL_BITS_PER_PIN 2 +#define RK3188_PULL_PINS_PER_REG 8 +#define RK3188_PULL_BANK_STRIDE 16 + +static void rk3188_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 12 pins of the first bank are located elsewhere */ + if (bank->bank_num == 0 && pin_num < 12) { + *regmap = info->regmap_pmu ? info->regmap_pmu + : bank->regmap_pull; + *reg = info->regmap_pmu ? RK3188_PULL_PMU_OFFSET : 0; + *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); + *bit = pin_num % RK3188_PULL_PINS_PER_REG; + *bit *= RK3188_PULL_BITS_PER_PIN; + } else { + *regmap = info->regmap_pull ? info->regmap_pull + : info->regmap_base; + *reg = info->regmap_pull ? 0 : RK3188_PULL_GRF_OFFSET; + + /* correct the offset, as it is the second pull register */ + *reg -= 4; + *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); + + /* + * The bits in these registers have an inverse ordering + * with the lowest pin being in bits 15:14 and the highest + * pin in bits 1:0 + */ + *bit = 7 - (pin_num % RK3188_PULL_PINS_PER_REG); + *bit *= RK3188_PULL_BITS_PER_PIN; + } +} + +static struct rockchip_pin_bank rk3188_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3188_pin_ctrl = { + .pin_banks = rk3188_pin_banks, + .nr_banks = ARRAY_SIZE(rk3188_pin_banks), + .label = "RK3188-GPIO", + .type = RK3188, + .grf_mux_offset = 0x60, + .pull_calc_reg = rk3188_calc_pull, +}; + +static struct regmap_config rockchip_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int rk3188_pinctrl_probe(struct platform_device *pdev) +{ + struct rockchip_pinctrl *info; + int ret; + + ret = rockchip_pctrl_probe(pdev); + if (ret) + return ret; + + info = platform_get_drvdata(pdev); + if (!info) + return -EINVAL; + + if (IS_ERR_OR_NULL(info->regmap_base)) { + struct resource *res; + void __iomem *base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + rockchip_regmap_config.max_register = resource_size(res) - 4; + rockchip_regmap_config.name = "rockchip,pinctrl"; + info->regmap_base = + devm_regmap_init_mmio(&pdev->dev, base, + &rockchip_regmap_config); + + /* to check for the old dt-bindings */ + info->reg_size = resource_size(res); + + /* Honor the old binding, with pull registers as 2nd resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + rockchip_regmap_config.max_register = + resource_size(res) - 4; + rockchip_regmap_config.name = "rockchip,pinctrl-pull"; + info->regmap_pull = + devm_regmap_init_mmio(&pdev->dev, + base, + &rockchip_regmap_config); + } + + return 0; +} + +static const struct of_device_id rk3188_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3188-pinctrl", + .data = &rk3188_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3188_pinctrl_driver = { + .probe = rk3188_pinctrl_probe, + .driver = { + .name = "rk3188-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3188_pinctrl_dt_match, + }, +}; + +static int __init rk3188_pinctrl_init(void) +{ + return platform_driver_register(&rk3188_pinctrl_driver); +} +postcore_initcall(rk3188_pinctrl_init); + +MODULE_DESCRIPTION("RK3188 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3228.c b/drivers/pinctrl/rockchip/pinctrl-rk3228.c new file mode 100644 index 000000000000..2a4e14f7dc6c --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3228.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3228_PULL_GRF_OFFSET 0x100 +#define RK3228_PULL_BITS_PER_PIN 2 +#define RK3228_PULL_PINS_PER_REG 8 +#define RK3228_PULL_BANK_STRIDE 16 + +#define RK3228_DRV_GRF_OFFSET 0x200 +#define RK3228_DRV_BITS_PER_PIN 2 +#define RK3228_DRV_PINS_PER_REG 8 +#define RK3228_DRV_BANK_STRIDE 16 + +static struct rockchip_mux_route_data rk3228_mux_route_data[] = { + { + /* pwm0-0 */ + .bank_num = 0, + .pin = 26, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16), + }, { + /* pwm0-1 */ + .bank_num = 3, + .pin = 21, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16) | BIT(0), + }, { + /* pwm1-0 */ + .bank_num = 0, + .pin = 27, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 1), + }, { + /* pwm1-1 */ + .bank_num = 0, + .pin = 30, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 1) | BIT(1), + }, { + /* pwm2-0 */ + .bank_num = 0, + .pin = 28, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 2), + }, { + /* pwm2-1 */ + .bank_num = 1, + .pin = 12, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 2) | BIT(2), + }, { + /* pwm3-0 */ + .bank_num = 3, + .pin = 26, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 3), + }, { + /* pwm3-1 */ + .bank_num = 1, + .pin = 11, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 3) | BIT(3), + }, { + /* sdio-0_d0 */ + .bank_num = 1, + .pin = 1, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 4), + }, { + /* sdio-1_d0 */ + .bank_num = 3, + .pin = 2, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 4) | BIT(4), + }, { + /* spi-0_rx */ + .bank_num = 0, + .pin = 13, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 5), + }, { + /* spi-1_rx */ + .bank_num = 2, + .pin = 0, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 5) | BIT(5), + }, { + /* emmc-0_cmd */ + .bank_num = 1, + .pin = 22, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 7), + }, { + /* emmc-1_cmd */ + .bank_num = 2, + .pin = 4, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 7) | BIT(7), + }, { + /* uart2-0_rx */ + .bank_num = 1, + .pin = 19, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 8), + }, { + /* uart2-1_rx */ + .bank_num = 1, + .pin = 10, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 8) | BIT(8), + }, { + /* uart1-0_rx */ + .bank_num = 1, + .pin = 10, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 11), + }, { + /* uart1-1_rx */ + .bank_num = 3, + .pin = 13, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 11) | BIT(11), + }, +}; + +static void rk3228_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3228_PULL_GRF_OFFSET; + *reg += bank->bank_num * RK3228_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3228_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3228_PULL_PINS_PER_REG); + *bit *= RK3228_PULL_BITS_PER_PIN; +} + +static void rk3228_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3228_DRV_GRF_OFFSET; + *reg += bank->bank_num * RK3228_DRV_BANK_STRIDE; + *reg += ((pin_num / RK3228_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3228_DRV_PINS_PER_REG); + *bit *= RK3228_DRV_BITS_PER_PIN; +} + +static struct rockchip_pin_bank rk3228_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3228_pin_ctrl = { + .pin_banks = rk3228_pin_banks, + .nr_banks = ARRAY_SIZE(rk3228_pin_banks), + .label = "RK3228-GPIO", + .type = RK3288, + .grf_mux_offset = 0x0, + .iomux_routes = rk3228_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3228_mux_route_data), + .pull_calc_reg = rk3228_calc_pull, + .drv_calc_reg = rk3228_calc_drv, +}; + +static const struct of_device_id rk3228_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3228-pinctrl", + .data = &rk3228_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3228_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3228-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3228_pinctrl_dt_match, + }, +}; + +static int __init rk3228_pinctrl_init(void) +{ + return platform_driver_register(&rk3228_pinctrl_driver); +} +postcore_initcall(rk3228_pinctrl_init); + +MODULE_DESCRIPTION("RK3228 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3288.c b/drivers/pinctrl/rockchip/pinctrl-rk3288.c new file mode 100644 index 000000000000..d1a37833a758 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3288.c @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3288_PULL_GRF_OFFSET 0x140 +#define RK3288_PULL_PMU_OFFSET 0x64 +#define RK3288_PULL_BITS_PER_PIN 2 +#define RK3288_PULL_PINS_PER_REG 8 +#define RK3288_PULL_BANK_STRIDE 16 + +#define RK3288_DRV_PMU_OFFSET 0x70 +#define RK3288_DRV_GRF_OFFSET 0x1c0 +#define RK3288_DRV_BITS_PER_PIN 2 +#define RK3288_DRV_PINS_PER_REG 8 +#define RK3288_DRV_BANK_STRIDE 16 + +#define RK3288_GRF_GPIO6C_IOMUX 0x64 +#define GPIO6C6_SEL_WRITE_ENABLE BIT(28) + +static u32 rk3288_grf_gpio6c_iomux; + +static struct rockchip_mux_route_data rk3288_mux_route_data[] = { + { + /* edphdmi_cecinoutt1 */ + .bank_num = 7, + .pin = 16, + .func = 2, + .route_offset = 0x264, + .route_val = BIT(16 + 12) | BIT(12), + }, { + /* edphdmi_cecinout */ + .bank_num = 7, + .pin = 23, + .func = 4, + .route_offset = 0x264, + .route_val = BIT(16 + 12), + }, +}; + +static void rk3288_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = RK3288_PULL_PMU_OFFSET; + + *reg += ((pin_num / RK3288_PULL_PINS_PER_REG) * 4); + *bit = pin_num % RK3288_PULL_PINS_PER_REG; + *bit *= RK3288_PULL_BITS_PER_PIN; + } else { + *regmap = info->regmap_base; + *reg = RK3288_PULL_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * RK3288_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3288_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3288_PULL_PINS_PER_REG); + *bit *= RK3288_PULL_BITS_PER_PIN; + } +} + +static void rk3288_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = RK3288_DRV_PMU_OFFSET; + + *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); + *bit = pin_num % RK3288_DRV_PINS_PER_REG; + *bit *= RK3288_DRV_BITS_PER_PIN; + } else { + *regmap = info->regmap_base; + *reg = RK3288_DRV_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE; + *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3288_DRV_PINS_PER_REG); + *bit *= RK3288_DRV_BITS_PER_PIN; + } +} + +static struct rockchip_pin_bank rk3288_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_UNROUTED), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", + IOMUX_UNROUTED, + IOMUX_UNROUTED, + IOMUX_UNROUTED, + 0), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, + IOMUX_UNROUTED), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, + IOMUX_WIDTH_4BIT), + PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + 0, 0), + PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", + IOMUX_UNROUTED, + 0, 0, + IOMUX_UNROUTED), + PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, + IOMUX_UNROUTED), + PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0, 0, + IOMUX_WIDTH_4BIT, + IOMUX_UNROUTED), + PIN_BANK(8, 16, "gpio8"), +}; + +static struct rockchip_pin_ctrl rk3288_pin_ctrl = { + .pin_banks = rk3288_pin_banks, + .nr_banks = ARRAY_SIZE(rk3288_pin_banks), + .label = "RK3288-GPIO", + .type = RK3288, + .grf_mux_offset = 0x0, + .pmu_mux_offset = 0x84, + .iomux_routes = rk3288_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3288_mux_route_data), + .pull_calc_reg = rk3288_calc_pull, + .drv_calc_reg = rk3288_calc_drv, +}; + +static int rk3288_pinctrl_suspend(struct device *dev) +{ + struct rockchip_pinctrl *info = dev_get_drvdata(dev); + int ret = pinctrl_force_sleep(info->pctl_dev); + + if (ret) + return ret; + + /* + * RK3288 GPIO6_C6 mux would be modified by Maskrom when resume, so save + * the setting here, and restore it at resume. + */ + ret = regmap_read(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, + &rk3288_grf_gpio6c_iomux); + if (ret) { + pinctrl_force_default(info->pctl_dev); + return ret; + } + + return 0; +} + +static int rk3288_pinctrl_resume(struct device *dev) +{ + struct rockchip_pinctrl *info = dev_get_drvdata(dev); + int ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, + rk3288_grf_gpio6c_iomux | + GPIO6C6_SEL_WRITE_ENABLE); + + if (ret) + return ret; + + return pinctrl_force_default(info->pctl_dev); +} + +SIMPLE_DEV_PM_OPS(rk3288_pinctrl_dev_pm_ops, + rk3288_pinctrl_suspend, + rk3288_pinctrl_resume); + +static const struct of_device_id rk3288_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3288-pinctrl", + .data = &rk3288_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3288_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3288-pinctrl", + .pm = &rk3288_pinctrl_dev_pm_ops, + .of_match_table = rk3288_pinctrl_dt_match, + }, +}; + +static int __init rk3288_pinctrl_init(void) +{ + return platform_driver_register(&rk3288_pinctrl_driver); +} +postcore_initcall(rk3288_pinctrl_init); + +MODULE_DESCRIPTION("RK3288 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3308.c b/drivers/pinctrl/rockchip/pinctrl-rk3308.c new file mode 100644 index 000000000000..7c9bf608c431 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3308.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3308_PULL_GRF_OFFSET 0xa0 +#define RK3308_PULL_BITS_PER_PIN 2 +#define RK3308_PULL_PINS_PER_REG 8 +#define RK3308_PULL_BANK_STRIDE 16 + +#define RK3308_DRV_GRF_OFFSET 0x100 +#define RK3308_DRV_BITS_PER_PIN 2 +#define RK3308_DRV_PINS_PER_REG 8 +#define RK3308_DRV_BANK_STRIDE 16 + +#define RK3308_SCHMITT_PINS_PER_REG 8 +#define RK3308_SCHMITT_BANK_STRIDE 16 +#define RK3308_SCHMITT_GRF_OFFSET 0x1a0 + +static struct rockchip_mux_route_data rk3308_mux_route_data[] = { + { + /* rtc_clk */ + .bank_num = 0, + .pin = 19, + .func = 1, + .route_offset = 0x314, + .route_val = BIT(16 + 0) | BIT(0), + }, { + /* uart2_rxm0 */ + .bank_num = 1, + .pin = 22, + .func = 2, + .route_offset = 0x314, + .route_val = BIT(16 + 2) | BIT(16 + 3), + }, { + /* uart2_rxm1 */ + .bank_num = 4, + .pin = 26, + .func = 2, + .route_offset = 0x314, + .route_val = BIT(16 + 2) | BIT(16 + 3) | BIT(2), + }, { + /* i2c3_sdam0 */ + .bank_num = 0, + .pin = 15, + .func = 2, + .route_offset = 0x608, + .route_val = BIT(16 + 8) | BIT(16 + 9), + }, { + /* i2c3_sdam1 */ + .bank_num = 3, + .pin = 12, + .func = 2, + .route_offset = 0x608, + .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(8), + }, { + /* i2c3_sdam2 */ + .bank_num = 2, + .pin = 0, + .func = 3, + .route_offset = 0x608, + .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(9), + }, { + /* i2s-8ch-1-sclktxm0 */ + .bank_num = 1, + .pin = 3, + .func = 2, + .route_offset = 0x308, + .route_val = BIT(16 + 3), + }, { + /* i2s-8ch-1-sclkrxm0 */ + .bank_num = 1, + .pin = 4, + .func = 2, + .route_offset = 0x308, + .route_val = BIT(16 + 3), + }, { + /* i2s-8ch-1-sclktxm1 */ + .bank_num = 1, + .pin = 13, + .func = 2, + .route_offset = 0x308, + .route_val = BIT(16 + 3) | BIT(3), + }, { + /* i2s-8ch-1-sclkrxm1 */ + .bank_num = 1, + .pin = 14, + .func = 2, + .route_offset = 0x308, + .route_val = BIT(16 + 3) | BIT(3), + }, { + /* pdm-clkm0 */ + .bank_num = 1, + .pin = 4, + .func = 3, + .route_offset = 0x308, + .route_val = BIT(16 + 12) | BIT(16 + 13), + }, { + /* pdm-clkm1 */ + .bank_num = 1, + .pin = 14, + .func = 4, + .route_offset = 0x308, + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12), + }, { + /* pdm-clkm2 */ + .bank_num = 2, + .pin = 6, + .func = 2, + .route_offset = 0x308, + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13), + }, { + /* pdm-clkm-m2 */ + .bank_num = 2, + .pin = 4, + .func = 3, + .route_offset = 0x600, + .route_val = BIT(16 + 2) | BIT(2), + }, { + /* spi1_miso */ + .bank_num = 3, + .pin = 10, + .func = 3, + .route_offset = 0x314, + .route_val = BIT(16 + 9), + }, { + /* spi1_miso_m1 */ + .bank_num = 2, + .pin = 4, + .func = 2, + .route_offset = 0x314, + .route_val = BIT(16 + 9) | BIT(9), + }, { + /* owire_m0 */ + .bank_num = 0, + .pin = 11, + .func = 3, + .route_offset = 0x314, + .route_val = BIT(16 + 10) | BIT(16 + 11), + }, { + /* owire_m1 */ + .bank_num = 1, + .pin = 22, + .func = 7, + .route_offset = 0x314, + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10), + }, { + /* owire_m2 */ + .bank_num = 2, + .pin = 2, + .func = 5, + .route_offset = 0x314, + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11), + }, { + /* can_rxd_m0 */ + .bank_num = 0, + .pin = 11, + .func = 2, + .route_offset = 0x314, + .route_val = BIT(16 + 12) | BIT(16 + 13), + }, { + /* can_rxd_m1 */ + .bank_num = 1, + .pin = 22, + .func = 5, + .route_offset = 0x314, + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12), + }, { + /* can_rxd_m2 */ + .bank_num = 2, + .pin = 2, + .func = 4, + .route_offset = 0x314, + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13), + }, { + /* mac_rxd0_m0 */ + .bank_num = 1, + .pin = 20, + .func = 3, + .route_offset = 0x314, + .route_val = BIT(16 + 14), + }, { + /* mac_rxd0_m1 */ + .bank_num = 4, + .pin = 2, + .func = 2, + .route_offset = 0x314, + .route_val = BIT(16 + 14) | BIT(14), + }, { + /* uart3_rx */ + .bank_num = 3, + .pin = 12, + .func = 4, + .route_offset = 0x314, + .route_val = BIT(16 + 15), + }, { + /* uart3_rx_m1 */ + .bank_num = 0, + .pin = 17, + .func = 3, + .route_offset = 0x314, + .route_val = BIT(16 + 15) | BIT(15), + }, +}; + +static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = { + { + .num = 1, + .pin = 14, + .reg = 0x28, + .bit = 12, + .mask = 0xf + }, { + .num = 1, + .pin = 15, + .reg = 0x2c, + .bit = 0, + .mask = 0x3 + }, { + .num = 1, + .pin = 18, + .reg = 0x30, + .bit = 4, + .mask = 0xf + }, { + .num = 1, + .pin = 19, + .reg = 0x30, + .bit = 8, + .mask = 0xf + }, { + .num = 1, + .pin = 20, + .reg = 0x30, + .bit = 12, + .mask = 0xf + }, { + .num = 1, + .pin = 21, + .reg = 0x34, + .bit = 0, + .mask = 0xf + }, { + .num = 1, + .pin = 22, + .reg = 0x34, + .bit = 4, + .mask = 0xf + }, { + .num = 1, + .pin = 23, + .reg = 0x34, + .bit = 8, + .mask = 0xf + }, { + .num = 3, + .pin = 12, + .reg = 0x68, + .bit = 8, + .mask = 0xf + }, { + .num = 3, + .pin = 13, + .reg = 0x68, + .bit = 12, + .mask = 0xf + }, { + .num = 2, + .pin = 2, + .reg = 0x608, + .bit = 0, + .mask = 0x7 + }, { + .num = 2, + .pin = 3, + .reg = 0x608, + .bit = 4, + .mask = 0x7 + }, { + .num = 2, + .pin = 16, + .reg = 0x610, + .bit = 8, + .mask = 0x7 + }, { + .num = 3, + .pin = 10, + .reg = 0x610, + .bit = 0, + .mask = 0x7 + }, { + .num = 3, + .pin = 11, + .reg = 0x610, + .bit = 4, + .mask = 0x7 + }, +}; + +static void rk3308_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3308_PULL_GRF_OFFSET; + *reg += bank->bank_num * RK3308_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3308_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3308_PULL_PINS_PER_REG); + *bit *= RK3308_PULL_BITS_PER_PIN; +} + +static void rk3308_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3308_DRV_GRF_OFFSET; + *reg += bank->bank_num * RK3308_DRV_BANK_STRIDE; + *reg += ((pin_num / RK3308_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3308_DRV_PINS_PER_REG); + *bit *= RK3308_DRV_BITS_PER_PIN; +} + +static int rk3308_calc_schmitt(struct rockchip_pin_bank *bank, + int pin_num, + struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3308_SCHMITT_GRF_OFFSET; + + *reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE; + *reg += ((pin_num / RK3308_SCHMITT_PINS_PER_REG) * 4); + *bit = pin_num % RK3308_SCHMITT_PINS_PER_REG; + + return 0; +} + +static struct rockchip_pin_bank rk3308_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT), + PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT, + IOMUX_WIDTH_2BIT), +}; + +static struct rockchip_pin_ctrl rk3308_pin_ctrl = { + .pin_banks = rk3308_pin_banks, + .nr_banks = ARRAY_SIZE(rk3308_pin_banks), + .label = "RK3308-GPIO", + .type = RK3308, + .grf_mux_offset = 0x0, + .iomux_recalced = rk3308_mux_recalced_data, + .niomux_recalced = ARRAY_SIZE(rk3308_mux_recalced_data), + .iomux_routes = rk3308_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3308_mux_route_data), + .pull_calc_reg = rk3308_calc_pull, + .drv_calc_reg = rk3308_calc_drv, + .schmitt_calc_reg = rk3308_calc_schmitt, +}; + +static const struct of_device_id rk3308_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3308-pinctrl", + .data = &rk3308_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3308_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3308-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3308_pinctrl_dt_match, + }, +}; + +static int __init rk3308_pinctrl_init(void) +{ + return platform_driver_register(&rk3308_pinctrl_driver); +} +postcore_initcall(rk3308_pinctrl_init); + +MODULE_DESCRIPTION("RK3308 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3328.c b/drivers/pinctrl/rockchip/pinctrl-rk3328.c new file mode 100644 index 000000000000..4eedddf10fbc --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3328.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3328_PULL_GRF_OFFSET 0x100 +#define RK3328_PULL_BITS_PER_PIN 2 +#define RK3328_PULL_PINS_PER_REG 8 +#define RK3328_PULL_BANK_STRIDE 16 + +#define RK3328_DRV_GRF_OFFSET 0x200 +#define RK3328_DRV_BITS_PER_PIN 2 +#define RK3328_DRV_PINS_PER_REG 8 +#define RK3328_DRV_BANK_STRIDE 16 + +#define RK3328_SCHMITT_GRF_OFFSET 0x380 +#define RK3328_SCHMITT_BITS_PER_PIN 1 +#define RK3328_SCHMITT_PINS_PER_REG 16 +#define RK3328_SCHMITT_BANK_STRIDE 8 + +static struct rockchip_mux_route_data rk3328_mux_route_data[] = { + { + /* uart2dbg_rxm0 */ + .bank_num = 1, + .pin = 1, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16) | BIT(16 + 1), + }, { + /* uart2dbg_rxm1 */ + .bank_num = 2, + .pin = 1, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16) | BIT(16 + 1) | BIT(0), + }, { + /* gmac-m1_rxd0 */ + .bank_num = 1, + .pin = 11, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 2) | BIT(2), + }, { + /* gmac-m1-optimized_rxd3 */ + .bank_num = 1, + .pin = 14, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 10) | BIT(10), + }, { + /* pdm_sdi0m0 */ + .bank_num = 2, + .pin = 19, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 3), + }, { + /* pdm_sdi0m1 */ + .bank_num = 1, + .pin = 23, + .func = 3, + .route_offset = 0x50, + .route_val = BIT(16 + 3) | BIT(3), + }, { + /* spi_rxdm2 */ + .bank_num = 3, + .pin = 2, + .func = 4, + .route_offset = 0x50, + .route_val = BIT(16 + 4) | BIT(16 + 5) | BIT(5), + }, { + /* i2s2_sdim0 */ + .bank_num = 1, + .pin = 24, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 6), + }, { + /* i2s2_sdim1 */ + .bank_num = 3, + .pin = 2, + .func = 6, + .route_offset = 0x50, + .route_val = BIT(16 + 6) | BIT(6), + }, { + /* card_iom1 */ + .bank_num = 2, + .pin = 22, + .func = 3, + .route_offset = 0x50, + .route_val = BIT(16 + 7) | BIT(7), + }, { + /* tsp_d5m1 */ + .bank_num = 2, + .pin = 16, + .func = 3, + .route_offset = 0x50, + .route_val = BIT(16 + 8) | BIT(8), + }, { + /* cif_data5m1 */ + .bank_num = 2, + .pin = 16, + .func = 4, + .route_offset = 0x50, + .route_val = BIT(16 + 9) | BIT(9), + }, +}; + +static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = { + { + .num = 2, + .pin = 8, + .reg = 0x24, + .bit = 0, + .mask = 0x3 + }, { + .num = 2, + .pin = 9, + .reg = 0x24, + .bit = 2, + .mask = 0x3 + }, { + .num = 2, + .pin = 10, + .reg = 0x24, + .bit = 4, + .mask = 0x3 + }, { + .num = 2, + .pin = 11, + .reg = 0x24, + .bit = 6, + .mask = 0x3 + }, { + .num = 2, + .pin = 12, + .reg = 0x24, + .bit = 8, + .mask = 0x3 + }, { + .num = 2, + .pin = 13, + .reg = 0x24, + .bit = 10, + .mask = 0x3 + }, { + .num = 2, + .pin = 14, + .reg = 0x24, + .bit = 12, + .mask = 0x3 + }, { + .num = 2, + .pin = 15, + .reg = 0x28, + .bit = 0, + .mask = 0x7 + }, { + .num = 2, + .pin = 23, + .reg = 0x30, + .bit = 14, + .mask = 0x3 + }, +}; + +static void rk3328_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3328_PULL_GRF_OFFSET; + *reg += bank->bank_num * RK3328_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3328_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3328_PULL_PINS_PER_REG); + *bit *= RK3328_PULL_BITS_PER_PIN; +} + +static void rk3328_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3328_DRV_GRF_OFFSET; + *reg += bank->bank_num * RK3328_DRV_BANK_STRIDE; + *reg += ((pin_num / RK3328_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3328_DRV_PINS_PER_REG); + *bit *= RK3328_DRV_BITS_PER_PIN; +} + +static int rk3328_calc_schmitt(struct rockchip_pin_bank *bank, + int pin_num, + struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + *regmap = info->regmap_base; + *reg = RK3328_SCHMITT_GRF_OFFSET; + + *reg += bank->bank_num * RK3328_SCHMITT_BANK_STRIDE; + *reg += ((pin_num / RK3328_SCHMITT_PINS_PER_REG) * 4); + *bit = pin_num % RK3328_SCHMITT_PINS_PER_REG; + + return 0; +} + +static struct rockchip_pin_bank rk3328_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, + IOMUX_WIDTH_3BIT, + IOMUX_WIDTH_3BIT, + 0), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", + IOMUX_WIDTH_3BIT, + IOMUX_WIDTH_3BIT, + 0, 0), +}; + +static struct rockchip_pin_ctrl rk3328_pin_ctrl = { + .pin_banks = rk3328_pin_banks, + .nr_banks = ARRAY_SIZE(rk3328_pin_banks), + .label = "RK3328-GPIO", + .type = RK3288, + .grf_mux_offset = 0x0, + .iomux_recalced = rk3328_mux_recalced_data, + .niomux_recalced = ARRAY_SIZE(rk3328_mux_recalced_data), + .iomux_routes = rk3328_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3328_mux_route_data), + .pull_calc_reg = rk3328_calc_pull, + .drv_calc_reg = rk3328_calc_drv, + .schmitt_calc_reg = rk3328_calc_schmitt, +}; + +static const struct of_device_id rk3328_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3328-pinctrl", + .data = &rk3328_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3328_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3328-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3328_pinctrl_dt_match, + }, +}; + +static int __init rk3328_pinctrl_init(void) +{ + return platform_driver_register(&rk3328_pinctrl_driver); +} +postcore_initcall(rk3328_pinctrl_init); + +MODULE_DESCRIPTION("RK3328 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3368.c b/drivers/pinctrl/rockchip/pinctrl-rk3368.c new file mode 100644 index 000000000000..f1bc71673fd2 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3368.c @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3368_PULL_GRF_OFFSET 0x100 +#define RK3368_PULL_PMU_OFFSET 0x10 +#define RK3368_PULL_BITS_PER_PIN 2 +#define RK3368_PULL_PINS_PER_REG 8 +#define RK3368_PULL_BANK_STRIDE 16 + +#define RK3368_DRV_GRF_OFFSET 0x200 +#define RK3368_DRV_PMU_OFFSET 0x20 +#define RK3368_DRV_BITS_PER_PIN 2 +#define RK3368_DRV_PINS_PER_REG 8 +#define RK3368_DRV_BANK_STRIDE 16 + +static void rk3368_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 32 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = RK3368_PULL_PMU_OFFSET; + + *reg += ((pin_num / RK3368_PULL_PINS_PER_REG) * 4); + *bit = pin_num % RK3368_PULL_PINS_PER_REG; + *bit *= RK3368_PULL_BITS_PER_PIN; + } else { + *regmap = info->regmap_base; + *reg = RK3368_PULL_GRF_OFFSET; + + /* correct the offset, as we're starting with the second bank */ + *reg -= 0x10; + *reg += bank->bank_num * RK3368_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3368_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3368_PULL_PINS_PER_REG); + *bit *= RK3368_PULL_BITS_PER_PIN; + } +} + +static void rk3368_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 32 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = RK3368_DRV_PMU_OFFSET; + + *reg += ((pin_num / RK3368_DRV_PINS_PER_REG) * 4); + *bit = pin_num % RK3368_DRV_PINS_PER_REG; + *bit *= RK3368_DRV_BITS_PER_PIN; + } else { + *regmap = info->regmap_base; + *reg = RK3368_DRV_GRF_OFFSET; + + /* correct the offset, as we're starting with the second bank */ + *reg -= 0x10; + *reg += bank->bank_num * RK3368_DRV_BANK_STRIDE; + *reg += ((pin_num / RK3368_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3368_DRV_PINS_PER_REG); + *bit *= RK3368_DRV_BITS_PER_PIN; + } +} + +static struct rockchip_pin_bank rk3368_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3368_pin_ctrl = { + .pin_banks = rk3368_pin_banks, + .nr_banks = ARRAY_SIZE(rk3368_pin_banks), + .label = "RK3368-GPIO", + .type = RK3368, + .grf_mux_offset = 0x0, + .pmu_mux_offset = 0x0, + .pull_calc_reg = rk3368_calc_pull, + .drv_calc_reg = rk3368_calc_drv, +}; + +static const struct of_device_id rk3368_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3368-pinctrl", + .data = &rk3368_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3368_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3368-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3368_pinctrl_dt_match, + }, +}; + +static int __init rk3368_pinctrl_init(void) +{ + return platform_driver_register(&rk3368_pinctrl_driver); +} +postcore_initcall(rk3368_pinctrl_init); + +MODULE_DESCRIPTION("RK3368 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3399.c b/drivers/pinctrl/rockchip/pinctrl-rk3399.c new file mode 100644 index 000000000000..3c23806037f4 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3399.c @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3399_PULL_GRF_OFFSET 0xe040 +#define RK3399_PULL_PMU_OFFSET 0x40 +#define RK3399_PULL_BITS_PER_PIN 2 +#define RK3399_PULL_PINS_PER_REG 8 +#define RK3399_PULL_BANK_STRIDE 16 + +static struct rockchip_mux_route_data rk3399_mux_route_data[] = { + { + /* uart2dbga_rx */ + .bank_num = 4, + .pin = 8, + .func = 2, + .route_offset = 0xe21c, + .route_val = BIT(16 + 10) | BIT(16 + 11), + }, { + /* uart2dbgb_rx */ + .bank_num = 4, + .pin = 16, + .func = 2, + .route_offset = 0xe21c, + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10), + }, { + /* uart2dbgc_rx */ + .bank_num = 4, + .pin = 19, + .func = 1, + .route_offset = 0xe21c, + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11), + }, { + /* pcie_clkreqn */ + .bank_num = 2, + .pin = 26, + .func = 2, + .route_offset = 0xe21c, + .route_val = BIT(16 + 14), + }, { + /* pcie_clkreqnb */ + .bank_num = 4, + .pin = 24, + .func = 1, + .route_offset = 0xe21c, + .route_val = BIT(16 + 14) | BIT(14), + }, +}; + +static void rk3399_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The bank0:16 and bank1:32 pins are located in PMU */ + if (bank->bank_num == 0 || bank->bank_num == 1) { + *regmap = info->regmap_pmu; + *reg = RK3399_PULL_PMU_OFFSET; + + *reg += bank->bank_num * RK3399_PULL_BANK_STRIDE; + + *reg += ((pin_num / RK3399_PULL_PINS_PER_REG) * 4); + *bit = pin_num % RK3399_PULL_PINS_PER_REG; + *bit *= RK3399_PULL_BITS_PER_PIN; + } else { + *regmap = info->regmap_base; + *reg = RK3399_PULL_GRF_OFFSET; + + /* correct the offset, as we're starting with the 3rd bank */ + *reg -= 0x20; + *reg += bank->bank_num * RK3399_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3399_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % RK3399_PULL_PINS_PER_REG); + *bit *= RK3399_PULL_BITS_PER_PIN; + } +} + +static void rk3399_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + int drv_num = (pin_num / 8); + + /* The bank0:16 and bank1:32 pins are located in PMU */ + if (bank->bank_num == 0 || bank->bank_num == 1) + *regmap = info->regmap_pmu; + else + *regmap = info->regmap_base; + + *reg = bank->drv[drv_num].offset; + if (bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO || + bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY) + *bit = (pin_num % 8) * 3; + else + *bit = (pin_num % 8) * 2; +} + +static struct rockchip_pin_bank rk3399_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(0, 32, "gpio0", + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_DEFAULT, + DRV_TYPE_IO_DEFAULT, + 0x80, + 0x88, + -1, + -1, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_DEFAULT, + PULL_TYPE_IO_DEFAULT), + PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + 0xa0, + 0xa8, + 0xb0, + 0xb8), + PIN_BANK_DRV_FLAGS_PULL_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_DEFAULT, + PULL_TYPE_IO_DEFAULT, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_1V8_ONLY), + PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_1V8_OR_3V0), + PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_3V0_AUTO, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0), +}; + +static struct rockchip_pin_ctrl rk3399_pin_ctrl = { + .pin_banks = rk3399_pin_banks, + .nr_banks = ARRAY_SIZE(rk3399_pin_banks), + .label = "RK3399-GPIO", + .type = RK3399, + .grf_mux_offset = 0xe000, + .pmu_mux_offset = 0x0, + .grf_drv_offset = 0xe100, + .pmu_drv_offset = 0x80, + .iomux_routes = rk3399_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3399_mux_route_data), + .pull_calc_reg = rk3399_calc_pull, + .drv_calc_reg = rk3399_calc_drv, +}; + +static const struct of_device_id rk3399_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk3399-pinctrl", + .data = &rk3399_pin_ctrl }, + {}, +}; + +static struct platform_driver rk3399_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rk3399-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rk3399_pinctrl_dt_match, + }, +}; + +static int __init rk3399_pinctrl_init(void) +{ + return platform_driver_register(&rk3399_pinctrl_driver); +} +postcore_initcall(rk3399_pinctrl_init); + +MODULE_DESCRIPTION("RK3399 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip.c b/drivers/pinctrl/rockchip/pinctrl-rockchip.c new file mode 100644 index 000000000000..16b013026fda --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip.c @@ -0,0 +1,2043 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + * + * Pinctrl driver for Rockchip SoCs + * + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner + * + * With some ideas taken from pinctrl-samsung: + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2012 Linaro Ltd + * http://www.linaro.org + * + * and pinctrl-at91: + * Copyright (C) 2011-2012 Jean-Christophe + * PLAGNIOL-VILLARD + */ + +#include "pinctrl-rockchip.h" + +/* GPIO control registers */ +#define GPIO_SWPORT_DR 0x00 +#define GPIO_SWPORT_DDR 0x04 +#define GPIO_INTEN 0x30 +#define GPIO_INTMASK 0x34 +#define GPIO_INTTYPE_LEVEL 0x38 +#define GPIO_INT_POLARITY 0x3c +#define GPIO_INT_STATUS 0x40 +#define GPIO_INT_RAWSTATUS 0x44 +#define GPIO_DEBOUNCE 0x48 +#define GPIO_PORTS_EOI 0x4c +#define GPIO_EXT_PORT 0x50 +#define GPIO_LS_SYNC 0x60 + +#define RK3188_PULL_BITS_PER_PIN 2 +#define RK3288_DRV_BITS_PER_PIN 2 +#define RK3399_DRV_3BITS_PER_PIN 3 + +static struct regmap_config rockchip_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static inline const struct rockchip_pin_group * +pinctrl_name_to_group(const struct rockchip_pinctrl *info, + const char *name) +{ + int i; + + for (i = 0; i < info->ngroups; i++) { + if (!strcmp(info->groups[i].name, name)) + return &info->groups[i]; + } + + return NULL; +} + +/* + * given a pin number that is local to a pin controller, find out the pin bank + * and the register base of the pin bank. + */ +static struct rockchip_pin_bank *pin_to_bank(struct rockchip_pinctrl *info, + unsigned int pin) +{ + struct rockchip_pin_bank *b = info->ctrl->pin_banks; + + while (pin >= (b->pin_base + b->nr_pins)) + b++; + + return b; +} + +static struct rockchip_pin_bank * +bank_num_to_bank(struct rockchip_pinctrl *info, unsigned int num) +{ + struct rockchip_pin_bank *b = info->ctrl->pin_banks; + int i; + + for (i = 0; i < info->ctrl->nr_banks; i++, b++) { + if (b->bank_num == num) + return b; + } + + return ERR_PTR(-EINVAL); +} + +/* + * Pinctrl_ops handling + */ + +static int rockchip_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->ngroups; +} + +static const char *rockchip_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->groups[selector].name; +} + +static int rockchip_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int selector, + const unsigned int **pins, + unsigned int *npins) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + if (selector >= info->ngroups) + return -EINVAL; + + *pins = info->groups[selector].pins; + *npins = info->groups[selector].npins; + + return 0; +} + +static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *num_maps) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct rockchip_pin_group *grp; + struct pinctrl_map *new_map; + struct device_node *parent; + int map_num = 1; + int i; + + /* + * first find the group of this node and check if we need to create + * config maps for pins + */ + grp = pinctrl_name_to_group(info, np->name); + if (!grp) { + dev_err(info->dev, "unable to find group for node %pOFn\n", + np); + return -EINVAL; + } + + map_num += grp->npins; + new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), + GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + *map = new_map; + *num_maps = map_num; + + /* create mux map */ + parent = of_get_parent(np); + if (!parent) { + devm_kfree(pctldev->dev, new_map); + return -EINVAL; + } + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; + new_map[0].data.mux.function = parent->name; + new_map[0].data.mux.group = np->name; + of_node_put(parent); + + /* create config map */ + new_map++; + for (i = 0; i < grp->npins; i++) { + new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; + new_map[i].data.configs.group_or_pin = + pin_get_name(pctldev, grp->pins[i]); + new_map[i].data.configs.configs = grp->data[i].configs; + new_map[i].data.configs.num_configs = grp->data[i].nconfigs; + } + + dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", + (*map)->data.mux.function, (*map)->data.mux.group, map_num); + + return 0; +} + +static void rockchip_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, + unsigned int num_maps) +{ +} + +static const struct pinctrl_ops rockchip_pctrl_ops = { + .get_groups_count = rockchip_get_groups_count, + .get_group_name = rockchip_get_group_name, + .get_group_pins = rockchip_get_group_pins, + .dt_node_to_map = rockchip_dt_node_to_map, + .dt_free_map = rockchip_dt_free_map, +}; + +static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin, + int *reg, u8 *bit, int *mask) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct rockchip_mux_recalced_data *data; + int i; + + for (i = 0; i < ctrl->niomux_recalced; i++) { + data = &ctrl->iomux_recalced[i]; + if (data->num == bank->bank_num && + data->pin == pin) + break; + } + + if (i >= ctrl->niomux_recalced) + return; + + *reg = data->reg; + *mask = data->mask; + *bit = data->bit; +} + +static bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin, + int mux, u32 *loc, u32 *reg, u32 *value) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct rockchip_mux_route_data *data; + int i; + + for (i = 0; i < ctrl->niomux_routes; i++) { + data = &ctrl->iomux_routes[i]; + if (data->bank_num == bank->bank_num && + data->pin == pin && data->func == mux) + break; + } + + if (i >= ctrl->niomux_routes) + return false; + + *loc = data->route_location; + *reg = data->route_offset; + *value = data->route_val; + + return true; +} + +static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin) +{ + struct rockchip_pinctrl *info = bank->drvdata; + int iomux_num = (pin / 8); + struct regmap *regmap; + unsigned int val; + int reg, ret, mask, mux_type; + u8 bit; + + if (iomux_num > 3) + return -EINVAL; + + if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { + dev_err(info->dev, "pin %d is unrouted\n", pin); + return -EINVAL; + } + + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) + return RK_FUNC_GPIO; + + regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) + ? info->regmap_pmu : info->regmap_base; + + /* get basic quadrupel of mux registers and the correct reg inside */ + mux_type = bank->iomux[iomux_num].type; + reg = bank->iomux[iomux_num].offset; + if (mux_type & IOMUX_WIDTH_4BIT) { + if ((pin % 8) >= 4) + reg += 0x4; + bit = (pin % 4) * 4; + mask = 0xf; + } else if (mux_type & IOMUX_WIDTH_3BIT) { + if ((pin % 8) >= 5) + reg += 0x4; + bit = (pin % 8 % 5) * 3; + mask = 0x7; + } else { + bit = (pin % 8) * 2; + mask = 0x3; + } + + if (bank->recalced_mask & BIT(pin)) + rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); + + ret = regmap_read(regmap, reg, &val); + if (ret) + return ret; + + return ((val >> bit) & mask); +} + +static int rockchip_verify_mux(struct rockchip_pin_bank *bank, + int pin, int mux) +{ + struct rockchip_pinctrl *info = bank->drvdata; + int iomux_num = (pin / 8); + + if (iomux_num > 3) + return -EINVAL; + + if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { + dev_err(info->dev, "pin %d is unrouted\n", pin); + return -EINVAL; + } + + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) { + if (mux != RK_FUNC_GPIO) { + dev_err(info->dev, + "pin %d only supports a gpio mux\n", pin); + return -ENOTSUPP; + } + } + + return 0; +} + +/* + * Set a new mux function for a pin. + * + * The register is divided into the upper and lower 16 bit. When changing + * a value, the previous register value is not read and changed. Instead + * it seems the changed bits are marked in the upper 16 bit, while the + * changed value gets set in the same offset in the lower 16 bit. + * All pin settings seem to be 2 bit wide in both the upper and lower + * parts. + * @bank: pin bank to change + * @pin: pin to change + * @mux: new mux function to set + */ +static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) +{ + struct rockchip_pinctrl *info = bank->drvdata; + int iomux_num = (pin / 8); + struct regmap *regmap; + int reg, ret, mask, mux_type; + u8 bit; + u32 data, rmask, route_location, route_reg, route_val; + + ret = rockchip_verify_mux(bank, pin, mux); + if (ret < 0) + return ret; + + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) + return 0; + + dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n", + bank->bank_num, pin, mux); + + regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) + ? info->regmap_pmu : info->regmap_base; + + /* get basic quadrupel of mux registers and the correct reg inside */ + mux_type = bank->iomux[iomux_num].type; + reg = bank->iomux[iomux_num].offset; + if (mux_type & IOMUX_WIDTH_4BIT) { + if ((pin % 8) >= 4) + reg += 0x4; + bit = (pin % 4) * 4; + mask = 0xf; + } else if (mux_type & IOMUX_WIDTH_3BIT) { + if ((pin % 8) >= 5) + reg += 0x4; + bit = (pin % 8 % 5) * 3; + mask = 0x7; + } else { + bit = (pin % 8) * 2; + mask = 0x3; + } + + if (bank->recalced_mask & BIT(pin)) + rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); + + if (bank->route_mask & BIT(pin)) { + if (rockchip_get_mux_route(bank, pin, mux, &route_location, + &route_reg, &route_val)) { + struct regmap *route_regmap = regmap; + + /* handle special locations */ + switch (route_location) { + case ROCKCHIP_ROUTE_PMU: + route_regmap = info->regmap_pmu; + break; + case ROCKCHIP_ROUTE_GRF: + route_regmap = info->regmap_base; + break; + } + + ret = regmap_write(route_regmap, route_reg, route_val); + if (ret) + return ret; + } + } + + data = (mask << (bit + 16)); + rmask = data | (data >> 16); + data |= (mux & mask) << bit; + ret = regmap_update_bits(regmap, reg, rmask, data); + + return ret; +} + +static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = { + { 2, 4, 8, 12, -1, -1, -1, -1 }, + { 3, 6, 9, 12, -1, -1, -1, -1 }, + { 5, 10, 15, 20, -1, -1, -1, -1 }, + { 4, 6, 8, 10, 12, 14, 16, 18 }, + { 4, 7, 10, 13, 16, 19, 22, 26 } +}; + +static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank, + int pin_num) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct regmap *regmap; + int reg, ret; + u32 data, temp, rmask_bits; + u8 bit; + int drv_type = bank->drv[pin_num / 8].drv_type; + + ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); + + switch (drv_type) { + case DRV_TYPE_IO_1V8_3V0_AUTO: + case DRV_TYPE_IO_3V3_ONLY: + rmask_bits = RK3399_DRV_3BITS_PER_PIN; + switch (bit) { + case 0 ... 12: + /* regular case, nothing to do */ + break; + case 15: + /* + * drive-strength offset is special, as it is + * spread over 2 registers + */ + ret = regmap_read(regmap, reg, &data); + if (ret) + return ret; + + ret = regmap_read(regmap, reg + 0x4, &temp); + if (ret) + return ret; + + /* + * the bit data[15] contains bit 0 of the value + * while temp[1:0] contains bits 2 and 1 + */ + data >>= 15; + temp &= 0x3; + temp <<= 1; + data |= temp; + + return rockchip_perpin_drv_list[drv_type][data]; + case 18 ... 21: + /* setting fully enclosed in the second register */ + reg += 4; + bit -= 16; + break; + default: + dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", + bit, drv_type); + return -EINVAL; + } + + break; + case DRV_TYPE_IO_DEFAULT: + case DRV_TYPE_IO_1V8_OR_3V0: + case DRV_TYPE_IO_1V8_ONLY: + rmask_bits = RK3288_DRV_BITS_PER_PIN; + break; + default: + dev_err(info->dev, "unsupported pinctrl drive type: %d\n", + drv_type); + return -EINVAL; + } + + ret = regmap_read(regmap, reg, &data); + if (ret) + return ret; + + data >>= bit; + data &= (1 << rmask_bits) - 1; + + return rockchip_perpin_drv_list[drv_type][data]; +} + +static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, + int pin_num, int strength) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct regmap *regmap; + int reg, ret, i; + u32 data, rmask, rmask_bits, temp; + u8 bit; + int drv_type = bank->drv[pin_num / 8].drv_type; + + dev_dbg(info->dev, "setting drive of GPIO%d-%d to %d\n", + bank->bank_num, pin_num, strength); + + ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); + + ret = -EINVAL; + for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) { + if (rockchip_perpin_drv_list[drv_type][i] == strength) { + ret = i; + break; + } else if (rockchip_perpin_drv_list[drv_type][i] < 0) { + ret = rockchip_perpin_drv_list[drv_type][i]; + break; + } + } + + if (ret < 0) { + dev_err(info->dev, "unsupported driver strength %d\n", + strength); + return ret; + } + + switch (drv_type) { + case DRV_TYPE_IO_1V8_3V0_AUTO: + case DRV_TYPE_IO_3V3_ONLY: + rmask_bits = RK3399_DRV_3BITS_PER_PIN; + switch (bit) { + case 0 ... 12: + /* regular case, nothing to do */ + break; + case 15: + /* + * drive-strength offset is special, as it is spread + * over 2 registers, the bit data[15] contains bit 0 + * of the value while temp[1:0] contains bits 2 and 1 + */ + data = (ret & 0x1) << 15; + temp = (ret >> 0x1) & 0x3; + + rmask = BIT(15) | BIT(31); + data |= BIT(31); + ret = regmap_update_bits(regmap, reg, rmask, data); + if (ret) + return ret; + + rmask = 0x3 | (0x3 << 16); + temp |= (0x3 << 16); + reg += 0x4; + ret = regmap_update_bits(regmap, reg, rmask, temp); + + return ret; + case 18 ... 21: + /* setting fully enclosed in the second register */ + reg += 4; + bit -= 16; + break; + default: + dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", + bit, drv_type); + return -EINVAL; + } + break; + case DRV_TYPE_IO_DEFAULT: + case DRV_TYPE_IO_1V8_OR_3V0: + case DRV_TYPE_IO_1V8_ONLY: + rmask_bits = RK3288_DRV_BITS_PER_PIN; + break; + default: + dev_err(info->dev, "unsupported pinctrl drive type: %d\n", + drv_type); + return -EINVAL; + } + + /* enable the write to the equivalent lower bits */ + data = ((1 << rmask_bits) - 1) << (bit + 16); + rmask = data | (data >> 16); + data |= (ret << bit); + + ret = regmap_update_bits(regmap, reg, rmask, data); + + return ret; +} + +static int rockchip_pull_list[PULL_TYPE_MAX][4] = { + { + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_PULL_UP, + PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_BIAS_BUS_HOLD + }, + { + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_PULL_UP + }, +}; + +static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct regmap *regmap; + int reg, ret, pull_type; + u8 bit; + u32 data; + + /* rk3066b does support any pulls */ + if (ctrl->type == RK3066B) + return PIN_CONFIG_BIAS_DISABLE; + + ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit); + + ret = regmap_read(regmap, reg, &data); + if (ret) + return ret; + + switch (ctrl->type) { + case RK2928: + case RK3128: + return !(data & BIT(bit)) + ? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT + : PIN_CONFIG_BIAS_DISABLE; + case PX30: + case RV1108: + case RK3188: + case RK3288: + case RK3308: + case RK3368: + case RK3399: + pull_type = bank->pull_type[pin_num / 8]; + data >>= bit; + data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1; + + return rockchip_pull_list[pull_type][data]; + default: + dev_err(info->dev, "unsupported pinctrl type\n"); + return -EINVAL; + }; +} + +static int rockchip_set_pull(struct rockchip_pin_bank *bank, + int pin_num, int pull) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct regmap *regmap; + int reg, ret, i, pull_type; + u8 bit; + u32 data, rmask; + + dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n", + bank->bank_num, pin_num, pull); + + /* rk3066b does support any pulls */ + if (ctrl->type == RK3066B) + return pull ? -EINVAL : 0; + + ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit); + + switch (ctrl->type) { + case RK2928: + case RK3128: + data = BIT(bit + 16); + if (pull == PIN_CONFIG_BIAS_DISABLE) + data |= BIT(bit); + ret = regmap_write(regmap, reg, data); + break; + case PX30: + case RV1108: + case RK3188: + case RK3288: + case RK3308: + case RK3368: + case RK3399: + pull_type = bank->pull_type[pin_num / 8]; + ret = -EINVAL; + for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[pull_type]); + i++) { + if (rockchip_pull_list[pull_type][i] == pull) { + ret = i; + break; + } + } + + if (ret < 0) { + dev_err(info->dev, "unsupported pull setting %d\n", + pull); + return ret; + } + + /* enable the write to the equivalent lower bits */ + data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16); + rmask = data | (data >> 16); + data |= (ret << bit); + + ret = regmap_update_bits(regmap, reg, rmask, data); + break; + default: + dev_err(info->dev, "unsupported pinctrl type\n"); + return -EINVAL; + } + + return ret; +} + +static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct regmap *regmap; + int reg, ret; + u8 bit; + u32 data; + + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); + if (ret) + return ret; + + ret = regmap_read(regmap, reg, &data); + if (ret) + return ret; + + data >>= bit; + return data & 0x1; +} + +static int rockchip_set_schmitt(struct rockchip_pin_bank *bank, + int pin_num, int enable) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct regmap *regmap; + int reg, ret; + u8 bit; + u32 data, rmask; + + dev_dbg(info->dev, "setting input schmitt of GPIO%d-%d to %d\n", + bank->bank_num, pin_num, enable); + + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); + if (ret) + return ret; + + /* enable the write to the equivalent lower bits */ + data = BIT(bit + 16) | (enable << bit); + rmask = BIT(bit + 16) | BIT(bit); + + return regmap_update_bits(regmap, reg, rmask, data); +} + +/* + * Pinmux_ops handling + */ + +static int rockchip_pmx_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->nfunctions; +} + +static const char *rockchip_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->functions[selector].name; +} + +static int rockchip_pmx_get_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned int * const num_groups) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + *groups = info->functions[selector].groups; + *num_groups = info->functions[selector].ngroups; + + return 0; +} + +static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned int selector, + unsigned int group) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const unsigned int *pins = info->groups[group].pins; + const struct rockchip_pin_config *data = info->groups[group].data; + struct rockchip_pin_bank *bank; + int cnt, ret = 0; + + dev_dbg(info->dev, "enable function %s group %s\n", + info->functions[selector].name, info->groups[group].name); + + /* + * for each pin in the pin group selected, program the corresponding + * pin function number in the config register. + */ + for (cnt = 0; cnt < info->groups[group].npins; cnt++) { + bank = pin_to_bank(info, pins[cnt]); + ret = rockchip_set_mux(bank, pins[cnt] - bank->pin_base, + data[cnt].func); + if (ret) + break; + } + + if (ret) { + /* revert the already done pin settings */ + for (cnt--; cnt >= 0; cnt--) + rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0); + + return ret; + } + + return 0; +} + +static int rockchip_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct rockchip_pin_bank *bank = gpiochip_get_data(chip); + u32 data; + int ret; + + ret = clk_enable(bank->clk); + if (ret < 0) { + dev_err(bank->drvdata->dev, + "failed to enable clock for bank %s\n", bank->name); + return ret; + } + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); + clk_disable(bank->clk); + + return !(data & BIT(offset)); +} + +/* + * The calls to gpio_direction_output() and gpio_direction_input() + * leads to this function call (via the pinctrl_gpio_direction_{input|output}() + * function called from the gpiolib interface). + */ +static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip, + int pin, bool input) +{ + struct rockchip_pin_bank *bank; + int ret; + unsigned long flags; + u32 data; + + bank = gpiochip_get_data(chip); + + ret = rockchip_set_mux(bank, pin, RK_FUNC_GPIO); + if (ret < 0) + return ret; + + clk_enable(bank->clk); + raw_spin_lock_irqsave(&bank->slock, flags); + + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); + /* set bit to 1 for output, 0 for input */ + if (!input) + data |= BIT(pin); + else + data &= ~BIT(pin); + writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); + + raw_spin_unlock_irqrestore(&bank->slock, flags); + clk_disable(bank->clk); + + return 0; +} + +static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int offset, bool input) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct gpio_chip *chip; + int pin; + + chip = range->gc; + pin = offset - chip->base; + dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n", + offset, range->name, pin, input ? "input" : "output"); + + return _rockchip_pmx_gpio_set_direction(chip, offset - chip->base, + input); +} + +static const struct pinmux_ops rockchip_pmx_ops = { + .get_functions_count = rockchip_pmx_get_funcs_count, + .get_function_name = rockchip_pmx_get_func_name, + .get_function_groups = rockchip_pmx_get_groups, + .set_mux = rockchip_pmx_set, + .gpio_set_direction = rockchip_pmx_gpio_set_direction, +}; + +/* + * Pinconf_ops handling + */ + +static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, + enum pin_config_param pull) +{ + switch (ctrl->type) { + case RK2928: + case RK3128: + return (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT || + pull == PIN_CONFIG_BIAS_DISABLE); + case RK3066B: + return pull ? false : true; + case PX30: + case RV1108: + case RK3188: + case RK3288: + case RK3308: + case RK3368: + case RK3399: + return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT); + } + + return false; +} + +static void rockchip_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value); +static int rockchip_gpio_get(struct gpio_chip *gc, unsigned int offset); + +/* set the pin config settings for a specified pin */ +static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *configs, + unsigned int num_configs) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct rockchip_pin_bank *bank = pin_to_bank(info, pin); + enum pin_config_param param; + u32 arg; + int i; + int rc; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + rc = rockchip_set_pull(bank, pin - bank->pin_base, + param); + if (rc) + return rc; + break; + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + case PIN_CONFIG_BIAS_BUS_HOLD: + if (!rockchip_pinconf_pull_valid(info->ctrl, param)) + return -ENOTSUPP; + + if (!arg) + return -EINVAL; + + rc = rockchip_set_pull(bank, pin - bank->pin_base, + param); + if (rc) + return rc; + break; + case PIN_CONFIG_OUTPUT: + rockchip_gpio_set(&bank->gpio_chip, + pin - bank->pin_base, arg); + rc = + _rockchip_pmx_gpio_set_direction(&bank->gpio_chip, + pin - bank->pin_base, + false); + if (rc) + return rc; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + /* rk3288 is the first with per-pin drive-strength */ + if (!info->ctrl->drv_calc_reg) + return -ENOTSUPP; + + rc = + rockchip_set_drive_perpin(bank, + pin - bank->pin_base, arg); + if (rc < 0) + return rc; + break; + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + if (!info->ctrl->schmitt_calc_reg) + return -ENOTSUPP; + + rc = rockchip_set_schmitt(bank, + pin - bank->pin_base, arg); + if (rc < 0) + return rc; + break; + default: + return -ENOTSUPP; + } + } /* for each config */ + + return 0; +} + +/* get the pin config settings for a specified pin */ +static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct rockchip_pin_bank *bank = pin_to_bank(info, pin); + enum pin_config_param param = pinconf_to_config_param(*config); + u16 arg; + int rc; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (rockchip_get_pull(bank, pin - bank->pin_base) != param) + return -EINVAL; + + arg = 0; + break; + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + case PIN_CONFIG_BIAS_BUS_HOLD: + if (!rockchip_pinconf_pull_valid(info->ctrl, param)) + return -ENOTSUPP; + + if (rockchip_get_pull(bank, pin - bank->pin_base) != param) + return -EINVAL; + + arg = 1; + break; + case PIN_CONFIG_OUTPUT: + rc = rockchip_get_mux(bank, pin - bank->pin_base); + if (rc != RK_FUNC_GPIO) + return -EINVAL; + + rc = rockchip_gpio_get(&bank->gpio_chip, pin - bank->pin_base); + if (rc < 0) + return rc; + + arg = rc ? 1 : 0; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + /* rk3288 is the first with per-pin drive-strength */ + if (!info->ctrl->drv_calc_reg) + return -ENOTSUPP; + + rc = rockchip_get_drive_perpin(bank, pin - bank->pin_base); + if (rc < 0) + return rc; + + arg = rc; + break; + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + if (!info->ctrl->schmitt_calc_reg) + return -ENOTSUPP; + + rc = rockchip_get_schmitt(bank, pin - bank->pin_base); + if (rc < 0) + return rc; + + arg = rc; + break; + default: + return -ENOTSUPP; + } + + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static const struct pinconf_ops rockchip_pinconf_ops = { + .pin_config_get = rockchip_pinconf_get, + .pin_config_set = rockchip_pinconf_set, + .is_generic = true, +}; + +static const struct of_device_id rockchip_bank_match[] = { + { .compatible = "rockchip,gpio-bank" }, + { .compatible = "rockchip,rk3188-gpio-bank0" }, + {}, +}; + +static void rockchip_pctrl_child_count(struct rockchip_pinctrl *info, + struct device_node *np) +{ + struct device_node *child; + + for_each_child_of_node(np, child) { + if (of_match_node(rockchip_bank_match, child)) + continue; + + info->nfunctions++; + info->ngroups += of_get_child_count(child); + } +} + +static int rockchip_pctrl_parse_groups(struct device_node *np, + struct rockchip_pin_group *grp, + struct rockchip_pinctrl *info, + u32 index) +{ + struct rockchip_pin_bank *bank; + int size; + const __be32 *list; + int num; + int i, j; + int ret; + + dev_dbg(info->dev, "group(%d): %pOFn\n", index, np); + + /* Initialise group */ + grp->name = np->name; + + /* + * the binding format is rockchip,pins = , + * do sanity check and calculate pins number + */ + list = of_get_property(np, "rockchip,pins", &size); + /* we do not check return since it's safe node passed down */ + size /= sizeof(*list); + if (!size || size % 4) { + dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n"); + return -EINVAL; + } + + grp->npins = size / 4; + + grp->pins = devm_kcalloc(info->dev, grp->npins, sizeof(unsigned int), + GFP_KERNEL); + grp->data = devm_kcalloc(info->dev, + grp->npins, + sizeof(struct rockchip_pin_config), + GFP_KERNEL); + if (!grp->pins || !grp->data) + return -ENOMEM; + + for (i = 0, j = 0; i < size; i += 4, j++) { + const __be32 *phandle; + struct device_node *np_config; + + num = be32_to_cpu(*list++); + bank = bank_num_to_bank(info, num); + if (IS_ERR(bank)) + return PTR_ERR(bank); + + grp->pins[j] = bank->pin_base + be32_to_cpu(*list++); + grp->data[j].func = be32_to_cpu(*list++); + + phandle = list++; + if (!phandle) + return -EINVAL; + + np_config = of_find_node_by_phandle(be32_to_cpup(phandle)); + ret = pinconf_generic_parse_dt_config(np_config, NULL, + &grp->data[j].configs, + &grp->data[j].nconfigs); + if (ret) + return ret; + } + + return 0; +} + +static int rockchip_pctrl_parse_functions(struct device_node *np, + struct rockchip_pinctrl *info, + u32 index) +{ + struct device_node *child; + struct rockchip_pmx_func *func; + struct rockchip_pin_group *grp; + int ret; + static u32 grp_index; + u32 i = 0; + + dev_dbg(info->dev, "parse function(%d): %pOFn\n", index, np); + + func = &info->functions[index]; + + /* Initialise function */ + func->name = np->name; + func->ngroups = of_get_child_count(np); + if (func->ngroups <= 0) + return 0; + + func->groups = devm_kcalloc(info->dev, func->ngroups, + sizeof(char *), GFP_KERNEL); + if (!func->groups) + return -ENOMEM; + + for_each_child_of_node(np, child) { + func->groups[i] = child->name; + grp = &info->groups[grp_index++]; + ret = rockchip_pctrl_parse_groups(child, grp, info, i++); + if (ret) { + of_node_put(child); + return ret; + } + } + + return 0; +} + +static int rockchip_pctrl_parse_dt(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child; + int ret; + int i; + + rockchip_pctrl_child_count(info, np); + + dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); + dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); + + info->functions = devm_kcalloc(dev, info->nfunctions, + sizeof(struct rockchip_pmx_func), + GFP_KERNEL); + if (!info->functions) + return -EINVAL; + + info->groups = devm_kcalloc(dev, info->ngroups, + sizeof(struct rockchip_pin_group), + GFP_KERNEL); + if (!info->groups) + return -EINVAL; + + i = 0; + + for_each_child_of_node(np, child) { + if (of_match_node(rockchip_bank_match, child)) + continue; + + ret = rockchip_pctrl_parse_functions(child, info, i++); + if (ret) { + dev_err(&pdev->dev, "failed to parse function\n"); + of_node_put(child); + return ret; + } + } + + return 0; +} + +static int rockchip_pctrl_register(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct pinctrl_desc *ctrldesc = &info->pctl; + struct pinctrl_pin_desc *pindesc, *pdesc; + struct rockchip_pin_bank *pin_bank; + int pin, bank, ret; + int k; + + ctrldesc->name = "rockchip-pinctrl"; + ctrldesc->owner = THIS_MODULE; + ctrldesc->pctlops = &rockchip_pctrl_ops; + ctrldesc->pmxops = &rockchip_pmx_ops; + ctrldesc->confops = &rockchip_pinconf_ops; + + pindesc = devm_kcalloc(&pdev->dev, + info->ctrl->nr_pins, sizeof(*pindesc), + GFP_KERNEL); + if (!pindesc) + return -ENOMEM; + + ctrldesc->pins = pindesc; + ctrldesc->npins = info->ctrl->nr_pins; + + pdesc = pindesc; + for (bank = 0, k = 0; bank < info->ctrl->nr_banks; bank++) { + pin_bank = &info->ctrl->pin_banks[bank]; + for (pin = 0; pin < pin_bank->nr_pins; pin++, k++) { + pdesc->number = k; + pdesc->name = kasprintf(GFP_KERNEL, "%s-%d", + pin_bank->name, pin); + pdesc++; + } + } + + ret = rockchip_pctrl_parse_dt(pdev, info); + if (ret) + return ret; + + info->pctl_dev = devm_pinctrl_register(&pdev->dev, ctrldesc, info); + if (IS_ERR(info->pctl_dev)) { + dev_err(&pdev->dev, "could not register pinctrl driver\n"); + return PTR_ERR(info->pctl_dev); + } + + for (bank = 0; bank < info->ctrl->nr_banks; ++bank) { + pin_bank = &info->ctrl->pin_banks[bank]; + pin_bank->grange.name = pin_bank->name; + pin_bank->grange.id = bank; + pin_bank->grange.pin_base = pin_bank->pin_base; + pin_bank->grange.base = pin_bank->gpio_chip.base; + pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; + pin_bank->grange.gc = &pin_bank->gpio_chip; + pinctrl_add_gpio_range(info->pctl_dev, &pin_bank->grange); + } + + return 0; +} + +/* + * GPIO handling + */ + +static void rockchip_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); + void __iomem *reg = bank->reg_base + GPIO_SWPORT_DR; + unsigned long flags; + u32 data; + + clk_enable(bank->clk); + raw_spin_lock_irqsave(&bank->slock, flags); + + data = readl(reg); + data &= ~BIT(offset); + if (value) + data |= BIT(offset); + writel(data, reg); + + raw_spin_unlock_irqrestore(&bank->slock, flags); + clk_disable(bank->clk); +} + +/* + * Returns the level of the pin for input direction and setting of the DR + * register for output gpios. + */ +static int rockchip_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); + u32 data; + + clk_enable(bank->clk); + data = readl(bank->reg_base + GPIO_EXT_PORT); + clk_disable(bank->clk); + data >>= offset; + data &= 1; + return data; +} + +/* + * gpiolib gpio_direction_input callback function. The setting of the pin + * mux function as 'gpio input' will be handled by the pinctrl subsystem + * interface. + */ +static int rockchip_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + return pinctrl_gpio_direction_input(gc->base + offset); +} + +/* + * gpiolib gpio_direction_output callback function. The setting of the pin + * mux function as 'gpio output' will be handled by the pinctrl subsystem + * interface. + */ +static int rockchip_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + rockchip_gpio_set(gc, offset, value); + return pinctrl_gpio_direction_output(gc->base + offset); +} + +static void rockchip_gpio_set_debounce(struct gpio_chip *gc, + unsigned int offset, bool enable) +{ + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); + void __iomem *reg = bank->reg_base + GPIO_DEBOUNCE; + unsigned long flags; + u32 data; + + clk_enable(bank->clk); + raw_spin_lock_irqsave(&bank->slock, flags); + + data = readl(reg); + if (enable) + data |= BIT(offset); + else + data &= ~BIT(offset); + writel(data, reg); + + raw_spin_unlock_irqrestore(&bank->slock, flags); + clk_disable(bank->clk); +} + +/* + * gpiolib set_config callback function. The setting of the pin + * mux function as 'gpio output' will be handled by the pinctrl subsystem + * interface. + */ +static int rockchip_gpio_set_config(struct gpio_chip *gc, unsigned int offset, + unsigned long config) +{ + enum pin_config_param param = pinconf_to_config_param(config); + + switch (param) { + /* + * Rockchip's gpio could only support up to one period + * of the debounce clock(pclk), which is far away from + * satisftying the requirement, as pclk is usually near + * 100MHz shared by all peripherals. So the fact is it + * has crippled debounce capability could only be useful + * to prevent any spurious glitches from waking up the system + * if the gpio is conguired as wakeup interrupt source. Let's + * still return -ENOTSUPP as before, to make sure the caller + * of gpiod_set_debounce won't change its behaviour. + */ + case PIN_CONFIG_INPUT_DEBOUNCE: + rockchip_gpio_set_debounce(gc, offset, true); + return -ENOTSUPP; + default: + return -ENOTSUPP; + } +} + +/* + * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin + * and a virtual IRQ, if not already present. + */ +static int rockchip_gpio_to_irq(struct gpio_chip *gc, unsigned int offset) +{ + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); + unsigned int virq; + + if (!bank->domain) + return -ENXIO; + + virq = irq_create_mapping(bank->domain, offset); + + return (virq) ? : -ENXIO; +} + +static const struct gpio_chip rockchip_gpiolib_chip = { + .request = gpiochip_generic_request, + .free = gpiochip_generic_free, + .set = rockchip_gpio_set, + .get = rockchip_gpio_get, + .get_direction = rockchip_gpio_get_direction, + .direction_input = rockchip_gpio_direction_input, + .direction_output = rockchip_gpio_direction_output, + .set_config = rockchip_gpio_set_config, + .to_irq = rockchip_gpio_to_irq, + .owner = THIS_MODULE, +}; + +/* + * Interrupt handling + */ + +static void rockchip_irq_demux(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct rockchip_pin_bank *bank = irq_desc_get_handler_data(desc); + u32 pend; + + dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name); + + chained_irq_enter(chip, desc); + + pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS); + + while (pend) { + unsigned int irq, virq; + + irq = __ffs(pend); + pend &= ~BIT(irq); + virq = irq_linear_revmap(bank->domain, irq); + + if (!virq) { + dev_err(bank->drvdata->dev, "unmapped irq %d\n", irq); + continue; + } + + dev_dbg(bank->drvdata->dev, "handling irq %d\n", irq); + + /* + * Triggering IRQ on both rising and falling edge + * needs manual intervention. + */ + if (bank->toggle_edge_mode & BIT(irq)) { + u32 data, data_old, polarity; + unsigned long flags; + + data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT); + do { + raw_spin_lock_irqsave(&bank->slock, flags); + + polarity = readl_relaxed(bank->reg_base + + GPIO_INT_POLARITY); + if (data & BIT(irq)) + polarity &= ~BIT(irq); + else + polarity |= BIT(irq); + writel(polarity, + bank->reg_base + GPIO_INT_POLARITY); + + raw_spin_unlock_irqrestore(&bank->slock, flags); + + data_old = data; + data = readl_relaxed(bank->reg_base + + GPIO_EXT_PORT); + } while ((data & BIT(irq)) != (data_old & BIT(irq))); + } + + generic_handle_irq(virq); + } + + chained_irq_exit(chip, desc); +} + +static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct rockchip_pin_bank *bank = gc->private; + u32 mask = BIT(d->hwirq); + u32 polarity; + u32 level; + u32 data; + unsigned long flags; + int ret; + + /* make sure the pin is configured as gpio input */ + ret = rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO); + if (ret < 0) + return ret; + + clk_enable(bank->clk); + raw_spin_lock_irqsave(&bank->slock, flags); + + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); + data &= ~mask; + writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); + + raw_spin_unlock_irqrestore(&bank->slock, flags); + + if (type & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(d, handle_edge_irq); + else + irq_set_handler_locked(d, handle_level_irq); + + raw_spin_lock_irqsave(&bank->slock, flags); + irq_gc_lock(gc); + + level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL); + polarity = readl_relaxed(gc->reg_base + GPIO_INT_POLARITY); + + switch (type) { + case IRQ_TYPE_EDGE_BOTH: + bank->toggle_edge_mode |= mask; + level |= mask; + + /* + * Determine gpio state. If 1 next interrupt should be falling + * otherwise rising. + */ + data = readl(bank->reg_base + GPIO_EXT_PORT); + if (data & mask) + polarity &= ~mask; + else + polarity |= mask; + break; + case IRQ_TYPE_EDGE_RISING: + bank->toggle_edge_mode &= ~mask; + level |= mask; + polarity |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + bank->toggle_edge_mode &= ~mask; + level |= mask; + polarity &= ~mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + bank->toggle_edge_mode &= ~mask; + level &= ~mask; + polarity |= mask; + break; + case IRQ_TYPE_LEVEL_LOW: + bank->toggle_edge_mode &= ~mask; + level &= ~mask; + polarity &= ~mask; + break; + default: + irq_gc_unlock(gc); + raw_spin_unlock_irqrestore(&bank->slock, flags); + clk_disable(bank->clk); + return -EINVAL; + } + + writel_relaxed(level, gc->reg_base + GPIO_INTTYPE_LEVEL); + writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY); + + irq_gc_unlock(gc); + raw_spin_unlock_irqrestore(&bank->slock, flags); + clk_disable(bank->clk); + + return 0; +} + +static void rockchip_irq_suspend(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct rockchip_pin_bank *bank = gc->private; + + clk_enable(bank->clk); + bank->saved_masks = irq_reg_readl(gc, GPIO_INTMASK); + irq_reg_writel(gc, ~gc->wake_active, GPIO_INTMASK); + clk_disable(bank->clk); +} + +static void rockchip_irq_resume(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct rockchip_pin_bank *bank = gc->private; + + clk_enable(bank->clk); + irq_reg_writel(gc, bank->saved_masks, GPIO_INTMASK); + clk_disable(bank->clk); +} + +static void rockchip_irq_enable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct rockchip_pin_bank *bank = gc->private; + + clk_enable(bank->clk); + irq_gc_mask_clr_bit(d); +} + +static void rockchip_irq_disable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct rockchip_pin_bank *bank = gc->private; + + irq_gc_mask_set_bit(d); + clk_disable(bank->clk); +} + +static int rockchip_interrupts_register(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct rockchip_pin_bank *bank = ctrl->pin_banks; + unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; + struct irq_chip_generic *gc; + int ret; + int i, j; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!bank->valid) { + dev_warn(&pdev->dev, "bank %s is not valid\n", + bank->name); + continue; + } + + ret = clk_enable(bank->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock for bank %s\n", + bank->name); + continue; + } + + bank->domain = irq_domain_add_linear(bank->of_node, 32, + &irq_generic_chip_ops, + NULL); + if (!bank->domain) { + dev_warn(&pdev->dev, "could not initialize irq domain for bank %s\n", + bank->name); + clk_disable(bank->clk); + continue; + } + + ret = irq_alloc_domain_generic_chips(bank->domain, 32, 1, + "rockchip_gpio_irq", + handle_level_irq, + clr, 0, + IRQ_GC_INIT_MASK_CACHE); + if (ret) { + dev_err(&pdev->dev, "could not alloc generic chips for bank %s\n", + bank->name); + irq_domain_remove(bank->domain); + clk_disable(bank->clk); + continue; + } + + /* + * Linux assumes that all interrupts start out disabled/masked. + * Our driver only uses the concept of masked and always keeps + * things enabled, so for us that's all masked and all enabled. + */ + writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTMASK); + writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTEN); + + gc = irq_get_domain_generic_chip(bank->domain, 0); + gc->reg_base = bank->reg_base; + gc->private = bank; + gc->chip_types[0].regs.mask = GPIO_INTMASK; + gc->chip_types[0].regs.ack = GPIO_PORTS_EOI; + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; + gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit; + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit; + gc->chip_types[0].chip.irq_enable = rockchip_irq_enable; + gc->chip_types[0].chip.irq_disable = rockchip_irq_disable; + gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; + gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; + gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; + gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type; + gc->wake_enabled = IRQ_MSK(bank->nr_pins); + + irq_set_chained_handler_and_data(bank->irq, + rockchip_irq_demux, bank); + + /* map the gpio irqs here, when the clock is still running */ + for (j = 0 ; j < 32 ; j++) + irq_create_mapping(bank->domain, j); + + clk_disable(bank->clk); + } + + return 0; +} + +static int rockchip_gpiolib_register(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct rockchip_pin_bank *bank = ctrl->pin_banks; + struct gpio_chip *gc; + int ret; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!bank->valid) { + dev_warn(&pdev->dev, "bank %s is not valid\n", + bank->name); + continue; + } + + bank->gpio_chip = rockchip_gpiolib_chip; + + gc = &bank->gpio_chip; + gc->base = bank->pin_base; + gc->ngpio = bank->nr_pins; + gc->parent = &pdev->dev; + gc->of_node = bank->of_node; + gc->label = bank->name; + + ret = gpiochip_add_data(gc, bank); + if (ret) { + dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", + gc->label, ret); + goto fail; + } + } + + rockchip_interrupts_register(pdev, info); + + return 0; + +fail: + for (--i, --bank; i >= 0; --i, --bank) { + if (!bank->valid) + continue; + gpiochip_remove(&bank->gpio_chip); + } + return ret; +} + +static int rockchip_pctrl_get_bank_data(struct rockchip_pin_bank *bank, + struct rockchip_pinctrl *info) +{ + struct resource res; + void __iomem *base; + + if (of_address_to_resource(bank->of_node, 0, &res)) { + dev_err(info->dev, "cannot find IO resource for bank\n"); + return -ENOENT; + } + + bank->reg_base = devm_ioremap_resource(info->dev, &res); + if (IS_ERR(bank->reg_base)) + return PTR_ERR(bank->reg_base); + + /* + * special case, where parts of the pull setting-registers are + * part of the PMU register space + */ + if (of_device_is_compatible(bank->of_node, + "rockchip,rk3188-gpio-bank0")) { + struct device_node *node; + + node = of_parse_phandle(bank->of_node->parent, + "rockchip,pmu", 0); + if (!node) { + if (of_address_to_resource(bank->of_node, 1, &res)) { + dev_err(info->dev, "cannot find IO resource for bank\n"); + return -ENOENT; + } + + base = devm_ioremap_resource(info->dev, &res); + if (IS_ERR(base)) + return PTR_ERR(base); + rockchip_regmap_config.max_register = + resource_size(&res) - 4; + rockchip_regmap_config.name = + "rockchip,rk3188-gpio-bank0-pull"; + bank->regmap_pull = + devm_regmap_init_mmio(info->dev, + base, + &rockchip_regmap_config); + } + of_node_put(node); + } + + bank->irq = irq_of_parse_and_map(bank->of_node, 0); + + bank->clk = of_clk_get(bank->of_node, 0); + if (IS_ERR(bank->clk)) + return PTR_ERR(bank->clk); + + return clk_prepare(bank->clk); +} + +/* retrieve the soc specific data */ +static int rockchip_pctrl_get_soc_data(struct platform_device *pdev) +{ + struct rockchip_pinctrl *d = platform_get_drvdata(pdev); + struct rockchip_pin_ctrl *ctrl = d->ctrl; + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + struct rockchip_pin_bank *bank; + int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j; + + for_each_child_of_node(np, child) { + if (!of_find_property(child, "gpio-controller", NULL)) + continue; + + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!strcmp(bank->name, child->name)) { + bank->of_node = child; + + if (!rockchip_pctrl_get_bank_data(bank, d)) + bank->valid = true; + + break; + } + } + } + + grf_offs = ctrl->grf_mux_offset; + pmu_offs = ctrl->pmu_mux_offset; + drv_pmu_offs = ctrl->pmu_drv_offset; + drv_grf_offs = ctrl->grf_drv_offset; + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + int bank_pins = 0; + + raw_spin_lock_init(&bank->slock); + bank->drvdata = d; + bank->pin_base = ctrl->nr_pins; + ctrl->nr_pins += bank->nr_pins; + + /* calculate iomux and drv offsets */ + for (j = 0; j < 4; j++) { + struct rockchip_iomux *iom = &bank->iomux[j]; + struct rockchip_drv *drv = &bank->drv[j]; + int inc; + + if (bank_pins >= bank->nr_pins) + break; + + /* preset iomux offset value, set new start value */ + if (iom->offset >= 0) { + if (iom->type & IOMUX_SOURCE_PMU) + pmu_offs = iom->offset; + else + grf_offs = iom->offset; + } else { /* set current iomux offset */ + iom->offset = (iom->type & IOMUX_SOURCE_PMU) ? + pmu_offs : grf_offs; + } + + /* preset drv offset value, set new start value */ + if (drv->offset >= 0) { + if (iom->type & IOMUX_SOURCE_PMU) + drv_pmu_offs = drv->offset; + else + drv_grf_offs = drv->offset; + } else { /* set current drv offset */ + drv->offset = (iom->type & IOMUX_SOURCE_PMU) ? + drv_pmu_offs : drv_grf_offs; + } + + dev_dbg(d->dev, "bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n", + i, j, iom->offset, drv->offset); + + /* + * Increase offset according to iomux width. + * 4bit iomux'es are spread over two registers. + */ + inc = (iom->type & (IOMUX_WIDTH_4BIT | + IOMUX_WIDTH_3BIT | + IOMUX_WIDTH_2BIT)) ? 8 : 4; + if (iom->type & IOMUX_SOURCE_PMU) + pmu_offs += inc; + else + grf_offs += inc; + + /* + * Increase offset according to drv width. + * 3bit drive-strength'es are spread over two registers. + */ + if (drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO || + drv->drv_type == DRV_TYPE_IO_3V3_ONLY) + inc = 8; + else + inc = 4; + + if (iom->type & IOMUX_SOURCE_PMU) + drv_pmu_offs += inc; + else + drv_grf_offs += inc; + + bank_pins += 8; + } + + /* calculate the per-bank recalced_mask */ + for (j = 0; j < ctrl->niomux_recalced; j++) { + int pin = 0; + + if (ctrl->iomux_recalced[j].num == bank->bank_num) { + pin = ctrl->iomux_recalced[j].pin; + bank->recalced_mask |= BIT(pin); + } + } + + /* calculate the per-bank route_mask */ + for (j = 0; j < ctrl->niomux_routes; j++) { + int pin = 0; + + if (ctrl->iomux_routes[j].bank_num == bank->bank_num) { + pin = ctrl->iomux_routes[j].pin; + bank->route_mask |= BIT(pin); + } + } + } + + return 0; +} + +static int rockchip_pctrl_suspend(struct device *dev) +{ + struct rockchip_pinctrl *info = dev_get_drvdata(dev); + + if (!info) + return -EINVAL; + + return pinctrl_force_sleep(info->pctl_dev); +} + +static int rockchip_pctrl_resume(struct device *dev) +{ + struct rockchip_pinctrl *info = dev_get_drvdata(dev); + + if (!info) + return -EINVAL; + + return pinctrl_force_default(info->pctl_dev); +} + +SIMPLE_DEV_PM_OPS(rockchip_pctrl_dev_pm_ops, + rockchip_pctrl_suspend, + rockchip_pctrl_resume); + +int rockchip_pctrl_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *child; + const struct of_device_id *match; + struct device *dev = &pdev->dev; + struct rockchip_pinctrl *info; + int ret; + + if (!np) + return -EINVAL; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) + return -EINVAL; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = dev; + info->ctrl = (struct rockchip_pin_ctrl *)match->data; + + platform_set_drvdata(pdev, info); + + ret = rockchip_pctrl_get_soc_data(pdev); + if (ret) { + dev_err(dev, "driver data not available\n"); + return -EINVAL; + } + + child = of_parse_phandle(np, "rockchip,grf", 0); + if (child) { + info->regmap_base = syscon_node_to_regmap(child); + if (IS_ERR(info->regmap_base)) + return PTR_ERR(info->regmap_base); + } + + child = of_parse_phandle(np, "rockchip,pmu", 0); + if (child) { + info->regmap_pmu = syscon_node_to_regmap(child); + if (IS_ERR(info->regmap_pmu)) + return PTR_ERR(info->regmap_pmu); + } + + ret = rockchip_pctrl_register(pdev, info); + if (ret) + return ret; + + ret = rockchip_gpiolib_register(pdev, info); + if (ret) + return ret; + + return 0; +} + diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip.h b/drivers/pinctrl/rockchip/pinctrl-rockchip.h new file mode 100644 index 000000000000..cbf6958206cd --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip.h @@ -0,0 +1,387 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#ifndef __PINCTRL_ROCKCHIP_H__ +#define __PINCTRL_ROCKCHIP_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../core.h" +#include "../pinconf.h" + +enum rockchip_pinctrl_type { + PX30, + RV1108, + RK2928, + RK3066B, + RK3128, + RK3188, + RK3288, + RK3308, + RK3368, + RK3399, +}; + +/** + * Encode variants of iomux registers into a type variable + */ +#define IOMUX_GPIO_ONLY BIT(0) +#define IOMUX_WIDTH_4BIT BIT(1) +#define IOMUX_SOURCE_PMU BIT(2) +#define IOMUX_UNROUTED BIT(3) +#define IOMUX_WIDTH_3BIT BIT(4) +#define IOMUX_WIDTH_2BIT BIT(5) + +/** + * @type: iomux variant using IOMUX_* constants + * @offset: if initialized to -1 it will be autocalculated, by specifying + * an initial offset value the relevant source offset can be reset + * to a new value for autocalculating the following iomux registers. + */ +struct rockchip_iomux { + int type; + int offset; +}; + +/** + * enum type index corresponding to rockchip_perpin_drv_list arrays index. + */ +enum rockchip_pin_drv_type { + DRV_TYPE_IO_DEFAULT = 0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_3V0_AUTO, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_MAX +}; + +/** + * enum type index corresponding to rockchip_pull_list arrays index. + */ +enum rockchip_pin_pull_type { + PULL_TYPE_IO_DEFAULT = 0, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_MAX +}; + +/** + * @drv_type: drive strength variant using rockchip_perpin_drv_type + * @offset: if initialized to -1 it will be autocalculated, by specifying + * an initial offset value the relevant source offset can be reset + * to a new value for autocalculating the following drive strength + * registers. if used chips own cal_drv func instead to calculate + * registers offset, the variant could be ignored. + */ +struct rockchip_drv { + enum rockchip_pin_drv_type drv_type; + int offset; +}; + +/** + * @reg_base: register base of the gpio bank + * @reg_pull: optional separate register for additional pull settings + * @clk: clock of the gpio bank + * @irq: interrupt of the gpio bank + * @saved_masks: Saved content of GPIO_INTEN at suspend time. + * @pin_base: first pin number + * @nr_pins: number of pins in this bank + * @name: name of the bank + * @bank_num: number of the bank, to account for holes + * @iomux: array describing the 4 iomux sources of the bank + * @drv: array describing the 4 drive strength sources of the bank + * @pull_type: array describing the 4 pull type sources of the bank + * @valid: is all necessary information present + * @of_node: dt node of this bank + * @drvdata: common pinctrl basedata + * @domain: irqdomain of the gpio bank + * @gpio_chip: gpiolib chip + * @grange: gpio range + * @slock: spinlock for the gpio bank + * @route_mask: bits describing the routing pins of per bank + */ +struct rockchip_pin_bank { + void __iomem *reg_base; + struct regmap *regmap_pull; + struct clk *clk; + int irq; + u32 saved_masks; + u32 pin_base; + u8 nr_pins; + char *name; + u8 bank_num; + struct rockchip_iomux iomux[4]; + struct rockchip_drv drv[4]; + enum rockchip_pin_pull_type pull_type[4]; + bool valid; + struct device_node *of_node; + struct rockchip_pinctrl *drvdata; + struct irq_domain *domain; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range grange; + raw_spinlock_t slock; + u32 toggle_edge_mode; + u32 recalced_mask; + u32 route_mask; +}; + +#define PIN_BANK(id, pins, label) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ + } + +#define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ + }, \ + } + +#define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = type0, .offset = -1 }, \ + { .drv_type = type1, .offset = -1 }, \ + { .drv_type = type2, .offset = -1 }, \ + { .drv_type = type3, .offset = -1 }, \ + }, \ + } + +#define PIN_BANK_DRV_FLAGS_PULL_FLAGS(id, pins, label, drv0, drv1, \ + drv2, drv3, pull0, pull1, \ + pull2, pull3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = drv0, .offset = -1 }, \ + { .drv_type = drv1, .offset = -1 }, \ + { .drv_type = drv2, .offset = -1 }, \ + { .drv_type = drv3, .offset = -1 }, \ + }, \ + .pull_type[0] = pull0, \ + .pull_type[1] = pull1, \ + .pull_type[2] = pull2, \ + .pull_type[3] = pull3, \ + } + +#define PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(id, pins, label, iom0, iom1, \ + iom2, iom3, drv0, drv1, drv2, \ + drv3, offset0, offset1, \ + offset2, offset3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = drv0, .offset = offset0 }, \ + { .drv_type = drv1, .offset = offset1 }, \ + { .drv_type = drv2, .offset = offset2 }, \ + { .drv_type = drv3, .offset = offset3 }, \ + }, \ + } + +#define PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(id, pins, \ + label, iom0, iom1, iom2, \ + iom3, drv0, drv1, drv2, \ + drv3, offset0, offset1, \ + offset2, offset3, pull0, \ + pull1, pull2, pull3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = drv0, .offset = offset0 }, \ + { .drv_type = drv1, .offset = offset1 }, \ + { .drv_type = drv2, .offset = offset2 }, \ + { .drv_type = drv3, .offset = offset3 }, \ + }, \ + .pull_type[0] = pull0, \ + .pull_type[1] = pull1, \ + .pull_type[2] = pull2, \ + .pull_type[3] = pull3, \ + } + +/** + * struct rockchip_mux_recalced_data: represent a pin iomux data. + * @num: bank number. + * @pin: pin number. + * @bit: index at register. + * @reg: register offset. + * @mask: mask bit + */ +struct rockchip_mux_recalced_data { + u8 num; + u8 pin; + u32 reg; + u8 bit; + u8 mask; +}; + +enum rockchip_mux_route_location { + ROCKCHIP_ROUTE_SAME = 0, + ROCKCHIP_ROUTE_PMU, + ROCKCHIP_ROUTE_GRF, +}; + +/** + * struct rockchip_mux_recalced_data: represent a pin iomux data. + * @bank_num: bank number. + * @pin: index at register or used to calc index. + * @func: the min pin. + * @route_offset: the max pin. + * @route_val: the register offset. + */ +struct rockchip_mux_route_data { + u8 bank_num; + u8 pin; + u8 func; + enum rockchip_mux_route_location route_location; + u32 route_offset; + u32 route_val; +}; + +/** + */ +struct rockchip_pin_ctrl { + struct rockchip_pin_bank *pin_banks; + u32 nr_banks; + u32 nr_pins; + char *label; + enum rockchip_pinctrl_type type; + int grf_mux_offset; + int pmu_mux_offset; + int grf_drv_offset; + int pmu_drv_offset; + struct rockchip_mux_recalced_data *iomux_recalced; + u32 niomux_recalced; + struct rockchip_mux_route_data *iomux_routes; + u32 niomux_routes; + + void (*pull_calc_reg)(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit); + void (*drv_calc_reg)(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit); + int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit); +}; + +struct rockchip_pin_config { + unsigned int func; + unsigned long *configs; + unsigned int nconfigs; +}; + +/** + * struct rockchip_pin_group: represent group of pins of a pinmux function. + * @name: name of the pin group, used to lookup the group. + * @pins: the pins included in this group. + * @npins: number of pins included in this group. + * @func: the mux function number to be programmed when selected. + * @configs: the config values to be set for each pin + * @nconfigs: number of configs for each pin + */ +struct rockchip_pin_group { + const char *name; + unsigned int npins; + unsigned int *pins; + struct rockchip_pin_config *data; +}; + +/** + * struct rockchip_pmx_func: represent a pin function. + * @name: name of the pin function, used to lookup the function. + * @groups: one or more names of pin groups that provide this function. + * @num_groups: number of groups included in @groups. + */ +struct rockchip_pmx_func { + const char *name; + const char **groups; + u8 ngroups; +}; + +struct rockchip_pinctrl { + struct regmap *regmap_base; + int reg_size; + struct regmap *regmap_pull; + struct regmap *regmap_pmu; + struct device *dev; + struct rockchip_pin_ctrl *ctrl; + struct pinctrl_desc pctl; + struct pinctrl_dev *pctl_dev; + struct rockchip_pin_group *groups; + unsigned int ngroups; + struct rockchip_pmx_func *functions; + unsigned int nfunctions; +}; + +extern const struct dev_pm_ops rockchip_pctrl_dev_pm_ops; + +int rockchip_pctrl_probe(struct platform_device *pdev); + +#endif diff --git a/drivers/pinctrl/rockchip/pinctrl-rv1108.c b/drivers/pinctrl/rockchip/pinctrl-rv1108.c new file mode 100644 index 000000000000..947b65db860b --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rv1108.c @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RV1108_PULL_PMU_OFFSET 0x10 +#define RV1108_PULL_OFFSET 0x110 +#define RV1108_PULL_PINS_PER_REG 8 +#define RV1108_PULL_BITS_PER_PIN 2 +#define RV1108_PULL_BANK_STRIDE 16 + +#define RV1108_DRV_PMU_OFFSET 0x20 +#define RV1108_DRV_GRF_OFFSET 0x210 +#define RV1108_DRV_BITS_PER_PIN 2 +#define RV1108_DRV_PINS_PER_REG 8 +#define RV1108_DRV_BANK_STRIDE 16 + +#define RV1108_SCHMITT_PMU_OFFSET 0x30 +#define RV1108_SCHMITT_GRF_OFFSET 0x388 +#define RV1108_SCHMITT_BANK_STRIDE 8 +#define RV1108_SCHMITT_PINS_PER_GRF_REG 16 +#define RV1108_SCHMITT_PINS_PER_PMU_REG 8 + +static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = { + { + .num = 1, + .pin = 0, + .reg = 0x418, + .bit = 0, + .mask = 0x3 + }, { + .num = 1, + .pin = 1, + .reg = 0x418, + .bit = 2, + .mask = 0x3 + }, { + .num = 1, + .pin = 2, + .reg = 0x418, + .bit = 4, + .mask = 0x3 + }, { + .num = 1, + .pin = 3, + .reg = 0x418, + .bit = 6, + .mask = 0x3 + }, { + .num = 1, + .pin = 4, + .reg = 0x418, + .bit = 8, + .mask = 0x3 + }, { + .num = 1, + .pin = 5, + .reg = 0x418, + .bit = 10, + .mask = 0x3 + }, { + .num = 1, + .pin = 6, + .reg = 0x418, + .bit = 12, + .mask = 0x3 + }, { + .num = 1, + .pin = 7, + .reg = 0x418, + .bit = 14, + .mask = 0x3 + }, { + .num = 1, + .pin = 8, + .reg = 0x41c, + .bit = 0, + .mask = 0x3 + }, { + .num = 1, + .pin = 9, + .reg = 0x41c, + .bit = 2, + .mask = 0x3 + }, +}; + +static void rv1108_calc_pull(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = RV1108_PULL_PMU_OFFSET; + } else { + *reg = RV1108_PULL_OFFSET; + *regmap = info->regmap_base; + /* correct the offset, as we're starting with the secnod bank */ + *reg -= 0x10; + *reg += bank->bank_num * RV1108_PULL_BANK_STRIDE; + } + + *reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4); + *bit = (pin_num % RV1108_PULL_PINS_PER_REG); + *bit *= RV1108_PULL_BITS_PER_PIN; +} + +static void rv1108_calc_drv(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = RV1108_DRV_PMU_OFFSET; + } else { + *regmap = info->regmap_base; + *reg = RV1108_DRV_GRF_OFFSET; + + /* correct the offset, as we're starting with the second bank */ + *reg -= 0x10; + *reg += bank->bank_num * RV1108_DRV_BANK_STRIDE; + } + + *reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4); + *bit = pin_num % RV1108_DRV_PINS_PER_REG; + *bit *= RV1108_DRV_BITS_PER_PIN; +} + +static int rv1108_calc_schmitt(struct rockchip_pin_bank *bank, + int pin_num, + struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl *info = bank->drvdata; + int pins_per_reg; + + if (bank->bank_num == 0) { + *regmap = info->regmap_pmu; + *reg = RV1108_SCHMITT_PMU_OFFSET; + pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG; + } else { + *regmap = info->regmap_base; + *reg = RV1108_SCHMITT_GRF_OFFSET; + pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG; + *reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE; + } + *reg += ((pin_num / pins_per_reg) * 4); + *bit = pin_num % pins_per_reg; + + return 0; +} + +static struct rockchip_pin_bank rv1108_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0), +}; + +static struct rockchip_pin_ctrl rv1108_pin_ctrl = { + .pin_banks = rv1108_pin_banks, + .nr_banks = ARRAY_SIZE(rv1108_pin_banks), + .label = "RV1108-GPIO", + .type = RV1108, + .grf_mux_offset = 0x10, + .pmu_mux_offset = 0x0, + .iomux_recalced = rv1108_mux_recalced_data, + .niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data), + .pull_calc_reg = rv1108_calc_pull, + .drv_calc_reg = rv1108_calc_drv, + .schmitt_calc_reg = rv1108_calc_schmitt, +}; + +static const struct of_device_id rv1108_pinctrl_dt_match[] = { + { .compatible = "rockchip,rv1108-pinctrl", + .data = &rv1108_pin_ctrl }, + {}, +}; + +static struct platform_driver rv1108_pinctrl_driver = { + .probe = rockchip_pctrl_probe, + .driver = { + .name = "rv1108-pinctrl", + .pm = &rockchip_pctrl_dev_pm_ops, + .of_match_table = rv1108_pinctrl_dt_match, + }, +}; + +static int __init rv1108_pinctrl_init(void) +{ + return platform_driver_register(&rv1108_pinctrl_driver); +} +postcore_initcall(rv1108_pinctrl_init); + +MODULE_DESCRIPTION("RV1108 pin control and GPIO driver"); +MODULE_AUTHOR("Jianqun Xu "); +MODULE_LICENSE("GPL v2"); -- 2.17.1