Received: by 2002:a25:8b91:0:0:0:0:0 with SMTP id j17csp7609776ybl; Thu, 16 Jan 2020 02:35:25 -0800 (PST) X-Google-Smtp-Source: APXvYqziX01dICg09kJN164JlN7ifsogHMX1YeaI/svmVavneQxStqg7iwE9WvxP2WmORM+ONBOB X-Received: by 2002:a9d:4b05:: with SMTP id q5mr1362177otf.174.1579170925490; Thu, 16 Jan 2020 02:35:25 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1579170925; cv=none; d=google.com; s=arc-20160816; b=oi88+/n5WwOTWfQAAhhJxZwFzUqYErE1gCcR9KSKNoAAGq3cEqKcomAoiC/xocXJ0I zcM28Eq9WUsMQbsEdF36ClNKtfu1bMkb4zcO154bE4CYLBAAbaELF9Wv2plZXqRylSo8 oiHmrI7h+qUbojnfZOltANvxFKOtUhA5ZceGSrebk/uULSov1VfLR08RVohruZSANjvU AtvwnzaplKnB9tPek8Bog+Q2OtFCLBMPLfI02HoqzsdcZPqjGN7wJGNdIhx9fdeTgTLj Nue4OAG79PvTHpvb8q4gRONu9/4miCYcq4mEP88an6VInlBYsc8GjLAas/CDXJxHOVbm cvwg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding :content-language:in-reply-to:mime-version:user-agent:date :message-id:from:references:cc:to:subject; bh=hl3ntVgdoT4gkSJLjzAIC4c98zpD2se8qbI6jtC09Ss=; b=0+w0rjSa0ohWCJDH0qVPhj0879U/RKznZ73ULy1WHZyTKAbT87NbQ0T7dA//Q+EO9e sw28Ze8qn0IDoHxaVB/jOmgsJcvetY/9ylkX43sZfWs15TyNh4woq8rWeo50+l5U5KQn lio9N3tU3xq7rFuscL3sEg3n27YAP6AiYT54xEpifzXcsq2/BMtJzPG4HNetkwjHOXWF yRUpBaTpR33XwfJfNAPTA/u3HfLFdEJIrlYtZo6sNUOckn5hBfY3Lv8Sq/8BxmEf9Okq cxvbNIbWpB5Adb9uM04DwlAlw5kofQC4ehjUD5PzsnZlJ34BvyUaJeMhS6kr95XshjvE lNHA== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id v25si10628899ote.90.2020.01.16.02.35.12; Thu, 16 Jan 2020 02:35:25 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726100AbgAPKeO (ORCPT + 99 others); Thu, 16 Jan 2020 05:34:14 -0500 Received: from foss.arm.com ([217.140.110.172]:47700 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725800AbgAPKeN (ORCPT ); Thu, 16 Jan 2020 05:34:13 -0500 Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id ED87B31B; Thu, 16 Jan 2020 02:34:06 -0800 (PST) Received: from [192.168.1.123] (unknown [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 97B993F534; Thu, 16 Jan 2020 02:34:04 -0800 (PST) Subject: Re: [PATCH v3 RESEND] pinctrl: rockchip: split rockchip pinctrl driver by SoC type To: Jianqun Xu , linus.walleij@linaro.org, heiko@sntech.de, david.wu@rock-chips.com, kever.yang@rock-chips.com Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org References: <20200116074738.14144-1-jay.xu@rock-chips.com> From: Robin Murphy Message-ID: Date: Thu, 16 Jan 2020 10:34:06 +0000 User-Agent: Mozilla/5.0 (Windows NT 10.0; rv:68.0) Gecko/20100101 Thunderbird/68.3.1 MIME-Version: 1.0 In-Reply-To: <20200116074738.14144-1-jay.xu@rock-chips.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Language: en-GB Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 2020-01-16 7:47 am, Jianqun Xu wrote: > The pinctrl-rockchip driver grows larger by adding support for > each new SoC, that make the kernel Image size too large since > it only under one config named PINCTRL_ROCKCHIP. > > This patch split driver in the form of core driver + soc driver, > - pinctrl-rockchip.c defined an platform probe register function > - pinctrl-rkxxxx.c init module by matching compatible name > > For rockchip_defconfig, it needs to select all PINCTRL_RKxxxx to > keep same with old driver. > > For some special defconfig, it can only select one PINCTRL_RKxxxx. > > Reviewed-by: Kever Yang > Signed-off-by: Jianqun Xu > --- > changes since v2: > - remove rockchip_pinctrl_remove > - rename rockchip_pinctrl_* to rockchip_pctrl_* > - redule arguments for get_soc_data > - add module author for each new driver files > - add copyright for new driver files > > changes since v1: > - add rockchip_pinctrl_remove > - remove unused head files in pinctrl-rockchip.h > > drivers/pinctrl/Kconfig | 8 +- > drivers/pinctrl/Makefile | 2 +- > drivers/pinctrl/rockchip/Kconfig | 126 ++ > drivers/pinctrl/rockchip/Makefile | 16 + > drivers/pinctrl/rockchip/pinctrl-px30.c | 224 ++ > drivers/pinctrl/rockchip/pinctrl-rk2928.c | 70 + > drivers/pinctrl/rockchip/pinctrl-rk3036.c | 69 + > drivers/pinctrl/rockchip/pinctrl-rk3066a.c | 72 + > drivers/pinctrl/rockchip/pinctrl-rk3066b.c | 51 + > drivers/pinctrl/rockchip/pinctrl-rk3128.c | 161 ++ > drivers/pinctrl/rockchip/pinctrl-rk3188.c | 147 ++ > drivers/pinctrl/rockchip/pinctrl-rk3228.c | 225 ++ > drivers/pinctrl/rockchip/pinctrl-rk3288.c | 210 ++ > drivers/pinctrl/rockchip/pinctrl-rk3308.c | 420 ++++ > drivers/pinctrl/rockchip/pinctrl-rk3328.c | 272 +++ > drivers/pinctrl/rockchip/pinctrl-rk3368.c | 125 ++ > drivers/pinctrl/rockchip/pinctrl-rk3399.c | 195 ++ > drivers/pinctrl/rockchip/pinctrl-rockchip.c | 2043 +++++++++++++++++++ > drivers/pinctrl/rockchip/pinctrl-rockchip.h | 387 ++++ > drivers/pinctrl/rockchip/pinctrl-rv1108.c | 214 ++ > 20 files changed, 5029 insertions(+), 8 deletions(-) > create mode 100644 drivers/pinctrl/rockchip/Kconfig > create mode 100644 drivers/pinctrl/rockchip/Makefile > create mode 100644 drivers/pinctrl/rockchip/pinctrl-px30.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk2928.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3036.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3066a.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3066b.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3128.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3188.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3228.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3288.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3308.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3328.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3368.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3399.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rockchip.c > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rockchip.h > create mode 100644 drivers/pinctrl/rockchip/pinctrl-rv1108.c Hmm, it looks like you're still leaving behind the old file as entirely dead code, which doesn't seem particularly good. FWIW, a nice way to make a change like this easy to review is to have an initial patch that just moves the existing C file and config/build stuff to the new subdirectory (use `git format-patch -M ...`), then one or more further patches on top to split out the individual SoC options. That way the diffs stay small and reviewers don't have to read the patch side-by-side with the original file to confirm that the "new" code really is identical to what was there before. Robin. > diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig > index 3bfbf2ff6e2b..17ce48220795 100644 > --- a/drivers/pinctrl/Kconfig > +++ b/drivers/pinctrl/Kconfig > @@ -186,13 +186,6 @@ config PINCTRL_OXNAS > select GPIOLIB_IRQCHIP > select MFD_SYSCON > > -config PINCTRL_ROCKCHIP > - bool > - select PINMUX > - select GENERIC_PINCONF > - select GENERIC_IRQ_CHIP > - select MFD_SYSCON > - > config PINCTRL_RZA1 > bool "Renesas RZ/A1 gpio and pinctrl driver" > depends on OF > @@ -395,6 +388,7 @@ source "drivers/pinctrl/nomadik/Kconfig" > source "drivers/pinctrl/nuvoton/Kconfig" > source "drivers/pinctrl/pxa/Kconfig" > source "drivers/pinctrl/qcom/Kconfig" > +source "drivers/pinctrl/rockchip/Kconfig" > source "drivers/pinctrl/samsung/Kconfig" > source "drivers/pinctrl/sh-pfc/Kconfig" > source "drivers/pinctrl/spear/Kconfig" > diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile > index 879f312bfb75..262d1a515c10 100644 > --- a/drivers/pinctrl/Makefile > +++ b/drivers/pinctrl/Makefile > @@ -26,7 +26,6 @@ obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o > obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o > obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o > obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o > -obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o > obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o > obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o > obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o > @@ -59,6 +58,7 @@ obj-y += nomadik/ > obj-$(CONFIG_ARCH_NPCM7XX) += nuvoton/ > obj-$(CONFIG_PINCTRL_PXA) += pxa/ > obj-$(CONFIG_ARCH_QCOM) += qcom/ > +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ > obj-$(CONFIG_PINCTRL_SAMSUNG) += samsung/ > obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc/ > obj-$(CONFIG_PINCTRL_SPEAR) += spear/ > diff --git a/drivers/pinctrl/rockchip/Kconfig b/drivers/pinctrl/rockchip/Kconfig > new file mode 100644 > index 000000000000..4873a05108f8 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/Kconfig > @@ -0,0 +1,126 @@ > +# SPDX-License-Identifier: GPL-2.0 > + > +if (ARCH_ROCKCHIP || COMPILE_TEST) > + > +config PINCTRL_ROCKCHIP > + bool > + select PINMUX > + select PINCONF > + select GENERIC_PINCONF > + select GPIOLIB_IRQCHIP > + select GENERIC_IRQ_CHIP > + select MFD_SYSCON > + > +config PINCTRL_PX30 > + tristate "PX30 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK2928 > + tristate "RK2928 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3036 > + tristate "RK3036 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3066A > + tristate "RK3066A pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3066B > + tristate "RK3066B pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3128 > + tristate "RK3128 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3188 > + tristate "RK3188 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3228 > + tristate "RK3228 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3288 > + tristate "RK3288 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3308 > + tristate "RK3308 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3328 > + tristate "RK3328 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3368 > + tristate "RK3368 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RK3399 > + tristate "RK3399 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +config PINCTRL_RV1108 > + tristate "RV1108 pin controller driver" > + depends on GPIOLIB && OF > + select PINCTRL_ROCKCHIP > + help > + This is the pinctrl, pinmux, pinconf and gpiolib driver for the > + SoCs on Rockchip platform. > + > +endif > diff --git a/drivers/pinctrl/rockchip/Makefile b/drivers/pinctrl/rockchip/Makefile > new file mode 100644 > index 000000000000..a250b60631f5 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/Makefile > @@ -0,0 +1,16 @@ > +# SPDX-License-Identifier: GPL-2.0 > +obj-$(CONFIG_PINCTRL_PX30) += pinctrl-px30.o > +obj-$(CONFIG_PINCTRL_RK2928) += pinctrl-rk2928.o > +obj-$(CONFIG_PINCTRL_RK3036) += pinctrl-rk3036.o > +obj-$(CONFIG_PINCTRL_RK3066A) += pinctrl-rk3066a.o > +obj-$(CONFIG_PINCTRL_RK3066B) += pinctrl-rk3066b.o > +obj-$(CONFIG_PINCTRL_RK3128) += pinctrl-rk3128.o > +obj-$(CONFIG_PINCTRL_RK3188) += pinctrl-rk3188.o > +obj-$(CONFIG_PINCTRL_RK3228) += pinctrl-rk3228.o > +obj-$(CONFIG_PINCTRL_RK3288) += pinctrl-rk3288.o > +obj-$(CONFIG_PINCTRL_RK3308) += pinctrl-rk3308.o > +obj-$(CONFIG_PINCTRL_RK3328) += pinctrl-rk3328.o > +obj-$(CONFIG_PINCTRL_RK3368) += pinctrl-rk3368.o > +obj-$(CONFIG_PINCTRL_RK3399) += pinctrl-rk3399.o > +obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o > +obj-$(CONFIG_PINCTRL_RV1108) += pinctrl-rv1108.o > diff --git a/drivers/pinctrl/rockchip/pinctrl-px30.c b/drivers/pinctrl/rockchip/pinctrl-px30.c > new file mode 100644 > index 000000000000..d92563cdf957 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-px30.c > @@ -0,0 +1,224 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define PX30_PULL_PMU_OFFSET 0x10 > +#define PX30_PULL_GRF_OFFSET 0x60 > +#define PX30_PULL_BITS_PER_PIN 2 > +#define PX30_PULL_PINS_PER_REG 8 > +#define PX30_PULL_BANK_STRIDE 16 > + > +#define PX30_DRV_PMU_OFFSET 0x20 > +#define PX30_DRV_GRF_OFFSET 0xf0 > +#define PX30_DRV_BITS_PER_PIN 2 > +#define PX30_DRV_PINS_PER_REG 8 > +#define PX30_DRV_BANK_STRIDE 16 > + > +#define PX30_SCHMITT_PMU_OFFSET 0x38 > +#define PX30_SCHMITT_GRF_OFFSET 0xc0 > +#define PX30_SCHMITT_PINS_PER_PMU_REG 16 > +#define PX30_SCHMITT_BANK_STRIDE 16 > +#define PX30_SCHMITT_PINS_PER_GRF_REG 8 > + > +static struct rockchip_mux_route_data px30_mux_route_data[] = { > + { > + /* cif-d2m0 */ > + .bank_num = 2, > + .pin = 0, > + .func = 1, > + .route_offset = 0x184, > + .route_val = BIT(16 + 7), > + }, { > + /* cif-d2m1 */ > + .bank_num = 3, > + .pin = 3, > + .func = 3, > + .route_offset = 0x184, > + .route_val = BIT(16 + 7) | BIT(7), > + }, { > + /* pdm-m0 */ > + .bank_num = 3, > + .pin = 22, > + .func = 2, > + .route_offset = 0x184, > + .route_val = BIT(16 + 8), > + }, { > + /* pdm-m1 */ > + .bank_num = 2, > + .pin = 22, > + .func = 1, > + .route_offset = 0x184, > + .route_val = BIT(16 + 8) | BIT(8), > + }, { > + /* uart2-rxm0 */ > + .bank_num = 1, > + .pin = 27, > + .func = 2, > + .route_offset = 0x184, > + .route_val = BIT(16 + 10), > + }, { > + /* uart2-rxm1 */ > + .bank_num = 2, > + .pin = 14, > + .func = 2, > + .route_offset = 0x184, > + .route_val = BIT(16 + 10) | BIT(10), > + }, { > + /* uart3-rxm0 */ > + .bank_num = 0, > + .pin = 17, > + .func = 2, > + .route_offset = 0x184, > + .route_val = BIT(16 + 9), > + }, { > + /* uart3-rxm1 */ > + .bank_num = 1, > + .pin = 15, > + .func = 2, > + .route_offset = 0x184, > + .route_val = BIT(16 + 9) | BIT(9), > + }, > +}; > + > +static void px30_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 32 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = PX30_PULL_PMU_OFFSET; > + } else { > + *regmap = info->regmap_base; > + *reg = PX30_PULL_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the 2nd bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * PX30_PULL_BANK_STRIDE; > + } > + > + *reg += ((pin_num / PX30_PULL_PINS_PER_REG) * 4); > + *bit = (pin_num % PX30_PULL_PINS_PER_REG); > + *bit *= PX30_PULL_BITS_PER_PIN; > +} > + > +static void px30_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 32 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = PX30_DRV_PMU_OFFSET; > + } else { > + *regmap = info->regmap_base; > + *reg = PX30_DRV_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the 2nd bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * PX30_DRV_BANK_STRIDE; > + } > + > + *reg += ((pin_num / PX30_DRV_PINS_PER_REG) * 4); > + *bit = (pin_num % PX30_DRV_PINS_PER_REG); > + *bit *= PX30_DRV_BITS_PER_PIN; > +} > + > +static int px30_calc_schmitt(struct rockchip_pin_bank *bank, > + int pin_num, > + struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + int pins_per_reg; > + > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = PX30_SCHMITT_PMU_OFFSET; > + pins_per_reg = PX30_SCHMITT_PINS_PER_PMU_REG; > + } else { > + *regmap = info->regmap_base; > + *reg = PX30_SCHMITT_GRF_OFFSET; > + pins_per_reg = PX30_SCHMITT_PINS_PER_GRF_REG; > + *reg += (bank->bank_num - 1) * PX30_SCHMITT_BANK_STRIDE; > + } > + > + *reg += ((pin_num / pins_per_reg) * 4); > + *bit = pin_num % pins_per_reg; > + > + return 0; > +} > + > +static struct rockchip_pin_bank px30_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU), > + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT), > + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT), > + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT), > +}; > + > +static struct rockchip_pin_ctrl px30_pin_ctrl = { > + .pin_banks = px30_pin_banks, > + .nr_banks = ARRAY_SIZE(px30_pin_banks), > + .label = "PX30-GPIO", > + .type = PX30, > + .grf_mux_offset = 0x0, > + .pmu_mux_offset = 0x0, > + .iomux_routes = px30_mux_route_data, > + .niomux_routes = ARRAY_SIZE(px30_mux_route_data), > + .pull_calc_reg = px30_calc_pull, > + .drv_calc_reg = px30_calc_drv, > + .schmitt_calc_reg = px30_calc_schmitt, > +}; > + > +static const struct of_device_id px30_pinctrl_dt_match[] = { > + { .compatible = "rockchip,px30-pinctrl", > + .data = &px30_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver px30_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "px30-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = px30_pinctrl_dt_match, > + }, > +}; > + > +static int __init px30_pinctrl_init(void) > +{ > + return platform_driver_register(&px30_pinctrl_driver); > +} > +postcore_initcall(px30_pinctrl_init); > + > +MODULE_DESCRIPTION("PX30 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk2928.c b/drivers/pinctrl/rockchip/pinctrl-rk2928.c > new file mode 100644 > index 000000000000..14bca5b427da > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk2928.c > @@ -0,0 +1,70 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK2928_PULL_OFFSET 0x118 > +#define RK2928_PULL_PINS_PER_REG 16 > +#define RK2928_PULL_BANK_STRIDE 8 > + > +static void rk2928_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK2928_PULL_OFFSET; > + *reg += bank->bank_num * RK2928_PULL_BANK_STRIDE; > + *reg += (pin_num / RK2928_PULL_PINS_PER_REG) * 4; > + > + *bit = pin_num % RK2928_PULL_PINS_PER_REG; > +}; > + > +static struct rockchip_pin_bank rk2928_pin_banks[] = { > + PIN_BANK(0, 32, "gpio0"), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > + PIN_BANK(3, 32, "gpio3"), > +}; > + > +static struct rockchip_pin_ctrl rk2928_pin_ctrl = { > + .pin_banks = rk2928_pin_banks, > + .nr_banks = ARRAY_SIZE(rk2928_pin_banks), > + .label = "RK2928-GPIO", > + .type = RK2928, > + .grf_mux_offset = 0xa8, > + .pull_calc_reg = rk2928_calc_pull, > +}; > + > +static const struct of_device_id rk2928_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk2928-pinctrl", > + .data = &rk2928_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk2928_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk2928-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk2928_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk2928_pinctrl_init(void) > +{ > + return platform_driver_register(&rk2928_pinctrl_driver); > +} > +postcore_initcall(rk2928_pinctrl_init); > + > +MODULE_DESCRIPTION("RK2928 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3036.c b/drivers/pinctrl/rockchip/pinctrl-rk3036.c > new file mode 100644 > index 000000000000..78363fc892de > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3036.c > @@ -0,0 +1,69 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3036_PULL_OFFSET 0x118 > +#define RK3036_PULL_PINS_PER_REG 16 > +#define RK3036_PULL_BANK_STRIDE 8 > + > +static void rk3036_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3036_PULL_OFFSET; > + *reg += bank->bank_num * RK3036_PULL_BANK_STRIDE; > + *reg += (pin_num / RK3036_PULL_PINS_PER_REG) * 4; > + > + *bit = pin_num % RK3036_PULL_PINS_PER_REG; > +}; > + > +static struct rockchip_pin_bank rk3036_pin_banks[] = { > + PIN_BANK(0, 32, "gpio0"), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > +}; > + > +static struct rockchip_pin_ctrl rk3036_pin_ctrl = { > + .pin_banks = rk3036_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3036_pin_banks), > + .label = "RK3036-GPIO", > + .type = RK2928, > + .grf_mux_offset = 0xa8, > + .pull_calc_reg = rk3036_calc_pull, > +}; > + > +static const struct of_device_id rk3036_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3036-pinctrl", > + .data = &rk3036_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3036_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3036-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3036_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3036_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3036_pinctrl_driver); > +} > +postcore_initcall(rk3036_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3036 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3066a.c b/drivers/pinctrl/rockchip/pinctrl-rk3066a.c > new file mode 100644 > index 000000000000..476e7b2d738e > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3066a.c > @@ -0,0 +1,72 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3066A_PULL_GRF_OFFSET 0x118 > +#define RK3066A_PULL_PINS_PER_REG 16 > +#define RK3066A_PULL_BANK_STRIDE 8 > + > +static void rk3066a_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3066A_PULL_GRF_OFFSET; > + *reg += bank->bank_num * RK3066A_PULL_BANK_STRIDE; > + *reg += (pin_num / RK3066A_PULL_PINS_PER_REG) * 4; > + > + *bit = pin_num % RK3066A_PULL_PINS_PER_REG; > +}; > + > +static struct rockchip_pin_bank rk3066a_pin_banks[] = { > + PIN_BANK(0, 32, "gpio0"), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > + PIN_BANK(3, 32, "gpio3"), > + PIN_BANK(4, 32, "gpio4"), > + PIN_BANK(6, 16, "gpio6"), > +}; > + > +static struct rockchip_pin_ctrl rk3066a_pin_ctrl = { > + .pin_banks = rk3066a_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3066a_pin_banks), > + .label = "RK3066-GPIO", > + .type = RK2928, > + .grf_mux_offset = 0xa8, > + .pull_calc_reg = rk3066a_calc_pull, > +}; > + > +static const struct of_device_id rk3066a_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3066a-pinctrl", > + .data = &rk3066a_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3066a_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3066a-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3066a_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3066a_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3066a_pinctrl_driver); > +} > +postcore_initcall(rk3066a_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3066A pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3066b.c b/drivers/pinctrl/rockchip/pinctrl-rk3066b.c > new file mode 100644 > index 000000000000..7353cc8caa37 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3066b.c > @@ -0,0 +1,51 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +static struct rockchip_pin_bank rk3066b_pin_banks[] = { > + PIN_BANK(0, 32, "gpio0"), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > + PIN_BANK(3, 32, "gpio3"), > +}; > + > +static struct rockchip_pin_ctrl rk3066b_pin_ctrl = { > + .pin_banks = rk3066b_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3066b_pin_banks), > + .label = "RK3066b-GPIO", > + .type = RK3066B, > + .grf_mux_offset = 0x60, > +}; > + > +static const struct of_device_id rk3066b_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3066b-pinctrl", > + .data = &rk3066b_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3066b_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3066b-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3066b_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3066b_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3066b_pinctrl_driver); > +} > +postcore_initcall(rk3066b_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3066B pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3128.c b/drivers/pinctrl/rockchip/pinctrl-rk3128.c > new file mode 100644 > index 000000000000..da289019fd9c > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3128.c > @@ -0,0 +1,161 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3128_PULL_GRF_OFFSET 0x118 > +#define RK3128_PULL_PINS_PER_REG 16 > +#define RK3128_PULL_BANK_STRIDE 8 > + > +static struct rockchip_mux_route_data rk3128_mux_route_data[] = { > + { > + /* spi-0 */ > + .bank_num = 1, > + .pin = 10, > + .func = 1, > + .route_offset = 0x144, > + .route_val = BIT(16 + 3) | BIT(16 + 4), > + }, { > + /* spi-1 */ > + .bank_num = 1, > + .pin = 27, > + .func = 3, > + .route_offset = 0x144, > + .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(3), > + }, { > + /* spi-2 */ > + .bank_num = 0, > + .pin = 13, > + .func = 2, > + .route_offset = 0x144, > + .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(4), > + }, { > + /* i2s-0 */ > + .bank_num = 1, > + .pin = 5, > + .func = 1, > + .route_offset = 0x144, > + .route_val = BIT(16 + 5), > + }, { > + /* i2s-1 */ > + .bank_num = 0, > + .pin = 14, > + .func = 1, > + .route_offset = 0x144, > + .route_val = BIT(16 + 5) | BIT(5), > + }, { > + /* emmc-0 */ > + .bank_num = 1, > + .pin = 22, > + .func = 2, > + .route_offset = 0x144, > + .route_val = BIT(16 + 6), > + }, { > + /* emmc-1 */ > + .bank_num = 2, > + .pin = 4, > + .func = 2, > + .route_offset = 0x144, > + .route_val = BIT(16 + 6) | BIT(6), > + }, > +}; > + > +static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = { > + { > + .num = 2, > + .pin = 20, > + .reg = 0xe8, > + .bit = 0, > + .mask = 0x7 > + }, { > + .num = 2, > + .pin = 21, > + .reg = 0xe8, > + .bit = 4, > + .mask = 0x7 > + }, { > + .num = 2, > + .pin = 22, > + .reg = 0xe8, > + .bit = 8, > + .mask = 0x7 > + }, { > + .num = 2, > + .pin = 23, > + .reg = 0xe8, > + .bit = 12, > + .mask = 0x7 > + }, { > + .num = 2, > + .pin = 24, > + .reg = 0xd4, > + .bit = 12, > + .mask = 0x7 > + }, > +}; > + > +static void rk3128_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3128_PULL_GRF_OFFSET; > + *reg += bank->bank_num * RK3128_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3128_PULL_PINS_PER_REG) * 4); > + > + *bit = pin_num % RK3128_PULL_PINS_PER_REG; > +} > + > +static struct rockchip_pin_bank rk3128_pin_banks[] = { > + PIN_BANK(0, 32, "gpio0"), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > + PIN_BANK(3, 32, "gpio3"), > +}; > + > +static struct rockchip_pin_ctrl rk3128_pin_ctrl = { > + .pin_banks = rk3128_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3128_pin_banks), > + .label = "RK3128-GPIO", > + .type = RK3128, > + .grf_mux_offset = 0xa8, > + .iomux_recalced = rk3128_mux_recalced_data, > + .niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data), > + .iomux_routes = rk3128_mux_route_data, > + .niomux_routes = ARRAY_SIZE(rk3128_mux_route_data), > + .pull_calc_reg = rk3128_calc_pull, > +}; > + > +static const struct of_device_id rk3128_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3128-pinctrl", > + .data = &rk3128_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3128_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3128-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3128_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3128_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3128_pinctrl_driver); > +} > +postcore_initcall(rk3128_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3128 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3188.c b/drivers/pinctrl/rockchip/pinctrl-rk3188.c > new file mode 100644 > index 000000000000..802e3791f8b4 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3188.c > @@ -0,0 +1,147 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3188_PULL_GRF_OFFSET 0x164 > +#define RK3188_PULL_PMU_OFFSET 0x64 > +#define RK3188_PULL_BITS_PER_PIN 2 > +#define RK3188_PULL_PINS_PER_REG 8 > +#define RK3188_PULL_BANK_STRIDE 16 > + > +static void rk3188_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 12 pins of the first bank are located elsewhere */ > + if (bank->bank_num == 0 && pin_num < 12) { > + *regmap = info->regmap_pmu ? info->regmap_pmu > + : bank->regmap_pull; > + *reg = info->regmap_pmu ? RK3188_PULL_PMU_OFFSET : 0; > + *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); > + *bit = pin_num % RK3188_PULL_PINS_PER_REG; > + *bit *= RK3188_PULL_BITS_PER_PIN; > + } else { > + *regmap = info->regmap_pull ? info->regmap_pull > + : info->regmap_base; > + *reg = info->regmap_pull ? 0 : RK3188_PULL_GRF_OFFSET; > + > + /* correct the offset, as it is the second pull register */ > + *reg -= 4; > + *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4); > + > + /* > + * The bits in these registers have an inverse ordering > + * with the lowest pin being in bits 15:14 and the highest > + * pin in bits 1:0 > + */ > + *bit = 7 - (pin_num % RK3188_PULL_PINS_PER_REG); > + *bit *= RK3188_PULL_BITS_PER_PIN; > + } > +} > + > +static struct rockchip_pin_bank rk3188_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > + PIN_BANK(3, 32, "gpio3"), > +}; > + > +static struct rockchip_pin_ctrl rk3188_pin_ctrl = { > + .pin_banks = rk3188_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3188_pin_banks), > + .label = "RK3188-GPIO", > + .type = RK3188, > + .grf_mux_offset = 0x60, > + .pull_calc_reg = rk3188_calc_pull, > +}; > + > +static struct regmap_config rockchip_regmap_config = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = 4, > +}; > + > +static int rk3188_pinctrl_probe(struct platform_device *pdev) > +{ > + struct rockchip_pinctrl *info; > + int ret; > + > + ret = rockchip_pctrl_probe(pdev); > + if (ret) > + return ret; > + > + info = platform_get_drvdata(pdev); > + if (!info) > + return -EINVAL; > + > + if (IS_ERR_OR_NULL(info->regmap_base)) { > + struct resource *res; > + void __iomem *base; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + rockchip_regmap_config.max_register = resource_size(res) - 4; > + rockchip_regmap_config.name = "rockchip,pinctrl"; > + info->regmap_base = > + devm_regmap_init_mmio(&pdev->dev, base, > + &rockchip_regmap_config); > + > + /* to check for the old dt-bindings */ > + info->reg_size = resource_size(res); > + > + /* Honor the old binding, with pull registers as 2nd resource */ > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + rockchip_regmap_config.max_register = > + resource_size(res) - 4; > + rockchip_regmap_config.name = "rockchip,pinctrl-pull"; > + info->regmap_pull = > + devm_regmap_init_mmio(&pdev->dev, > + base, > + &rockchip_regmap_config); > + } > + > + return 0; > +} > + > +static const struct of_device_id rk3188_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3188-pinctrl", > + .data = &rk3188_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3188_pinctrl_driver = { > + .probe = rk3188_pinctrl_probe, > + .driver = { > + .name = "rk3188-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3188_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3188_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3188_pinctrl_driver); > +} > +postcore_initcall(rk3188_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3188 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3228.c b/drivers/pinctrl/rockchip/pinctrl-rk3228.c > new file mode 100644 > index 000000000000..2a4e14f7dc6c > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3228.c > @@ -0,0 +1,225 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3228_PULL_GRF_OFFSET 0x100 > +#define RK3228_PULL_BITS_PER_PIN 2 > +#define RK3228_PULL_PINS_PER_REG 8 > +#define RK3228_PULL_BANK_STRIDE 16 > + > +#define RK3228_DRV_GRF_OFFSET 0x200 > +#define RK3228_DRV_BITS_PER_PIN 2 > +#define RK3228_DRV_PINS_PER_REG 8 > +#define RK3228_DRV_BANK_STRIDE 16 > + > +static struct rockchip_mux_route_data rk3228_mux_route_data[] = { > + { > + /* pwm0-0 */ > + .bank_num = 0, > + .pin = 26, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16), > + }, { > + /* pwm0-1 */ > + .bank_num = 3, > + .pin = 21, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16) | BIT(0), > + }, { > + /* pwm1-0 */ > + .bank_num = 0, > + .pin = 27, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 1), > + }, { > + /* pwm1-1 */ > + .bank_num = 0, > + .pin = 30, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 1) | BIT(1), > + }, { > + /* pwm2-0 */ > + .bank_num = 0, > + .pin = 28, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 2), > + }, { > + /* pwm2-1 */ > + .bank_num = 1, > + .pin = 12, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 2) | BIT(2), > + }, { > + /* pwm3-0 */ > + .bank_num = 3, > + .pin = 26, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 3), > + }, { > + /* pwm3-1 */ > + .bank_num = 1, > + .pin = 11, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 3) | BIT(3), > + }, { > + /* sdio-0_d0 */ > + .bank_num = 1, > + .pin = 1, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 4), > + }, { > + /* sdio-1_d0 */ > + .bank_num = 3, > + .pin = 2, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 4) | BIT(4), > + }, { > + /* spi-0_rx */ > + .bank_num = 0, > + .pin = 13, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 5), > + }, { > + /* spi-1_rx */ > + .bank_num = 2, > + .pin = 0, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 5) | BIT(5), > + }, { > + /* emmc-0_cmd */ > + .bank_num = 1, > + .pin = 22, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 7), > + }, { > + /* emmc-1_cmd */ > + .bank_num = 2, > + .pin = 4, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 7) | BIT(7), > + }, { > + /* uart2-0_rx */ > + .bank_num = 1, > + .pin = 19, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 8), > + }, { > + /* uart2-1_rx */ > + .bank_num = 1, > + .pin = 10, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 8) | BIT(8), > + }, { > + /* uart1-0_rx */ > + .bank_num = 1, > + .pin = 10, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 11), > + }, { > + /* uart1-1_rx */ > + .bank_num = 3, > + .pin = 13, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 11) | BIT(11), > + }, > +}; > + > +static void rk3228_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3228_PULL_GRF_OFFSET; > + *reg += bank->bank_num * RK3228_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3228_PULL_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3228_PULL_PINS_PER_REG); > + *bit *= RK3228_PULL_BITS_PER_PIN; > +} > + > +static void rk3228_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3228_DRV_GRF_OFFSET; > + *reg += bank->bank_num * RK3228_DRV_BANK_STRIDE; > + *reg += ((pin_num / RK3228_DRV_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3228_DRV_PINS_PER_REG); > + *bit *= RK3228_DRV_BITS_PER_PIN; > +} > + > +static struct rockchip_pin_bank rk3228_pin_banks[] = { > + PIN_BANK(0, 32, "gpio0"), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > + PIN_BANK(3, 32, "gpio3"), > +}; > + > +static struct rockchip_pin_ctrl rk3228_pin_ctrl = { > + .pin_banks = rk3228_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3228_pin_banks), > + .label = "RK3228-GPIO", > + .type = RK3288, > + .grf_mux_offset = 0x0, > + .iomux_routes = rk3228_mux_route_data, > + .niomux_routes = ARRAY_SIZE(rk3228_mux_route_data), > + .pull_calc_reg = rk3228_calc_pull, > + .drv_calc_reg = rk3228_calc_drv, > +}; > + > +static const struct of_device_id rk3228_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3228-pinctrl", > + .data = &rk3228_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3228_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3228-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3228_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3228_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3228_pinctrl_driver); > +} > +postcore_initcall(rk3228_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3228 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3288.c b/drivers/pinctrl/rockchip/pinctrl-rk3288.c > new file mode 100644 > index 000000000000..d1a37833a758 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3288.c > @@ -0,0 +1,210 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3288_PULL_GRF_OFFSET 0x140 > +#define RK3288_PULL_PMU_OFFSET 0x64 > +#define RK3288_PULL_BITS_PER_PIN 2 > +#define RK3288_PULL_PINS_PER_REG 8 > +#define RK3288_PULL_BANK_STRIDE 16 > + > +#define RK3288_DRV_PMU_OFFSET 0x70 > +#define RK3288_DRV_GRF_OFFSET 0x1c0 > +#define RK3288_DRV_BITS_PER_PIN 2 > +#define RK3288_DRV_PINS_PER_REG 8 > +#define RK3288_DRV_BANK_STRIDE 16 > + > +#define RK3288_GRF_GPIO6C_IOMUX 0x64 > +#define GPIO6C6_SEL_WRITE_ENABLE BIT(28) > + > +static u32 rk3288_grf_gpio6c_iomux; > + > +static struct rockchip_mux_route_data rk3288_mux_route_data[] = { > + { > + /* edphdmi_cecinoutt1 */ > + .bank_num = 7, > + .pin = 16, > + .func = 2, > + .route_offset = 0x264, > + .route_val = BIT(16 + 12) | BIT(12), > + }, { > + /* edphdmi_cecinout */ > + .bank_num = 7, > + .pin = 23, > + .func = 4, > + .route_offset = 0x264, > + .route_val = BIT(16 + 12), > + }, > +}; > + > +static void rk3288_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 24 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = RK3288_PULL_PMU_OFFSET; > + > + *reg += ((pin_num / RK3288_PULL_PINS_PER_REG) * 4); > + *bit = pin_num % RK3288_PULL_PINS_PER_REG; > + *bit *= RK3288_PULL_BITS_PER_PIN; > + } else { > + *regmap = info->regmap_base; > + *reg = RK3288_PULL_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the 2nd bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * RK3288_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3288_PULL_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3288_PULL_PINS_PER_REG); > + *bit *= RK3288_PULL_BITS_PER_PIN; > + } > +} > + > +static void rk3288_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 24 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = RK3288_DRV_PMU_OFFSET; > + > + *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); > + *bit = pin_num % RK3288_DRV_PINS_PER_REG; > + *bit *= RK3288_DRV_BITS_PER_PIN; > + } else { > + *regmap = info->regmap_base; > + *reg = RK3288_DRV_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the 2nd bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE; > + *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3288_DRV_PINS_PER_REG); > + *bit *= RK3288_DRV_BITS_PER_PIN; > + } > +} > + > +static struct rockchip_pin_bank rk3288_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_UNROUTED), > + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", > + IOMUX_UNROUTED, > + IOMUX_UNROUTED, > + IOMUX_UNROUTED, > + 0), > + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, > + IOMUX_UNROUTED), > + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, > + IOMUX_WIDTH_4BIT), > + PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", > + IOMUX_WIDTH_4BIT, > + IOMUX_WIDTH_4BIT, > + 0, 0), > + PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", > + IOMUX_UNROUTED, > + 0, 0, > + IOMUX_UNROUTED), > + PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, > + IOMUX_UNROUTED), > + PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0, 0, > + IOMUX_WIDTH_4BIT, > + IOMUX_UNROUTED), > + PIN_BANK(8, 16, "gpio8"), > +}; > + > +static struct rockchip_pin_ctrl rk3288_pin_ctrl = { > + .pin_banks = rk3288_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3288_pin_banks), > + .label = "RK3288-GPIO", > + .type = RK3288, > + .grf_mux_offset = 0x0, > + .pmu_mux_offset = 0x84, > + .iomux_routes = rk3288_mux_route_data, > + .niomux_routes = ARRAY_SIZE(rk3288_mux_route_data), > + .pull_calc_reg = rk3288_calc_pull, > + .drv_calc_reg = rk3288_calc_drv, > +}; > + > +static int rk3288_pinctrl_suspend(struct device *dev) > +{ > + struct rockchip_pinctrl *info = dev_get_drvdata(dev); > + int ret = pinctrl_force_sleep(info->pctl_dev); > + > + if (ret) > + return ret; > + > + /* > + * RK3288 GPIO6_C6 mux would be modified by Maskrom when resume, so save > + * the setting here, and restore it at resume. > + */ > + ret = regmap_read(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, > + &rk3288_grf_gpio6c_iomux); > + if (ret) { > + pinctrl_force_default(info->pctl_dev); > + return ret; > + } > + > + return 0; > +} > + > +static int rk3288_pinctrl_resume(struct device *dev) > +{ > + struct rockchip_pinctrl *info = dev_get_drvdata(dev); > + int ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX, > + rk3288_grf_gpio6c_iomux | > + GPIO6C6_SEL_WRITE_ENABLE); > + > + if (ret) > + return ret; > + > + return pinctrl_force_default(info->pctl_dev); > +} > + > +SIMPLE_DEV_PM_OPS(rk3288_pinctrl_dev_pm_ops, > + rk3288_pinctrl_suspend, > + rk3288_pinctrl_resume); > + > +static const struct of_device_id rk3288_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3288-pinctrl", > + .data = &rk3288_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3288_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3288-pinctrl", > + .pm = &rk3288_pinctrl_dev_pm_ops, > + .of_match_table = rk3288_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3288_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3288_pinctrl_driver); > +} > +postcore_initcall(rk3288_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3288 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3308.c b/drivers/pinctrl/rockchip/pinctrl-rk3308.c > new file mode 100644 > index 000000000000..7c9bf608c431 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3308.c > @@ -0,0 +1,420 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3308_PULL_GRF_OFFSET 0xa0 > +#define RK3308_PULL_BITS_PER_PIN 2 > +#define RK3308_PULL_PINS_PER_REG 8 > +#define RK3308_PULL_BANK_STRIDE 16 > + > +#define RK3308_DRV_GRF_OFFSET 0x100 > +#define RK3308_DRV_BITS_PER_PIN 2 > +#define RK3308_DRV_PINS_PER_REG 8 > +#define RK3308_DRV_BANK_STRIDE 16 > + > +#define RK3308_SCHMITT_PINS_PER_REG 8 > +#define RK3308_SCHMITT_BANK_STRIDE 16 > +#define RK3308_SCHMITT_GRF_OFFSET 0x1a0 > + > +static struct rockchip_mux_route_data rk3308_mux_route_data[] = { > + { > + /* rtc_clk */ > + .bank_num = 0, > + .pin = 19, > + .func = 1, > + .route_offset = 0x314, > + .route_val = BIT(16 + 0) | BIT(0), > + }, { > + /* uart2_rxm0 */ > + .bank_num = 1, > + .pin = 22, > + .func = 2, > + .route_offset = 0x314, > + .route_val = BIT(16 + 2) | BIT(16 + 3), > + }, { > + /* uart2_rxm1 */ > + .bank_num = 4, > + .pin = 26, > + .func = 2, > + .route_offset = 0x314, > + .route_val = BIT(16 + 2) | BIT(16 + 3) | BIT(2), > + }, { > + /* i2c3_sdam0 */ > + .bank_num = 0, > + .pin = 15, > + .func = 2, > + .route_offset = 0x608, > + .route_val = BIT(16 + 8) | BIT(16 + 9), > + }, { > + /* i2c3_sdam1 */ > + .bank_num = 3, > + .pin = 12, > + .func = 2, > + .route_offset = 0x608, > + .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(8), > + }, { > + /* i2c3_sdam2 */ > + .bank_num = 2, > + .pin = 0, > + .func = 3, > + .route_offset = 0x608, > + .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(9), > + }, { > + /* i2s-8ch-1-sclktxm0 */ > + .bank_num = 1, > + .pin = 3, > + .func = 2, > + .route_offset = 0x308, > + .route_val = BIT(16 + 3), > + }, { > + /* i2s-8ch-1-sclkrxm0 */ > + .bank_num = 1, > + .pin = 4, > + .func = 2, > + .route_offset = 0x308, > + .route_val = BIT(16 + 3), > + }, { > + /* i2s-8ch-1-sclktxm1 */ > + .bank_num = 1, > + .pin = 13, > + .func = 2, > + .route_offset = 0x308, > + .route_val = BIT(16 + 3) | BIT(3), > + }, { > + /* i2s-8ch-1-sclkrxm1 */ > + .bank_num = 1, > + .pin = 14, > + .func = 2, > + .route_offset = 0x308, > + .route_val = BIT(16 + 3) | BIT(3), > + }, { > + /* pdm-clkm0 */ > + .bank_num = 1, > + .pin = 4, > + .func = 3, > + .route_offset = 0x308, > + .route_val = BIT(16 + 12) | BIT(16 + 13), > + }, { > + /* pdm-clkm1 */ > + .bank_num = 1, > + .pin = 14, > + .func = 4, > + .route_offset = 0x308, > + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12), > + }, { > + /* pdm-clkm2 */ > + .bank_num = 2, > + .pin = 6, > + .func = 2, > + .route_offset = 0x308, > + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13), > + }, { > + /* pdm-clkm-m2 */ > + .bank_num = 2, > + .pin = 4, > + .func = 3, > + .route_offset = 0x600, > + .route_val = BIT(16 + 2) | BIT(2), > + }, { > + /* spi1_miso */ > + .bank_num = 3, > + .pin = 10, > + .func = 3, > + .route_offset = 0x314, > + .route_val = BIT(16 + 9), > + }, { > + /* spi1_miso_m1 */ > + .bank_num = 2, > + .pin = 4, > + .func = 2, > + .route_offset = 0x314, > + .route_val = BIT(16 + 9) | BIT(9), > + }, { > + /* owire_m0 */ > + .bank_num = 0, > + .pin = 11, > + .func = 3, > + .route_offset = 0x314, > + .route_val = BIT(16 + 10) | BIT(16 + 11), > + }, { > + /* owire_m1 */ > + .bank_num = 1, > + .pin = 22, > + .func = 7, > + .route_offset = 0x314, > + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10), > + }, { > + /* owire_m2 */ > + .bank_num = 2, > + .pin = 2, > + .func = 5, > + .route_offset = 0x314, > + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11), > + }, { > + /* can_rxd_m0 */ > + .bank_num = 0, > + .pin = 11, > + .func = 2, > + .route_offset = 0x314, > + .route_val = BIT(16 + 12) | BIT(16 + 13), > + }, { > + /* can_rxd_m1 */ > + .bank_num = 1, > + .pin = 22, > + .func = 5, > + .route_offset = 0x314, > + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12), > + }, { > + /* can_rxd_m2 */ > + .bank_num = 2, > + .pin = 2, > + .func = 4, > + .route_offset = 0x314, > + .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13), > + }, { > + /* mac_rxd0_m0 */ > + .bank_num = 1, > + .pin = 20, > + .func = 3, > + .route_offset = 0x314, > + .route_val = BIT(16 + 14), > + }, { > + /* mac_rxd0_m1 */ > + .bank_num = 4, > + .pin = 2, > + .func = 2, > + .route_offset = 0x314, > + .route_val = BIT(16 + 14) | BIT(14), > + }, { > + /* uart3_rx */ > + .bank_num = 3, > + .pin = 12, > + .func = 4, > + .route_offset = 0x314, > + .route_val = BIT(16 + 15), > + }, { > + /* uart3_rx_m1 */ > + .bank_num = 0, > + .pin = 17, > + .func = 3, > + .route_offset = 0x314, > + .route_val = BIT(16 + 15) | BIT(15), > + }, > +}; > + > +static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = { > + { > + .num = 1, > + .pin = 14, > + .reg = 0x28, > + .bit = 12, > + .mask = 0xf > + }, { > + .num = 1, > + .pin = 15, > + .reg = 0x2c, > + .bit = 0, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 18, > + .reg = 0x30, > + .bit = 4, > + .mask = 0xf > + }, { > + .num = 1, > + .pin = 19, > + .reg = 0x30, > + .bit = 8, > + .mask = 0xf > + }, { > + .num = 1, > + .pin = 20, > + .reg = 0x30, > + .bit = 12, > + .mask = 0xf > + }, { > + .num = 1, > + .pin = 21, > + .reg = 0x34, > + .bit = 0, > + .mask = 0xf > + }, { > + .num = 1, > + .pin = 22, > + .reg = 0x34, > + .bit = 4, > + .mask = 0xf > + }, { > + .num = 1, > + .pin = 23, > + .reg = 0x34, > + .bit = 8, > + .mask = 0xf > + }, { > + .num = 3, > + .pin = 12, > + .reg = 0x68, > + .bit = 8, > + .mask = 0xf > + }, { > + .num = 3, > + .pin = 13, > + .reg = 0x68, > + .bit = 12, > + .mask = 0xf > + }, { > + .num = 2, > + .pin = 2, > + .reg = 0x608, > + .bit = 0, > + .mask = 0x7 > + }, { > + .num = 2, > + .pin = 3, > + .reg = 0x608, > + .bit = 4, > + .mask = 0x7 > + }, { > + .num = 2, > + .pin = 16, > + .reg = 0x610, > + .bit = 8, > + .mask = 0x7 > + }, { > + .num = 3, > + .pin = 10, > + .reg = 0x610, > + .bit = 0, > + .mask = 0x7 > + }, { > + .num = 3, > + .pin = 11, > + .reg = 0x610, > + .bit = 4, > + .mask = 0x7 > + }, > +}; > + > +static void rk3308_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3308_PULL_GRF_OFFSET; > + *reg += bank->bank_num * RK3308_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3308_PULL_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3308_PULL_PINS_PER_REG); > + *bit *= RK3308_PULL_BITS_PER_PIN; > +} > + > +static void rk3308_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3308_DRV_GRF_OFFSET; > + *reg += bank->bank_num * RK3308_DRV_BANK_STRIDE; > + *reg += ((pin_num / RK3308_DRV_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3308_DRV_PINS_PER_REG); > + *bit *= RK3308_DRV_BITS_PER_PIN; > +} > + > +static int rk3308_calc_schmitt(struct rockchip_pin_bank *bank, > + int pin_num, > + struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3308_SCHMITT_GRF_OFFSET; > + > + *reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE; > + *reg += ((pin_num / RK3308_SCHMITT_PINS_PER_REG) * 4); > + *bit = pin_num % RK3308_SCHMITT_PINS_PER_REG; > + > + return 0; > +} > + > +static struct rockchip_pin_bank rk3308_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT), > + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT), > + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT), > + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT), > + PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT, > + IOMUX_WIDTH_2BIT), > +}; > + > +static struct rockchip_pin_ctrl rk3308_pin_ctrl = { > + .pin_banks = rk3308_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3308_pin_banks), > + .label = "RK3308-GPIO", > + .type = RK3308, > + .grf_mux_offset = 0x0, > + .iomux_recalced = rk3308_mux_recalced_data, > + .niomux_recalced = ARRAY_SIZE(rk3308_mux_recalced_data), > + .iomux_routes = rk3308_mux_route_data, > + .niomux_routes = ARRAY_SIZE(rk3308_mux_route_data), > + .pull_calc_reg = rk3308_calc_pull, > + .drv_calc_reg = rk3308_calc_drv, > + .schmitt_calc_reg = rk3308_calc_schmitt, > +}; > + > +static const struct of_device_id rk3308_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3308-pinctrl", > + .data = &rk3308_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3308_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3308-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3308_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3308_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3308_pinctrl_driver); > +} > +postcore_initcall(rk3308_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3308 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3328.c b/drivers/pinctrl/rockchip/pinctrl-rk3328.c > new file mode 100644 > index 000000000000..4eedddf10fbc > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3328.c > @@ -0,0 +1,272 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3328_PULL_GRF_OFFSET 0x100 > +#define RK3328_PULL_BITS_PER_PIN 2 > +#define RK3328_PULL_PINS_PER_REG 8 > +#define RK3328_PULL_BANK_STRIDE 16 > + > +#define RK3328_DRV_GRF_OFFSET 0x200 > +#define RK3328_DRV_BITS_PER_PIN 2 > +#define RK3328_DRV_PINS_PER_REG 8 > +#define RK3328_DRV_BANK_STRIDE 16 > + > +#define RK3328_SCHMITT_GRF_OFFSET 0x380 > +#define RK3328_SCHMITT_BITS_PER_PIN 1 > +#define RK3328_SCHMITT_PINS_PER_REG 16 > +#define RK3328_SCHMITT_BANK_STRIDE 8 > + > +static struct rockchip_mux_route_data rk3328_mux_route_data[] = { > + { > + /* uart2dbg_rxm0 */ > + .bank_num = 1, > + .pin = 1, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16) | BIT(16 + 1), > + }, { > + /* uart2dbg_rxm1 */ > + .bank_num = 2, > + .pin = 1, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16) | BIT(16 + 1) | BIT(0), > + }, { > + /* gmac-m1_rxd0 */ > + .bank_num = 1, > + .pin = 11, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 2) | BIT(2), > + }, { > + /* gmac-m1-optimized_rxd3 */ > + .bank_num = 1, > + .pin = 14, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 10) | BIT(10), > + }, { > + /* pdm_sdi0m0 */ > + .bank_num = 2, > + .pin = 19, > + .func = 2, > + .route_offset = 0x50, > + .route_val = BIT(16 + 3), > + }, { > + /* pdm_sdi0m1 */ > + .bank_num = 1, > + .pin = 23, > + .func = 3, > + .route_offset = 0x50, > + .route_val = BIT(16 + 3) | BIT(3), > + }, { > + /* spi_rxdm2 */ > + .bank_num = 3, > + .pin = 2, > + .func = 4, > + .route_offset = 0x50, > + .route_val = BIT(16 + 4) | BIT(16 + 5) | BIT(5), > + }, { > + /* i2s2_sdim0 */ > + .bank_num = 1, > + .pin = 24, > + .func = 1, > + .route_offset = 0x50, > + .route_val = BIT(16 + 6), > + }, { > + /* i2s2_sdim1 */ > + .bank_num = 3, > + .pin = 2, > + .func = 6, > + .route_offset = 0x50, > + .route_val = BIT(16 + 6) | BIT(6), > + }, { > + /* card_iom1 */ > + .bank_num = 2, > + .pin = 22, > + .func = 3, > + .route_offset = 0x50, > + .route_val = BIT(16 + 7) | BIT(7), > + }, { > + /* tsp_d5m1 */ > + .bank_num = 2, > + .pin = 16, > + .func = 3, > + .route_offset = 0x50, > + .route_val = BIT(16 + 8) | BIT(8), > + }, { > + /* cif_data5m1 */ > + .bank_num = 2, > + .pin = 16, > + .func = 4, > + .route_offset = 0x50, > + .route_val = BIT(16 + 9) | BIT(9), > + }, > +}; > + > +static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = { > + { > + .num = 2, > + .pin = 8, > + .reg = 0x24, > + .bit = 0, > + .mask = 0x3 > + }, { > + .num = 2, > + .pin = 9, > + .reg = 0x24, > + .bit = 2, > + .mask = 0x3 > + }, { > + .num = 2, > + .pin = 10, > + .reg = 0x24, > + .bit = 4, > + .mask = 0x3 > + }, { > + .num = 2, > + .pin = 11, > + .reg = 0x24, > + .bit = 6, > + .mask = 0x3 > + }, { > + .num = 2, > + .pin = 12, > + .reg = 0x24, > + .bit = 8, > + .mask = 0x3 > + }, { > + .num = 2, > + .pin = 13, > + .reg = 0x24, > + .bit = 10, > + .mask = 0x3 > + }, { > + .num = 2, > + .pin = 14, > + .reg = 0x24, > + .bit = 12, > + .mask = 0x3 > + }, { > + .num = 2, > + .pin = 15, > + .reg = 0x28, > + .bit = 0, > + .mask = 0x7 > + }, { > + .num = 2, > + .pin = 23, > + .reg = 0x30, > + .bit = 14, > + .mask = 0x3 > + }, > +}; > + > +static void rk3328_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3328_PULL_GRF_OFFSET; > + *reg += bank->bank_num * RK3328_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3328_PULL_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3328_PULL_PINS_PER_REG); > + *bit *= RK3328_PULL_BITS_PER_PIN; > +} > + > +static void rk3328_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3328_DRV_GRF_OFFSET; > + *reg += bank->bank_num * RK3328_DRV_BANK_STRIDE; > + *reg += ((pin_num / RK3328_DRV_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3328_DRV_PINS_PER_REG); > + *bit *= RK3328_DRV_BITS_PER_PIN; > +} > + > +static int rk3328_calc_schmitt(struct rockchip_pin_bank *bank, > + int pin_num, > + struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + *regmap = info->regmap_base; > + *reg = RK3328_SCHMITT_GRF_OFFSET; > + > + *reg += bank->bank_num * RK3328_SCHMITT_BANK_STRIDE; > + *reg += ((pin_num / RK3328_SCHMITT_PINS_PER_REG) * 4); > + *bit = pin_num % RK3328_SCHMITT_PINS_PER_REG; > + > + return 0; > +} > + > +static struct rockchip_pin_bank rk3328_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), > + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), > + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, > + IOMUX_WIDTH_3BIT, > + IOMUX_WIDTH_3BIT, > + 0), > + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", > + IOMUX_WIDTH_3BIT, > + IOMUX_WIDTH_3BIT, > + 0, 0), > +}; > + > +static struct rockchip_pin_ctrl rk3328_pin_ctrl = { > + .pin_banks = rk3328_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3328_pin_banks), > + .label = "RK3328-GPIO", > + .type = RK3288, > + .grf_mux_offset = 0x0, > + .iomux_recalced = rk3328_mux_recalced_data, > + .niomux_recalced = ARRAY_SIZE(rk3328_mux_recalced_data), > + .iomux_routes = rk3328_mux_route_data, > + .niomux_routes = ARRAY_SIZE(rk3328_mux_route_data), > + .pull_calc_reg = rk3328_calc_pull, > + .drv_calc_reg = rk3328_calc_drv, > + .schmitt_calc_reg = rk3328_calc_schmitt, > +}; > + > +static const struct of_device_id rk3328_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3328-pinctrl", > + .data = &rk3328_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3328_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3328-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3328_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3328_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3328_pinctrl_driver); > +} > +postcore_initcall(rk3328_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3328 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3368.c b/drivers/pinctrl/rockchip/pinctrl-rk3368.c > new file mode 100644 > index 000000000000..f1bc71673fd2 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3368.c > @@ -0,0 +1,125 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3368_PULL_GRF_OFFSET 0x100 > +#define RK3368_PULL_PMU_OFFSET 0x10 > +#define RK3368_PULL_BITS_PER_PIN 2 > +#define RK3368_PULL_PINS_PER_REG 8 > +#define RK3368_PULL_BANK_STRIDE 16 > + > +#define RK3368_DRV_GRF_OFFSET 0x200 > +#define RK3368_DRV_PMU_OFFSET 0x20 > +#define RK3368_DRV_BITS_PER_PIN 2 > +#define RK3368_DRV_PINS_PER_REG 8 > +#define RK3368_DRV_BANK_STRIDE 16 > + > +static void rk3368_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 32 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = RK3368_PULL_PMU_OFFSET; > + > + *reg += ((pin_num / RK3368_PULL_PINS_PER_REG) * 4); > + *bit = pin_num % RK3368_PULL_PINS_PER_REG; > + *bit *= RK3368_PULL_BITS_PER_PIN; > + } else { > + *regmap = info->regmap_base; > + *reg = RK3368_PULL_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the second bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * RK3368_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3368_PULL_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3368_PULL_PINS_PER_REG); > + *bit *= RK3368_PULL_BITS_PER_PIN; > + } > +} > + > +static void rk3368_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 32 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = RK3368_DRV_PMU_OFFSET; > + > + *reg += ((pin_num / RK3368_DRV_PINS_PER_REG) * 4); > + *bit = pin_num % RK3368_DRV_PINS_PER_REG; > + *bit *= RK3368_DRV_BITS_PER_PIN; > + } else { > + *regmap = info->regmap_base; > + *reg = RK3368_DRV_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the second bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * RK3368_DRV_BANK_STRIDE; > + *reg += ((pin_num / RK3368_DRV_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3368_DRV_PINS_PER_REG); > + *bit *= RK3368_DRV_BITS_PER_PIN; > + } > +} > + > +static struct rockchip_pin_bank rk3368_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU), > + PIN_BANK(1, 32, "gpio1"), > + PIN_BANK(2, 32, "gpio2"), > + PIN_BANK(3, 32, "gpio3"), > +}; > + > +static struct rockchip_pin_ctrl rk3368_pin_ctrl = { > + .pin_banks = rk3368_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3368_pin_banks), > + .label = "RK3368-GPIO", > + .type = RK3368, > + .grf_mux_offset = 0x0, > + .pmu_mux_offset = 0x0, > + .pull_calc_reg = rk3368_calc_pull, > + .drv_calc_reg = rk3368_calc_drv, > +}; > + > +static const struct of_device_id rk3368_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3368-pinctrl", > + .data = &rk3368_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3368_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3368-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3368_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3368_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3368_pinctrl_driver); > +} > +postcore_initcall(rk3368_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3368 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3399.c b/drivers/pinctrl/rockchip/pinctrl-rk3399.c > new file mode 100644 > index 000000000000..3c23806037f4 > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rk3399.c > @@ -0,0 +1,195 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RK3399_PULL_GRF_OFFSET 0xe040 > +#define RK3399_PULL_PMU_OFFSET 0x40 > +#define RK3399_PULL_BITS_PER_PIN 2 > +#define RK3399_PULL_PINS_PER_REG 8 > +#define RK3399_PULL_BANK_STRIDE 16 > + > +static struct rockchip_mux_route_data rk3399_mux_route_data[] = { > + { > + /* uart2dbga_rx */ > + .bank_num = 4, > + .pin = 8, > + .func = 2, > + .route_offset = 0xe21c, > + .route_val = BIT(16 + 10) | BIT(16 + 11), > + }, { > + /* uart2dbgb_rx */ > + .bank_num = 4, > + .pin = 16, > + .func = 2, > + .route_offset = 0xe21c, > + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10), > + }, { > + /* uart2dbgc_rx */ > + .bank_num = 4, > + .pin = 19, > + .func = 1, > + .route_offset = 0xe21c, > + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11), > + }, { > + /* pcie_clkreqn */ > + .bank_num = 2, > + .pin = 26, > + .func = 2, > + .route_offset = 0xe21c, > + .route_val = BIT(16 + 14), > + }, { > + /* pcie_clkreqnb */ > + .bank_num = 4, > + .pin = 24, > + .func = 1, > + .route_offset = 0xe21c, > + .route_val = BIT(16 + 14) | BIT(14), > + }, > +}; > + > +static void rk3399_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The bank0:16 and bank1:32 pins are located in PMU */ > + if (bank->bank_num == 0 || bank->bank_num == 1) { > + *regmap = info->regmap_pmu; > + *reg = RK3399_PULL_PMU_OFFSET; > + > + *reg += bank->bank_num * RK3399_PULL_BANK_STRIDE; > + > + *reg += ((pin_num / RK3399_PULL_PINS_PER_REG) * 4); > + *bit = pin_num % RK3399_PULL_PINS_PER_REG; > + *bit *= RK3399_PULL_BITS_PER_PIN; > + } else { > + *regmap = info->regmap_base; > + *reg = RK3399_PULL_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the 3rd bank */ > + *reg -= 0x20; > + *reg += bank->bank_num * RK3399_PULL_BANK_STRIDE; > + *reg += ((pin_num / RK3399_PULL_PINS_PER_REG) * 4); > + > + *bit = (pin_num % RK3399_PULL_PINS_PER_REG); > + *bit *= RK3399_PULL_BITS_PER_PIN; > + } > +} > + > +static void rk3399_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + int drv_num = (pin_num / 8); > + > + /* The bank0:16 and bank1:32 pins are located in PMU */ > + if (bank->bank_num == 0 || bank->bank_num == 1) > + *regmap = info->regmap_pmu; > + else > + *regmap = info->regmap_base; > + > + *reg = bank->drv[drv_num].offset; > + if (bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO || > + bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY) > + *bit = (pin_num % 8) * 3; > + else > + *bit = (pin_num % 8) * 2; > +} > + > +static struct rockchip_pin_bank rk3399_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(0, 32, "gpio0", > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + DRV_TYPE_IO_1V8_ONLY, > + DRV_TYPE_IO_1V8_ONLY, > + DRV_TYPE_IO_DEFAULT, > + DRV_TYPE_IO_DEFAULT, > + 0x80, > + 0x88, > + -1, > + -1, > + PULL_TYPE_IO_1V8_ONLY, > + PULL_TYPE_IO_1V8_ONLY, > + PULL_TYPE_IO_DEFAULT, > + PULL_TYPE_IO_DEFAULT), > + PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_OR_3V0, > + 0xa0, > + 0xa8, > + 0xb0, > + 0xb8), > + PIN_BANK_DRV_FLAGS_PULL_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_ONLY, > + DRV_TYPE_IO_1V8_ONLY, > + PULL_TYPE_IO_DEFAULT, > + PULL_TYPE_IO_DEFAULT, > + PULL_TYPE_IO_1V8_ONLY, > + PULL_TYPE_IO_1V8_ONLY), > + PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY, > + DRV_TYPE_IO_3V3_ONLY, > + DRV_TYPE_IO_3V3_ONLY, > + DRV_TYPE_IO_1V8_OR_3V0), > + PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_3V0_AUTO, > + DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_OR_3V0), > +}; > + > +static struct rockchip_pin_ctrl rk3399_pin_ctrl = { > + .pin_banks = rk3399_pin_banks, > + .nr_banks = ARRAY_SIZE(rk3399_pin_banks), > + .label = "RK3399-GPIO", > + .type = RK3399, > + .grf_mux_offset = 0xe000, > + .pmu_mux_offset = 0x0, > + .grf_drv_offset = 0xe100, > + .pmu_drv_offset = 0x80, > + .iomux_routes = rk3399_mux_route_data, > + .niomux_routes = ARRAY_SIZE(rk3399_mux_route_data), > + .pull_calc_reg = rk3399_calc_pull, > + .drv_calc_reg = rk3399_calc_drv, > +}; > + > +static const struct of_device_id rk3399_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rk3399-pinctrl", > + .data = &rk3399_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rk3399_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rk3399-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rk3399_pinctrl_dt_match, > + }, > +}; > + > +static int __init rk3399_pinctrl_init(void) > +{ > + return platform_driver_register(&rk3399_pinctrl_driver); > +} > +postcore_initcall(rk3399_pinctrl_init); > + > +MODULE_DESCRIPTION("RK3399 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip.c b/drivers/pinctrl/rockchip/pinctrl-rockchip.c > new file mode 100644 > index 000000000000..16b013026fda > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip.c > @@ -0,0 +1,2043 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + * > + * Pinctrl driver for Rockchip SoCs > + * > + * Copyright (c) 2013 MundoReader S.L. > + * Author: Heiko Stuebner > + * > + * With some ideas taken from pinctrl-samsung: > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * Copyright (c) 2012 Linaro Ltd > + * http://www.linaro.org > + * > + * and pinctrl-at91: > + * Copyright (C) 2011-2012 Jean-Christophe > + * PLAGNIOL-VILLARD > + */ > + > +#include "pinctrl-rockchip.h" > + > +/* GPIO control registers */ > +#define GPIO_SWPORT_DR 0x00 > +#define GPIO_SWPORT_DDR 0x04 > +#define GPIO_INTEN 0x30 > +#define GPIO_INTMASK 0x34 > +#define GPIO_INTTYPE_LEVEL 0x38 > +#define GPIO_INT_POLARITY 0x3c > +#define GPIO_INT_STATUS 0x40 > +#define GPIO_INT_RAWSTATUS 0x44 > +#define GPIO_DEBOUNCE 0x48 > +#define GPIO_PORTS_EOI 0x4c > +#define GPIO_EXT_PORT 0x50 > +#define GPIO_LS_SYNC 0x60 > + > +#define RK3188_PULL_BITS_PER_PIN 2 > +#define RK3288_DRV_BITS_PER_PIN 2 > +#define RK3399_DRV_3BITS_PER_PIN 3 > + > +static struct regmap_config rockchip_regmap_config = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = 4, > +}; > + > +static inline const struct rockchip_pin_group * > +pinctrl_name_to_group(const struct rockchip_pinctrl *info, > + const char *name) > +{ > + int i; > + > + for (i = 0; i < info->ngroups; i++) { > + if (!strcmp(info->groups[i].name, name)) > + return &info->groups[i]; > + } > + > + return NULL; > +} > + > +/* > + * given a pin number that is local to a pin controller, find out the pin bank > + * and the register base of the pin bank. > + */ > +static struct rockchip_pin_bank *pin_to_bank(struct rockchip_pinctrl *info, > + unsigned int pin) > +{ > + struct rockchip_pin_bank *b = info->ctrl->pin_banks; > + > + while (pin >= (b->pin_base + b->nr_pins)) > + b++; > + > + return b; > +} > + > +static struct rockchip_pin_bank * > +bank_num_to_bank(struct rockchip_pinctrl *info, unsigned int num) > +{ > + struct rockchip_pin_bank *b = info->ctrl->pin_banks; > + int i; > + > + for (i = 0; i < info->ctrl->nr_banks; i++, b++) { > + if (b->bank_num == num) > + return b; > + } > + > + return ERR_PTR(-EINVAL); > +} > + > +/* > + * Pinctrl_ops handling > + */ > + > +static int rockchip_get_groups_count(struct pinctrl_dev *pctldev) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + > + return info->ngroups; > +} > + > +static const char *rockchip_get_group_name(struct pinctrl_dev *pctldev, > + unsigned int selector) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + > + return info->groups[selector].name; > +} > + > +static int rockchip_get_group_pins(struct pinctrl_dev *pctldev, > + unsigned int selector, > + const unsigned int **pins, > + unsigned int *npins) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + > + if (selector >= info->ngroups) > + return -EINVAL; > + > + *pins = info->groups[selector].pins; > + *npins = info->groups[selector].npins; > + > + return 0; > +} > + > +static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, > + struct device_node *np, > + struct pinctrl_map **map, > + unsigned int *num_maps) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + const struct rockchip_pin_group *grp; > + struct pinctrl_map *new_map; > + struct device_node *parent; > + int map_num = 1; > + int i; > + > + /* > + * first find the group of this node and check if we need to create > + * config maps for pins > + */ > + grp = pinctrl_name_to_group(info, np->name); > + if (!grp) { > + dev_err(info->dev, "unable to find group for node %pOFn\n", > + np); > + return -EINVAL; > + } > + > + map_num += grp->npins; > + new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), > + GFP_KERNEL); > + if (!new_map) > + return -ENOMEM; > + > + *map = new_map; > + *num_maps = map_num; > + > + /* create mux map */ > + parent = of_get_parent(np); > + if (!parent) { > + devm_kfree(pctldev->dev, new_map); > + return -EINVAL; > + } > + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; > + new_map[0].data.mux.function = parent->name; > + new_map[0].data.mux.group = np->name; > + of_node_put(parent); > + > + /* create config map */ > + new_map++; > + for (i = 0; i < grp->npins; i++) { > + new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; > + new_map[i].data.configs.group_or_pin = > + pin_get_name(pctldev, grp->pins[i]); > + new_map[i].data.configs.configs = grp->data[i].configs; > + new_map[i].data.configs.num_configs = grp->data[i].nconfigs; > + } > + > + dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", > + (*map)->data.mux.function, (*map)->data.mux.group, map_num); > + > + return 0; > +} > + > +static void rockchip_dt_free_map(struct pinctrl_dev *pctldev, > + struct pinctrl_map *map, > + unsigned int num_maps) > +{ > +} > + > +static const struct pinctrl_ops rockchip_pctrl_ops = { > + .get_groups_count = rockchip_get_groups_count, > + .get_group_name = rockchip_get_group_name, > + .get_group_pins = rockchip_get_group_pins, > + .dt_node_to_map = rockchip_dt_node_to_map, > + .dt_free_map = rockchip_dt_free_map, > +}; > + > +static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin, > + int *reg, u8 *bit, int *mask) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct rockchip_mux_recalced_data *data; > + int i; > + > + for (i = 0; i < ctrl->niomux_recalced; i++) { > + data = &ctrl->iomux_recalced[i]; > + if (data->num == bank->bank_num && > + data->pin == pin) > + break; > + } > + > + if (i >= ctrl->niomux_recalced) > + return; > + > + *reg = data->reg; > + *mask = data->mask; > + *bit = data->bit; > +} > + > +static bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin, > + int mux, u32 *loc, u32 *reg, u32 *value) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct rockchip_mux_route_data *data; > + int i; > + > + for (i = 0; i < ctrl->niomux_routes; i++) { > + data = &ctrl->iomux_routes[i]; > + if (data->bank_num == bank->bank_num && > + data->pin == pin && data->func == mux) > + break; > + } > + > + if (i >= ctrl->niomux_routes) > + return false; > + > + *loc = data->route_location; > + *reg = data->route_offset; > + *value = data->route_val; > + > + return true; > +} > + > +static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + int iomux_num = (pin / 8); > + struct regmap *regmap; > + unsigned int val; > + int reg, ret, mask, mux_type; > + u8 bit; > + > + if (iomux_num > 3) > + return -EINVAL; > + > + if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { > + dev_err(info->dev, "pin %d is unrouted\n", pin); > + return -EINVAL; > + } > + > + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) > + return RK_FUNC_GPIO; > + > + regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) > + ? info->regmap_pmu : info->regmap_base; > + > + /* get basic quadrupel of mux registers and the correct reg inside */ > + mux_type = bank->iomux[iomux_num].type; > + reg = bank->iomux[iomux_num].offset; > + if (mux_type & IOMUX_WIDTH_4BIT) { > + if ((pin % 8) >= 4) > + reg += 0x4; > + bit = (pin % 4) * 4; > + mask = 0xf; > + } else if (mux_type & IOMUX_WIDTH_3BIT) { > + if ((pin % 8) >= 5) > + reg += 0x4; > + bit = (pin % 8 % 5) * 3; > + mask = 0x7; > + } else { > + bit = (pin % 8) * 2; > + mask = 0x3; > + } > + > + if (bank->recalced_mask & BIT(pin)) > + rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); > + > + ret = regmap_read(regmap, reg, &val); > + if (ret) > + return ret; > + > + return ((val >> bit) & mask); > +} > + > +static int rockchip_verify_mux(struct rockchip_pin_bank *bank, > + int pin, int mux) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + int iomux_num = (pin / 8); > + > + if (iomux_num > 3) > + return -EINVAL; > + > + if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { > + dev_err(info->dev, "pin %d is unrouted\n", pin); > + return -EINVAL; > + } > + > + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) { > + if (mux != RK_FUNC_GPIO) { > + dev_err(info->dev, > + "pin %d only supports a gpio mux\n", pin); > + return -ENOTSUPP; > + } > + } > + > + return 0; > +} > + > +/* > + * Set a new mux function for a pin. > + * > + * The register is divided into the upper and lower 16 bit. When changing > + * a value, the previous register value is not read and changed. Instead > + * it seems the changed bits are marked in the upper 16 bit, while the > + * changed value gets set in the same offset in the lower 16 bit. > + * All pin settings seem to be 2 bit wide in both the upper and lower > + * parts. > + * @bank: pin bank to change > + * @pin: pin to change > + * @mux: new mux function to set > + */ > +static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + int iomux_num = (pin / 8); > + struct regmap *regmap; > + int reg, ret, mask, mux_type; > + u8 bit; > + u32 data, rmask, route_location, route_reg, route_val; > + > + ret = rockchip_verify_mux(bank, pin, mux); > + if (ret < 0) > + return ret; > + > + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) > + return 0; > + > + dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n", > + bank->bank_num, pin, mux); > + > + regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) > + ? info->regmap_pmu : info->regmap_base; > + > + /* get basic quadrupel of mux registers and the correct reg inside */ > + mux_type = bank->iomux[iomux_num].type; > + reg = bank->iomux[iomux_num].offset; > + if (mux_type & IOMUX_WIDTH_4BIT) { > + if ((pin % 8) >= 4) > + reg += 0x4; > + bit = (pin % 4) * 4; > + mask = 0xf; > + } else if (mux_type & IOMUX_WIDTH_3BIT) { > + if ((pin % 8) >= 5) > + reg += 0x4; > + bit = (pin % 8 % 5) * 3; > + mask = 0x7; > + } else { > + bit = (pin % 8) * 2; > + mask = 0x3; > + } > + > + if (bank->recalced_mask & BIT(pin)) > + rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); > + > + if (bank->route_mask & BIT(pin)) { > + if (rockchip_get_mux_route(bank, pin, mux, &route_location, > + &route_reg, &route_val)) { > + struct regmap *route_regmap = regmap; > + > + /* handle special locations */ > + switch (route_location) { > + case ROCKCHIP_ROUTE_PMU: > + route_regmap = info->regmap_pmu; > + break; > + case ROCKCHIP_ROUTE_GRF: > + route_regmap = info->regmap_base; > + break; > + } > + > + ret = regmap_write(route_regmap, route_reg, route_val); > + if (ret) > + return ret; > + } > + } > + > + data = (mask << (bit + 16)); > + rmask = data | (data >> 16); > + data |= (mux & mask) << bit; > + ret = regmap_update_bits(regmap, reg, rmask, data); > + > + return ret; > +} > + > +static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = { > + { 2, 4, 8, 12, -1, -1, -1, -1 }, > + { 3, 6, 9, 12, -1, -1, -1, -1 }, > + { 5, 10, 15, 20, -1, -1, -1, -1 }, > + { 4, 6, 8, 10, 12, 14, 16, 18 }, > + { 4, 7, 10, 13, 16, 19, 22, 26 } > +}; > + > +static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank, > + int pin_num) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret; > + u32 data, temp, rmask_bits; > + u8 bit; > + int drv_type = bank->drv[pin_num / 8].drv_type; > + > + ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); > + > + switch (drv_type) { > + case DRV_TYPE_IO_1V8_3V0_AUTO: > + case DRV_TYPE_IO_3V3_ONLY: > + rmask_bits = RK3399_DRV_3BITS_PER_PIN; > + switch (bit) { > + case 0 ... 12: > + /* regular case, nothing to do */ > + break; > + case 15: > + /* > + * drive-strength offset is special, as it is > + * spread over 2 registers > + */ > + ret = regmap_read(regmap, reg, &data); > + if (ret) > + return ret; > + > + ret = regmap_read(regmap, reg + 0x4, &temp); > + if (ret) > + return ret; > + > + /* > + * the bit data[15] contains bit 0 of the value > + * while temp[1:0] contains bits 2 and 1 > + */ > + data >>= 15; > + temp &= 0x3; > + temp <<= 1; > + data |= temp; > + > + return rockchip_perpin_drv_list[drv_type][data]; > + case 18 ... 21: > + /* setting fully enclosed in the second register */ > + reg += 4; > + bit -= 16; > + break; > + default: > + dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", > + bit, drv_type); > + return -EINVAL; > + } > + > + break; > + case DRV_TYPE_IO_DEFAULT: > + case DRV_TYPE_IO_1V8_OR_3V0: > + case DRV_TYPE_IO_1V8_ONLY: > + rmask_bits = RK3288_DRV_BITS_PER_PIN; > + break; > + default: > + dev_err(info->dev, "unsupported pinctrl drive type: %d\n", > + drv_type); > + return -EINVAL; > + } > + > + ret = regmap_read(regmap, reg, &data); > + if (ret) > + return ret; > + > + data >>= bit; > + data &= (1 << rmask_bits) - 1; > + > + return rockchip_perpin_drv_list[drv_type][data]; > +} > + > +static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, > + int pin_num, int strength) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret, i; > + u32 data, rmask, rmask_bits, temp; > + u8 bit; > + int drv_type = bank->drv[pin_num / 8].drv_type; > + > + dev_dbg(info->dev, "setting drive of GPIO%d-%d to %d\n", > + bank->bank_num, pin_num, strength); > + > + ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); > + > + ret = -EINVAL; > + for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) { > + if (rockchip_perpin_drv_list[drv_type][i] == strength) { > + ret = i; > + break; > + } else if (rockchip_perpin_drv_list[drv_type][i] < 0) { > + ret = rockchip_perpin_drv_list[drv_type][i]; > + break; > + } > + } > + > + if (ret < 0) { > + dev_err(info->dev, "unsupported driver strength %d\n", > + strength); > + return ret; > + } > + > + switch (drv_type) { > + case DRV_TYPE_IO_1V8_3V0_AUTO: > + case DRV_TYPE_IO_3V3_ONLY: > + rmask_bits = RK3399_DRV_3BITS_PER_PIN; > + switch (bit) { > + case 0 ... 12: > + /* regular case, nothing to do */ > + break; > + case 15: > + /* > + * drive-strength offset is special, as it is spread > + * over 2 registers, the bit data[15] contains bit 0 > + * of the value while temp[1:0] contains bits 2 and 1 > + */ > + data = (ret & 0x1) << 15; > + temp = (ret >> 0x1) & 0x3; > + > + rmask = BIT(15) | BIT(31); > + data |= BIT(31); > + ret = regmap_update_bits(regmap, reg, rmask, data); > + if (ret) > + return ret; > + > + rmask = 0x3 | (0x3 << 16); > + temp |= (0x3 << 16); > + reg += 0x4; > + ret = regmap_update_bits(regmap, reg, rmask, temp); > + > + return ret; > + case 18 ... 21: > + /* setting fully enclosed in the second register */ > + reg += 4; > + bit -= 16; > + break; > + default: > + dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n", > + bit, drv_type); > + return -EINVAL; > + } > + break; > + case DRV_TYPE_IO_DEFAULT: > + case DRV_TYPE_IO_1V8_OR_3V0: > + case DRV_TYPE_IO_1V8_ONLY: > + rmask_bits = RK3288_DRV_BITS_PER_PIN; > + break; > + default: > + dev_err(info->dev, "unsupported pinctrl drive type: %d\n", > + drv_type); > + return -EINVAL; > + } > + > + /* enable the write to the equivalent lower bits */ > + data = ((1 << rmask_bits) - 1) << (bit + 16); > + rmask = data | (data >> 16); > + data |= (ret << bit); > + > + ret = regmap_update_bits(regmap, reg, rmask, data); > + > + return ret; > +} > + > +static int rockchip_pull_list[PULL_TYPE_MAX][4] = { > + { > + PIN_CONFIG_BIAS_DISABLE, > + PIN_CONFIG_BIAS_PULL_UP, > + PIN_CONFIG_BIAS_PULL_DOWN, > + PIN_CONFIG_BIAS_BUS_HOLD > + }, > + { > + PIN_CONFIG_BIAS_DISABLE, > + PIN_CONFIG_BIAS_PULL_DOWN, > + PIN_CONFIG_BIAS_DISABLE, > + PIN_CONFIG_BIAS_PULL_UP > + }, > +}; > + > +static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret, pull_type; > + u8 bit; > + u32 data; > + > + /* rk3066b does support any pulls */ > + if (ctrl->type == RK3066B) > + return PIN_CONFIG_BIAS_DISABLE; > + > + ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit); > + > + ret = regmap_read(regmap, reg, &data); > + if (ret) > + return ret; > + > + switch (ctrl->type) { > + case RK2928: > + case RK3128: > + return !(data & BIT(bit)) > + ? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT > + : PIN_CONFIG_BIAS_DISABLE; > + case PX30: > + case RV1108: > + case RK3188: > + case RK3288: > + case RK3308: > + case RK3368: > + case RK3399: > + pull_type = bank->pull_type[pin_num / 8]; > + data >>= bit; > + data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1; > + > + return rockchip_pull_list[pull_type][data]; > + default: > + dev_err(info->dev, "unsupported pinctrl type\n"); > + return -EINVAL; > + }; > +} > + > +static int rockchip_set_pull(struct rockchip_pin_bank *bank, > + int pin_num, int pull) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret, i, pull_type; > + u8 bit; > + u32 data, rmask; > + > + dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n", > + bank->bank_num, pin_num, pull); > + > + /* rk3066b does support any pulls */ > + if (ctrl->type == RK3066B) > + return pull ? -EINVAL : 0; > + > + ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit); > + > + switch (ctrl->type) { > + case RK2928: > + case RK3128: > + data = BIT(bit + 16); > + if (pull == PIN_CONFIG_BIAS_DISABLE) > + data |= BIT(bit); > + ret = regmap_write(regmap, reg, data); > + break; > + case PX30: > + case RV1108: > + case RK3188: > + case RK3288: > + case RK3308: > + case RK3368: > + case RK3399: > + pull_type = bank->pull_type[pin_num / 8]; > + ret = -EINVAL; > + for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[pull_type]); > + i++) { > + if (rockchip_pull_list[pull_type][i] == pull) { > + ret = i; > + break; > + } > + } > + > + if (ret < 0) { > + dev_err(info->dev, "unsupported pull setting %d\n", > + pull); > + return ret; > + } > + > + /* enable the write to the equivalent lower bits */ > + data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16); > + rmask = data | (data >> 16); > + data |= (ret << bit); > + > + ret = regmap_update_bits(regmap, reg, rmask, data); > + break; > + default: > + dev_err(info->dev, "unsupported pinctrl type\n"); > + return -EINVAL; > + } > + > + return ret; > +} > + > +static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret; > + u8 bit; > + u32 data; > + > + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); > + if (ret) > + return ret; > + > + ret = regmap_read(regmap, reg, &data); > + if (ret) > + return ret; > + > + data >>= bit; > + return data & 0x1; > +} > + > +static int rockchip_set_schmitt(struct rockchip_pin_bank *bank, > + int pin_num, int enable) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct regmap *regmap; > + int reg, ret; > + u8 bit; > + u32 data, rmask; > + > + dev_dbg(info->dev, "setting input schmitt of GPIO%d-%d to %d\n", > + bank->bank_num, pin_num, enable); > + > + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); > + if (ret) > + return ret; > + > + /* enable the write to the equivalent lower bits */ > + data = BIT(bit + 16) | (enable << bit); > + rmask = BIT(bit + 16) | BIT(bit); > + > + return regmap_update_bits(regmap, reg, rmask, data); > +} > + > +/* > + * Pinmux_ops handling > + */ > + > +static int rockchip_pmx_get_funcs_count(struct pinctrl_dev *pctldev) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + > + return info->nfunctions; > +} > + > +static const char *rockchip_pmx_get_func_name(struct pinctrl_dev *pctldev, > + unsigned int selector) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + > + return info->functions[selector].name; > +} > + > +static int rockchip_pmx_get_groups(struct pinctrl_dev *pctldev, > + unsigned int selector, > + const char * const **groups, > + unsigned int * const num_groups) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + > + *groups = info->functions[selector].groups; > + *num_groups = info->functions[selector].ngroups; > + > + return 0; > +} > + > +static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned int selector, > + unsigned int group) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + const unsigned int *pins = info->groups[group].pins; > + const struct rockchip_pin_config *data = info->groups[group].data; > + struct rockchip_pin_bank *bank; > + int cnt, ret = 0; > + > + dev_dbg(info->dev, "enable function %s group %s\n", > + info->functions[selector].name, info->groups[group].name); > + > + /* > + * for each pin in the pin group selected, program the corresponding > + * pin function number in the config register. > + */ > + for (cnt = 0; cnt < info->groups[group].npins; cnt++) { > + bank = pin_to_bank(info, pins[cnt]); > + ret = rockchip_set_mux(bank, pins[cnt] - bank->pin_base, > + data[cnt].func); > + if (ret) > + break; > + } > + > + if (ret) { > + /* revert the already done pin settings */ > + for (cnt--; cnt >= 0; cnt--) > + rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0); > + > + return ret; > + } > + > + return 0; > +} > + > +static int rockchip_gpio_get_direction(struct gpio_chip *chip, > + unsigned int offset) > +{ > + struct rockchip_pin_bank *bank = gpiochip_get_data(chip); > + u32 data; > + int ret; > + > + ret = clk_enable(bank->clk); > + if (ret < 0) { > + dev_err(bank->drvdata->dev, > + "failed to enable clock for bank %s\n", bank->name); > + return ret; > + } > + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); > + clk_disable(bank->clk); > + > + return !(data & BIT(offset)); > +} > + > +/* > + * The calls to gpio_direction_output() and gpio_direction_input() > + * leads to this function call (via the pinctrl_gpio_direction_{input|output}() > + * function called from the gpiolib interface). > + */ > +static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip, > + int pin, bool input) > +{ > + struct rockchip_pin_bank *bank; > + int ret; > + unsigned long flags; > + u32 data; > + > + bank = gpiochip_get_data(chip); > + > + ret = rockchip_set_mux(bank, pin, RK_FUNC_GPIO); > + if (ret < 0) > + return ret; > + > + clk_enable(bank->clk); > + raw_spin_lock_irqsave(&bank->slock, flags); > + > + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); > + /* set bit to 1 for output, 0 for input */ > + if (!input) > + data |= BIT(pin); > + else > + data &= ~BIT(pin); > + writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); > + > + raw_spin_unlock_irqrestore(&bank->slock, flags); > + clk_disable(bank->clk); > + > + return 0; > +} > + > +static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, > + struct pinctrl_gpio_range *range, > + unsigned int offset, bool input) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + struct gpio_chip *chip; > + int pin; > + > + chip = range->gc; > + pin = offset - chip->base; > + dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n", > + offset, range->name, pin, input ? "input" : "output"); > + > + return _rockchip_pmx_gpio_set_direction(chip, offset - chip->base, > + input); > +} > + > +static const struct pinmux_ops rockchip_pmx_ops = { > + .get_functions_count = rockchip_pmx_get_funcs_count, > + .get_function_name = rockchip_pmx_get_func_name, > + .get_function_groups = rockchip_pmx_get_groups, > + .set_mux = rockchip_pmx_set, > + .gpio_set_direction = rockchip_pmx_gpio_set_direction, > +}; > + > +/* > + * Pinconf_ops handling > + */ > + > +static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, > + enum pin_config_param pull) > +{ > + switch (ctrl->type) { > + case RK2928: > + case RK3128: > + return (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT || > + pull == PIN_CONFIG_BIAS_DISABLE); > + case RK3066B: > + return pull ? false : true; > + case PX30: > + case RV1108: > + case RK3188: > + case RK3288: > + case RK3308: > + case RK3368: > + case RK3399: > + return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT); > + } > + > + return false; > +} > + > +static void rockchip_gpio_set(struct gpio_chip *gc, unsigned int offset, > + int value); > +static int rockchip_gpio_get(struct gpio_chip *gc, unsigned int offset); > + > +/* set the pin config settings for a specified pin */ > +static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, > + unsigned long *configs, > + unsigned int num_configs) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + struct rockchip_pin_bank *bank = pin_to_bank(info, pin); > + enum pin_config_param param; > + u32 arg; > + int i; > + int rc; > + > + for (i = 0; i < num_configs; i++) { > + param = pinconf_to_config_param(configs[i]); > + arg = pinconf_to_config_argument(configs[i]); > + > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + rc = rockchip_set_pull(bank, pin - bank->pin_base, > + param); > + if (rc) > + return rc; > + break; > + case PIN_CONFIG_BIAS_PULL_UP: > + case PIN_CONFIG_BIAS_PULL_DOWN: > + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: > + case PIN_CONFIG_BIAS_BUS_HOLD: > + if (!rockchip_pinconf_pull_valid(info->ctrl, param)) > + return -ENOTSUPP; > + > + if (!arg) > + return -EINVAL; > + > + rc = rockchip_set_pull(bank, pin - bank->pin_base, > + param); > + if (rc) > + return rc; > + break; > + case PIN_CONFIG_OUTPUT: > + rockchip_gpio_set(&bank->gpio_chip, > + pin - bank->pin_base, arg); > + rc = > + _rockchip_pmx_gpio_set_direction(&bank->gpio_chip, > + pin - bank->pin_base, > + false); > + if (rc) > + return rc; > + break; > + case PIN_CONFIG_DRIVE_STRENGTH: > + /* rk3288 is the first with per-pin drive-strength */ > + if (!info->ctrl->drv_calc_reg) > + return -ENOTSUPP; > + > + rc = > + rockchip_set_drive_perpin(bank, > + pin - bank->pin_base, arg); > + if (rc < 0) > + return rc; > + break; > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: > + if (!info->ctrl->schmitt_calc_reg) > + return -ENOTSUPP; > + > + rc = rockchip_set_schmitt(bank, > + pin - bank->pin_base, arg); > + if (rc < 0) > + return rc; > + break; > + default: > + return -ENOTSUPP; > + } > + } /* for each config */ > + > + return 0; > +} > + > +/* get the pin config settings for a specified pin */ > +static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, > + unsigned long *config) > +{ > + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); > + struct rockchip_pin_bank *bank = pin_to_bank(info, pin); > + enum pin_config_param param = pinconf_to_config_param(*config); > + u16 arg; > + int rc; > + > + switch (param) { > + case PIN_CONFIG_BIAS_DISABLE: > + if (rockchip_get_pull(bank, pin - bank->pin_base) != param) > + return -EINVAL; > + > + arg = 0; > + break; > + case PIN_CONFIG_BIAS_PULL_UP: > + case PIN_CONFIG_BIAS_PULL_DOWN: > + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: > + case PIN_CONFIG_BIAS_BUS_HOLD: > + if (!rockchip_pinconf_pull_valid(info->ctrl, param)) > + return -ENOTSUPP; > + > + if (rockchip_get_pull(bank, pin - bank->pin_base) != param) > + return -EINVAL; > + > + arg = 1; > + break; > + case PIN_CONFIG_OUTPUT: > + rc = rockchip_get_mux(bank, pin - bank->pin_base); > + if (rc != RK_FUNC_GPIO) > + return -EINVAL; > + > + rc = rockchip_gpio_get(&bank->gpio_chip, pin - bank->pin_base); > + if (rc < 0) > + return rc; > + > + arg = rc ? 1 : 0; > + break; > + case PIN_CONFIG_DRIVE_STRENGTH: > + /* rk3288 is the first with per-pin drive-strength */ > + if (!info->ctrl->drv_calc_reg) > + return -ENOTSUPP; > + > + rc = rockchip_get_drive_perpin(bank, pin - bank->pin_base); > + if (rc < 0) > + return rc; > + > + arg = rc; > + break; > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: > + if (!info->ctrl->schmitt_calc_reg) > + return -ENOTSUPP; > + > + rc = rockchip_get_schmitt(bank, pin - bank->pin_base); > + if (rc < 0) > + return rc; > + > + arg = rc; > + break; > + default: > + return -ENOTSUPP; > + } > + > + *config = pinconf_to_config_packed(param, arg); > + > + return 0; > +} > + > +static const struct pinconf_ops rockchip_pinconf_ops = { > + .pin_config_get = rockchip_pinconf_get, > + .pin_config_set = rockchip_pinconf_set, > + .is_generic = true, > +}; > + > +static const struct of_device_id rockchip_bank_match[] = { > + { .compatible = "rockchip,gpio-bank" }, > + { .compatible = "rockchip,rk3188-gpio-bank0" }, > + {}, > +}; > + > +static void rockchip_pctrl_child_count(struct rockchip_pinctrl *info, > + struct device_node *np) > +{ > + struct device_node *child; > + > + for_each_child_of_node(np, child) { > + if (of_match_node(rockchip_bank_match, child)) > + continue; > + > + info->nfunctions++; > + info->ngroups += of_get_child_count(child); > + } > +} > + > +static int rockchip_pctrl_parse_groups(struct device_node *np, > + struct rockchip_pin_group *grp, > + struct rockchip_pinctrl *info, > + u32 index) > +{ > + struct rockchip_pin_bank *bank; > + int size; > + const __be32 *list; > + int num; > + int i, j; > + int ret; > + > + dev_dbg(info->dev, "group(%d): %pOFn\n", index, np); > + > + /* Initialise group */ > + grp->name = np->name; > + > + /* > + * the binding format is rockchip,pins = , > + * do sanity check and calculate pins number > + */ > + list = of_get_property(np, "rockchip,pins", &size); > + /* we do not check return since it's safe node passed down */ > + size /= sizeof(*list); > + if (!size || size % 4) { > + dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n"); > + return -EINVAL; > + } > + > + grp->npins = size / 4; > + > + grp->pins = devm_kcalloc(info->dev, grp->npins, sizeof(unsigned int), > + GFP_KERNEL); > + grp->data = devm_kcalloc(info->dev, > + grp->npins, > + sizeof(struct rockchip_pin_config), > + GFP_KERNEL); > + if (!grp->pins || !grp->data) > + return -ENOMEM; > + > + for (i = 0, j = 0; i < size; i += 4, j++) { > + const __be32 *phandle; > + struct device_node *np_config; > + > + num = be32_to_cpu(*list++); > + bank = bank_num_to_bank(info, num); > + if (IS_ERR(bank)) > + return PTR_ERR(bank); > + > + grp->pins[j] = bank->pin_base + be32_to_cpu(*list++); > + grp->data[j].func = be32_to_cpu(*list++); > + > + phandle = list++; > + if (!phandle) > + return -EINVAL; > + > + np_config = of_find_node_by_phandle(be32_to_cpup(phandle)); > + ret = pinconf_generic_parse_dt_config(np_config, NULL, > + &grp->data[j].configs, > + &grp->data[j].nconfigs); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +static int rockchip_pctrl_parse_functions(struct device_node *np, > + struct rockchip_pinctrl *info, > + u32 index) > +{ > + struct device_node *child; > + struct rockchip_pmx_func *func; > + struct rockchip_pin_group *grp; > + int ret; > + static u32 grp_index; > + u32 i = 0; > + > + dev_dbg(info->dev, "parse function(%d): %pOFn\n", index, np); > + > + func = &info->functions[index]; > + > + /* Initialise function */ > + func->name = np->name; > + func->ngroups = of_get_child_count(np); > + if (func->ngroups <= 0) > + return 0; > + > + func->groups = devm_kcalloc(info->dev, func->ngroups, > + sizeof(char *), GFP_KERNEL); > + if (!func->groups) > + return -ENOMEM; > + > + for_each_child_of_node(np, child) { > + func->groups[i] = child->name; > + grp = &info->groups[grp_index++]; > + ret = rockchip_pctrl_parse_groups(child, grp, info, i++); > + if (ret) { > + of_node_put(child); > + return ret; > + } > + } > + > + return 0; > +} > + > +static int rockchip_pctrl_parse_dt(struct platform_device *pdev, > + struct rockchip_pinctrl *info) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + struct device_node *child; > + int ret; > + int i; > + > + rockchip_pctrl_child_count(info, np); > + > + dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); > + dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); > + > + info->functions = devm_kcalloc(dev, info->nfunctions, > + sizeof(struct rockchip_pmx_func), > + GFP_KERNEL); > + if (!info->functions) > + return -EINVAL; > + > + info->groups = devm_kcalloc(dev, info->ngroups, > + sizeof(struct rockchip_pin_group), > + GFP_KERNEL); > + if (!info->groups) > + return -EINVAL; > + > + i = 0; > + > + for_each_child_of_node(np, child) { > + if (of_match_node(rockchip_bank_match, child)) > + continue; > + > + ret = rockchip_pctrl_parse_functions(child, info, i++); > + if (ret) { > + dev_err(&pdev->dev, "failed to parse function\n"); > + of_node_put(child); > + return ret; > + } > + } > + > + return 0; > +} > + > +static int rockchip_pctrl_register(struct platform_device *pdev, > + struct rockchip_pinctrl *info) > +{ > + struct pinctrl_desc *ctrldesc = &info->pctl; > + struct pinctrl_pin_desc *pindesc, *pdesc; > + struct rockchip_pin_bank *pin_bank; > + int pin, bank, ret; > + int k; > + > + ctrldesc->name = "rockchip-pinctrl"; > + ctrldesc->owner = THIS_MODULE; > + ctrldesc->pctlops = &rockchip_pctrl_ops; > + ctrldesc->pmxops = &rockchip_pmx_ops; > + ctrldesc->confops = &rockchip_pinconf_ops; > + > + pindesc = devm_kcalloc(&pdev->dev, > + info->ctrl->nr_pins, sizeof(*pindesc), > + GFP_KERNEL); > + if (!pindesc) > + return -ENOMEM; > + > + ctrldesc->pins = pindesc; > + ctrldesc->npins = info->ctrl->nr_pins; > + > + pdesc = pindesc; > + for (bank = 0, k = 0; bank < info->ctrl->nr_banks; bank++) { > + pin_bank = &info->ctrl->pin_banks[bank]; > + for (pin = 0; pin < pin_bank->nr_pins; pin++, k++) { > + pdesc->number = k; > + pdesc->name = kasprintf(GFP_KERNEL, "%s-%d", > + pin_bank->name, pin); > + pdesc++; > + } > + } > + > + ret = rockchip_pctrl_parse_dt(pdev, info); > + if (ret) > + return ret; > + > + info->pctl_dev = devm_pinctrl_register(&pdev->dev, ctrldesc, info); > + if (IS_ERR(info->pctl_dev)) { > + dev_err(&pdev->dev, "could not register pinctrl driver\n"); > + return PTR_ERR(info->pctl_dev); > + } > + > + for (bank = 0; bank < info->ctrl->nr_banks; ++bank) { > + pin_bank = &info->ctrl->pin_banks[bank]; > + pin_bank->grange.name = pin_bank->name; > + pin_bank->grange.id = bank; > + pin_bank->grange.pin_base = pin_bank->pin_base; > + pin_bank->grange.base = pin_bank->gpio_chip.base; > + pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; > + pin_bank->grange.gc = &pin_bank->gpio_chip; > + pinctrl_add_gpio_range(info->pctl_dev, &pin_bank->grange); > + } > + > + return 0; > +} > + > +/* > + * GPIO handling > + */ > + > +static void rockchip_gpio_set(struct gpio_chip *gc, unsigned int offset, > + int value) > +{ > + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); > + void __iomem *reg = bank->reg_base + GPIO_SWPORT_DR; > + unsigned long flags; > + u32 data; > + > + clk_enable(bank->clk); > + raw_spin_lock_irqsave(&bank->slock, flags); > + > + data = readl(reg); > + data &= ~BIT(offset); > + if (value) > + data |= BIT(offset); > + writel(data, reg); > + > + raw_spin_unlock_irqrestore(&bank->slock, flags); > + clk_disable(bank->clk); > +} > + > +/* > + * Returns the level of the pin for input direction and setting of the DR > + * register for output gpios. > + */ > +static int rockchip_gpio_get(struct gpio_chip *gc, unsigned int offset) > +{ > + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); > + u32 data; > + > + clk_enable(bank->clk); > + data = readl(bank->reg_base + GPIO_EXT_PORT); > + clk_disable(bank->clk); > + data >>= offset; > + data &= 1; > + return data; > +} > + > +/* > + * gpiolib gpio_direction_input callback function. The setting of the pin > + * mux function as 'gpio input' will be handled by the pinctrl subsystem > + * interface. > + */ > +static int rockchip_gpio_direction_input(struct gpio_chip *gc, > + unsigned int offset) > +{ > + return pinctrl_gpio_direction_input(gc->base + offset); > +} > + > +/* > + * gpiolib gpio_direction_output callback function. The setting of the pin > + * mux function as 'gpio output' will be handled by the pinctrl subsystem > + * interface. > + */ > +static int rockchip_gpio_direction_output(struct gpio_chip *gc, > + unsigned int offset, int value) > +{ > + rockchip_gpio_set(gc, offset, value); > + return pinctrl_gpio_direction_output(gc->base + offset); > +} > + > +static void rockchip_gpio_set_debounce(struct gpio_chip *gc, > + unsigned int offset, bool enable) > +{ > + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); > + void __iomem *reg = bank->reg_base + GPIO_DEBOUNCE; > + unsigned long flags; > + u32 data; > + > + clk_enable(bank->clk); > + raw_spin_lock_irqsave(&bank->slock, flags); > + > + data = readl(reg); > + if (enable) > + data |= BIT(offset); > + else > + data &= ~BIT(offset); > + writel(data, reg); > + > + raw_spin_unlock_irqrestore(&bank->slock, flags); > + clk_disable(bank->clk); > +} > + > +/* > + * gpiolib set_config callback function. The setting of the pin > + * mux function as 'gpio output' will be handled by the pinctrl subsystem > + * interface. > + */ > +static int rockchip_gpio_set_config(struct gpio_chip *gc, unsigned int offset, > + unsigned long config) > +{ > + enum pin_config_param param = pinconf_to_config_param(config); > + > + switch (param) { > + /* > + * Rockchip's gpio could only support up to one period > + * of the debounce clock(pclk), which is far away from > + * satisftying the requirement, as pclk is usually near > + * 100MHz shared by all peripherals. So the fact is it > + * has crippled debounce capability could only be useful > + * to prevent any spurious glitches from waking up the system > + * if the gpio is conguired as wakeup interrupt source. Let's > + * still return -ENOTSUPP as before, to make sure the caller > + * of gpiod_set_debounce won't change its behaviour. > + */ > + case PIN_CONFIG_INPUT_DEBOUNCE: > + rockchip_gpio_set_debounce(gc, offset, true); > + return -ENOTSUPP; > + default: > + return -ENOTSUPP; > + } > +} > + > +/* > + * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin > + * and a virtual IRQ, if not already present. > + */ > +static int rockchip_gpio_to_irq(struct gpio_chip *gc, unsigned int offset) > +{ > + struct rockchip_pin_bank *bank = gpiochip_get_data(gc); > + unsigned int virq; > + > + if (!bank->domain) > + return -ENXIO; > + > + virq = irq_create_mapping(bank->domain, offset); > + > + return (virq) ? : -ENXIO; > +} > + > +static const struct gpio_chip rockchip_gpiolib_chip = { > + .request = gpiochip_generic_request, > + .free = gpiochip_generic_free, > + .set = rockchip_gpio_set, > + .get = rockchip_gpio_get, > + .get_direction = rockchip_gpio_get_direction, > + .direction_input = rockchip_gpio_direction_input, > + .direction_output = rockchip_gpio_direction_output, > + .set_config = rockchip_gpio_set_config, > + .to_irq = rockchip_gpio_to_irq, > + .owner = THIS_MODULE, > +}; > + > +/* > + * Interrupt handling > + */ > + > +static void rockchip_irq_demux(struct irq_desc *desc) > +{ > + struct irq_chip *chip = irq_desc_get_chip(desc); > + struct rockchip_pin_bank *bank = irq_desc_get_handler_data(desc); > + u32 pend; > + > + dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name); > + > + chained_irq_enter(chip, desc); > + > + pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS); > + > + while (pend) { > + unsigned int irq, virq; > + > + irq = __ffs(pend); > + pend &= ~BIT(irq); > + virq = irq_linear_revmap(bank->domain, irq); > + > + if (!virq) { > + dev_err(bank->drvdata->dev, "unmapped irq %d\n", irq); > + continue; > + } > + > + dev_dbg(bank->drvdata->dev, "handling irq %d\n", irq); > + > + /* > + * Triggering IRQ on both rising and falling edge > + * needs manual intervention. > + */ > + if (bank->toggle_edge_mode & BIT(irq)) { > + u32 data, data_old, polarity; > + unsigned long flags; > + > + data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT); > + do { > + raw_spin_lock_irqsave(&bank->slock, flags); > + > + polarity = readl_relaxed(bank->reg_base + > + GPIO_INT_POLARITY); > + if (data & BIT(irq)) > + polarity &= ~BIT(irq); > + else > + polarity |= BIT(irq); > + writel(polarity, > + bank->reg_base + GPIO_INT_POLARITY); > + > + raw_spin_unlock_irqrestore(&bank->slock, flags); > + > + data_old = data; > + data = readl_relaxed(bank->reg_base + > + GPIO_EXT_PORT); > + } while ((data & BIT(irq)) != (data_old & BIT(irq))); > + } > + > + generic_handle_irq(virq); > + } > + > + chained_irq_exit(chip, desc); > +} > + > +static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + struct rockchip_pin_bank *bank = gc->private; > + u32 mask = BIT(d->hwirq); > + u32 polarity; > + u32 level; > + u32 data; > + unsigned long flags; > + int ret; > + > + /* make sure the pin is configured as gpio input */ > + ret = rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO); > + if (ret < 0) > + return ret; > + > + clk_enable(bank->clk); > + raw_spin_lock_irqsave(&bank->slock, flags); > + > + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); > + data &= ~mask; > + writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); > + > + raw_spin_unlock_irqrestore(&bank->slock, flags); > + > + if (type & IRQ_TYPE_EDGE_BOTH) > + irq_set_handler_locked(d, handle_edge_irq); > + else > + irq_set_handler_locked(d, handle_level_irq); > + > + raw_spin_lock_irqsave(&bank->slock, flags); > + irq_gc_lock(gc); > + > + level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL); > + polarity = readl_relaxed(gc->reg_base + GPIO_INT_POLARITY); > + > + switch (type) { > + case IRQ_TYPE_EDGE_BOTH: > + bank->toggle_edge_mode |= mask; > + level |= mask; > + > + /* > + * Determine gpio state. If 1 next interrupt should be falling > + * otherwise rising. > + */ > + data = readl(bank->reg_base + GPIO_EXT_PORT); > + if (data & mask) > + polarity &= ~mask; > + else > + polarity |= mask; > + break; > + case IRQ_TYPE_EDGE_RISING: > + bank->toggle_edge_mode &= ~mask; > + level |= mask; > + polarity |= mask; > + break; > + case IRQ_TYPE_EDGE_FALLING: > + bank->toggle_edge_mode &= ~mask; > + level |= mask; > + polarity &= ~mask; > + break; > + case IRQ_TYPE_LEVEL_HIGH: > + bank->toggle_edge_mode &= ~mask; > + level &= ~mask; > + polarity |= mask; > + break; > + case IRQ_TYPE_LEVEL_LOW: > + bank->toggle_edge_mode &= ~mask; > + level &= ~mask; > + polarity &= ~mask; > + break; > + default: > + irq_gc_unlock(gc); > + raw_spin_unlock_irqrestore(&bank->slock, flags); > + clk_disable(bank->clk); > + return -EINVAL; > + } > + > + writel_relaxed(level, gc->reg_base + GPIO_INTTYPE_LEVEL); > + writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY); > + > + irq_gc_unlock(gc); > + raw_spin_unlock_irqrestore(&bank->slock, flags); > + clk_disable(bank->clk); > + > + return 0; > +} > + > +static void rockchip_irq_suspend(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + struct rockchip_pin_bank *bank = gc->private; > + > + clk_enable(bank->clk); > + bank->saved_masks = irq_reg_readl(gc, GPIO_INTMASK); > + irq_reg_writel(gc, ~gc->wake_active, GPIO_INTMASK); > + clk_disable(bank->clk); > +} > + > +static void rockchip_irq_resume(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + struct rockchip_pin_bank *bank = gc->private; > + > + clk_enable(bank->clk); > + irq_reg_writel(gc, bank->saved_masks, GPIO_INTMASK); > + clk_disable(bank->clk); > +} > + > +static void rockchip_irq_enable(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + struct rockchip_pin_bank *bank = gc->private; > + > + clk_enable(bank->clk); > + irq_gc_mask_clr_bit(d); > +} > + > +static void rockchip_irq_disable(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + struct rockchip_pin_bank *bank = gc->private; > + > + irq_gc_mask_set_bit(d); > + clk_disable(bank->clk); > +} > + > +static int rockchip_interrupts_register(struct platform_device *pdev, > + struct rockchip_pinctrl *info) > +{ > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct rockchip_pin_bank *bank = ctrl->pin_banks; > + unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; > + struct irq_chip_generic *gc; > + int ret; > + int i, j; > + > + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { > + if (!bank->valid) { > + dev_warn(&pdev->dev, "bank %s is not valid\n", > + bank->name); > + continue; > + } > + > + ret = clk_enable(bank->clk); > + if (ret) { > + dev_err(&pdev->dev, "failed to enable clock for bank %s\n", > + bank->name); > + continue; > + } > + > + bank->domain = irq_domain_add_linear(bank->of_node, 32, > + &irq_generic_chip_ops, > + NULL); > + if (!bank->domain) { > + dev_warn(&pdev->dev, "could not initialize irq domain for bank %s\n", > + bank->name); > + clk_disable(bank->clk); > + continue; > + } > + > + ret = irq_alloc_domain_generic_chips(bank->domain, 32, 1, > + "rockchip_gpio_irq", > + handle_level_irq, > + clr, 0, > + IRQ_GC_INIT_MASK_CACHE); > + if (ret) { > + dev_err(&pdev->dev, "could not alloc generic chips for bank %s\n", > + bank->name); > + irq_domain_remove(bank->domain); > + clk_disable(bank->clk); > + continue; > + } > + > + /* > + * Linux assumes that all interrupts start out disabled/masked. > + * Our driver only uses the concept of masked and always keeps > + * things enabled, so for us that's all masked and all enabled. > + */ > + writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTMASK); > + writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTEN); > + > + gc = irq_get_domain_generic_chip(bank->domain, 0); > + gc->reg_base = bank->reg_base; > + gc->private = bank; > + gc->chip_types[0].regs.mask = GPIO_INTMASK; > + gc->chip_types[0].regs.ack = GPIO_PORTS_EOI; > + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; > + gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit; > + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit; > + gc->chip_types[0].chip.irq_enable = rockchip_irq_enable; > + gc->chip_types[0].chip.irq_disable = rockchip_irq_disable; > + gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; > + gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; > + gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; > + gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type; > + gc->wake_enabled = IRQ_MSK(bank->nr_pins); > + > + irq_set_chained_handler_and_data(bank->irq, > + rockchip_irq_demux, bank); > + > + /* map the gpio irqs here, when the clock is still running */ > + for (j = 0 ; j < 32 ; j++) > + irq_create_mapping(bank->domain, j); > + > + clk_disable(bank->clk); > + } > + > + return 0; > +} > + > +static int rockchip_gpiolib_register(struct platform_device *pdev, > + struct rockchip_pinctrl *info) > +{ > + struct rockchip_pin_ctrl *ctrl = info->ctrl; > + struct rockchip_pin_bank *bank = ctrl->pin_banks; > + struct gpio_chip *gc; > + int ret; > + int i; > + > + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { > + if (!bank->valid) { > + dev_warn(&pdev->dev, "bank %s is not valid\n", > + bank->name); > + continue; > + } > + > + bank->gpio_chip = rockchip_gpiolib_chip; > + > + gc = &bank->gpio_chip; > + gc->base = bank->pin_base; > + gc->ngpio = bank->nr_pins; > + gc->parent = &pdev->dev; > + gc->of_node = bank->of_node; > + gc->label = bank->name; > + > + ret = gpiochip_add_data(gc, bank); > + if (ret) { > + dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", > + gc->label, ret); > + goto fail; > + } > + } > + > + rockchip_interrupts_register(pdev, info); > + > + return 0; > + > +fail: > + for (--i, --bank; i >= 0; --i, --bank) { > + if (!bank->valid) > + continue; > + gpiochip_remove(&bank->gpio_chip); > + } > + return ret; > +} > + > +static int rockchip_pctrl_get_bank_data(struct rockchip_pin_bank *bank, > + struct rockchip_pinctrl *info) > +{ > + struct resource res; > + void __iomem *base; > + > + if (of_address_to_resource(bank->of_node, 0, &res)) { > + dev_err(info->dev, "cannot find IO resource for bank\n"); > + return -ENOENT; > + } > + > + bank->reg_base = devm_ioremap_resource(info->dev, &res); > + if (IS_ERR(bank->reg_base)) > + return PTR_ERR(bank->reg_base); > + > + /* > + * special case, where parts of the pull setting-registers are > + * part of the PMU register space > + */ > + if (of_device_is_compatible(bank->of_node, > + "rockchip,rk3188-gpio-bank0")) { > + struct device_node *node; > + > + node = of_parse_phandle(bank->of_node->parent, > + "rockchip,pmu", 0); > + if (!node) { > + if (of_address_to_resource(bank->of_node, 1, &res)) { > + dev_err(info->dev, "cannot find IO resource for bank\n"); > + return -ENOENT; > + } > + > + base = devm_ioremap_resource(info->dev, &res); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + rockchip_regmap_config.max_register = > + resource_size(&res) - 4; > + rockchip_regmap_config.name = > + "rockchip,rk3188-gpio-bank0-pull"; > + bank->regmap_pull = > + devm_regmap_init_mmio(info->dev, > + base, > + &rockchip_regmap_config); > + } > + of_node_put(node); > + } > + > + bank->irq = irq_of_parse_and_map(bank->of_node, 0); > + > + bank->clk = of_clk_get(bank->of_node, 0); > + if (IS_ERR(bank->clk)) > + return PTR_ERR(bank->clk); > + > + return clk_prepare(bank->clk); > +} > + > +/* retrieve the soc specific data */ > +static int rockchip_pctrl_get_soc_data(struct platform_device *pdev) > +{ > + struct rockchip_pinctrl *d = platform_get_drvdata(pdev); > + struct rockchip_pin_ctrl *ctrl = d->ctrl; > + struct device_node *np = pdev->dev.of_node; > + struct device_node *child; > + struct rockchip_pin_bank *bank; > + int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j; > + > + for_each_child_of_node(np, child) { > + if (!of_find_property(child, "gpio-controller", NULL)) > + continue; > + > + bank = ctrl->pin_banks; > + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { > + if (!strcmp(bank->name, child->name)) { > + bank->of_node = child; > + > + if (!rockchip_pctrl_get_bank_data(bank, d)) > + bank->valid = true; > + > + break; > + } > + } > + } > + > + grf_offs = ctrl->grf_mux_offset; > + pmu_offs = ctrl->pmu_mux_offset; > + drv_pmu_offs = ctrl->pmu_drv_offset; > + drv_grf_offs = ctrl->grf_drv_offset; > + bank = ctrl->pin_banks; > + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { > + int bank_pins = 0; > + > + raw_spin_lock_init(&bank->slock); > + bank->drvdata = d; > + bank->pin_base = ctrl->nr_pins; > + ctrl->nr_pins += bank->nr_pins; > + > + /* calculate iomux and drv offsets */ > + for (j = 0; j < 4; j++) { > + struct rockchip_iomux *iom = &bank->iomux[j]; > + struct rockchip_drv *drv = &bank->drv[j]; > + int inc; > + > + if (bank_pins >= bank->nr_pins) > + break; > + > + /* preset iomux offset value, set new start value */ > + if (iom->offset >= 0) { > + if (iom->type & IOMUX_SOURCE_PMU) > + pmu_offs = iom->offset; > + else > + grf_offs = iom->offset; > + } else { /* set current iomux offset */ > + iom->offset = (iom->type & IOMUX_SOURCE_PMU) ? > + pmu_offs : grf_offs; > + } > + > + /* preset drv offset value, set new start value */ > + if (drv->offset >= 0) { > + if (iom->type & IOMUX_SOURCE_PMU) > + drv_pmu_offs = drv->offset; > + else > + drv_grf_offs = drv->offset; > + } else { /* set current drv offset */ > + drv->offset = (iom->type & IOMUX_SOURCE_PMU) ? > + drv_pmu_offs : drv_grf_offs; > + } > + > + dev_dbg(d->dev, "bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n", > + i, j, iom->offset, drv->offset); > + > + /* > + * Increase offset according to iomux width. > + * 4bit iomux'es are spread over two registers. > + */ > + inc = (iom->type & (IOMUX_WIDTH_4BIT | > + IOMUX_WIDTH_3BIT | > + IOMUX_WIDTH_2BIT)) ? 8 : 4; > + if (iom->type & IOMUX_SOURCE_PMU) > + pmu_offs += inc; > + else > + grf_offs += inc; > + > + /* > + * Increase offset according to drv width. > + * 3bit drive-strength'es are spread over two registers. > + */ > + if (drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO || > + drv->drv_type == DRV_TYPE_IO_3V3_ONLY) > + inc = 8; > + else > + inc = 4; > + > + if (iom->type & IOMUX_SOURCE_PMU) > + drv_pmu_offs += inc; > + else > + drv_grf_offs += inc; > + > + bank_pins += 8; > + } > + > + /* calculate the per-bank recalced_mask */ > + for (j = 0; j < ctrl->niomux_recalced; j++) { > + int pin = 0; > + > + if (ctrl->iomux_recalced[j].num == bank->bank_num) { > + pin = ctrl->iomux_recalced[j].pin; > + bank->recalced_mask |= BIT(pin); > + } > + } > + > + /* calculate the per-bank route_mask */ > + for (j = 0; j < ctrl->niomux_routes; j++) { > + int pin = 0; > + > + if (ctrl->iomux_routes[j].bank_num == bank->bank_num) { > + pin = ctrl->iomux_routes[j].pin; > + bank->route_mask |= BIT(pin); > + } > + } > + } > + > + return 0; > +} > + > +static int rockchip_pctrl_suspend(struct device *dev) > +{ > + struct rockchip_pinctrl *info = dev_get_drvdata(dev); > + > + if (!info) > + return -EINVAL; > + > + return pinctrl_force_sleep(info->pctl_dev); > +} > + > +static int rockchip_pctrl_resume(struct device *dev) > +{ > + struct rockchip_pinctrl *info = dev_get_drvdata(dev); > + > + if (!info) > + return -EINVAL; > + > + return pinctrl_force_default(info->pctl_dev); > +} > + > +SIMPLE_DEV_PM_OPS(rockchip_pctrl_dev_pm_ops, > + rockchip_pctrl_suspend, > + rockchip_pctrl_resume); > + > +int rockchip_pctrl_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct device_node *child; > + const struct of_device_id *match; > + struct device *dev = &pdev->dev; > + struct rockchip_pinctrl *info; > + int ret; > + > + if (!np) > + return -EINVAL; > + > + match = of_match_device(dev->driver->of_match_table, dev); > + if (!match || !match->data) > + return -EINVAL; > + > + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); > + if (!info) > + return -ENOMEM; > + > + info->dev = dev; > + info->ctrl = (struct rockchip_pin_ctrl *)match->data; > + > + platform_set_drvdata(pdev, info); > + > + ret = rockchip_pctrl_get_soc_data(pdev); > + if (ret) { > + dev_err(dev, "driver data not available\n"); > + return -EINVAL; > + } > + > + child = of_parse_phandle(np, "rockchip,grf", 0); > + if (child) { > + info->regmap_base = syscon_node_to_regmap(child); > + if (IS_ERR(info->regmap_base)) > + return PTR_ERR(info->regmap_base); > + } > + > + child = of_parse_phandle(np, "rockchip,pmu", 0); > + if (child) { > + info->regmap_pmu = syscon_node_to_regmap(child); > + if (IS_ERR(info->regmap_pmu)) > + return PTR_ERR(info->regmap_pmu); > + } > + > + ret = rockchip_pctrl_register(pdev, info); > + if (ret) > + return ret; > + > + ret = rockchip_gpiolib_register(pdev, info); > + if (ret) > + return ret; > + > + return 0; > +} > + > diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip.h b/drivers/pinctrl/rockchip/pinctrl-rockchip.h > new file mode 100644 > index 000000000000..cbf6958206cd > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip.h > @@ -0,0 +1,387 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#ifndef __PINCTRL_ROCKCHIP_H__ > +#define __PINCTRL_ROCKCHIP_H__ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "../core.h" > +#include "../pinconf.h" > + > +enum rockchip_pinctrl_type { > + PX30, > + RV1108, > + RK2928, > + RK3066B, > + RK3128, > + RK3188, > + RK3288, > + RK3308, > + RK3368, > + RK3399, > +}; > + > +/** > + * Encode variants of iomux registers into a type variable > + */ > +#define IOMUX_GPIO_ONLY BIT(0) > +#define IOMUX_WIDTH_4BIT BIT(1) > +#define IOMUX_SOURCE_PMU BIT(2) > +#define IOMUX_UNROUTED BIT(3) > +#define IOMUX_WIDTH_3BIT BIT(4) > +#define IOMUX_WIDTH_2BIT BIT(5) > + > +/** > + * @type: iomux variant using IOMUX_* constants > + * @offset: if initialized to -1 it will be autocalculated, by specifying > + * an initial offset value the relevant source offset can be reset > + * to a new value for autocalculating the following iomux registers. > + */ > +struct rockchip_iomux { > + int type; > + int offset; > +}; > + > +/** > + * enum type index corresponding to rockchip_perpin_drv_list arrays index. > + */ > +enum rockchip_pin_drv_type { > + DRV_TYPE_IO_DEFAULT = 0, > + DRV_TYPE_IO_1V8_OR_3V0, > + DRV_TYPE_IO_1V8_ONLY, > + DRV_TYPE_IO_1V8_3V0_AUTO, > + DRV_TYPE_IO_3V3_ONLY, > + DRV_TYPE_MAX > +}; > + > +/** > + * enum type index corresponding to rockchip_pull_list arrays index. > + */ > +enum rockchip_pin_pull_type { > + PULL_TYPE_IO_DEFAULT = 0, > + PULL_TYPE_IO_1V8_ONLY, > + PULL_TYPE_MAX > +}; > + > +/** > + * @drv_type: drive strength variant using rockchip_perpin_drv_type > + * @offset: if initialized to -1 it will be autocalculated, by specifying > + * an initial offset value the relevant source offset can be reset > + * to a new value for autocalculating the following drive strength > + * registers. if used chips own cal_drv func instead to calculate > + * registers offset, the variant could be ignored. > + */ > +struct rockchip_drv { > + enum rockchip_pin_drv_type drv_type; > + int offset; > +}; > + > +/** > + * @reg_base: register base of the gpio bank > + * @reg_pull: optional separate register for additional pull settings > + * @clk: clock of the gpio bank > + * @irq: interrupt of the gpio bank > + * @saved_masks: Saved content of GPIO_INTEN at suspend time. > + * @pin_base: first pin number > + * @nr_pins: number of pins in this bank > + * @name: name of the bank > + * @bank_num: number of the bank, to account for holes > + * @iomux: array describing the 4 iomux sources of the bank > + * @drv: array describing the 4 drive strength sources of the bank > + * @pull_type: array describing the 4 pull type sources of the bank > + * @valid: is all necessary information present > + * @of_node: dt node of this bank > + * @drvdata: common pinctrl basedata > + * @domain: irqdomain of the gpio bank > + * @gpio_chip: gpiolib chip > + * @grange: gpio range > + * @slock: spinlock for the gpio bank > + * @route_mask: bits describing the routing pins of per bank > + */ > +struct rockchip_pin_bank { > + void __iomem *reg_base; > + struct regmap *regmap_pull; > + struct clk *clk; > + int irq; > + u32 saved_masks; > + u32 pin_base; > + u8 nr_pins; > + char *name; > + u8 bank_num; > + struct rockchip_iomux iomux[4]; > + struct rockchip_drv drv[4]; > + enum rockchip_pin_pull_type pull_type[4]; > + bool valid; > + struct device_node *of_node; > + struct rockchip_pinctrl *drvdata; > + struct irq_domain *domain; > + struct gpio_chip gpio_chip; > + struct pinctrl_gpio_range grange; > + raw_spinlock_t slock; > + u32 toggle_edge_mode; > + u32 recalced_mask; > + u32 route_mask; > +}; > + > +#define PIN_BANK(id, pins, label) \ > + { \ > + .bank_num = id, \ > + .nr_pins = pins, \ > + .name = label, \ > + .iomux = { \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + }, \ > + } > + > +#define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \ > + { \ > + .bank_num = id, \ > + .nr_pins = pins, \ > + .name = label, \ > + .iomux = { \ > + { .type = iom0, .offset = -1 }, \ > + { .type = iom1, .offset = -1 }, \ > + { .type = iom2, .offset = -1 }, \ > + { .type = iom3, .offset = -1 }, \ > + }, \ > + } > + > +#define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \ > + { \ > + .bank_num = id, \ > + .nr_pins = pins, \ > + .name = label, \ > + .iomux = { \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + }, \ > + .drv = { \ > + { .drv_type = type0, .offset = -1 }, \ > + { .drv_type = type1, .offset = -1 }, \ > + { .drv_type = type2, .offset = -1 }, \ > + { .drv_type = type3, .offset = -1 }, \ > + }, \ > + } > + > +#define PIN_BANK_DRV_FLAGS_PULL_FLAGS(id, pins, label, drv0, drv1, \ > + drv2, drv3, pull0, pull1, \ > + pull2, pull3) \ > + { \ > + .bank_num = id, \ > + .nr_pins = pins, \ > + .name = label, \ > + .iomux = { \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + { .offset = -1 }, \ > + }, \ > + .drv = { \ > + { .drv_type = drv0, .offset = -1 }, \ > + { .drv_type = drv1, .offset = -1 }, \ > + { .drv_type = drv2, .offset = -1 }, \ > + { .drv_type = drv3, .offset = -1 }, \ > + }, \ > + .pull_type[0] = pull0, \ > + .pull_type[1] = pull1, \ > + .pull_type[2] = pull2, \ > + .pull_type[3] = pull3, \ > + } > + > +#define PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(id, pins, label, iom0, iom1, \ > + iom2, iom3, drv0, drv1, drv2, \ > + drv3, offset0, offset1, \ > + offset2, offset3) \ > + { \ > + .bank_num = id, \ > + .nr_pins = pins, \ > + .name = label, \ > + .iomux = { \ > + { .type = iom0, .offset = -1 }, \ > + { .type = iom1, .offset = -1 }, \ > + { .type = iom2, .offset = -1 }, \ > + { .type = iom3, .offset = -1 }, \ > + }, \ > + .drv = { \ > + { .drv_type = drv0, .offset = offset0 }, \ > + { .drv_type = drv1, .offset = offset1 }, \ > + { .drv_type = drv2, .offset = offset2 }, \ > + { .drv_type = drv3, .offset = offset3 }, \ > + }, \ > + } > + > +#define PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(id, pins, \ > + label, iom0, iom1, iom2, \ > + iom3, drv0, drv1, drv2, \ > + drv3, offset0, offset1, \ > + offset2, offset3, pull0, \ > + pull1, pull2, pull3) \ > + { \ > + .bank_num = id, \ > + .nr_pins = pins, \ > + .name = label, \ > + .iomux = { \ > + { .type = iom0, .offset = -1 }, \ > + { .type = iom1, .offset = -1 }, \ > + { .type = iom2, .offset = -1 }, \ > + { .type = iom3, .offset = -1 }, \ > + }, \ > + .drv = { \ > + { .drv_type = drv0, .offset = offset0 }, \ > + { .drv_type = drv1, .offset = offset1 }, \ > + { .drv_type = drv2, .offset = offset2 }, \ > + { .drv_type = drv3, .offset = offset3 }, \ > + }, \ > + .pull_type[0] = pull0, \ > + .pull_type[1] = pull1, \ > + .pull_type[2] = pull2, \ > + .pull_type[3] = pull3, \ > + } > + > +/** > + * struct rockchip_mux_recalced_data: represent a pin iomux data. > + * @num: bank number. > + * @pin: pin number. > + * @bit: index at register. > + * @reg: register offset. > + * @mask: mask bit > + */ > +struct rockchip_mux_recalced_data { > + u8 num; > + u8 pin; > + u32 reg; > + u8 bit; > + u8 mask; > +}; > + > +enum rockchip_mux_route_location { > + ROCKCHIP_ROUTE_SAME = 0, > + ROCKCHIP_ROUTE_PMU, > + ROCKCHIP_ROUTE_GRF, > +}; > + > +/** > + * struct rockchip_mux_recalced_data: represent a pin iomux data. > + * @bank_num: bank number. > + * @pin: index at register or used to calc index. > + * @func: the min pin. > + * @route_offset: the max pin. > + * @route_val: the register offset. > + */ > +struct rockchip_mux_route_data { > + u8 bank_num; > + u8 pin; > + u8 func; > + enum rockchip_mux_route_location route_location; > + u32 route_offset; > + u32 route_val; > +}; > + > +/** > + */ > +struct rockchip_pin_ctrl { > + struct rockchip_pin_bank *pin_banks; > + u32 nr_banks; > + u32 nr_pins; > + char *label; > + enum rockchip_pinctrl_type type; > + int grf_mux_offset; > + int pmu_mux_offset; > + int grf_drv_offset; > + int pmu_drv_offset; > + struct rockchip_mux_recalced_data *iomux_recalced; > + u32 niomux_recalced; > + struct rockchip_mux_route_data *iomux_routes; > + u32 niomux_routes; > + > + void (*pull_calc_reg)(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit); > + void (*drv_calc_reg)(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit); > + int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit); > +}; > + > +struct rockchip_pin_config { > + unsigned int func; > + unsigned long *configs; > + unsigned int nconfigs; > +}; > + > +/** > + * struct rockchip_pin_group: represent group of pins of a pinmux function. > + * @name: name of the pin group, used to lookup the group. > + * @pins: the pins included in this group. > + * @npins: number of pins included in this group. > + * @func: the mux function number to be programmed when selected. > + * @configs: the config values to be set for each pin > + * @nconfigs: number of configs for each pin > + */ > +struct rockchip_pin_group { > + const char *name; > + unsigned int npins; > + unsigned int *pins; > + struct rockchip_pin_config *data; > +}; > + > +/** > + * struct rockchip_pmx_func: represent a pin function. > + * @name: name of the pin function, used to lookup the function. > + * @groups: one or more names of pin groups that provide this function. > + * @num_groups: number of groups included in @groups. > + */ > +struct rockchip_pmx_func { > + const char *name; > + const char **groups; > + u8 ngroups; > +}; > + > +struct rockchip_pinctrl { > + struct regmap *regmap_base; > + int reg_size; > + struct regmap *regmap_pull; > + struct regmap *regmap_pmu; > + struct device *dev; > + struct rockchip_pin_ctrl *ctrl; > + struct pinctrl_desc pctl; > + struct pinctrl_dev *pctl_dev; > + struct rockchip_pin_group *groups; > + unsigned int ngroups; > + struct rockchip_pmx_func *functions; > + unsigned int nfunctions; > +}; > + > +extern const struct dev_pm_ops rockchip_pctrl_dev_pm_ops; > + > +int rockchip_pctrl_probe(struct platform_device *pdev); > + > +#endif > diff --git a/drivers/pinctrl/rockchip/pinctrl-rv1108.c b/drivers/pinctrl/rockchip/pinctrl-rv1108.c > new file mode 100644 > index 000000000000..947b65db860b > --- /dev/null > +++ b/drivers/pinctrl/rockchip/pinctrl-rv1108.c > @@ -0,0 +1,214 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020 Rockchip Electronics Co. Ltd. > + */ > + > +#include > +#include > +#include > +#include > + > +#include "pinctrl-rockchip.h" > + > +#define RV1108_PULL_PMU_OFFSET 0x10 > +#define RV1108_PULL_OFFSET 0x110 > +#define RV1108_PULL_PINS_PER_REG 8 > +#define RV1108_PULL_BITS_PER_PIN 2 > +#define RV1108_PULL_BANK_STRIDE 16 > + > +#define RV1108_DRV_PMU_OFFSET 0x20 > +#define RV1108_DRV_GRF_OFFSET 0x210 > +#define RV1108_DRV_BITS_PER_PIN 2 > +#define RV1108_DRV_PINS_PER_REG 8 > +#define RV1108_DRV_BANK_STRIDE 16 > + > +#define RV1108_SCHMITT_PMU_OFFSET 0x30 > +#define RV1108_SCHMITT_GRF_OFFSET 0x388 > +#define RV1108_SCHMITT_BANK_STRIDE 8 > +#define RV1108_SCHMITT_PINS_PER_GRF_REG 16 > +#define RV1108_SCHMITT_PINS_PER_PMU_REG 8 > + > +static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = { > + { > + .num = 1, > + .pin = 0, > + .reg = 0x418, > + .bit = 0, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 1, > + .reg = 0x418, > + .bit = 2, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 2, > + .reg = 0x418, > + .bit = 4, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 3, > + .reg = 0x418, > + .bit = 6, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 4, > + .reg = 0x418, > + .bit = 8, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 5, > + .reg = 0x418, > + .bit = 10, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 6, > + .reg = 0x418, > + .bit = 12, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 7, > + .reg = 0x418, > + .bit = 14, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 8, > + .reg = 0x41c, > + .bit = 0, > + .mask = 0x3 > + }, { > + .num = 1, > + .pin = 9, > + .reg = 0x41c, > + .bit = 2, > + .mask = 0x3 > + }, > +}; > + > +static void rv1108_calc_pull(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 24 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = RV1108_PULL_PMU_OFFSET; > + } else { > + *reg = RV1108_PULL_OFFSET; > + *regmap = info->regmap_base; > + /* correct the offset, as we're starting with the secnod bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * RV1108_PULL_BANK_STRIDE; > + } > + > + *reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4); > + *bit = (pin_num % RV1108_PULL_PINS_PER_REG); > + *bit *= RV1108_PULL_BITS_PER_PIN; > +} > + > +static void rv1108_calc_drv(struct rockchip_pin_bank *bank, > + int pin_num, struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + > + /* The first 24 pins of the first bank are located in PMU */ > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = RV1108_DRV_PMU_OFFSET; > + } else { > + *regmap = info->regmap_base; > + *reg = RV1108_DRV_GRF_OFFSET; > + > + /* correct the offset, as we're starting with the second bank */ > + *reg -= 0x10; > + *reg += bank->bank_num * RV1108_DRV_BANK_STRIDE; > + } > + > + *reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4); > + *bit = pin_num % RV1108_DRV_PINS_PER_REG; > + *bit *= RV1108_DRV_BITS_PER_PIN; > +} > + > +static int rv1108_calc_schmitt(struct rockchip_pin_bank *bank, > + int pin_num, > + struct regmap **regmap, > + int *reg, u8 *bit) > +{ > + struct rockchip_pinctrl *info = bank->drvdata; > + int pins_per_reg; > + > + if (bank->bank_num == 0) { > + *regmap = info->regmap_pmu; > + *reg = RV1108_SCHMITT_PMU_OFFSET; > + pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG; > + } else { > + *regmap = info->regmap_base; > + *reg = RV1108_SCHMITT_GRF_OFFSET; > + pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG; > + *reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE; > + } > + *reg += ((pin_num / pins_per_reg) * 4); > + *bit = pin_num % pins_per_reg; > + > + return 0; > +} > + > +static struct rockchip_pin_bank rv1108_pin_banks[] = { > + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU, > + IOMUX_SOURCE_PMU), > + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), > + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0), > + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0), > +}; > + > +static struct rockchip_pin_ctrl rv1108_pin_ctrl = { > + .pin_banks = rv1108_pin_banks, > + .nr_banks = ARRAY_SIZE(rv1108_pin_banks), > + .label = "RV1108-GPIO", > + .type = RV1108, > + .grf_mux_offset = 0x10, > + .pmu_mux_offset = 0x0, > + .iomux_recalced = rv1108_mux_recalced_data, > + .niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data), > + .pull_calc_reg = rv1108_calc_pull, > + .drv_calc_reg = rv1108_calc_drv, > + .schmitt_calc_reg = rv1108_calc_schmitt, > +}; > + > +static const struct of_device_id rv1108_pinctrl_dt_match[] = { > + { .compatible = "rockchip,rv1108-pinctrl", > + .data = &rv1108_pin_ctrl }, > + {}, > +}; > + > +static struct platform_driver rv1108_pinctrl_driver = { > + .probe = rockchip_pctrl_probe, > + .driver = { > + .name = "rv1108-pinctrl", > + .pm = &rockchip_pctrl_dev_pm_ops, > + .of_match_table = rv1108_pinctrl_dt_match, > + }, > +}; > + > +static int __init rv1108_pinctrl_init(void) > +{ > + return platform_driver_register(&rv1108_pinctrl_driver); > +} > +postcore_initcall(rv1108_pinctrl_init); > + > +MODULE_DESCRIPTION("RV1108 pin control and GPIO driver"); > +MODULE_AUTHOR("Jianqun Xu "); > +MODULE_LICENSE("GPL v2"); >