Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Message-ID: <0de33b1ae7c52270d11c606ecccc9af5f44d0421.camel@samsung.com>
Subject: Re: [RFC PATCH v3 5/7] devfreq: exynos-bus: Add interconnect
 functionality to exynos-bus
From:   Artur =?UTF-8?Q?=C5=9Awigo=C5=84?= <a.swigon@samsung.com>
To:     Georgi Djakov <georgi.djakov@linaro.org>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-pm@vger.kernel.org, dri-devel@lists.freedesktop.org
Cc:     cw00.choi@samsung.com, myungjoo.ham@samsung.com,
        inki.dae@samsung.com, sw0312.kim@samsung.com,
        leonard.crestez@nxp.com, m.szyprowski@samsung.com,
        b.zolnierkie@samsung.com, krzk@kernel.org
Date:   Fri, 24 Jan 2020 12:22:14 +0100
In-Reply-To: <15795421-db12-8466-bb7e-688e6625cf4a@linaro.org>
Mime-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset="utf-8"
CMS-TYPE: 201P
References: <20191220115653.6487-1-a.swigon@samsung.com>
        <CGME20191220120145eucas1p295af63eed7b23982d8c49fcf875cec8c@eucas1p2.samsung.com>
        <20191220115653.6487-6-a.swigon@samsung.com>
        <15795421-db12-8466-bb7e-688e6625cf4a@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Georgi,

On Wed, 2020-01-22 at 19:02 +0200, Georgi Djakov wrote:
> Hi Artur,
> 
> On 12/20/19 13:56, Artur Świgoń wrote:
> > This patch adds interconnect functionality to the exynos-bus devfreq
> > driver.
> > 
> > The SoC topology is a graph (or, more specifically, a tree) and its
> > edges are specified using the 'exynos,interconnect-parent-node' in the
> > DT. Due to unspecified relative probing order, -EPROBE_DEFER may be
> > propagated to ensure that the parent is probed before its children.
> > 
> > Each bus is now an interconnect provider and an interconnect node as well
> > (cf. Documentation/interconnect/interconnect.rst), i.e. every bus registers
> > itself as a node. Node IDs are not hardcoded but rather assigned at
> 
> Just to note that usually the provider consists of multiple nodes and each node
> represents a single master or slave port on the AXI bus for example. I am not
> sure whether this represents correctly the Exynos hardware, so it's up to
> you.
> 
> > runtime, in probing order (subject to the above-mentioned exception
> > regarding relative order). This approach allows for using this driver with
> > various Exynos SoCs.
> 
> This sounds good. I am wondering whether such dynamic probing would be useful
> for other platforms too. Then maybe it would make sense to even have a common DT
> property, but we will see.
> 
> Is this going to be used only together with devfreq?

Yes, this functions solely as an extension to devfreq, hence the slightly
unusual architecture (one icc_provider/icc_node per devfreq).

(Compared to a singleton icc_provider, this approach yields less code with
a very simple xlate()).

With exactly one icc_node for every devfreq device, I think I will actually
reuse the devfreq ID (as seen in the device name, e.g. the "3" in "devfreq3")
for the node ID. The devfreq framework already does the dynamic numbering
thing that I do in this patch using IDR.

> > Frequencies requested via the interconnect API for a given node are
> > propagated to devfreq using dev_pm_qos_update_request(). Please note that
> > it is not an error when CONFIG_INTERCONNECT is 'n', in which case all
> > interconnect API functions are no-op.
> 
> How about the case where CONFIG_INTERCONNECT=m. Looks like the build will fail
> if CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y, so this dependency should be expressed in
> Kconfig.

I think adding:
	depends on INTERCONNECT || !INTERCONNECT

under ARM_EXYNOS_BUS_DEVFREQ does the trick.

> > 
> > Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
> > ---
> >  drivers/devfreq/exynos-bus.c | 144 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 144 insertions(+)
> > 
> > diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> > index 9fdb188915e8..694a9581dcdb 100644
> > --- a/drivers/devfreq/exynos-bus.c
> > +++ b/drivers/devfreq/exynos-bus.c
> > @@ -14,14 +14,19 @@
> >  #include <linux/devfreq-event.h>
> >  #include <linux/device.h>
> >  #include <linux/export.h>
> > +#include <linux/idr.h>
> > +#include <linux/interconnect-provider.h>
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> >  #include <linux/pm_opp.h>
> > +#include <linux/pm_qos.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/regulator/consumer.h>
> >  
> >  #define DEFAULT_SATURATION_RATIO	40
> >  
> > +#define kbps_to_khz(x) ((x) / 8)
> > +
> >  struct exynos_bus {
> >  	struct device *dev;
> >  
> > @@ -35,6 +40,12 @@ struct exynos_bus {
> >  	struct opp_table *opp_table;
> >  	struct clk *clk;
> >  	unsigned int ratio;
> > +
> > +	/* One provider per bus, one node per provider */
> > +	struct icc_provider provider;
> > +	struct icc_node *node;
> > +
> > +	struct dev_pm_qos_request qos_req;
> >  };
> >  
> >  /*
> > @@ -205,6 +216,39 @@ static void exynos_bus_passive_exit(struct device *dev)
> >  	clk_disable_unprepare(bus->clk);
> >  }
> >  
> > +static int exynos_bus_icc_set(struct icc_node *src, struct icc_node *dst)
> > +{
> > +	struct exynos_bus *src_bus = src->data, *dst_bus = dst->data;
> > +	s32 src_freq = kbps_to_khz(src->avg_bw);
> > +	s32 dst_freq = kbps_to_khz(dst->avg_bw);
> > +	int ret;
> > +
> > +	ret = dev_pm_qos_update_request(&src_bus->qos_req, src_freq);
> > +	if (ret < 0) {
> > +		dev_err(src_bus->dev, "failed to update PM QoS request");
> > +		return ret;
> > +	}
> > +
> > +	ret = dev_pm_qos_update_request(&dst_bus->qos_req, dst_freq);
> > +	if (ret < 0) {
> > +		dev_err(dst_bus->dev, "failed to update PM QoS request");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static struct icc_node *exynos_bus_icc_xlate(struct of_phandle_args *spec,
> > +					     void *data)
> > +{
> > +	struct exynos_bus *bus = data;
> > +
> > +	if (spec->np != bus->dev->of_node)
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	return bus->node;
> > +}
> > +
> >  static int exynos_bus_parent_parse_of(struct device_node *np,
> >  					struct exynos_bus *bus)
> >  {
> > @@ -419,6 +463,96 @@ static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
> >  	return 0;
> >  }
> >  
> > +static struct icc_node *exynos_bus_icc_get_parent(struct exynos_bus *bus)
> > +{
> > +	struct device_node *np = bus->dev->of_node;
> > +	struct of_phandle_args args;
> > +	int num, ret;
> > +
> > +	num = of_count_phandle_with_args(np, "exynos,interconnect-parent-node",
> > +					"#interconnect-cells");
> > +	if (num != 1)
> > +		return NULL; /* parent nodes are optional */
> > +
> > +	ret = of_parse_phandle_with_args(np, "exynos,interconnect-parent-node",
> > +					"#interconnect-cells", 0, &args);
> > +	if (ret < 0)
> > +		return ERR_PTR(ret);
> > +
> > +	of_node_put(args.np);
> > +
> > +	return of_icc_get_from_provider(&args);
> > +}
> > +
> > +static int exynos_bus_icc_init(struct exynos_bus *bus)
> > +{
> > +	static DEFINE_IDA(ida);
> > +
> > +	struct device *dev = bus->dev;
> > +	struct icc_provider *provider = &bus->provider;
> > +	struct icc_node *node, *parent_node;
> > +	int id, ret;
> > +
> > +	/* Initialize the interconnect provider */
> > +	provider->set = exynos_bus_icc_set;
> > +	provider->aggregate = icc_std_aggregate;
> > +	provider->xlate = exynos_bus_icc_xlate;
> > +	provider->dev = dev;
> > +	provider->inter_set = true;
> > +	provider->data = bus;
> > +
> > +	ret = icc_provider_add(provider);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = id = ida_alloc(&ida, GFP_KERNEL);
> > +	if (ret < 0)
> > +		goto err_id;
> > +
> > +	node = icc_node_create(id);
> > +	if (IS_ERR(node)) {
> > +		ret = PTR_ERR(node);
> > +		goto err_node;
> > +	}
> > +
> > +	bus->node = node;
> > +	node->name = dev->of_node->name;
> > +	node->data = bus;
> > +	icc_node_add(node, provider);
> > +
> > +	parent_node = exynos_bus_icc_get_parent(bus);
> > +	if (IS_ERR(parent_node)) {
> > +		ret = PTR_ERR(parent_node);
> > +		goto err_parent;
> > +	}
> > +
> > +	if (parent_node) {
> > +		ret = icc_link_create(node, parent_node->id);
> > +		if (ret < 0)
> > +			goto err_parent;
> > +	}
> > +
> > +	ret = dev_pm_qos_add_request(bus->devfreq->dev.parent, &bus->qos_req,
> > +					DEV_PM_QOS_MIN_FREQUENCY, 0);
> > +	if (ret < 0)
> > +		goto err_request;
> > +
> > +	return 0;
> > +
> > +err_request:
> > +	if (parent_node)
> > +		icc_link_destroy(node, parent_node);
> > +err_parent:
> > +	icc_node_del(node);
> > +	icc_node_destroy(id);
> > +err_node:
> > +	ida_free(&ida, id);
> > +err_id:
> > +	icc_provider_del(provider);
> > +
> > +	return ret;
> > +}
> > +
> >  static int exynos_bus_probe(struct platform_device *pdev)
> >  {
> >  	struct device *dev = &pdev->dev;
> > @@ -468,6 +602,16 @@ static int exynos_bus_probe(struct platform_device *pdev)
> >  	if (ret < 0)
> >  		goto err;
> >  
> > +	/*
> > +	 * Initialize interconnect provider. A return value of -ENOTSUPP means
> > +	 * that CONFIG_INTERCONNECT is disabled.
> > +	 */
> > +	ret = exynos_bus_icc_init(bus);
> > +	if (ret < 0 && ret != -ENOTSUPP) {
> > +		dev_err(dev, "failed to initialize the interconnect provider");
> > +		goto err;
> > +	}
> > +
> >  	max_state = bus->devfreq->profile->max_state;
> >  	min_freq = (bus->devfreq->profile->freq_table[0] / 1000);
> >  	max_freq = (bus->devfreq->profile->freq_table[max_state - 1] / 1000);
> > 
> 
> 
-- 
Artur Świgoń
Samsung R&D Institute Poland
Samsung Electronics