Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Florian Fainelli <f.fainelli@gmail.com>
To:     linux-kernel@vger.kernel.org
Cc:     Florian Fainelli <f.fainelli@gmail.com>,
        Jens Axboe <axboe@kernel.dk>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Hans de Goede <hdegoede@redhat.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Tejun Heo <tj@kernel.org>, Jaedon Shin <jaedon.shin@gmail.com>,
        linux-ide@vger.kernel.org (open list:LIBATA SUBSYSTEM (Serial and
        Parallel ATA drivers)),
        devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), bcm-kernel-feedback-list@broadcom.com
Subject: [PATCH v4 0/2] ata: ahci_brcm: Follow-up changes for BCM7216
Date:   Fri, 17 Jan 2020 15:53:11 -0800
Message-Id: <20200117235313.14202-1-f.fainelli@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Jens,

These three patches are a follow-up to my previous series titled: ata:
ahci_brcm: Fixes and new device support.

After submitting the BCM7216 RESCAL reset driver, Philipp the reset
controller maintained indicated that the reset line should be self
de-asserting and so reset_control_reset() should be used instead.

These three patches update the driver in that regard. It would be great if
you could apply those and get them queued up for 5.6 since they are
directly related to the previous series.

Changes in v4:

- rebase against latest ata/for-next which included some fixes from
  Arnd that corrected the reset consumer API
- dropped patch #1
- did not add Reviewed-by tags since the patches changed a bit from last
  submission

Changes in v3:
- introduced a preliminary patch making use of the proper reset control
  API in order to manage the optional reset controller line
- updated patches after introducing that preliminary patch

Changes in v2:
- updated error path after moving the reset line control

Thanks!

Florian Fainelli (2):
  ata: ahci_brcm: Perform reset after obtaining resources
  ata: ahci_brcm: BCM7216 reset is self de-asserting

 drivers/ata/ahci_brcm.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

-- 
2.17.1