Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Tue, 21 Jan 2020 10:05:39 +0100
From:   Maxime Ripard <mripard@kernel.org>
To:     Samuel Holland <samuel@sholland.org>
Cc:     Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-sunxi@googlegroups.com
Subject: Re: [PATCH 3/9] arm64: dts: allwinner: pinebook: Remove unused
 AXP803 regulators
Message-ID: <20200121090539.mgswdzfharrfy5ad@gilmour.lan>
References: <20200119163104.13274-1-samuel@sholland.org>
 <20200119163104.13274-3-samuel@sholland.org>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha256;
        protocol="application/pgp-signature"; boundary="hqrw2yi3mykdac3n"
Content-Disposition: inline
In-Reply-To: <20200119163104.13274-3-samuel@sholland.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk


--hqrw2yi3mykdac3n
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On Sun, Jan 19, 2020 at 10:30:58AM -0600, Samuel Holland wrote:
> The Pinebook does not use the CSI bus on the A64. In fact it does not
> use GPIO port E for anything at all. Thus the following regulators are
> not used and do not need voltages set:
>
>  - ALDO1: Connected to VCC-PE only
>  - DLDO3: Not connected
>  - ELDO3: Not connected
>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>  .../boot/dts/allwinner/sun50i-a64-pinebook.dts   | 16 +---------------
>  1 file changed, 1 insertion(+), 15 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> index ff32ca1a495e..8e7ce6ad28dd 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
> @@ -202,9 +202,7 @@
>  };
>
>  &reg_aldo1 {
> -	regulator-min-microvolt = <2800000>;
> -	regulator-max-microvolt = <2800000>;
> -	regulator-name = "vcc-csi";
> +	regulator-name = "vcc-pe";
>  };

If it's connected to PE, I'd expect the voltage to be at 3.3v?

Maxime

--hqrw2yi3mykdac3n
Content-Type: application/pgp-signature; name="signature.asc"

-----BEGIN PGP SIGNATURE-----

iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXia+4wAKCRDj7w1vZxhR
xdmqAQDHlf0hiHmdah98FWedObMJK0sLLs07gbOULXST732ubwEAiMm3wesL11VQ
sadVtj5qmCxatUr+NdthMMN8FOVk6Ac=
=uRwg
-----END PGP SIGNATURE-----

--hqrw2yi3mykdac3n--